f77d50e526
comment out debug messages
2023-09-29 16:59:00 +02:00
60646a6b26
experimental diseqc receive code
2021-03-11 22:33:13 +01:00
7f19a0c04b
adapt to current mainline kernel dvb-core
2020-08-29 15:32:42 +02:00
530f9d130a
remove burst (does not work with some switches)
2019-02-13 12:01:38 +01:00
f2d3efd577
comment out unused function
2019-02-13 12:01:22 +01:00
bc2e1a39ff
add tsspeed override
2018-08-10 08:47:29 +02:00
6089b4f5c2
wip: stv0910: Adapt symbolrate in blindscan mode
...
The blindscan mode searches for a symbolrate-range of +/-25% around the
given start value. To ensure that the highes scanned symbolrate could be
received at all the frontend must be configured to set the
basebandfilter for this symbolrate. Thus increase the symbolrate which
is given to the frontend by 25%.
2018-07-28 14:12:59 +02:00
8521ce4753
wip: stv0910: Add blindscan mode
...
Allow to use the AEP blind scan mode, which autodetects symbol rate
within a +/-25% range of the given symbol rate. Currently this is
enabled by using the lsb of symbol rate as a flag. This is hackish and
shall better be replaced by a dedicated dtv property.
2018-07-28 12:47:18 +02:00
186ba6d414
change clock phase to prevent cross-talk on some hardware
...
(this value is better than the previously suggested change to 0xe0)
2018-07-18 09:41:24 +02:00
d13416157c
remove unused offs
2018-05-28 16:40:02 +02:00
755f502602
set array size to 4
2018-05-28 16:39:42 +02:00
a05d1852a3
Set modulation to QPSK for DVB-S
...
Signed-off-by: Julian Scheel <julian@jusst.de>
2018-05-28 16:39:21 +02:00
d0f7b9be1f
uncomment send_burst for legacy hardware and replace some register setting
...
functions with new version.
2018-03-28 19:47:26 +02:00
6b0feea253
add ULL
2018-03-28 19:46:31 +02:00
3db30defab
use correct MODULE_LINCESE for GPL v2 only according to notice in header
2018-03-22 19:32:17 +01:00
991393950b
use svalue instead if uvalue for signed values
2018-02-12 22:47:31 +01:00
642a010be6
make get_frontend report current DVB-S2 roll-off
2018-01-16 23:53:13 +01:00
4f136e5659
change pls to official scrambling_sequence_index
2018-01-16 23:50:40 +01:00
2eb3b3e723
add init values for TSINSDELM/L
2018-01-02 19:58:33 +01:00
23826d9981
increase TS output speed for parallel connections
2017-12-27 22:17:36 +01:00
d87246de12
throw a warning on double unlocks
...
based on patch by Daniel Scheller
2017-12-12 10:19:52 +01:00
3b44e78bd0
Move get_cur_symbol_rate call to get_frontend()
2017-12-12 01:38:22 +01:00
b814026565
- simplify init_search_param() with new register access functions
...
- add stream id 0x80000000 to set streaming mode
2017-12-05 19:57:08 +01:00
ca3c26808f
simply enable_puncture_rate
2017-10-27 13:11:11 +02:00
9e5576c562
add field and register reading/writing macros
2017-10-25 23:13:26 +02:00
021eae2eac
simplify i2c functions
2017-10-25 23:07:43 +02:00
8fa925317c
fix typo: 0190 instead of 0910
2017-10-16 11:25:05 +02:00
6bdfe43958
remove accidentally committed test code
2017-10-03 20:49:45 +02:00
83000cd73a
handle gate control errors
2017-10-02 00:54:53 +02:00
1c22a07eaa
adapt dvb-core, includes and affected files to mainline 4.14-rc2
2017-09-26 22:09:05 +02:00
4765eac57a
optimize stat checks and only allow stat checks once a second
2017-09-20 21:00:21 +02:00
92b64711ec
strict checkpatch style adjustments
2017-09-16 15:31:52 +02:00
df4f23384b
lower lowest symbol rate to 100000
2017-08-25 23:30:28 +02:00
d3ca949ec5
wrong bitmask for compatibility mode
2017-07-29 14:47:57 +02:00
7222bd58b3
change lock check order
2017-07-11 20:37:38 +02:00
f404b3fb6d
add multi-stream capability announcement
2017-07-11 20:36:52 +02:00
de34e2ebbd
correct array access
2017-07-11 20:29:20 +02:00
c56f593a4c
add support for single demod mode for testing high bit rates
2017-02-06 12:48:48 +01:00
a4c275895d
missing init for status
2016-09-05 14:25:43 +02:00
4f452819df
Set input IQ swap to match hardware, fiexes sign issue with offset
2016-08-31 18:46:07 +02:00
a1221c6e4e
always interpret pls code as gold code
2016-07-31 21:39:20 +02:00
2c8fcc1df5
change physical layer scrambling API to DTV_PLS and support old API
...
mixed with DTV_STREAM_ID
2016-06-16 15:42:18 +02:00
8908df8098
add support for DVB-S2 scrambling code and ISI
2016-06-08 12:13:16 +02:00
80e0750c71
adapt to latest windows driver version
2016-05-31 17:01:46 +02:00
a8d5d5b50d
stv0910 fixed typo in get frequency offset
2016-05-10 11:49:09 +02:00
535ffa6ca6
show tuning offset
2016-05-03 22:05:18 +02:00
1b0df5fcfa
octopro fixes
2016-05-02 16:27:32 +02:00
6d80791077
increase transportstream speed on stv0910
2016-04-11 18:26:21 +02:00
c18503fcad
fix stv0910 strength and snr values
2016-04-11 18:25:29 +02:00
906efafd5e
correct signal strength
2016-04-11 18:25:07 +02:00
internal
none
Ralph Metzler
Julian Scheel
mvoelkel