0.9.29 compiles with most kernels up to 4.11.1

see git commit messages for newer changes

0.9.24 2016.08.03
- suport new V2 modulator cards

0.9.19c 2015.07.20
- MAX S8:
  do not turn on diseqc and tuners on init
  of to save power
  turn off tuners when not used
- support new Octopus CI in flashprog

0.9.19b 2015.06.15
- fix version number
- option "old_quattro=1" for old MAX S8 input numbering
  new is "VL VH HL HH", old is "VL HL VH HH"
- set drive strength in mxl5xx to 1 to fix problems with
  8th demod

0.9.19 2015.06.14
- lock flash access
- support serial numbers for newer cards

0.9.18 2015.05.05
- support GT links
- fixes for mxl5xx tuning
  (prevent simultaneous tuning inside 100ms)
- allow dynamic fmode change

0.9.18 (beta) 2015.01.24
- initial support of GT links
- fixes for mxl5xx tuning

0.9.17 2015.01.10
- support input modes for MAX S8 4/8
	ddbridge parameter fmode:
	fmode = 0  : demod 0 & 4 on input 0, demod 1 & 5 on input 1, etc.
	             input for each frontend can be changed with ioctl DTV_INPUT
	fmode = 1  : connect all lines to QUAD LNB
	fmode = 2  : connect to QUATTRO LNB: input 0=V,L, 1=H,L, 2=V,H, 3=H,H
	fmode = 3  : all demods on input 0
	             send JESS or SCR commands from application

- preparations for support of GT links

0.9.16 2014.12.19
- support MAX S8 4/8 production card

0.9.15a 2014.07.29
- last minute fixes

0.9.15 2014.06.24
- support MAX S8 4/8 prototype

0.9.14b 2014.04.24
- fix fe read lockup in cxd2843

0.9.14a 2014.04.23
- fix Cine S2 V7 PCIe ID

0.9.14 2014.04.20
- support for CineCT V7 with C2
- initial support for STV0910/STV6111/LNBH25
- more coding style cleanups
- API changes for modulator

0.9.13 2014.03.25
- support for CineCT V7

0.9.12 2014.02.17
- support for SNR in XO2 and LED connected to XO2

0.9.11 2014.02.04

- kernel style cleanups
- attr alloc fixes for modulator card

0.9.10 2013.10.09 

- Bugfixes CXD2843
  support slice id

0.9.9 2013.08.14

- support for CXD2843 DVB-C/T/C2/T2 demod

0.9.7 2013.04.15

- Octopus Net complete

- changes for 3.8 kernels


0.9.6 2012.09.26

- basic Octopus Net support


0.9.5 2012.08.05

- cleanup

0.9.4 2012.07.11

- support for new modulator bitstream 1.1

0.9.3 2012.06.13

- add hwid, remap attributes

0.9.2 2012.06.08

- fix cxd2099 address writing optmization

- add setting of TS output gap size through sysfs 
  gap_size = (gap_value*2)+4
  bit rate = 72 Mbps * 188 / gap_size

0.9.1 2012.05.01

- support for reworked DVB-C modulator

- support for multiple channels

- move some funktions from tasklets back into 
  interrupt in those cases where it is more efficient


0.9.0 2012.03.05

- initial support of DVB-C modulator card

- rework of redirect mechanism to support modulator


0.8.5 2012.01.30

- init DMA_BUFFER_CONTROL before starting input/output
  in case it was not stopped properly before reboot
  (can only happen on cards on PCIe extensions without reset line)


0.8.4 2012.01.04

- support for reading bridge serial number

- test code for proper start/stop of redirected streams


0.8.3 2011.12.18 

- add support for EEProms on 0x50

- make flashprog safer to use for end users

- lost of kernel coding style adjustments


0.8.2 2011.10.14 

- added some documentation in docs/

0.8.1 2011.10.13 

- signal strength and SNR for STV0367/TDA18212 combo

- serial number support via sysfs


0.8 2011.07.30

- Support for DVB-C/T cards with stv0367 demod and TDA18212 tuner 
 
- loopback TS for testing

- support of octopus cards with fan, led and temperature sensors
  via attributes.

- redirect of TS to CI and back


0.7 2011.06.14

- Add IDs for new cards in ddbridge driver

- Change dvb adapter allocation for ddbridge driver
  Configurable with module parameter adapter_alloc:
  
  0 = one adapter per io (old behavior)
  1 = one per tab with io present (tab connected to something)
  2 = one per tab regardless of something connected or not
  3 = one adapter for all devices of one card