From 3cb3df51cf2eb43507a56c898bfabca635301e11 Mon Sep 17 00:00:00 2001 From: none Date: Wed, 7 Apr 2021 19:27:21 +0200 Subject: [PATCH] use correct kernel integer types --- ddbridge/ddbridge-mci.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/ddbridge/ddbridge-mci.h b/ddbridge/ddbridge-mci.h index 5645a9c..e38669e 100644 --- a/ddbridge/ddbridge-mci.h +++ b/ddbridge/ddbridge-mci.h @@ -367,27 +367,27 @@ struct mci_command { } get_iq_symbol; struct { - uint8_t flags; /* Bit 0 : 0 = VTM/SDR, 1 = SCAN, + u8 flags; /* Bit 0 : 0 = VTM/SDR, 1 = SCAN, Bit 1: 1 = Disable AGC, Bit 2: 1 = Set Gain. */ - uint8_t roll_off; - uint8_t rsvd1; - uint8_t rsvd2; - uint32_t frequency; - uint32_t symbol_rate; /* Only in VTM/SDR mode, SCAN Mode uses exactly 1550/24 MSymbols/s.*/ - uint8_t gain; /* Gain in 0.25 dB Steps */ + u8 roll_off; + u8 rsvd1; + u8 rsvd2; + u32 frequency; + u32 symbol_rate; /* Only in VTM/SDR mode, SCAN Mode uses exactly 1550/24 MSymbols/s.*/ + u8 gain; /* Gain in 0.25 dB Steps */ /* Frequency, symbolrate and gain can be schanged while running */ } sx8_start_iq; struct { - uint8_t flags; + u8 flags; /* Bit 0:1 Preamp Mode; 0 = Preamp AGC, 1 == Minimum (~ -17dB) , 2 = Medium, 3 = Maximum gain {~ 15dB} Bit 2: Bypass Input LNA (6 dB less gain) (Note this is after Preamp) Bit 4: Set RF Gain Bit 5: Freeze RF Gain (Turn AGC off at current gain, only when already enabled) Bit 7: Optimize RF Gain and freeze for FFT */ - uint8_t rf_gain; /* 0 .. 50 dB */ + u8 rf_gain; /* 0 .. 50 dB */ } sx8_input_enable; struct { @@ -864,7 +864,7 @@ int ddb_mci_get_info(struct mci *mci); int ddb_mci_get_strength(struct dvb_frontend *fe); void ddb_mci_proc_info(struct mci *mci, struct dtv_frontend_properties *p); int mci_init(struct ddb_link *link); -int mci_cmd_val(struct ddb_link *link, uint32_t cmd, uint32_t val); +int mci_cmd_val(struct ddb_link *link, u32 cmd, u32 val); extern struct mci_cfg ddb_max_sx8_cfg; extern struct mci_cfg ddb_max_m4_cfg;