frodovdr
/
dddvb
mirror of https://github.com/DigitalDevices/dddvb.git
1
0
Fork 0
Code Issues Releases Wiki Activity
dddvb/ddbridge/ddbridge-mci.h

806 lines
25 KiB
C
Raw Blame History

/*
* ddbridge-mci.h: Digital Devices micro code interface
*
* Copyright (C) 2017-2018 Digital Devices GmbH
* Marcus Metzler <mocm@metzlerbros.de>
* Ralph Metzler <rjkm@metzlerbros.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 only, as published by the Free Software Foundation.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, point your browser to
* http://www.gnu.org/copyleft/gpl.html
*/
#ifndef _DDBRIDGE_MCI_H_
#define _DDBRIDGE_MCI_H_
#define SX8_TSINPUT (0x280)
#define MIC_CONTROL (0x500)
#define MIC_PROGMEM_OLD (0x4000)
#define MIC_PROGMEM_OLD_SIZE (0x4000)
#define MIC_PROGMEM (0x8000)
#define MIC_PROGMEM_SIZE (0x8000)
#define MIC_DATAMEM (0x8000)
#define MIC_DATAMEM_SIZE (0x2000)
#define MIC_INTERFACE_IN (0x0600)
#define MIC_INTERFACE_OUT (0x0680)
#define MIC_INTERFACE_VER (0x06F0)
#define MCI_COMMAND_SIZE (0x80)
#define MCI_RESULT_SIZE (0x80)
#define MCI_CONTROL_START_COMMAND (0x00000001)
#define MCI_CONTROL_ENABLE_DONE_INTERRUPT (0x00000002)
#define MCI_CONTROL_RESET (0x00008000)
#define MCI_CONTROL_READY (0x00010000)
#define SX8_TSCONFIG (0x280)
#define SX8_TSCONFIG_MODE_MASK (0x00000003)
#define SX8_TSCONFIG_MODE_OFF (0x00000000)
#define SX8_TSCONFIG_MODE_NORMAL (0x00000001)
#define SX8_TSCONFIG_MODE_IQ (0x00000003)
/*
* IQMode only vailable on MaxSX8 on a single tuner
*
* IQ_MODE_SAMPLES
* sampling rate is 1550/24 MHz (64.583 MHz)
* channel agc is frozen, to allow stitching the FFT results together
*
* IQ_MODE_VTM
* sampling rate is the supplied symbolrate
* channel agc is active
*
* in both cases down sampling is done with a RRC Filter (currently fixed to alpha = 0.05)
* which causes some (ca 5%) aliasing at the edges from outside the spectrum
*/
#define SX8_TSCONFIG_TSHEADER (0x00000004)
#define SX8_TSCONFIG_BURST (0x00000008)
#define SX8_TSCONFIG_BURSTSIZE_MASK (0x00000030)
#define SX8_TSCONFIG_BURSTSIZE_2K (0x00000000)
#define SX8_TSCONFIG_BURSTSIZE_4K (0x00000010)
#define SX8_TSCONFIG_BURSTSIZE_8K (0x00000020)
#define SX8_TSCONFIG_BURSTSIZE_16K (0x00000030)
/* additional TS input control bits on MaxSX8 DD01:0009 */
#define TS_INPUT_CONTROL_SIZEMASK (0x00000030)
#define TS_INPUT_CONTROL_SIZE188 (0x00000000)
#define TS_INPUT_CONTROL_SIZE192 (0x00000010)
#define TS_INPUT_CONTROL_SIZE196 (0x00000020)
/********************************************************/
#define MCI_DEMOD_STOPPED (0)
#define MCI_DEMOD_WAIT_SIGNAL (2)
#define MCI_DEMOD_TIMEOUT (14)
#define MCI_DEMOD_LOCKED (15)
#define SX8_DEMOD_IQ_MODE (1)
#define SX8_DEMOD_WAIT_MATYPE (3)
#define M4_DEMOD_WAIT_TS (6)
#define M4_DEMOD_C2SCAN (16)
#define MCI_STATUS_OK (0x00)
#define MCI_STATUS_UNSUPPORTED (0x80)
#define MCI_STATUS_INVALID_PARAMETER (0xFC)
#define MCI_STATUS_RETRY (0xFD)
#define MCI_STATUS_NOT_READY (0xFE)
#define MCI_STATUS_ERROR (0xFF)
#define MCI_CMD_STOP (0x01)
#define MCI_CMD_GETSTATUS (0x02)
#define MCI_CMD_GETSIGNALINFO (0x03)
//#define MCI_CMD_RFPOWER (0x04)
#define MCI_CMD_SEARCH_DVBS (0x10)
#define MCI_CMD_SEARCH_ISDBS (0x11)
#define MCI_CMD_SEARCH_DVBC (0x20)
#define MCI_CMD_SEARCH_DVBT (0x21)
#define MCI_CMD_SEARCH_DVBT2 (0x22)
#define MCI_CMD_SEARCH_DVBC2 (0x23)
#define MCI_CMD_SEARCH_ISDBT (0x24)
#define MCI_CMD_SEARCH_ISDBC (0x25)
#define MCI_CMD_SEARCH_J83B (0x26)
#define MCI_CMD_GET_IQSYMBOL (0x30)
#define MCI_BANDWIDTH_UNKNOWN (0)
#define MCI_BANDWIDTH_1_7MHZ (1)
#define MCI_BANDWIDTH_5MHZ (5)
#define MCI_BANDWIDTH_6MHZ (6)
#define MCI_BANDWIDTH_7MHZ (7)
#define MCI_BANDWIDTH_8MHZ (8)
#define SX8_CMD_INPUT_ENABLE (0x40)
#define SX8_CMD_INPUT_DISABLE (0x41)
#define SX8_CMD_START_IQ (0x42)
#define SX8_CMD_STOP_IQ (0x43)
#define SX8_CMD_ENABLE_IQOUTPUT (0x44)
#define SX8_CMD_DISABLE_IQOUTPUT (0x45)
#define M4_CMD_GET_L1INFO (0x50)
#define M4_CMD_GET_IDS (0x51)
#define M4_CMD_GET_DVBT_TPS (0x52)
#define MCI_CMD_GET_BBHEADER (0x53)
#define M4_CMD_GET_ISDBT_TMCC (0x54)
#define M4_CMD_GET_ISDBS_TMCC (0x55)
#define M4_CMD_GET_ISDBC_TSMF (0x56)
#define M4_CMD_GET_BBHEADER (MCI_CMD_GET_BBHEADER)
#define M4_L1INFO_SEL_PRE (0)
#define M4_L1INFO_SEL_DSINFO (1)
#define M4_L1INFO_SEL_PLPINFO (2)
#define M4_L1INFO_SEL_PLPINFO_C (3)
#define M4_L1INFO_SEL_SETID (0x80)
#define MCI_BANDWIDTH_EXTENSION (0x80) // currently used only for J83B in Japan
#define M4_MODE_DVBSX (2)
#define M4_MODE_DVBC (3)
#define M4_MODE_DVBT (4)
#define M4_MODE_DVBT2 (5)
#define M4_MODE_DVBC2 (6)
#define M4_MODE_J83B (7)
#define M4_MODE_ISDBT (8)
#define M4_MODE_ISDBC (9)
#define M4_MODE_ISDBS (10)
#define M4_DVBC_CONSTELLATION_16QAM (0)
#define M4_DVBC_CONSTELLATION_32QAM (1)
#define M4_DVBC_CONSTELLATION_64QAM (2) // also valid for J83B and ISDB-C
#define M4_DVBC_CONSTELLATION_128QAM (3)
#define M4_DVBC_CONSTELLATION_256QAM (4) // also valid for J83B and ISDB-C
#define M4_SIGNALINFO_FLAG_CHANGE (0x01)
#define M4_SIGNALINFO_FLAG_EWS (0x02)
#define SX8_ROLLOFF_35 0
#define SX8_ROLLOFF_25 1
#define SX8_ROLLOFF_20 2
#define SX8_ROLLOFF_15 5
#define SX8_ROLLOFF_10 3
#define SX8_ROLLOFF_05 4
#define MCI_SUCCESS(status) ((status & MCI_STATUS_UNSUPPORTED) == 0)
/********************************************************/
struct mci_command {
union {
u32 command_word;
struct {
u8 command;
u8 tuner;
u8 demod;
u8 output;
};
};
union {
u32 params[31];
struct {
u8 flags; /* Bit 0: DVB-S Enabled, 1: DVB-S2 Enabled,
5: ChannelBonding, 6: FrequencyRange, 7: InputStreamID */
u8 s2_modulation_mask; /* Bit 0 : QPSK, 1: 8PSK/8APSK,
2 : 16APSK, 3: 32APSK, 4: 64APSK,
5: 128APSK, 6: 256APSK */
u8 rsvd1;
u8 retry;
u32 frequency;
u32 symbol_rate;
u8 input_stream_id;
u8 rsvd2[3];
u32 scrambling_sequence_index;
u32 frequency_range;
u8 channel_bonding_config; /* Bit 7: IsSlave, Bit 5..4: MasterDemod,
bit 0: Num channels - 2.
(must be set on all channels to same value) */
} dvbs2_search;
struct {
u8 flags; /* Bit 0: 0 = TSID is Transport Stream ID, 1 = TSID is relative stream number */
u8 rsvd1[2];
u8 retry;
u32 frequency;
u32 rsvd2;
u16 rsvd3;
u16 tsid;
} isdbs_search;
struct {
u8 flags;
u8 bandwidth;
u8 rsvd1;
u8 retry;
u32 frequency;
} dvbc_search;
struct {
u8 flags; /* Bit 0: LP Stream */
u8 bandwidth;
u8 rsvd1;
u8 retry;
u32 frequency;
} dvbt_search;
struct {
u8 flags; /* Bit 0: T2 Lite Profile, 7: PLP, */
u8 bandwidth;
u8 rsvd1;
u8 retry;
u32 frequency;
u32 reserved;
u8 plp;
u8 rsvd2[3];
} dvbt2_search;
struct {
u8 flags;
u8 bandwidth;
u8 rsvd1;
u8 retry;
u32 frequency;
u32 reserved;
u8 plp;
u8 data_slice;
u8 rsvd2[2];
} dvbc2_search;
struct {
u8 flags;
u8 bandwidth;
u8 rsvd1;
u8 retry;
u32 frequency;
} isdbt_search;
struct {
u8 flags; /* Bit 0: 0 = TSID is Transport Stream ID, 1 = TSID is relative stream number */
/* Bit 2..1: 0 = force single, 1 = force multi, 2 = auto detect */
u8 bandwidth;
u8 rsvd1;
u8 retry;
u32 frequency;
u32 rsvd2;
u16 onid;
u16 tsid;
} isdbc_search;
struct {
u8 flags;
u8 bandwidth;
u8 rsvd1;
u8 retry;
u32 frequency;
} j83b_search;
struct {
u8 flags; // Bit 0 : 1 = short info (1st 4 Bytes)
} get_signalinfo;
struct {
u8 tap;
u8 rsvd;
u16 point;
} get_iq_symbol;
struct {
uint8_t flags; /* Bit 0 : 0 = VTM/SDR, 1 = SCAN,
Bit 1: 1 = Disable AGC,
Bit 2: 1 = Set Gain. */
uint8_t roll_off;
uint8_t rsvd1;
uint8_t rsvd2;
uint32_t frequency;
uint32_t symbol_rate; /* Only in VTM/SDR mode, SCAN Mode uses exactly 1550/24 MSymbols/s.*/
uint8_t gain; /* Gain in 0.25 dB Steps */
/* Frequency, symbolrate and gain can be schanged while running */
} sx8_start_iq;
struct {
uint8_t flags;
/* Bit 0:1 Preamp Mode; 0 = Preamp AGC, 1 == Minimum (~ -17dB) ,
2 = Medium, 3 = Maximum gain {~ 15dB}
Bit 2: Bypass Input LNA (6 dB less gain) (Note this is after Preamp)
Bit 4: Set RF Gain
Bit 5: Freeze RF Gain (Turn AGC off at current gain, only when already enabled)
Bit 7: Optimize RF Gain and freeze for FFT */
uint8_t rf_gain; /* 0 .. 50 dB */
} sx8_input_enable;
struct {
u8 offset; // Offset into list, must be multiple of 64
u8 select; // 0 = Slices, 1 = PLPs (C2 Only)
u8 data_slice; // DataSlice to get PLPList (C2 Only)
} get_ids;
struct {
u8 select; // 0 = Base, 1 = DataSilce, 2 = PLP, Bit 7: Set new ID
u8 id; // DataSliceID, PLPId
} get_l1_info;
struct {
u8 select; // 0 = Data PLP, 1 = Common PLP, only DVB-T2 and DVB-C2
} get_bb_header;
};
};
struct mci_result {
union {
u32 status_word;
struct {
u8 status;
u8 mode;
u16 time;
};
};
union {
u32 result[27];
struct {
u8 Rsvd0[3];
u8 Flags;
u32 frequency; // actual frequency in Hz
u32 rsvd1;
s16 channel_power; // channel power in dBm x 100
s16 rsvd2;
s16 signal_to_noise; // SNR in dB x 100, Note: negativ values are valid in DVB-S2
s16 rsvd3;
u32 rsvd4;
u32 ber_numerator; /* Bit error rate: PreRS in DVB-S, PreBCH in DVB-S2X */
u32 ber_denominator;
u32 ber_rsvd1; // Place holder for modulation bit error rate
u32 ber_rsvd2;
} common_signal_info;
struct {
u8 standard; /* 1 = DVB-S, 2 = DVB-S2X */
u8 pls_code; /* PLS code for DVB-S2/S2X, puncture rate for DVB-S */
u8 roll_off; /* 2-0: rolloff, 7: spectrum inversion */
u8 flags;
u32 frequency; /* actual frequency in Hz */
u32 symbol_rate; /* actual symbolrate in Hz */
s16 channel_power; /* channel power in dBm x 100 */
s16 band_power; /*/ band power in dBm x 100 */
s16 signal_to_noise; /* SNR in dB x 100, Note: negativ values are valid in DVB-S2 */
s16 rsvd2;
u32 packet_errors; /* Counter for packet errors. (set to 0 on Start command) */
u32 ber_numerator; /* Bit error rate: PreRS in DVB-S, PreBCH in DVB-S2X */
u32 ber_denominator;
} dvbs2_signal_info;
struct {
u8 modcod;
u8 rsvd0[2];
u8 flags; /* Bit 0: TMCC changed, Bit 1: EWS */
u32 frequency; /* actual frequency in Hz */
u32 symbol_rate; /* actual symbolrate in Hz */
s16 channel_power; /* channel power in dBm x 100 */
s16 band_power; /*/ band power in dBm x 100 */
s16 signal_to_noise; /* SNR in dB x 100, Note: negativ values are valid in DVB-S2 */
s16 rsvd2;
u32 packet_errors; /* Counter for packet errors. (set to 0 on Start command) */
u32 ber_numerator; /* Bit error rate: PreRS in DVB-S, PreBCH in DVB-S2X */
u32 ber_denominator;
} isdbs_signal_info;
struct {
u8 constellation;
u8 rsvd0[2];
u8 flags;
u32 frequency; /* actual frequency in Hz */
u32 symbol_rate; /* actual symbolrate in Hz */
s16 channel_power; /* channel power in dBm x 100 */
s16 band_power; /* band power in dBm x 100 */
s16 signal_to_noise; /* SNR in dB x 100, Note: negativ values are valid in DVB-S2 */
s16 rsvd2;
u32 packet_errors; /* Counter for packet errors. (set to 0 on Start command) */
u32 ber_numerator; /* Bit error rate: PreRS */
u32 ber_denominator;
} dvbc_signal_info;
struct {
u8 modulation1; // bit 7..6: Constellation, bit 5..3 Hierachy, bit 2..0 CodeRate High
u8 modulation2; // bit 7..5: CodeRate Low, bit 4..3 Guard Interval, bit 2..1 FFT Mode
u8 Rsvd0;
u8 Flags;
u32 frequency; /* actual frequency in Hz */
u32 rsvd1;
s16 channel_power; /* channel power in dBm x 100 */
s16 band_power; /* band power in dBm x 100 */
s16 signal_to_noise; /* SNR in dB x 100, Note: negativ values are valid in DVB-S2 */
s16 rsvd2;
u32 packet_errors; /* Counter for packet errors. (set to 0 on Start command) */
u32 ber_numerator; /* Bit error rate: PreRS */
u32 ber_denominator;
} dvbt_signal_info;
struct {
u8 rsvd0[3];
u8 flags;
u32 frequency; /* actual frequency in Hz */
u32 rsvd1;
s16 channel_power; /* channel power in dBm x 100 */
s16 band_power; /* band power in dBm x 100 */
s16 signal_to_noise; /* SNR in dB x 100, Note: negativ values are valid in DVB-S2 */
s16 rsvd2;
u32 packet_errors; /* Counter for packet errors. (set to 0 on Start command) */
u32 ber_numerator; /* Bit error rate: PreRS */
u32 ber_denominator;
} dvbt2_signal_info;
struct {
u8 rsvd0[3];
u8 flags;
u32 frequency; // actual frequency in Hz
u32 rsvd1; //
s16 channel_power; // channel power in dBm x 100
s16 band_power; // band power in dBm x 100
s16 signal_to_noise; // SNR in dB x 100, Note: negativ values are valid in DVB-S2
s16 rsvd2;
u32 packet_errors; // Counter for packet errors. (set to 0 on Start command)
u32 ber_numerator; // Bit error rate: PreBCH
u32 ber_denominator;
} dvbc2_signal_info;
struct {
u8 rsvd0[3];
u8 flags;
u32 frequency; // actual frequency in Hz
u32 rsvd1; //
s16 channel_power; // channel power in dBm x 100
s16 band_power; // band power in dBm x 100
s16 signal_to_noise; // SNR in dB x 100, Note: negativ values are valid in DVB-S2
s16 rsvd2;
u32 packet_errors; // Counter for packet errors. (set to 0 on Start command)
u32 ber_numerator; // Bit error rate: PreRS Segment A
u32 ber_denominator;
u32 ber_rsvd1; // Place holder for modulation bit error rate
u32 ber_rsvd2;
u32 ber_numeratorB; // Bit error rate: PreRS Segment B
u32 ber_numeratorC; // Bit error rate: PreRS Segment C
} isdbt_signal_info;
struct {
u8 Constellation;
u8 Rsvd0[2];
u8 Flags;
u32 Frequency; // actual frequency in Hz
u32 SymbolRate; // actual symbolrate in Hz
s16 ChannelPower; // channel power in dBm x 100
s16 BandPower; // band power in dBm x 100
s16 SignalToNoise; // SNR in dB x 100, Note: negativ values are valid in DVB-S2
s16 Rsvd2;
u32 PacketErrors; // Counter for packet errors. (set to 0 on Start command)
u32 BERNumerator; // Bit error rate: PreRS in DVB-S, PreBCH in DVB-S2X
u32 BERDenominator;
} ISDBC_SignalInfo;
struct {
u8 Constellation;
u8 Interleaving;
u8 Rsvd0;
u8 Flags;
u32 Frequency; // actual frequency in Hz
u32 SymbolRate; // actual symbolrate in Hz
s16 ChannelPower; // channel power in dBm x 100
s16 BandPower; // band power in dBm x 100
s16 SignalToNoise; // SNR in dB x 100, Note: negativ values are valid in DVB-S2
s16 Rsvd2;
u32 PacketErrors; // Counter for packet errors. (set to 0 on Start command)
u32 BERNumerator; // Bit error rate: PreRS in DVB-S, PreBCH in DVB-S2X
u32 BERDenominator;
} J83B_SignalInfo;
struct {
s16 i;
s16 q;
} iq_symbol;
struct {
u8 TPSInfo[7];
// uint16_t TPS_CellID; // Cell Identifier
} DVBT_TPSInfo;
struct {
struct {
u8 Type;
u8 BWExtension;
u8 S1;
u8 S2;
u8 L1RepetitionFlag;
u8 GuardInterval;
u8 PAPR;
u8 L1Mod;
u8 L1Cod;
u8 L1FECType;
u8 L1PostSize[3];
u8 L1PostInfoSize[3];
u8 PilotPattern;
u8 TXIDAvailabilty;
u8 CellID[2];
u8 NetworkID[2];
u8 T2SystemID[2];
u8 NumT2Frames;
u8 NumDataSymbols[2];
u8 RegenFlag;
u8 L1PostExtension;
u8 NumRF;
u8 CurrentRFIndex;
u8 T2Version_PostScrambled_BaseLite_Rsvd[2]; // 4,1,1,4 bit
u8 CRC32[4];
} DVBT2_L1Pre;
struct {
u8 SubSlicesPerFrame[2];
u8 NumPLP;
u8 NumAux;
u8 AuxConfigRFU;
u8 RFIndex;
u8 Frequency[4];
u8 FEFType;
u8 FEFLength[3];
u8 FEFInterval;
} DVBT2_L1Post;
} DVBT2_L1Info;
struct {
u8 PLPID;
u8 Type;
u8 PayloadType;
u8 FFFlag;
u8 FirstRFIndex;
u8 FirstFrameIndex;
u8 GroupID;
u8 Cod;
u8 Mod;
u8 Rotation;
u8 FECType;
u8 NumBlocksMax[2];
u8 FrameInterval;
u8 TimeILLength;
u8 TimeILType;
u8 InBandAFlag;
u8 InBandBFlag_Rsvd1_Mode_StaticFlag_StaticPaddingFlag[2]; // 1,11,2,1,1
} DVBT2_PLPInfo;
struct {
u8 NetworkID[2];
u8 C2SystemID[2];
u8 StartFrequency[3];
u8 C2BandWidth[2];
u8 GuardInterval;
u8 C2FrameLength[2];
u8 L1P2ChangeCounter;
u8 NumDataSlices;
u8 NumNotches;
struct {
u8 Start[2];
u8 Width[2];
u8 Reserved3;
} NotchData[15];
u8 ReservedTone;
u8 Reserved4[2]; // EWS 1 bit, C2_Version 4 bit, Rsvd 11 bit
} DVBC2_L1Part2;
struct {
u8 NumIDs;
u8 Offset;
u8 IDs[64];
} DVBC2_IDList;
struct {
u8 SliceID;
u8 TunePosition[2];
u8 OffsetLeft[2];
u8 OffsetRight[2];
u8 TIDepth;
u8 Type;
u8 FECHeaderType;
u8 ConstConf;
u8 LeftNotch;
u8 NumPLP;
u8 Reserved2;
} DVBC2_SliceInfo;
struct {
u8 PLPID;
u8 Bundled;
u8 Type;
u8 PayloadType;
u8 GroupID;
u8 Start[2];
u8 FECType;
u8 Mod;
u8 Cod;
u8 PSISIReprocessing;
u8 TransportstreamID[2];
u8 OrginalNetworkID[2];
u8 Reserved1;
} DVBC2_PLPInfo;
struct {
u8 Valid;
u8 MATYPE_1;
u8 MATYPE_2;
u8 UPL[2];
u8 DFL[2];
u8 SYNC;
u8 SYNCD[2];
u8 rsvd;
u8 ISSY[3];
u8 min_input_stream_id;
u8 max_input_stream_id;
} BBHeader;
struct {
u8 Mode; // FFT Mode 1,2,3
u8 GuardInterval; // 1/32, 1/16, 1/8, /14
u8 TMCCInfo[13]; // TMCC B20 - B121, byte 0 bit 7: B20, byte 12 bit 2: B121
} ISDBT_TMCCInfo;
struct {
u8 Change; // 5 bits, increments with every change
struct {
u8 ModCod; // 4 bits
u8 NumSlots; // 6 bits
} Mode[4];
u8 RelTSID[24]; // bit 6..4 Relative TSID for slot i*2 + 1, bit 2..0 Relative TSID for slot i*2 + 2
struct {
u8 highByte;
u8 lowByte;
} TSID[8];
u8 Flags; // Bit 5: EWS flag, bit 4: Site Diversity flag, bit 3..1: Site Diversity information, bit 0: Extension flag
u8 Extension[8]; // 61 bits, right aligned
} ISDBS_TMCCInfo;
};
u32 version[3];
u8 version_rsvd;
u8 version_major;
u8 version_minor;
u8 version_sub;
};
/* Helper Macros */
/* DVB-T2 L1-Pre Signalling Data ( ETSI EN 302 755 V1.4.1 Chapter 7.2.2 ) */
#define L1PRE_TYPE(p) ((p)[0] & 0xFF)
#define L1PRE_BWT_EXT(p) ((p)[1] & 0x01)
#define L1PRE_S1(p) ((p)[2] & 0x07)
#define L1PRE_S2(p) ((p)[3] & 0x0F)
#define L1PRE_L1_REPETITION_FLAG(p) ((p)[4] & 0x01)
#define L1PRE_GUARD_INTERVAL(p) ((p)[5] & 0x07)
#define L1PRE_PAPR(p) ((p)[6] & 0x0F)
#define L1PRE_L1_MOD(p) ((p)[7] & 0x0F)
#define L1PRE_L1_COD(p) ((p)[8] & 0x03)
#define L1PRE_L1_FEC_TYPE(p) ((p)[9] & 0x03)
#define L1PRE_L1_POST_SIZE(p) (((u32)((p)[10] & 0x03) << 16) | ((u32)(p)[11] << 8) | (p)[12])
#define L1PRE_L1_POST_INFO_SIZE(p) (((u32)((p)[13] & 0x03) << 16) | ((u32)(p)[14] << 8) | (p)[15])
#define L1PRE_PILOT_PATTERN(p) ((p)[16] & 0x0F)
#define L1PRE_TX_ID_AVAILABILITY(p) ((p)[17] & 0xFF)
#define L1PRE_CELL_ID(p) (((u16)(p)[18] << 8) | (p)[19])
#define L1PRE_NETWORK_ID(p) (((u16)(p)[20] << 8) | (p)[21])
#define L1PRE_T2_SYSTEM_ID(p) (((u16)(p)[22] << 8) | (p)[23])
#define L1PRE_NUM_T2_FRAMES(p) ((p)[24] & 0xFF)
#define L1PRE_NUM_DATA_SYMBOLS(p) (((u16)((p)[25] & 0x0F) << 8) | (p)[26])
#define L1PRE_REGEN_FLAG(p) ((p)[27] & 0x07)
#define L1PRE_L1_POST_EXTENSION(p) ((p)[28] & 0x01)
#define L1PRE_NUM_RF(p) ((p)[29] & 0x07)
#define L1PRE_CURRENT_RF_IDX(p) ((p)[30] & 0x07)
#define L1PRE_T2_VERSION(p) ((((p)[31] & 0x03) << 2) | (((p)[32] & 0xC0) >> 6))
#define L1PRE_L1_POST_SCRAMBLED(p) (((p)[32] & 0x20) >> 5)
#define L1PRE_T2_BASE_LITE(p) (((p)[32] & 0x10) >> 4)
/* DVB-T2 L1-Post Signalling Data ( ETSI EN 302 755 V1.4.1 Chapter 7.2.3 ) */
#define L1POST_SUB_SLICES_PER_FRAME(p) (((u16)(p)[0] & 0x7F) | (p)[1])
#define L1POST_NUM_PLP(p) ((p)[2] & 0xFF)
#define L1POST_NUM_AUX(p) ((p)[3] & 0x0F)
#define L1POST_AUX_CONFIG_RFU(p) ((p)[4] & 0xFF)
#define L1POST_RF_IDX(p) ((p)[5] & 0x07)
#define L1POST_FREQUENCY(p) (((u32)(p)[6] << 24) | ((u32)(p)[7] << 16) | ((u32)(p)[8] << 8) | (p)[9])
#define L1POST_FEF_TYPE(p) ((p)[10] & 0x0F)
#define L1POST_FEF_LENGTH(p) (((u32)(p)[11] << 16) | ((u32)(p)[12] << 8) | (p)[13])
#define L1POST_FEF_INTERVAL(p) ((p)[14] & 0xFF)
/* Repeated for each PLP, */
/* Hardware is restricted to retrieve only values for current data PLP and common PLP */
#define L1POST_PLP_ID(p) ((p)[0] & 0xFF)
#define L1POST_PLP_TYPE(p) ((p)[1] & 0x07)
#define L1POST_PLP_PAYLOAD_TYPE(p) ((p)[2] & 0x1F)
#define L1POST_FF_FLAG(p) ((p)[3] & 0x01)
#define L1POST_FIRST_RF_IDX(p) ((p)[4] & 0x07)
#define L1POST_FIRST_FRAME_IDX(p) ((p)[5] & 0xFF)
#define L1POST_PLP_GROUP_ID(p) ((p)[6] & 0xFF)
#define L1POST_PLP_COD(p) ((p)[7] & 0x07)
#define L1POST_PLP_MOD(p) ((p)[8] & 0x07)
#define L1POST_PLP_ROTATION(p) ((p)[9] & 0x01)
#define L1POST_PLP_FEC_TYPE(p) ((p)[10] & 0x03)
#define L1POST_PLP_NUM_BLOCKS_MAX(p) (((u16)((p)[11] & 0x03) << 8) | (p)[12])
#define L1POST_FRAME_INTERVAL(p) ((p)[13] & 0xFF)
#define L1POST_TIME_IL_LENGTH(p) ((p)[14] & 0xFF)
#define L1POST_TIME_IL_TYPE(p) ((p)[15] & 0x01)
#define L1POST_IN_BAND_A_FLAG(p) ((p)[16] & 0x01)
#define L1POST_IN_BAND_B_FLAG(p) (((p)[17] >> 7) & 0x01)
#define L1POST_RESERVED_1(p) (((u16)((p)[17] & 0x7F) << 4) | ((p)[18] & 0xF0) >> 4)
#define L1POST_PLP_MODE(p) (((p)[18] >> 2) & 0x03)
#define L1POST_STATIC_FLAG(p) (((p)[18] >> 1) & 0x01)
#define L1POST_STATIC_PADDING_FLAG(p) (((p)[18] >> 1) & 0x01)
struct mci_base {
struct list_head mci_list;
void *key;
struct ddb_link *link;
// struct completion completion;
struct mutex tuner_lock;
// struct mutex mci_lock;
int count;
int type;
};
struct mci {
struct ddb_io *input;
struct mci_base *base;
struct dvb_frontend fe;
int nr;
int demod;
int tuner;
struct mci_result signal_info;
};
struct mci_cfg {
int type;
struct dvb_frontend_ops *fe_ops;
u32 base_size;
u32 state_size;
int (*init)(struct mci *mci);
int (*base_init)(struct mci_base *mci_base);
};
int ddb_mci_cmd(struct mci *state, struct mci_command *command, struct mci_result *result);
int ddb_mci_cmd_link(struct ddb_link *link, struct mci_command *command, struct mci_result *result);
int ddb_mci_get_status(struct mci *mci, struct mci_result *res);
int ddb_mci_get_snr(struct dvb_frontend *fe);
int ddb_mci_get_info(struct mci *mci);
int ddb_mci_get_strength(struct dvb_frontend *fe);
void ddb_mci_proc_info(struct mci *mci, struct dtv_frontend_properties *p);
int mci_init(struct ddb_link *link);
int mci_cmd_val(struct ddb_link *link, uint32_t cmd, uint32_t val);
extern struct mci_cfg ddb_max_sx8_cfg;
extern struct mci_cfg ddb_max_m4_cfg;
#endif
Reference in New Issue View Git Blame Copy Permalink