366 Commits

Author	SHA1	Message	Date
rjkm	8bda007f05	add MCI registers for FSM	2021-12-06 14:54:51 +01:00
rjkm	b606a7b2b2	increase wit time after powerup and before reset to 300ms ... Signed-off-by: rjkm <none>	2021-09-23 15:07:00 +02:00
rjkm	719ac4d231	remove workqueue and threaded interrupt modes, they are too laggy	2021-09-19 19:05:05 +02:00
rjkm	b23187a049	Add module paramaters for SX8 tuner flags and gain.	2021-08-08 22:14:42 +02:00
rjkm	0165538f13	prepare to get roll off for SDR mode from parameters but use fixed one ... for now	2021-08-07 23:00:29 +02:00
rjkm	0b9d3ffa6b	move lut for use in other functions	2021-08-07 22:57:40 +02:00
rjkm	f7fcc1511d	add extended stats	2021-08-07 22:30:10 +02:00
rjkm	37ae102d57	use correct u8 type	2021-08-07 22:30:01 +02:00
rjkm	66b1cf3623	new signal loss counter field	2021-08-07 22:29:17 +02:00
rjkm	7f002f1356	add 7/8 to offset 4	2021-08-07 22:28:42 +02:00
rjkm	418bd83b40	only set tuner flags once	2021-07-05 18:42:05 +02:00
none	c23435e275	handle revision 1 mods differently	2021-06-23 11:18:35 +02:00
none	8f5af7742d	do not use workqueues by dfault, they can lead to dma overflows	2021-06-22 20:51:28 +02:00
none	e1e569975f	add FW version to output	2021-06-06 20:23:43 +02:00
none	b9998ee9e2	add new structs	2021-06-06 20:23:06 +02:00
none	8039097426	add support for FE_TIMEDOUT	2021-05-26 22:39:27 +02:00
mvoelkel	f3d5adc777	added puncture_rate to modulator stream setup	2021-04-17 21:03:05 +02:00
none	50e354c49a	cleanup	2021-04-07 19:29:53 +02:00
none	a5ad0b0584	show MCI firmware version	2021-04-07 19:28:12 +02:00
none	3cb3df51cf	use correct kernel integer types	2021-04-07 19:27:21 +02:00
none	2311b94970	add modulator MCI commands	2021-04-07 19:25:32 +02:00
none	f12fe91b51	use PCI revision to determine major firmware version	2021-04-07 19:21:24 +02:00
none	35c283bf2f	remove test command	2021-04-07 19:20:38 +02:00
none	41a9626be4	remove unnused variable	2021-04-07 19:20:24 +02:00
none	a6c3b82f83	make include usable in user space	2021-03-18 13:48:09 +01:00
none	e863a2037a	add byte array to union	2021-03-18 13:47:45 +01:00
none	92cd675f5d	move ddbridge ioctls to separate file	2021-03-18 12:39:41 +01:00
none	dda8698514	add timeout status	2021-03-18 10:45:53 +01:00
none	fc9a89c870	add per demod lock for more fine-grained locking	2021-03-18 10:44:11 +01:00
none	4b0a0c4ff2	allow explicit setting of roll-off	2021-03-18 10:39:07 +01:00
none	c3c734b0e8	remove unsused variables and code	2021-03-11 23:23:30 +01:00
none	8380cb185f	change direct_mode to module parameter	2021-03-11 23:22:03 +01:00
none	f9eb03a065	remove unused entries	2021-03-11 23:20:31 +01:00
none	f8c97ad3d6	remove init dump, cannot access regs directly on all platforms	2021-03-11 22:43:12 +01:00
none	de0e970999	change input locked in fmode=4 and do not send emulated sequence as diseqc	2021-03-11 22:31:52 +01:00
none	cf35c3038b	only get status if demod started	2021-03-10 22:03:56 +01:00
none	a2d39f90d5	add module parameter for disabling voltage output in Max cards.	2021-03-09 20:21:09 +01:00
none	7af71dfdcb	lock ldpc bitrate adjustment to prevent race condition during tuner stop	2021-03-09 14:23:06 +01:00
none	b025599e9f	dump more buffer bytes in case of misalignment	2021-03-01 12:58:54 +01:00
none	9028e75f63	always use unaligned processing if detected once	2021-03-01 12:58:21 +01:00
none	177e6b0fd6	check if memory is aligned to 4K	2021-03-01 12:57:45 +01:00
none	de82a50b4e	Set allocated memory to zero.	2021-03-01 12:57:20 +01:00
none	01ca1b8805	Detect and report TS misalignment and switch to unaligned processing.	2021-02-25 14:58:42 +01:00
none	28e09191af	Do not attach dummy with dvb attach.	2021-02-25 14:57:33 +01:00
none	abb2c56ddc	output overflow as warning	2021-02-24 20:30:45 +01:00
none	c6ada48892	remove check for MCI base	2021-02-24 20:27:42 +01:00
none	baf6a090b8	use packet loss function	2021-02-24 20:25:27 +01:00
none	d259d69808	add packet loss function	2021-02-24 20:24:14 +01:00
none	f72c7b2256	print MCI info	2021-02-24 20:22:36 +01:00
none	c82c9d3218	old GCC does not like init in struct	2021-02-24 20:22:08 +01:00