1
0
mirror of https://github.com/DigitalDevices/dddvb.git synced 2023-10-10 13:37:43 +02:00
dddvb/ddbridge/ddbridge-regs.h
2023-08-01 22:27:55 +02:00

651 lines
24 KiB
C

/*
* ddbridge-regs.h: Digital Devices PCIe bridge driver
*
* Copyright (C) 2010-2017 Digital Devices GmbH
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 only, as published by the Free Software Foundation.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, point your browser to
* http://www.gnu.org/copyleft/gpl.html
*/
/* Register Definitions */
#define CUR_REGISTERMAP_VERSION 0x10004
#define CUR_REGISTERMAP_VERSION_0007 0x10002
#define CUR_REGISTERMAP_VERSION_0008 0x10002
#define CUR_REGISTERMAP_VERSION_CI 0x10000
#define CUR_REGISTERMAP_VERSION_CI_PRO 0x10000
#define HARDWARE_VERSION 0x0000
#define REGISTERMAP_VERSION 0x0004
#define DEVICE_ID 0x0008
#define BOARD_ID 0x000C
/* ------------------------------------------------------------------------- */
/* SPI Controller */
#define SPI_CONTROL 0x10
#define SPI_DATA 0x14
/* ------------------------------------------------------------------------- */
/* GPIO */
#define GPIO_OUTPUT 0x20
#define GPIO_INPUT 0x24
#define GPIO_DIRECTION 0x28
/* ------------------------------------------------------------------------- */
/* MDIO */
#define MDIO_CTRL_OFF 0x00
#define MDIO_ADR_OFF 0x04
#define MDIO_REG_OFF 0x08
#define MDIO_VAL_OFF 0x0C
/* ------------------------------------------------------------------------- */
#define BOARD_CONTROL 0x30
/* ------------------------------------------------------------------------- */
/* Interrupt controller
* How many MSI's are available depends on HW (Min 2 max 8)
* How many are usable also depends on Host platform
*/
#define INTERRUPT_BASE (0x40)
#define INTERRUPT_ENABLE (INTERRUPT_BASE + 0x00)
#define MSI0_ENABLE (INTERRUPT_BASE + 0x00)
#define MSI1_ENABLE (INTERRUPT_BASE + 0x04)
#define MSI2_ENABLE (INTERRUPT_BASE + 0x08)
#define MSI3_ENABLE (INTERRUPT_BASE + 0x0C)
#define MSI4_ENABLE (INTERRUPT_BASE + 0x10)
#define MSI5_ENABLE (INTERRUPT_BASE + 0x14)
#define MSI6_ENABLE (INTERRUPT_BASE + 0x18)
#define MSI7_ENABLE (INTERRUPT_BASE + 0x1C)
#define INTERRUPT_STATUS (INTERRUPT_BASE + 0x20)
#define INTERRUPT_ACK (INTERRUPT_BASE + 0x20)
#define INTERRUPT_ACK1 (INTERRUPT_BASE + 0x24)
#define INTERRUPT_ACK2 (INTERRUPT_BASE + 0x28)
#define INTMASK_CLOCKGEN (0x00000001)
#define INTMASK_TEMPMON (0x00000002)
#define INTMASK_I2C1 (0x00000001)
#define INTMASK_I2C2 (0x00000002)
#define INTMASK_I2C3 (0x00000004)
#define INTMASK_I2C4 (0x00000008)
#define INTMASK_CIRQ1 (0x00000010)
#define INTMASK_CIRQ2 (0x00000020)
#define INTMASK_CIRQ3 (0x00000040)
#define INTMASK_CIRQ4 (0x00000080)
#define INTMASK_TSINPUT1 (0x00000100)
#define INTMASK_TSINPUT2 (0x00000200)
#define INTMASK_TSINPUT3 (0x00000400)
#define INTMASK_TSINPUT4 (0x00000800)
#define INTMASK_TSINPUT5 (0x00001000)
#define INTMASK_TSINPUT6 (0x00002000)
#define INTMASK_TSINPUT7 (0x00004000)
#define INTMASK_TSINPUT8 (0x00008000)
#define INTMASK_TSOUTPUT1 (0x00010000)
#define INTMASK_TSOUTPUT2 (0x00020000)
#define INTMASK_TSOUTPUT3 (0x00040000)
#define INTMASK_TSOUTPUT4 (0x00080000)
#define INTERRUPT_V2_CONTROL (INTERRUPT_BASE + 0x00)
#define INTERRUPT_V2_ENABLE_1 (INTERRUPT_BASE + 0x04)
#define INTERRUPT_V2_ENABLE_2 (INTERRUPT_BASE + 0x08)
#define INTERRUPT_V2_ENABLE_3 (INTERRUPT_BASE + 0x0c)
#define INTERRUPT_V2_ENABLE_4 (INTERRUPT_BASE + 0x10)
#define INTERRUPT_V2_ENABLE_5 (INTERRUPT_BASE + 0x14)
#define INTERRUPT_V2_ENABLE_6 (INTERRUPT_BASE + 0x18)
#define INTERRUPT_V2_ENABLE_7 (INTERRUPT_BASE + 0x1c)
#define INTERRUPT_V2_STATUS (INTERRUPT_BASE + 0x20)
#define INTERRUPT_V2_STATUS_1 (INTERRUPT_BASE + 0x24)
#define INTERRUPT_V2_STATUS_2 (INTERRUPT_BASE + 0x28)
#define INTERRUPT_V2_STATUS_3 (INTERRUPT_BASE + 0x2c)
#define INTERRUPT_V2_STATUS_4 (INTERRUPT_BASE + 0x30)
#define INTERRUPT_V2_STATUS_5 (INTERRUPT_BASE + 0x34)
#define INTERRUPT_V2_STATUS_6 (INTERRUPT_BASE + 0x38)
#define INTERRUPT_V2_STATUS_7 (INTERRUPT_BASE + 0x3c)
/* Modulator registers */
/* Clock Generator ( Sil598 @ 0xAA I2c ) */
#define CLOCKGEN_BASE (0x80)
#define CLOCKGEN_CONTROL (CLOCKGEN_BASE + 0x00)
#define CLOCKGEN_INDEX (CLOCKGEN_BASE + 0x04)
#define CLOCKGEN_WRITEDATA (CLOCKGEN_BASE + 0x08)
#define CLOCKGEN_READDATA (CLOCKGEN_BASE + 0x0C)
/* DAC ( AD9781/AD9783 SPI ) */
#define DAC_BASE (0x090)
#define DAC_CONTROL (DAC_BASE)
#define DAC_WRITE_DATA (DAC_BASE + 4)
#define DAC_READ_DATA (DAC_BASE + 8)
#define DAC_CONTROL_INSTRUCTION_REG (0xFF)
#define DAC_CONTROL_STARTIO (0x100)
#define DAC_CONTROL_RESET (0x200)
/* Temperature Monitor ( 2x LM75A @ 0x90,0x92 I2c ) */
#define TEMPMON_BASE (0x1c0)
#define TEMPMON_CONTROL (TEMPMON_BASE + 0x00)
#define TEMPMON_CONTROL_SCAN (0x00000001)
#define TEMPMON_CONTROL_AUTOSCAN (0x00000002)
#define TEMPMON_CONTROL_INTENABLE (0x00000004)
#define TEMPMON_CONTROL_CLEAR (0x00000008)
#define TEMPMON_CONTROL_OVERTEMP (0x00008000)
#define TEMPMON_STATUS_SHUTDOWN (0x00008000)
/* Temperature in C x 256 */
#define TEMPMON_CORE (TEMPMON_BASE + 0x04)
#define TEMPMON_SENSOR0 (TEMPMON_BASE + 0x04)
#define TEMPMON_SENSOR1 (TEMPMON_BASE + 0x08)
#define TEMPMON_SENSOR2 (TEMPMON_BASE + 0x0C)
#define TEMPMON_FANCONTROL (TEMPMON_BASE + 0x10)
#define TEMPMON_FANPWM (0x00000F00) /* PWM speed in 10% steps */
#define TEMPMON_FANTACHO (0x000000FF) /* Rotations in 100/min steps */
#define TEMPMON_INTERRUPT_V1 (24)
#define TEMPMON_INTERRUPT_V1_MASK (1<<24)
/* V1 Temperature Monitor
* Temperature Monitor TEMPMON_CONTROL & 0x8000 == 0 : ( 2x LM75A @ 0x90,0x92 )
* Temperature Monitor TEMPMON_CONTROL & 0x8000 == 1 :
* ( 1x LM75A @ 0x90, 1x ADM1032 @ 0x9A )
*/
/* Temperature in C x 256 (ADM1032 ext) */
#define TEMPMON1_CORE (TEMPMON_SENSOR0)
/* Temperature in C x 256 (LM75A 0x90) */
#define TEMPMON1_SENSOR1 (TEMPMON_BASE + 0x08)
/* Temperature in C x 256 (LM75A 0x92 or ADM1032 Int) */
#define TEMPMON1_SENSOR2 (TEMPMON_BASE + 0x0C)
/* V2 Temperature Monitor 2 ADM1032 */
/* Temperature in C x 256 (ADM1032 int) */
#define TEMPMON2_BOARD (TEMPMON_SENSOR0)
/* Temperature in C x 256 (ADM1032 ext) */
#define TEMPMON2_FPGACORE (TEMPMON_SENSOR1)
/* Temperature in C x 256 (ADM1032 ext) */
#define TEMPMON2_QAMCORE (TEMPMON_SENSOR2)
/* SHORT Temperature in C x 256 (ADM1032 ext) */
#define TEMPMON2_DACCORE (TEMPMON_SENSOR2)
/* ------------------------------------------------------------------------- */
/* I2C Master Controller */
#define I2C_COMMAND (0x00)
#define I2C_TIMING (0x04)
#define I2C_TASKLENGTH (0x08) /* High read, low write */
#define I2C_TASKADDRESS (0x0C) /* High read, low write */
#define I2C_MONITOR (0x1C)
#define I2C_SPEED_666 (0x02010202)
#define I2C_SPEED_400 (0x04030404)
#define I2C_SPEED_200 (0x09080909)
#define I2C_SPEED_154 (0x0C0B0C0C)
#define I2C_SPEED_100 (0x13121313)
#define I2C_SPEED_77 (0x19181919)
#define I2C_SPEED_50 (0x27262727)
/* ------------------------------------------------------------------------- */
/* DMA Controller */
#define DMA_BASE_WRITE (0x100)
#define DMA_BASE_READ (0x140)
#define DMA_CONTROL (0x00)
#define DMA_ERROR (0x04)
#define DMA_DIAG_CONTROL (0x1C)
#define DMA_DIAG_PACKETCOUNTER_LOW (0x20)
#define DMA_DIAG_PACKETCOUNTER_HIGH (0x24)
#define DMA_DIAG_TIMECOUNTER_LOW (0x28)
#define DMA_DIAG_TIMECOUNTER_HIGH (0x2C)
#define DMA_DIAG_RECHECKCOUNTER (0x30)
#define DMA_DIAG_WAITTIMEOUTINIT (0x34)
#define DMA_DIAG_WAITOVERFLOWCOUNTER (0x38)
#define DMA_DIAG_WAITCOUNTER (0x3C)
#define TS_CONTROL(_io) ((_io)->regs + 0x00)
#define TS_CONTROL2(_io) ((_io)->regs + 0x04)
#define TS_STAT(_io) ((_io)->regs + 0x08)
#define TS_INPUT_CONTROL_ENABLE (0x00000001)
#define TS_INPUT_CONTROL_RESET (0x00000002)
#define TS_INPUT_CONTROL_SKIPERROR (0x00000008)
/* ------------------------------------------------------------------------- */
/* DMA Buffer */
#define DMA_BUFFER_CONTROL(_dma) ((_dma)->regs + 0x00)
#define DMA_BUFFER_ACK(_dma) ((_dma)->regs + 0x04)
#define DMA_BUFFER_CURRENT(_dma) ((_dma)->regs + 0x08)
#define DMA_BUFFER_SIZE(_dma) ((_dma)->regs + 0x0c)
/* ------------------------------------------------------------------------- */
#define LNB_CONTROL(i) ((i) * 0x20 + 0x00)
#define LNB_CMD (7ULL << 0)
#define LNB_CMD_NOP 0
#define LNB_CMD_INIT 1
#define LNB_CMD_STATUS 2
#define LNB_CMD_LOW 3
#define LNB_CMD_HIGH 4
#define LNB_CMD_OFF 5
#define LNB_CMD_DISEQC 6
#define LNB_CMD_SCIF 7
#define LNB_BUSY (1ULL << 4)
#define LNB_TONE (1ULL << 15)
#define LNB_INTERRUPT_BASE 4
#define LNB_STATUS(i) ((i) * 0x20 + 0x04)
#define LNB_VOLTAGE(i) ((i) * 0x20 + 0x08)
#define LNB_CONFIG(i) ((i) * 0x20 + 0x0c)
#define LNB_BUF_LEVEL(i) ((i) * 0x20 + 0x10)
#define LNB_BUF_WRITE(i) ((i) * 0x20 + 0x14)
#define LNB_SETTING(i) ((i) * 0x20 + 0x0c)
#define LNB_FIFO_LEVEL(i) ((i) * 0x20 + 0x10)
#define LNB_RESET_FIFO(i) ((i) * 0x20 + 0x10)
#define LNB_WRITE_FIFO(i) ((i) * 0x20 + 0x14)
/* ------------------------------------------------------------------------- */
/* CI Interface (only CI-Bridge) */
#define CI_CONTROL(_ci) ((_ci)->regs + 0x00)
#define CI_DO_ATTRIBUTE_RW(_ci) ((_ci)->regs + 0x04)
#define CI_DO_IO_RW(_ci) ((_ci)->regs + 0x08)
#define CI_READDATA(_ci) ((_ci)->regs + 0x0c)
#define CI_DO_READ_ATTRIBUTES(_ci) ((_ci)->regs + 0x10)
#define CI_RESET_CAM (0x00000001)
#define CI_POWER_ON (0x00000002)
#define CI_ENABLE (0x00000004)
#define CI_BLOCKIO_ENABLE (0x00000008)
#define CI_BYPASS_DISABLE (0x00000010)
#define CI_DISABLE_AUTO_OFF (0x00000020)
#define CI_CAM_READY (0x00010000)
#define CI_CAM_DETECT (0x00020000)
#define CI_READY (0x80000000)
#define CI_BLOCKIO_ACTIVE (0x40000000)
#define CI_BLOCKIO_RCVDATA (0x20000000)
#define CI_BLOCKIO_SEND_PENDING (0x10000000)
#define CI_BLOCKIO_SEND_COMPLETE (0x08000000)
#define CI_READ_CMD (0x40000000)
#define CI_WRITE_CMD (0x80000000)
#define CI_BLOCKIO_SEND(_ci) ((_ci)->regs + 0x14)
#define CI_BLOCKIO_RECEIVE(_ci) ((_ci)->regs + 0x18)
#define CI_BLOCKIO_SEND_COMMAND (0x80000000)
#define CI_BLOCKIO_SEND_COMPLETE_ACK (0x40000000)
#define CI_BLOCKIO_RCVDATA_ACK (0x40000000)
#define CI_BUFFER_BASE (0x3000)
#define CI_BUFFER_SIZE (0x0800)
#define CI_BLOCKIO_BUFFER_SIZE (CI_BUFFER_SIZE / 2)
#define CI_BUFFER(i) (CI_BUFFER_BASE + (i) * CI_BUFFER_SIZE)
#define CI_BLOCKIO_RECEIVE_BUFFER(i) (CI_BUFFER_BASE + (i) * CI_BUFFER_SIZE)
#define CI_BLOCKIO_SEND_BUFFER(i) \
(CI_BUFFER_BASE + (i) * CI_BUFFER_SIZE + CI_BLOCKIO_BUFFER_SIZE)
/* V1 */
#define VCO1_BASE (0xC0)
#define VCO1_CONTROL (VCO1_BASE + 0x00)
#define VCO1_DATA (VCO1_BASE + 0x04) /* 24 Bit */
/* 1 = Trigger write, resets when done */
#define VCO1_CONTROL_WRITE (0x00000001)
/* 0 = Put VCO into power down */
#define VCO1_CONTROL_CE (0x00000002)
/* Muxout from VCO (usually = Lock) */
#define VCO1_CONTROL_MUXOUT (0x00000004)
#define VCO2_BASE (0xC8)
#define VCO2_CONTROL (VCO2_BASE + 0x00)
#define VCO2_DATA (VCO2_BASE + 0x04) /* 24 Bit */
/* 1 = Trigger write, resets when done */
#define VCO2_CONTROL_WRITE (0x00000001)
/* 0 = Put VCO into power down */
#define VCO2_CONTROL_CE (0x00000002)
/* Muxout from VCO (usually = Lock) */
#define VCO2_CONTROL_MUXOUT (0x00000004)
#define VCO3_BASE (0xD0)
#define VCO3_CONTROL (VCO3_BASE + 0x00)
#define VCO3_DATA (VCO3_BASE + 0x04) /* 32 Bit */
/* 1 = Trigger write, resets when done */
#define VCO3_CONTROL_WRITE (0x00000001)
/* 0 = Put VCO into power down */
#define VCO3_CONTROL_CE (0x00000002)
/* Muxout from VCO (usually = Lock) */
#define VCO3_CONTROL_MUXOUT (0x00000004)
/* V2 */
#define MAX2871_BASE (0xC0)
#define MAX2871_CONTROL (MAX2871_BASE + 0x00)
#define MAX2871_OUTDATA (MAX2871_BASE + 0x04)
#define MAX2871_INDATA (MAX2871_BASE + 0x08)
/* 1 = Trigger write, resets when done */
#define MAX2871_CONTROL_WRITE (0x00000001)
/* 0 = Put VCO into power down */
#define MAX2871_CONTROL_CE (0x00000002)
/* Muxout from VCO */
#define MAX2871_CONTROL_MUXOUT (0x00000004)
/* Lock from VCO */
#define MAX2871_CONTROL_LOCK (0x00000008)
/* Signal the loss of lock event (currently only an interrupt) */
#define MAX2871_CONTROL_ENABLE_LOSTLOCK_EVENT (0x00000010)
/* Loss of Lock, needs to be cleared by writing a 1
* during initial setup this bit can be set.
*/
#define MAX2871_CONTROL_LOSTLOCK (0x00008000)
#define FSM_BASE (0x200)
#define FSM_CONTROL (FSM_BASE + 0x00)
#define FSM_CONTROL_ENABLE (0x00000100)
#define FSM_CMD_MASK (0x00000087)
#define FSM_CMD_STATUS (0x00000080)
#define FSM_CMD_RESET (0x00000080)
#define FSM_CMD_POWERDOWN (0x00000081)
#define FSM_CMD_SETUP (0x00000082)
#define FSM_STATUS (FSM_BASE + 0x00)
#define FSM_STATUS_READY (0x00010000)
#define FSM_STATUS_QAMREADY (0x00020000)
#define FSM_CAPACITY (FSM_BASE + 0x04)
#define FSM_CAPACITY_MAX (0x3F000000)
#define FSM_CAPACITY_CUR (0x003F0000)
#define FSM_CAPACITY_INUSE (0x0000003F)
#define FSM_GAIN (FSM_BASE + 0x10)
#define FSM_GAINMASK (0x000000FF)
#define FSM_GAIN_N1 (0x000000FE)
#define FSM_GAIN_N2 (0x000000A1)
#define FSM_GAIN_N4 (0x00000066)
#define FSM_GAIN_N8 (0x00000048)
#define FSM_GAIN_N16 (0x0000002D)
#define FSM_GAIN_N24 (0x00000029)
#define FSM_GAIN_N96 (0x00000011)
/* Attenuator/VGA */
#define RF_ATTENUATOR (0xD8)
/* 0x00 = 0 dB
* 0x01 = 1 dB
* ...
* 0x1F = 31 dB
*/
#define RF_VGA (0xDC)
/* Only V2 */
/* 8 bit range 0 - 31.75 dB Gain */
/* VGA Gain for same output level as V1 Modulator */
#define RF_VGA_GAIN_N8 (85)
#define RF_VGA_GAIN_N16 (117)
#define RF_VGA_GAIN_N24 (122)
#define RF_VGA_GAIN_MAX (200)
/* V1 only */
#define RF_POWER (0xE0)
#define RF_POWER_BASE (0xE0)
#define RF_POWER_CONTROL (RF_POWER_BASE + 0x00)
#define RF_POWER_DATA (RF_POWER_BASE + 0x04)
#define RF_POWER_CONTROL_START (0x00000001)
#define RF_POWER_CONTROL_DONE (0x00000002)
#define RF_POWER_CONTROL_VALIDMASK (0x00000700)
#define RF_POWER_CONTROL_VALID (0x00000500)
/*
* Output control
*/
#define IQOUTPUT_BASE (0x240)
#define IQOUTPUT_CONTROL (IQOUTPUT_BASE + 0x00)
#define IQOUTPUT_CONTROL2 (IQOUTPUT_BASE + 0x04)
#define IQOUTPUT_PEAK_DETECTOR (IQOUTPUT_BASE + 0x08)
#define IQOUTPUT_POSTSCALER (IQOUTPUT_BASE + 0x0C)
#define IQOUTPUT_PRESCALER (IQOUTPUT_BASE + 0x10)
#define IQOUTPUT_EQUALIZER_0 (IQOUTPUT_BASE + 0x14)
#define IQOUTPUT_EQUALIZER_1 (IQOUTPUT_BASE + 0x18)
#define IQOUTPUT_EQUALIZER_2 (IQOUTPUT_BASE + 0x1C)
#define IQOUTPUT_EQUALIZER_3 (IQOUTPUT_BASE + 0x20)
#define IQOUTPUT_EQUALIZER_4 (IQOUTPUT_BASE + 0x24)
#define IQOUTPUT_EQUALIZER_5 (IQOUTPUT_BASE + 0x28)
#define IQOUTPUT_EQUALIZER_6 (IQOUTPUT_BASE + 0x2C)
#define IQOUTPUT_EQUALIZER_7 (IQOUTPUT_BASE + 0x30)
#define IQOUTPUT_EQUALIZER_8 (IQOUTPUT_BASE + 0x34)
#define IQOUTPUT_EQUALIZER_9 (IQOUTPUT_BASE + 0x38)
#define IQOUTPUT_EQUALIZER_10 (IQOUTPUT_BASE + 0x3C)
#define IQOUTPUT_EQUALIZER(i) (IQOUTPUT_EQUALIZER_0 + (i) * 4)
#define IQOUTPUT_CONTROL_RESET (0x00000001)
#define IQOUTPUT_CONTROL_ENABLE (0x00000002)
#define IQOUTPUT_CONTROL_RESET_PEAK (0x00000004)
#define IQOUTPUT_CONTROL_ENABLE_PEAK (0x00000008)
#define IQOUTPUT_CONTROL_BYPASS_EQUALIZER (0x00000010)
/* Modulator Base V1 */
#define MODULATOR_BASE (0x200)
#define MODULATOR_CONTROL (MODULATOR_BASE)
#define MODULATOR_IQTABLE_END (MODULATOR_BASE + 4)
#define MODULATOR_IQTABLE_INDEX (MODULATOR_BASE + 8)
#define MODULATOR_IQTABLE_DATA (MODULATOR_BASE + 12)
#define MODULATOR_IQTABLE_INDEX_CHANNEL_MASK (0x000F0000)
#define MODULATOR_IQTABLE_INDEX_IQ_MASK (0x00008000)
#define MODULATOR_IQTABLE_INDEX_ADDRESS_MASK (0x000007FF)
#define MODULATOR_IQTABLE_INDEX_SEL_I (0x00000000)
#define MODULATOR_IQTABLE_INDEX_SEL_Q (MODULATOR_IQTABLE_INDEX_IQ_MASK)
#define MODULATOR_IQTABLE_SIZE (2048)
/* Modulator Channels */
#define CHANNEL_BASE dev->link[0].info->regmap->channel->base
#define CHANNEL_CONTROL(i) (CHANNEL_BASE + (i) * 64 + 0x00)
#define CHANNEL_SETTINGS(i) (CHANNEL_BASE + (i) * 64 + 0x04)
#define CHANNEL_SETTINGS2(i) (CHANNEL_BASE + (i) * 64 + 0x08)
#define CHANNEL_RATE_INCR(i) (CHANNEL_BASE + (i) * 64 + 0x0C)
#define CHANNEL_PCR_ADJUST_OUTL(i) (CHANNEL_BASE + (i) * 64 + 0x10)
#define CHANNEL_PCR_ADJUST_OUTH(i) (CHANNEL_BASE + (i) * 64 + 0x14)
#define CHANNEL_PCR_ADJUST_INL(i) (CHANNEL_BASE + (i) * 64 + 0x18)
#define CHANNEL_PCR_ADJUST_INH(i) (CHANNEL_BASE + (i) * 64 + 0x1C)
#define CHANNEL_PCR_ADJUST_ACCUL(i) (CHANNEL_BASE + (i) * 64 + 0x20)
#define CHANNEL_PCR_ADJUST_ACCUH(i) (CHANNEL_BASE + (i) * 64 + 0x24)
#define CHANNEL_PKT_COUNT_OUT(i) (CHANNEL_BASE + (i) * 64 + 0x28)
#define CHANNEL_PKT_COUNT_IN(i) (CHANNEL_BASE + (i) * 64 + 0x2C)
#define CHANNEL_KF(i) (CHANNEL_BASE + (i) * 64 + 0x30)
#define CHANNEL_LF(i) (CHANNEL_BASE + (i) * 64 + 0x34)
#define CHANNEL_CONTROL_RESET (0x00000001)
#define CHANNEL_CONTROL_ENABLE_DVB (0x00000002)
#define CHANNEL_CONTROL_ENABLE_IQ (0x00000004)
#define CHANNEL_CONTROL_ENABLE_SOURCE (0x00000008)
#define CHANNEL_CONTROL_ENABLE_PCRADJUST (0x00000010)
#define CHANNEL_CONTROL_FREEZE_STATUS (0x00000100)
#define CHANNEL_CONTROL_CMD_MASK (0x0000F000)
#define CHANNEL_CONTROL_CMD_STATUS (0x00008000)
#define CHANNEL_CONTROL_CMD_FREE (0x00008000)
#define CHANNEL_CONTROL_CMD_SETUP (0x00009000)
#define CHANNEL_CONTROL_CMD_MUTE (0x0000A000)
#define CHANNEL_CONTROL_CMD_UNMUTE (0x0000B000)
#define CHANNEL_CONTROL_RESET_ERROR (0x00010000)
#define CHANNEL_CONTROL_ACTIVE (0x00400000)
#define CHANNEL_CONTROL_BUSY (0x00800000)
#define CHANNEL_CONTROL_ERROR_CMD (0x10000000)
#define CHANNEL_CONTROL_ERROR_SYNC (0x20000000)
#define CHANNEL_CONTROL_ERROR_UNDERRUN (0x40000000)
#define CHANNEL_CONTROL_ERROR_FATAL (0x80000000)
#define CHANNEL_SETTINGS_QAM_MASK (0x00000007)
#define CHANNEL_SETTINGS_QAM16 (0x00000000)
#define CHANNEL_SETTINGS_QAM32 (0x00000001)
#define CHANNEL_SETTINGS_QAM64 (0x00000002)
#define CHANNEL_SETTINGS_QAM128 (0x00000003)
#define CHANNEL_SETTINGS_QAM256 (0x00000004)
#define CHANNEL_SETTINGS2_OUTPUT_MASK (0x0000007F)
#define KFLF_MAX (0x07FFFFFFUL)
#define KF_INIT(_symbol_rate) (_symbol_rate)
#define LF_INIT(_symbol_rate) (9000000UL)
#define MIN_SYMBOLRATE (1000000)
#define MAX_SYMBOLRATE (7100000)
/* OCTONET */
#define ETHER_BASE (0x100)
#define ETHER_CONTROL (ETHER_BASE + 0x00)
#define ETHER_LENGTH (ETHER_BASE + 0x04)
#define RTP_MASTER_BASE (0x120)
#define RTP_MASTER_CONTROL (RTP_MASTER_BASE + 0x00)
#define RTP_RTCP_INTERRUPT (RTP_MASTER_BASE + 0x04)
#define RTP_MASTER_RTCP_SETTINGS (RTP_MASTER_BASE + 0x0c)
#define STREAM_BASE (0x400)
#define STREAM_CONTROL(i) (STREAM_BASE + (i) * 0x20 + 0x00)
#define STREAM_RTP_PACKET(i) (STREAM_BASE + (i) * 0x20 + 0x04)
#define STREAM_RTCP_PACKET(i) (STREAM_BASE + (i) * 0x20 + 0x08)
#define STREAM_RTP_SETTINGS(i) (STREAM_BASE + (i) * 0x20 + 0x0c)
#define STREAM_INSERT_PACKET(i) (STREAM_BASE + (i) * 0x20 + 0x10)
#define STREAM_PACKET_OFF(i) ((i) * 0x200)
#define STREAM_PACKET_ADR(i) (0x2000 + (STREAM_PACKET_OFF(i)))
#define STREAM_PIDS(i) (0x4000 + (i) * 0x400)
#define TS_CAPTURE_BASE (0x0140)
#define TS_CAPTURE_CONTROL (TS_CAPTURE_BASE + 0x00)
#define TS_CAPTURE_PID (TS_CAPTURE_BASE + 0x04)
#define TS_CAPTURE_RECEIVED (TS_CAPTURE_BASE + 0x08)
#define TS_CAPTURE_TIMEOUT (TS_CAPTURE_BASE + 0x0c)
#define TS_CAPTURE_TABLESECTION (TS_CAPTURE_BASE + 0x10)
#define TS_CAPTURE_MEMORY (0x7000)
#define PID_FILTER_BASE (0x800)
#define PID_FILTER_SYSTEM_PIDS(i) (PID_FILTER_BASE + (i) * 0x20)
#define PID_FILTER_PID(i, j) (PID_FILTER_BASE + (i) * 0x20 + (j) * 4)
/* V2 */
/* MAX2871 same as DVB Modulator V2 */
#define RFDAC_BASE (0x200)
#define RFDAC_CONTROL (RFDAC_BASE + 0x00)
#define RFDAC_CMD_MASK (0x00000087)
#define RFDAC_CMD_STATUS (0x00000080)
#define RFDAC_CMD_RESET (0x00000080)
#define RFDAC_CMD_POWERDOWN (0x00000081)
#define RFDAC_CMD_SETUP (0x00000082)
#define RFDAC_STATUS (RFDAC_BASE + 0x00)
#define RFDAC_STATUS_READY (0x00010000)
#define RFDAC_STATUS_DACREADY (0x00020000)
#define RFDAC_FCW (RFDAC_BASE + 0x10)
#define JESD204B_BASE (0x280)
/* Additional Status Bits */
#define DMA_PCIE_LANES_MASK (0x00070000)
/* Modulator Channels, partially compatible to DVB Modulator V1 */
#define SDR_CHANNEL_BASE (0x800)
#define SDR_CHANNEL_CONTROL(i) ((SDR_CHANNEL_BASE) + (i) * 64 + 0x00)
#define SDR_CHANNEL_CONFIG(i) ((SDR_CHANNEL_BASE) + (i) * 64 + 0x04)
#define SDR_CHANNEL_CFCW(i) ((SDR_CHANNEL_BASE) + (i) * 64 + 0x08)
#define SDR_CHANNEL_ARICW(i) ((SDR_CHANNEL_BASE) + (i) * 64 + 0x0C)
#define SDR_CHANNEL_RGAIN(i) ((SDR_CHANNEL_BASE) + (i) * 64 + 0x10)
#define SDR_CHANNEL_SETFIR(i) ((SDR_CHANNEL_BASE) + (i) * 64 + 0x14)
#define SDR_CHANNEL_FMDCW(i) ((SDR_CHANNEL_BASE) + (i) * 64 + 0x20)
#define SDR_CHANNEL_FM1FCW(i) ((SDR_CHANNEL_BASE) + (i) * 64 + 0x24)
#define SDR_CHANNEL_FM2FCW(i) ((SDR_CHANNEL_BASE) + (i) * 64 + 0x28)
#define SDR_CHANNEL_FM1GAIN(i) ((SDR_CHANNEL_BASE) + (i) * 64 + 0x2C)
#define SDR_CHANNEL_FM2GAIN(i) ((SDR_CHANNEL_BASE) + (i) * 64 + 0x30)
/* Control and status bits */
#define SDR_CONTROL_ENABLE_CHANNEL (0x00000004)
#define SDR_CONTROL_ENABLE_DMA (0x00000008)
#define SDR_STATUS_DMA_UNDERRUN (0x00010000)
/* Config */
#define SDR_CONFIG_ENABLE_FM1 (0x00000002)
#define SDR_CONFIG_ENABLE_FM2 (0x00000004)
#define SDR_CONFIG_DISABLE_ARI (0x00000010)
#define SDR_CONFIG_DISABLE_VSB (0x00000020)
/* SET FIR */
#define SDR_FIR_COEFF_MASK (0x00000FFF)
#define SDR_FIR_TAP_MASK (0x001F0000)
#define SDR_FIR_SELECT_MASK (0x00C00000)
#define SDR_VSB_LENGTH_MASK (0x01000000)
#define SDR_SET_FIR(select, tap, coeff, vsblen) \
((((select) << 22) & SDR_FIR_SELECT_MASK) | \
(((tap) << 16) & SDR_FIR_TAP_MASK) | \
((coeff) & SDR_FIR_COEFF_MASK) | \
(((vsblen) << 24) & SDR_VSB_LENGTH_MASK) | \
0 \
)
/* SDR_CONTROL */
#define SDR_CONTROL (0xd0)
#define SDR_GAIN_SMA (0xd4)
#define SDR_ATTENUATER (0xd8)
#define SDR_GAIN_F (0xdc)