rjkm
1b49bfb8f1
use dd_compat file and adjust fallthroughs
2022-02-12 15:07:59 +01:00
none
60646a6b26
experimental diseqc receive code
2021-03-11 22:33:13 +01:00
none
7efa935a30
remove debug messages
2021-02-24 20:20:10 +01:00
none
fc728ab51e
only report I2C errors after probing is done
2021-02-24 20:19:06 +01:00
none
7f19a0c04b
adapt to current mainline kernel dvb-core
2020-08-29 15:32:42 +02:00
none
b3848a362d
add multistream flags
...
some user space software needs this for T2 mutlistream
(although it makes no sense, T2 always demands multistream capability)
2020-01-18 16:24:54 +01:00
none
fe80bc1154
- remove unused code
...
- only report warning on FW failure
2020-01-18 16:24:54 +01:00
Ralph Metzler
1784a361ad
add block error counts
2019-11-08 13:51:11 +01:00
Ralph Metzler
60b374ac2a
initialize cnr_db
2019-08-13 21:39:10 +02:00
Ralph Metzler
d3d574c13c
change KBUILD_EXTMOD
2019-08-12 21:37:16 +02:00
Ralph Metzler
a6f981eb04
comment out unused parts
2019-02-14 20:53:43 +01:00
Ralph Metzler
d422786f00
comment out unused parts
2019-02-14 20:53:10 +01:00
Ralph Metzler
530f9d130a
remove burst (does not work with some switches)
2019-02-13 12:01:38 +01:00
Ralph Metzler
f2d3efd577
comment out unused function
2019-02-13 12:01:22 +01:00
Ralph Metzler
4e95332ced
comment out unused function
2019-02-13 12:00:22 +01:00
Ralph Metzler
3c3430cdbc
remove or comment out some unused code
2019-02-13 11:58:57 +01:00
Ralph Metzler
bc2e1a39ff
add tsspeed override
2018-08-10 08:47:29 +02:00
Julian Scheel
6089b4f5c2
wip: stv0910: Adapt symbolrate in blindscan mode
...
The blindscan mode searches for a symbolrate-range of +/-25% around the
given start value. To ensure that the highes scanned symbolrate could be
received at all the frontend must be configured to set the
basebandfilter for this symbolrate. Thus increase the symbolrate which
is given to the frontend by 25%.
2018-07-28 14:12:59 +02:00
Julian Scheel
8521ce4753
wip: stv0910: Add blindscan mode
...
Allow to use the AEP blind scan mode, which autodetects symbol rate
within a +/-25% range of the given symbol rate. Currently this is
enabled by using the lsb of symbol rate as a flag. This is hackish and
shall better be replaced by a dedicated dtv property.
2018-07-28 12:47:18 +02:00
Ralph Metzler
43ab548777
Ensure CAM stability after reset
...
Wait 2 secs in low level CI reset function as some CAMs become crazy
if we talk to them just after the reset (SmarDTV / TDT Premium).
from: faudebert-anevia authored and Richard Bérichon committed on Apr 2, 2012
2018-07-20 13:18:27 +02:00
Ralph Metzler
186ba6d414
change clock phase to prevent cross-talk on some hardware
...
(this value is better than the previously suggested change to 0xe0)
2018-07-18 09:41:24 +02:00
Ralph Metzler
e13cec82e4
Return correct frequency
...
Signed-off-by: Julian Scheel <julian@jusst.de>
2018-05-28 16:40:43 +02:00
Ralph Metzler
d13416157c
remove unused offs
2018-05-28 16:40:02 +02:00
Ralph Metzler
755f502602
set array size to 4
2018-05-28 16:39:42 +02:00
Ralph Metzler
a05d1852a3
Set modulation to QPSK for DVB-S
...
Signed-off-by: Julian Scheel <julian@jusst.de>
2018-05-28 16:39:21 +02:00
Ralph Metzler
d0f7b9be1f
uncomment send_burst for legacy hardware and replace some register setting
...
functions with new version.
2018-03-28 19:47:26 +02:00
Ralph Metzler
6b0feea253
add ULL
2018-03-28 19:46:31 +02:00
Ralph Metzler
bed4be534a
add cast
2018-03-28 19:44:15 +02:00
Ralph Metzler
3db30defab
use correct MODULE_LINCESE for GPL v2 only according to notice in header
2018-03-22 19:32:17 +01:00
Ralph Metzler
991393950b
use svalue instead if uvalue for signed values
2018-02-12 22:47:31 +01:00
Ralph Metzler
642a010be6
make get_frontend report current DVB-S2 roll-off
2018-01-16 23:53:13 +01:00
Ralph Metzler
4f136e5659
change pls to official scrambling_sequence_index
2018-01-16 23:50:40 +01:00
Ralph Metzler
2eb3b3e723
add init values for TSINSDELM/L
2018-01-02 19:58:33 +01:00
Ralph Metzler
02b292987b
remove extra DVB-T frontend parameter
2018-01-01 21:02:33 +01:00
Ralph Metzler
c5b45cdbac
remove extra parameter fro DVB-T frontend
2018-01-01 21:00:11 +01:00
Ralph Metzler
23826d9981
increase TS output speed for parallel connections
2017-12-27 22:17:36 +01:00
Ralph Metzler
da3539c994
remove mistakenly added transmission mode 64K
2017-12-27 22:11:17 +01:00
Ralph Metzler
d87246de12
throw a warning on double unlocks
...
based on patch by Daniel Scheller
2017-12-12 10:19:52 +01:00
Ralph Metzler
b54e6ed689
do not try to close gate if opening it failed
2017-12-12 01:52:14 +01:00
Ralph Metzler
3b44e78bd0
Move get_cur_symbol_rate call to get_frontend()
2017-12-12 01:38:22 +01:00
Ralph Metzler
b814026565
- simplify init_search_param() with new register access functions
...
- add stream id 0x80000000 to set streaming mode
2017-12-05 19:57:08 +01:00
Ralph Metzler
ca3c26808f
simply enable_puncture_rate
2017-10-27 13:11:11 +02:00
Ralph Metzler
9e5576c562
add field and register reading/writing macros
2017-10-25 23:13:26 +02:00
Ralph Metzler
021eae2eac
simplify i2c functions
2017-10-25 23:07:43 +02:00
Ralph Metzler
8fa925317c
fix typo: 0190 instead of 0910
2017-10-16 11:25:05 +02:00
Ralph Metzler
8a1f27c3d2
add field offset to field defines
2017-10-11 14:32:01 +02:00
Ralph Metzler
6bdfe43958
remove accidentally committed test code
2017-10-03 20:49:45 +02:00
Ralph Metzler
83000cd73a
handle gate control errors
2017-10-02 00:54:53 +02:00
Ralph Metzler
b5ae7ac76f
adapt cxd2099 to mainline 4.14-rc2
2017-09-26 22:09:05 +02:00
Ralph Metzler
1c22a07eaa
adapt dvb-core, includes and affected files to mainline 4.14-rc2
2017-09-26 22:09:05 +02:00
