f77d50e526
comment out debug messages
2023-09-29 16:59:00 +02:00
454bb63993
use EXPORT_SYMBOL_GPL for frontends to fix problems with kernel 6.5.2
2023-09-12 14:57:09 +02:00
9b458a72de
allow compilation against kerne dvb_core if KERNEL_DVB_CORE defined
2022-02-12 15:14:44 +01:00
1b49bfb8f1
use dd_compat file and adjust fallthroughs
2022-02-12 15:07:59 +01:00
60646a6b26
experimental diseqc receive code
2021-03-11 22:33:13 +01:00
7efa935a30
remove debug messages
2021-02-24 20:20:10 +01:00
fc728ab51e
only report I2C errors after probing is done
2021-02-24 20:19:06 +01:00
7f19a0c04b
adapt to current mainline kernel dvb-core
2020-08-29 15:32:42 +02:00
b3848a362d
add multistream flags
...
some user space software needs this for T2 mutlistream
(although it makes no sense, T2 always demands multistream capability)
2020-01-18 16:24:54 +01:00
fe80bc1154
- remove unused code
...
- only report warning on FW failure
2020-01-18 16:24:54 +01:00
1784a361ad
add block error counts
2019-11-08 13:51:11 +01:00
60b374ac2a
initialize cnr_db
2019-08-13 21:39:10 +02:00
d3d574c13c
change KBUILD_EXTMOD
2019-08-12 21:37:16 +02:00
a6f981eb04
comment out unused parts
2019-02-14 20:53:43 +01:00
d422786f00
comment out unused parts
2019-02-14 20:53:10 +01:00
530f9d130a
remove burst (does not work with some switches)
2019-02-13 12:01:38 +01:00
f2d3efd577
comment out unused function
2019-02-13 12:01:22 +01:00
4e95332ced
comment out unused function
2019-02-13 12:00:22 +01:00
3c3430cdbc
remove or comment out some unused code
2019-02-13 11:58:57 +01:00
bc2e1a39ff
add tsspeed override
2018-08-10 08:47:29 +02:00
6089b4f5c2
wip: stv0910: Adapt symbolrate in blindscan mode
...
The blindscan mode searches for a symbolrate-range of +/-25% around the
given start value. To ensure that the highes scanned symbolrate could be
received at all the frontend must be configured to set the
basebandfilter for this symbolrate. Thus increase the symbolrate which
is given to the frontend by 25%.
2018-07-28 14:12:59 +02:00
8521ce4753
wip: stv0910: Add blindscan mode
...
Allow to use the AEP blind scan mode, which autodetects symbol rate
within a +/-25% range of the given symbol rate. Currently this is
enabled by using the lsb of symbol rate as a flag. This is hackish and
shall better be replaced by a dedicated dtv property.
2018-07-28 12:47:18 +02:00
43ab548777
Ensure CAM stability after reset
...
Wait 2 secs in low level CI reset function as some CAMs become crazy
if we talk to them just after the reset (SmarDTV / TDT Premium).
from: faudebert-anevia authored and Richard Bérichon committed on Apr 2, 2012
2018-07-20 13:18:27 +02:00
186ba6d414
change clock phase to prevent cross-talk on some hardware
...
(this value is better than the previously suggested change to 0xe0)
2018-07-18 09:41:24 +02:00
e13cec82e4
Return correct frequency
...
Signed-off-by: Julian Scheel <julian@jusst.de>
2018-05-28 16:40:43 +02:00
d13416157c
remove unused offs
2018-05-28 16:40:02 +02:00
755f502602
set array size to 4
2018-05-28 16:39:42 +02:00
a05d1852a3
Set modulation to QPSK for DVB-S
...
Signed-off-by: Julian Scheel <julian@jusst.de>
2018-05-28 16:39:21 +02:00
d0f7b9be1f
uncomment send_burst for legacy hardware and replace some register setting
...
functions with new version.
2018-03-28 19:47:26 +02:00
6b0feea253
add ULL
2018-03-28 19:46:31 +02:00
bed4be534a
add cast
2018-03-28 19:44:15 +02:00
3db30defab
use correct MODULE_LINCESE for GPL v2 only according to notice in header
2018-03-22 19:32:17 +01:00
991393950b
use svalue instead if uvalue for signed values
2018-02-12 22:47:31 +01:00
642a010be6
make get_frontend report current DVB-S2 roll-off
2018-01-16 23:53:13 +01:00
4f136e5659
change pls to official scrambling_sequence_index
2018-01-16 23:50:40 +01:00
2eb3b3e723
add init values for TSINSDELM/L
2018-01-02 19:58:33 +01:00
02b292987b
remove extra DVB-T frontend parameter
2018-01-01 21:02:33 +01:00
c5b45cdbac
remove extra parameter fro DVB-T frontend
2018-01-01 21:00:11 +01:00
23826d9981
increase TS output speed for parallel connections
2017-12-27 22:17:36 +01:00
da3539c994
remove mistakenly added transmission mode 64K
2017-12-27 22:11:17 +01:00
d87246de12
throw a warning on double unlocks
...
based on patch by Daniel Scheller
2017-12-12 10:19:52 +01:00
b54e6ed689
do not try to close gate if opening it failed
2017-12-12 01:52:14 +01:00
3b44e78bd0
Move get_cur_symbol_rate call to get_frontend()
2017-12-12 01:38:22 +01:00
b814026565
- simplify init_search_param() with new register access functions
...
- add stream id 0x80000000 to set streaming mode
2017-12-05 19:57:08 +01:00
ca3c26808f
simply enable_puncture_rate
2017-10-27 13:11:11 +02:00
9e5576c562
add field and register reading/writing macros
2017-10-25 23:13:26 +02:00
021eae2eac
simplify i2c functions
2017-10-25 23:07:43 +02:00
8fa925317c
fix typo: 0190 instead of 0910
2017-10-16 11:25:05 +02:00
8a1f27c3d2
add field offset to field defines
2017-10-11 14:32:01 +02:00
6bdfe43958
remove accidentally committed test code
2017-10-03 20:49:45 +02:00
internal
rjkm
none
Ralph Metzler
Julian Scheel