diff --git a/apps/modulator-c.conf b/apps/modulator-c.conf new file mode 100644 index 0000000..eda485c --- /dev/null +++ b/apps/modulator-c.conf @@ -0,0 +1,58 @@ +[output] +# connector = OFF, SMA or F +connector = F +# number of total channels to be used at the same time +# use lower number to have fewer channels but stronger signal per channel +channels = 16 +# unit of power in DBUV or DBM +unit = DBUV +# power output in units of above unit +power = 70.0 + +# define channels: +# channels are frequency slots to which a stream (mod0, mod1 ...) can be assigned +[channels] +# frequency of channel 0, following channels are spaced according to set standard +frequency = 474.0 +# numbers of channels to allocate, starting from frequency below +# this defines 16 channels at 474, 474+8, 474+16, etc. Mhz +channels = 16 +# standard: 0 = generic, 1 = DVB-T 8MHz, 2 = DVB-T 7 MHz, 3 = DVB-T 6 MHz +standard = DVBC_8 + +[streams] +# number of streams depends on the card hardware +# streams correspond to devices mod0, mod1, ... +# channels are defined above in channels section + +standard = DVBC_8 +stream_format = TS +symbol_rate = 6.9 +modulation = qam_dvbc_256 +rolloff = 13 + +channel = 0 +stream = 0 + +channel = 1 +stream = 1 + +channel = 2 +stream = 2 + +channel = 3 +stream = 3 + +channel = 4 +stream = 4 + +channel = 5 +stream = 5 + +channel = 6 +stream = 6 + +symbol_rate = 6.5 +modulation = qam_dvbc_64 +channel = 7 +stream = 7