Merge branch 'internal'

apps/Makefile

@@ -1,4 +1,4 @@
-all: cit citin flashprog modt ddtest setmod ddflash setmod2 pls setmod3
+all: cit citin flashprog modt ddtest setmod ddflash setmod2 pls setmod3 modconfig
 
 cit: cit.c
 	$(CC) -o cit cit.c -lpthread
@@ -15,6 +15,9 @@ setmod2: setmod2.c
 setmod3: setmod3.c
 	$(CC) -o setmod3 setmod3.c -I../include/
 
+modconfig: modconfig.c
+	$(CC) -o modconfig modconfig.c -I../include/
+
 %.o: %.c
 	$(CC) $(CFLAGS) -o $@ $<
 

apps/modconfig.c

@@ -0,0 +1,286 @@
+#include <stdio.h>
+#include <stdint.h>
+#include <string.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <sys/ioctl.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <linux/types.h>
+#include <getopt.h>
+#include <ctype.h>
+
+typedef uint8_t u8;
+typedef uint16_t u16;
+typedef int16_t s16;
+typedef uint32_t u32;
+typedef uint64_t u64;
+
+#include "../ddbridge/ddbridge-mci.h"
+#include "../ddbridge/ddbridge-ioctl.h"
+
+struct mconf {
+	int set_output;
+	int set_channels;
+	int fd;
+	
+	struct mci_command channels;
+	struct mci_command stream;
+	struct mci_command output;
+};
+
+void strim(char *s)
+{
+	int l = strlen(s);
+
+	while (l && isspace(s[l-1]))
+		l--;
+	s[l] = 0;
+}
+
+void parse(char *fname, char *sec, void *priv, void (*cb)(void *, char *, char *))
+{
+	char line[256], csec[80], par[80], val[80], *p;
+	FILE *f;
+
+	if ((f = fopen(fname, "r")) == NULL)
+		return;
+	while ((p = fgets(line, sizeof(line), f))) {
+		if (*p == '\r' || *p == '\n' || *p == '#')
+			continue;
+		if (*p == '[') {
+			if ((p = strtok(line + 1, "]")) == NULL)
+				continue;
+			strncpy(csec, p, sizeof(csec));
+			if (!strcmp(sec, csec) && cb)
+				cb(priv, NULL, NULL);
+			continue;
+		}
+		if (!(p = strtok(line, "=")))
+			continue;
+		while (isspace(*p))
+			p++;
+		strncpy(par, p, sizeof(par));
+		strim(par);
+		if (!(p = strtok(NULL, "=")))
+			continue;
+		while (isspace(*p))
+			p++;
+		strncpy (val, p, sizeof(val));
+		strim(val);
+		if (!strcmp(sec, csec) && cb)
+			cb(priv, par, val);
+	}
+	if (!strcmp(sec, csec) && cb)
+		cb(priv, NULL, NULL);
+	fclose(f);
+}
+
+int mci_cmd(int dev, struct mci_command *cmd)
+{
+	int ret;
+	struct ddb_mci_msg msg;
+	uint8_t status;
+
+	msg.link = 0;
+	memcpy(&msg.cmd, cmd, sizeof(msg.cmd));
+	ret = ioctl(dev, IOCTL_DDB_MCI_CMD, &msg);
+	if (ret < 0) {
+		dprintf(2, "mci_cmd error %d\n", errno);
+		return ret;
+	}
+	status = msg.res.status;
+	if (status == MCI_STATUS_OK)
+		return ret;
+	if (status == MCI_STATUS_UNSUPPORTED) {
+		dprintf(2, "Unsupported MCI command\n");
+		return ret;
+	}
+	if (status == MCI_STATUS_INVALID_PARAMETER) {
+		dprintf(2, "Invalid MCI parameters\n");
+		return ret;
+	}
+	return ret;
+}
+
+struct mci_command msg_channels = {
+	.mod_command = MOD_SETUP_CHANNELS,	
+	.mod_channel = 0,
+	.mod_stream = 0,
+	.mod_setup_channels[0] = {
+		.flags = MOD_SETUP_FLAG_FIRST|MOD_SETUP_FLAG_LAST|MOD_SETUP_FLAG_VALID,
+		.standard = MOD_STANDARD_DVBT_8,
+		.num_channels = 25,
+		.frequency = 474000000,
+	},
+};
+
+struct mci_command msg_stream = {
+	.mod_command = MOD_SETUP_STREAM,	
+	.mod_channel = 1,
+	.mod_stream = 0,
+	.mod_setup_stream = {
+		.standard = MOD_STANDARD_DVBT_8,
+		.fft_size = 1,
+		.guard_interval = 0,
+	},
+};
+
+struct mci_command msg_output = {
+	.mod_command = MOD_SETUP_OUTPUT,
+	.mod_channel = 0,
+	.mod_stream = 0,
+	.mod_setup_output = {
+		.connector = MOD_CONNECTOR_F,
+		.num_channels = 16,
+		.unit = MOD_UNIT_DBUV,
+		.channel_power = 5000,
+	},
+};
+
+void output_cb(void *priv, char *par, char *val)
+{
+	struct mconf *mc = (struct mconf *) priv;
+
+	if (!par && !val) {
+		mc->set_output = 1;
+		return;
+	}		
+	if (!strcasecmp(par, "connector")) {
+		if (!strcasecmp(val, "F")) {
+			mc->output.mod_setup_output.connector = MOD_CONNECTOR_F;
+		} else if (!strcasecmp(val, "SMA")) {
+			mc->output.mod_setup_output.connector = MOD_CONNECTOR_SMA;
+		} else if (!strcasecmp(val, "OFF")) {
+			mc->output.mod_setup_output.connector = MOD_CONNECTOR_OFF;
+		} else
+			printf("invalid connector\n");
+	} else if (!strcasecmp(par, "power")) {
+		mc->output.mod_setup_output.channel_power = (uint32_t) (strtod(val, NULL) * 100.0);
+	} else if (!strcasecmp(par, "channels")) {
+		mc->output.mod_setup_output.num_channels = strtol(val, NULL, 10);
+	}else if (!strcasecmp(par, "unit")) {
+		if (!strcasecmp(val, "DBUV")) {
+			mc->output.mod_setup_output.unit = MOD_UNIT_DBUV;
+		} else if (!strcasecmp(val, "DBM")) {
+			mc->output.mod_setup_output.unit = MOD_UNIT_DBM;
+		} else
+			printf("invalid unit\n");
+	} else
+		printf("invalid output parameter: %s\n", par);
+}
+
+void channels_cb(void *priv, char *par, char *val)
+{
+	struct mconf *mc = (struct mconf *) priv;
+
+	if (!par && !val) {
+		mc->set_channels = 1;
+		return;
+	}		
+	if (!strcasecmp(par, "frequency")) {
+		mc->channels.mod_setup_channels[0].frequency =  (uint32_t) (strtod(val, NULL) * 1000000.0);
+		printf("frequency = %u\n", mc->channels.mod_setup_channels[0].frequency);
+	} else if (!strcasecmp(par, "channels")) {
+		mc->channels.mod_setup_channels[0].num_channels = strtol(val, NULL, 10);
+	} else if (!strcasecmp(par, "standard")) {
+		mc->channels.mod_setup_channels[0].standard = strtol(val, NULL, 10);
+	} else if (!strcasecmp(par, "offset")) {
+		mc->channels.mod_setup_channels[0].offset =  (uint32_t) (strtod(val, NULL) * 1000000.0);
+	} else if (!strcasecmp(par, "bandwidth")) {
+		mc->channels.mod_setup_channels[0].bandwidth = (uint32_t) (strtod(val, NULL) * 1000000.0);
+		mc->channels.mod_setup_channels[0].offset =
+			mc->channels.mod_setup_channels[0].bandwidth / 2;
+	} else
+		printf("invalid channels parameter: %s\n", par);
+}
+
+void streams_cb(void *priv, char *par, char *val)
+{
+	struct mconf *mc = (struct mconf *) priv;
+
+	if (!par && !val) {
+		return;
+	}		
+	if (!strcasecmp(par, "fft_size")) {
+		mc->stream.mod_setup_stream.fft_size = strtol(val, NULL, 10);
+	} else if (!strcasecmp(par, "guard_interval")) {
+		mc->stream.mod_setup_stream.guard_interval = strtol(val, NULL, 10);
+	} else if (!strcasecmp(par, "standard")) {
+		mc->stream.mod_setup_stream.standard = strtol(val, NULL, 10);
+	} else if (!strcasecmp(par, "stream_format")) {
+		mc->stream.mod_setup_stream.stream_format = strtol(val, NULL, 10);
+	} else if (!strcasecmp(par, "symbol_rate")) {
+		mc->stream.mod_setup_stream.symbol_rate = (uint32_t) (strtod(val, NULL) * 1000000.0);
+	} else if (!strcasecmp(par, "stream")) {
+		mc->stream.mod_stream = strtol(val, NULL, 10);
+		printf("set stream %u to channel %u\n", mc->stream.mod_stream, mc->stream.mod_channel);
+		mci_cmd(mc->fd, &mc->stream);
+	} else if (!strcasecmp(par, "channel")) {
+		mc->stream.mod_channel = strtol(val, NULL, 10);
+	} else
+		printf("invalid streams parameter: %s\n", par);
+}
+
+int main(int argc, char*argv[])
+{
+	int fd = -1;
+	char fn[128];
+	uint32_t device = 0;
+	uint32_t frequency = 0;
+	char *configname = "modulator.conf";
+	struct mconf mc;
+
+	memset(&mc, 0, sizeof(mc));
+	mc.channels = msg_channels;
+	mc.stream = msg_stream;
+	mc.output = msg_output;
+	
+	while (1) {
+		int cur_optind = optind ? optind : 1;
+		int option_index = 0;
+		int c;
+		static struct option long_options[] = {
+			{"device", required_argument, 0, 'd'},
+			{"config", required_argument, 0, 'c'},
+			{"help", no_argument, 0, 'h'},
+			{0, 0, 0, 0}
+		};
+                c = getopt_long(argc, argv, "d:c:",
+				long_options, &option_index);
+		if (c == -1)
+			break;
+		switch (c) {
+		case 'd':
+			device = strtoul(optarg, NULL, 0);
+			break;
+		case 'c':
+			configname = optarg;
+			break;
+		case 'h':
+			dprintf(2, "modconfig [-d device_number] [-c config_file]\n");
+			break;
+		default:
+			break;
+		}
+	}
+	if (optind < argc) {
+		printf("too many arguments\n");
+		exit(1);
+	}
+	snprintf(fn, 127, "/dev/ddbridge/card%u", device);
+	fd = open(fn, O_RDWR);
+	if (fd < 0) {
+		dprintf(2, "Could not open %s\n", fn);
+		return -1;
+	}
+	mc.fd = fd;
+	parse(configname, "output", (void *) &mc, output_cb);
+	if (mc.set_output)
+		mci_cmd(fd, &mc.output);
+	parse(configname, "channels", (void *) &mc, channels_cb);
+	if (mc.set_channels)
+		mci_cmd(fd, &mc.channels);
+	parse(configname, "streams", (void *) &mc, streams_cb);
+}

apps/modulator.conf

@@ -0,0 +1,51 @@
+[output]
+# connector = OFF, SMA or F
+connector = F
+# number of total channels to be used at the same time
+# use lower number to have fewer channels but stronger signal per channel
+channels = 16
+# unit of power in DBUV or DBM
+unit = DBUV
+# power output in units of above unit
+power = 50.0
+
+
+# define channels:
+# channels are frequency slots to which a stream (mod0, mod1 ...) can be assigned
+
+[channels]
+# standard: 0 = generic, 1 = DVB-T 8MHz, 2 = DVB-T 7 MHz, 3 = DVB-T 6 MHz 
+standard = 1
+
+# numbers of channels to allocate, starting from frequency below
+# this defines 25 channels at 474, 474+8, 474+16, etc. Mhz
+channels = 25
+# frequency of channel 0, following channels are spaced according to set standard
+frequency = 474.0
+
+
+[streams]
+# number of streams depends on the card hardware
+# streams correspond to devices mod0, mod1, ...
+# channels are defined above in channels section
+
+# 0 = 1/32, 1 = 1/16, 2 = 1/8, 3 = 1/4 
+guard_interval = 0
+# 0 = 2K, 1 = 8K  (2K not yet supported)
+fft_size = 1
+
+# all following streams will be set according to the last set other parameters
+
+# example:
+# this would set mod 1 to 474 MHz and mod0 to 482 MHz (474 + 8 MHz)
+# both with guard interval 1/32 and 8K FFT
+# and mod2 to 490MHz, guard interval 1/16 and 8K FFT
+channel = 1
+stream = 0
+#
+channel = 0
+stream = 1
+#
+guard_interval = 1
+channel = 2
+stream = 2

ddbridge/ddbridge-main.c

@@ -312,6 +312,7 @@ static int __devinit ddb_probe(struct pci_dev *pdev,
 	dev->link[0].ids.subvendor = id->subvendor;
 	dev->link[0].ids.subdevice = pdev->subsystem_device;
 	dev->link[0].ids.devid = (id->device << 16) | id->vendor;
+	dev->link[0].ids.revision = pdev->revision;
 
 	dev->link[0].dev = dev;
 	dev->link[0].info = get_ddb_info(id->vendor, id->device,

ddbridge/ddbridge-mci.c

@@ -34,10 +34,16 @@ static int mci_reset(struct ddb_link *link)
 	u32 control;
 	u32 status = 0;
 	u32 timeout = 40;
+	union {
+		u32 u[4];
+		char s[16];
+	} version;
+	u32 vaddr;
 	
-	if (!regmap || ! regmap->mci)
+	if (!regmap || !regmap->mci)
 		return -EINVAL;
 	control = regmap->mci->base;
+	vaddr = regmap->mci_buf->base + 0xf0;
 
 	if ((link->info->type == DDB_OCTOPUS_MCI) &&
 	    (ddblreadl(link, control) & MCI_CONTROL_START_COMMAND)) {
@@ -55,11 +61,17 @@ static int mci_reset(struct ddb_link *link)
 		msleep(50);
 	}
 	dev_info(link->dev->dev, "MCI control port @ %08x\n", control);
+
 	if ((status & MCI_CONTROL_READY) == 0) {
 		dev_err(link->dev->dev, "MCI init failed!\n");
 		return -1;
 	}
+	version.u[0] = ddblreadl(link, vaddr);
+	version.u[1] = ddblreadl(link, vaddr + 4);
+	version.u[2] = ddblreadl(link, vaddr + 8);
+	version.u[3] = ddblreadl(link, vaddr + 12);
 	dev_info(link->dev->dev, "MCI port OK, init time %u msecs\n", (40 - timeout) * 50);
+	dev_info(link->dev->dev, "MCI firmware version %s.%d\n", version.s, version.s[15]);
 	return 0;
 }
 
@@ -108,6 +120,7 @@ static int ddb_mci_cmd_raw_unlocked(struct ddb_link *link,
 					  0xffffff, INTERRUPT_ACK);
 		}
 	}
+	//print_hex_dump(KERN_INFO, "MCI", DUMP_PREFIX_OFFSET, 16, 1, cmd, cmd_len, false);
 	if (res && res_len)
 		for (i = 0; i < res_len; i++)
 			res[i] = ddblreadl(link, result + i * 4);
@@ -166,17 +179,10 @@ int mci_init(struct ddb_link *link)
 int mci_cmd_val(struct ddb_link *link, uint32_t cmd, uint32_t val)
 {
 	struct mci_result result;
-#if 0
-	struct mci_command command = {
-		.command_word = cmd,
-		.params = { val },
-	};
-#else
 	struct mci_command command;
 
 	command.command_word = cmd;
 	command.params[0] = val;
-#endif
 	return ddb_mci_cmd_link(link, &command, &result);
 }
 

ddbridge/ddbridge-mci.h

@@ -185,6 +185,60 @@
 
 #define MCI_SUCCESS(status)     ((status & MCI_STATUS_UNSUPPORTED) == 0)
 
+/********************************************************/
+
+#define MOD_SETUP_CHANNELS      (0x60)
+#define MOD_SETUP_OUTPUT        (0x61)
+#define MOD_SETUP_STREAM        (0x62)
+
+#define MOD_SETUP_FLAG_FIRST    (0x01)
+#define MOD_SETUP_FLAG_LAST     (0x02)
+#define MOD_SETUP_FLAG_VALID    (0x80)
+
+#define MOD_STANDARD_GENERIC    (0x00)
+#define MOD_STANDARD_DVBT_8     (0x01)
+#define MOD_STANDARD_DVBT_7     (0x02)
+#define MOD_STANDARD_DVBT_6     (0x03)
+
+#define MOD_CONNECTOR_OFF       (0x00)
+#define MOD_CONNECTOR_F         (0x01)
+#define MOD_CONNECTOR_SMA       (0x02)
+
+#define MOD_UNIT_DBUV           (0x00)
+#define MOD_UNIT_DBM            (0x01)
+
+#define MOD_FORMAT_DEFAULT      (0x00)
+#define MOD_FORMAT_IQ16         (0x01)
+#define MOD_FORMAT_IQ8          (0x02)
+#define MOD_FORMAT_IDX8         (0x03)
+#define MOD_FORMAT_TS           (0x04)
+
+struct mod_setup_channels {
+	u8   flags;
+	u8   standard;
+	u8   num_channels;
+	u8   rsvd;
+	u32  frequency;
+	u32  offset;            /* used only when Standard == 0 */
+	u32  bandwidth;         /* used only when Standard == 0 */   
+};
+
+struct mod_setup_stream {
+	u8   standard;
+	u8   stream_format;
+	u8   rsvd[2];
+	u32  symbol_rate;        /* only used when Standard doesn't define a fixed symbol rate */
+	u8   fft_size;           /* 0 = 2K, 1 = 8K  (2K yet supported) */
+	u8   guard_interval;     /* 0 = 1/32, 1 = 1/16, 2 = 1/8, 3 = 1/4  (DVB-T Encoding) */
+};
+
+struct mod_setup_output {
+	u8   connector;         /* 0 = OFF, 1 = F, 2 = SMA */ 
+	u8   num_channels;      /* max active channels, determines max power for each channel. */
+	u8   unit;              /* 0 = dBµV, 1 = dBm, */
+	u8   rsvd;
+	s16  channel_power;
+};
 
 /********************************************************/
 
@@ -197,6 +251,12 @@ struct mci_command {
 			u8 demod;
 			u8 output;
 		};
+		struct {
+			u8 mod_command;
+			u8 mod_channel;
+			u8 mod_stream;
+			u8 mod_rsvd1;
+		};
 	};
 	union {
 		u32 params[31];
@@ -307,27 +367,27 @@ struct mci_command {
 		} get_iq_symbol;
 
 		struct {
-			uint8_t   flags; /*  Bit 0 : 0 = VTM/SDR, 1 = SCAN,
+			u8   flags; /*  Bit 0 : 0 = VTM/SDR, 1 = SCAN,
 					     Bit 1: 1 = Disable AGC,
 					     Bit 2: 1 = Set Gain.   */
-			uint8_t   roll_off;
+			u8   roll_off;
-			uint8_t   rsvd1;
+			u8   rsvd1;
-			uint8_t   rsvd2;
+			u8   rsvd2;
-			uint32_t  frequency;
+			u32  frequency;
-			uint32_t  symbol_rate; /* Only in VTM/SDR mode, SCAN Mode uses exactly 1550/24 MSymbols/s.*/
+			u32  symbol_rate; /* Only in VTM/SDR mode, SCAN Mode uses exactly 1550/24 MSymbols/s.*/
-			uint8_t   gain;         /* Gain in 0.25 dB Steps */
+			u8   gain;         /* Gain in 0.25 dB Steps */
 			/* Frequency, symbolrate and gain can be schanged while running */
 		} sx8_start_iq;
 	
 		struct {
-			uint8_t   flags;
+			u8   flags;
                         /*   Bit 0:1 Preamp Mode;  0 = Preamp AGC, 1 == Minimum (~ -17dB) ,
 			     2 = Medium, 3 = Maximum gain {~ 15dB}
 			     Bit 2: Bypass Input LNA (6 dB less gain) (Note this is after Preamp)
 			     Bit 4: Set RF Gain
 			     Bit 5: Freeze RF Gain (Turn AGC off at current gain, only when already enabled)
 			     Bit 7: Optimize RF Gain and freeze for FFT */
-			uint8_t   rf_gain;       /*   0 .. 50 dB */
+			u8   rf_gain;       /*   0 .. 50 dB */
 		} sx8_input_enable;
 		
 		struct {
@@ -344,6 +404,10 @@ struct mci_command {
 		struct {
 			u8   select;        // 0 = Data PLP, 1 = Common PLP, only DVB-T2 and DVB-C2
 		} get_bb_header;
+
+		struct mod_setup_channels mod_setup_channels[4];
+		struct mod_setup_stream mod_setup_stream;
+		struct mod_setup_output mod_setup_output;
 	};
 };
 
@@ -800,7 +864,7 @@ int ddb_mci_get_info(struct mci *mci);
 int ddb_mci_get_strength(struct dvb_frontend *fe);
 void ddb_mci_proc_info(struct mci *mci, struct dtv_frontend_properties *p);
 int mci_init(struct ddb_link *link);
-int mci_cmd_val(struct ddb_link *link, uint32_t cmd, uint32_t val);
+int mci_cmd_val(struct ddb_link *link, u32 cmd, u32 val);
 
 extern struct mci_cfg ddb_max_sx8_cfg;
 extern struct mci_cfg ddb_max_m4_cfg;

ddbridge/ddbridge-modulator.c

@@ -644,7 +644,6 @@ static int mod_set_sdr_attenuator(struct ddb *dev, u32 value)
 static int mod_set_sdr_gain(struct ddb *dev, u32 gain)
 {
 	u32 control = ddbreadl(dev, SDR_CONTROL);
-	struct ddb_link *link = &dev->link[0];
 
 	if (control & 0x01000000) {
 		if (gain > 511)
@@ -659,8 +658,6 @@ static int mod_set_sdr_gain(struct ddb *dev, u32 gain)
 			return -EINVAL;
 		ddbwritel(dev, gain, SDR_GAIN_F);
 	}
-	if (link->mci_ok)
-		mci_cmd_val(link, 0xc0, gain);
 	return 0;
 }
 
@@ -2032,6 +2029,9 @@ static int mod_init_sdr_iq(struct ddb *dev)
 
 	ddbwritel(dev, 0x01, 0x240);
 
+	if (dev->link[0].ids.revision == 1)
+		return 0;
+
 	//mod3_set_base_frequency(dev, 602000000);
 	dev->mod_base.frequency = 570000000;
 	for (i = 0; i < streams; i++) {

ddbridge/ddbridge.h

@@ -143,6 +143,7 @@ struct ddb_ids {
 	u32 regmapid;
 	u32 devid;
 	u32 mac;
+	u8 revision;
 };
 
 struct ddb_info {