hyperion.ng/libsrc/leddevice/dev_other/LedDevicePiBlaster.cpp

191 lines
4.1 KiB
C++
Raw Normal View History

// STL includes
#include <cstring>
Piblaster fix (#614) * Removed -HUP so the default -TERM signal is sent instead. - hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config Changed pgrep to add '-x' so it wont partial match on the exe name. - I have multiple instances with multiple hyperiond-instance1 names - this ensures the service script only kills the right process * reversing errant change to hyperion.systemd.sh * Experimental changes to piblaster code to work how i think it should It is now assumed that the PWM pins in groups of 3 correspond to RGB channels of the led. "assignment" : "rgbrgbrgb", Would result in: //Channel number GPIO number Led channel // 0 4 0 red // 1 17 0 green // 2 18 0 blue // 4 27 1 red // 5 21 1 green // 6 22 1 blue // 7 23 2 red // 8 24 2 green // 9 25 2 blue * Ammend pwm channel mapping comments to match the code * 1st cut of the new more flexible piblaster pin mapping support it works but is still rough * removed old "assignment" handling - prints an error messaage if found and terminates fixed the switchoff method * removing iPins hard coded list of valid GPIO pins * removed iPins array for switchOff function * code cleanups input validation * Handle catching (and ignoring) SIGPIPE. You can now kill and restart pi-blaster daemon and hyperiond will gracefully recover * added a binary for testing * Added sample config and my modified pi-blaster version to support more GPIOs * moved hyperiond * removed testing binaries move sample configuration to the configs directory * re enabled device config display * removed sample configuration Former-commit-id: 95e4d4ea2fb7cb5439e8cd597883a638da61a574
2016-04-29 16:00:33 +02:00
#include <csignal>
// QT includes
#include <QFile>
// Local LedDevice includes
#include "LedDevicePiBlaster.h"
JsonCpp to QTJson (Final Part) (#273) * Update CMakeLists.txt * Update Hyperion.h * Update LedDevice.h * Update LedDeviceFactory.h * Update Hyperion.cpp * Update LedString.cpp * Update JsonClientConnection.cpp * Update LedDeviceAdalight.cpp * Update LedDeviceAdalight.h * Update LedDeviceAPA102.cpp * Update LedDeviceAdalightApa102.h * Update LedDeviceAdalightApa102.cpp * Update LedDeviceAPA102.h * Update LedDeviceAtmo.cpp * Update LedDeviceAtmo.h * Update LedDeviceAtmoOrb.cpp * Update LedDeviceAtmoOrb.h * Update LedDeviceDMX.cpp * Update LedDeviceDMX.h * Update LedDeviceFactory.cpp * Update LedDeviceFadeCandy.cpp * Update LedDeviceFadeCandy.h * Update LedDeviceFile.cpp * Update LedDeviceFile.h * Update LedDeviceHyperionUsbasp.cpp * Update LedDeviceHyperionUsbasp.h * Update LedDeviceLightpack.cpp * Update LedDeviceLightpack.h * Update LedDeviceLpd6803.cpp * Update LedDeviceLpd6803.h * Update LedDeviceLpd8806.cpp * Update LedDeviceLpd8806.h * Update LedDeviceMultiLightpack.cpp * Update LedDeviceMultiLightpack.h * Update LedDeviceP9813.cpp * Update LedDeviceP9813.h * Update LedDevicePaintpack.cpp * Update LedDevicePaintpack.h * Update LedDevicePhilipsHue.cpp * Update LedDevicePhilipsHue.h * Update LedDevicePiBlaster.cpp * Update LedDevicePiBlaster.h * Update LedDeviceRawHID.cpp * Update LedDeviceRawHID.h * Update LedDeviceSedu.cpp * Update LedDeviceSedu.h * Update LedDeviceSk6812SPI.cpp * Update LedDeviceSk6812SPI.h * Update LedDeviceTinkerforge.cpp * Update LedDeviceTinkerforge.h * Update LedDeviceTpm2.cpp * Update LedDeviceTpm2.h * Update LedDeviceTpm2net.cpp * Update LedDeviceTpm2net.h * Update LedDeviceUdpE131.cpp * Update LedDeviceUdpE131.h * Update LedDeviceUdpH801.cpp * Update LedDeviceUdpH801.h * Update LedDeviceUdpRaw.cpp * Update LedDeviceUdpRaw.h * Update LedDeviceWs2801.cpp * Update LedDeviceWs2801.h * Update LedDeviceWS2812b.cpp * Update LedDeviceWS2812b.h * Update LedDeviceWs2812SPI.cpp * Update LedDeviceWs2812SPI.h * Update LedDeviceWS281x.cpp * Update LedDeviceWS281x.h * Update ProviderHID.cpp * Update ProviderHID.h * Update ProviderRs232.cpp * Update ProviderRs232.h * Update ProviderSpi.cpp * Update ProviderSpi.h * Update ProviderUdp.cpp * Update ProviderUdp.h * Update LedDevice.cpp * Update CMakeLists.txt * Update hyperiond.cpp * Update hyperiond.h * Update TestSpi.cpp * Delete AUTHORS * Delete CMakeLists.txt * Delete LICENSE * Delete json_batchallocator.h * Delete json_internalarray.inl * Delete json_internalmap.inl * Delete json_reader.cpp * Delete json_tool.h * Delete json_value.cpp * Delete json_valueiterator.inl * Delete json_writer.cpp * Delete sconscript * Delete autolink.h * Delete config.h * Delete features.h * Delete forwards.h * Delete json.h * Delete reader.h * Delete value.h * Delete writer.h
2016-10-13 21:59:58 +02:00
LedDevicePiBlaster::LedDevicePiBlaster(const QJsonObject &deviceConfig)
: _fid(nullptr)
{
Disentangle LedDevice/LinearColorSmoothing, Bug Fixes & Test support (#654) * Handle Exceptions in main & Pythoninit * Have SSDPDiscover generic again * Have SSDPDiscover generic again * Change Info- to Debug logs as technical service messages * Nanoleaf - When switched on, ensure UDP mode * Include SQL Database in Cross-Compile instructions * Fix Clazy (QT code checker) and clang Warnings * Stop LedDevice:write for disabled device * Nanoleaf: Fix uint printfs * NanoLeaf: Fix indents to tabs * NanoLeaf - Add debug verbosity switches * Device switchability support, FileDevice with timestamp support * Nanoleaf Light Panels now support External Control V2 * Enhance LedDeviceFile by Timestamp + fix readyness * Stop color stream, if LedDevice disabled * Nanoleaf - remove switchability * Fix MultiColorAdjustment, if led-range is greater lednum * Fix logging * LedFileDevice/LedDevice - add testing support * New "Led Test" effect * LedDeviceFile - Add chrono include + Allow Led rewrites for testing * Stabilize Effects for LedDevices where latchtime = 0 * Update LedDeviceFile, allow latchtime = 0 * Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates * Updates LedDeviceFile - Initialize via Open * Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions * Updates ProviderUDP - Remove throwing exceptions * Framebuffer - Use precise timer * TestSpi - Align to LedDevice updates * Pretty Print CrossCompileHowTo as markdown-file * Ensure that output is only written when LedDevice is ready * Align APA102 Device to new device staging * Logger - Remove clang warnings on extra semicolon * Devices SPI - Align to Device stages and methods * Fix cppcheck and clang findings * Add Code-Template for new Devices * Align devices to stages and methods, clean-up some code * Allow to reopen LedDevice without restart * Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes" * Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic * Expose LedDevice getLedCount and align signedness
2020-02-10 15:21:58 +01:00
_devConfig = deviceConfig;
LED Device Features, Fixes and Refactoring (Resubmit PR855) (#875) * Refactor LedDevices - Initial version * Small renamings * Add WLED as own device * Lpd8806 Remove open() method * remove dependency on Qt 5.10 * Lpd8806 Remove open() method * Update WS281x * Update WS2812SPI * Add writeBlack for WLED powerOff * WLED remove extra bracket * Allow different Nanoleaf panel numbering sequence (Feature req.#827) * build(deps): bump websocket-extensions from 0.1.3 to 0.1.4 in /docs (#826) * Bumps [websocket-extensions](https://github.com/faye/websocket-extensions-node) from 0.1.3 to 0.1.4. - [Release notes](https://github.com/faye/websocket-extensions-node/releases) - [Changelog](https://github.com/faye/websocket-extensions-node/blob/master/CHANGELOG.md) - [Commits](https://github.com/faye/websocket-extensions-node/compare/0.1.3...0.1.4) * Fix typos * Nanoleaf clean-up * Yeelight support, generalize wizard elements * Update Yeelight to handle quota in music mode * Yeelight extend rage for extraTimeDarkness for testing * Clean-up - Add commentary, Remove development debug statements * Fix brightnessSwitchOffOnMinimum typo and default value * Yeelight support restoreOriginalState, additional Fixes * WLED - Remove UDP-Port, as it is not configurable * Fix merging issue * Remove QHostAddress::operator=(const QString&)' is deprecated * Windows compile errors and (Qt 5.15 deprecation) warnings * Fix order includes * LedDeviceFile Support Qt5.7 and greater * Windows compatibility and other Fixes * Fix Qt Version compatability * Rs232 - Resolve portname from unix /dev/ style, fix DMX sub-type support * Disable WLED Wizard Button (until Wizard is available) * Yeelight updates * Add wrong log-type as per #505 * Fixes and Clean-up after clang-tidy report * Fix udpe131 not enabled for generated CID * Change timer into dynamic for Qt Thread-Affinity * Hue clean-up and diyHue workaround * Updates after review feedback by m-seker * Add "chrono" includes
2020-07-12 20:27:56 +02:00
_isDeviceReady = false;
_activeDeviceType = deviceConfig["type"].toString("UNSPECIFIED").toLower();
Disentangle LedDevice/LinearColorSmoothing, Bug Fixes & Test support (#654) * Handle Exceptions in main & Pythoninit * Have SSDPDiscover generic again * Have SSDPDiscover generic again * Change Info- to Debug logs as technical service messages * Nanoleaf - When switched on, ensure UDP mode * Include SQL Database in Cross-Compile instructions * Fix Clazy (QT code checker) and clang Warnings * Stop LedDevice:write for disabled device * Nanoleaf: Fix uint printfs * NanoLeaf: Fix indents to tabs * NanoLeaf - Add debug verbosity switches * Device switchability support, FileDevice with timestamp support * Nanoleaf Light Panels now support External Control V2 * Enhance LedDeviceFile by Timestamp + fix readyness * Stop color stream, if LedDevice disabled * Nanoleaf - remove switchability * Fix MultiColorAdjustment, if led-range is greater lednum * Fix logging * LedFileDevice/LedDevice - add testing support * New "Led Test" effect * LedDeviceFile - Add chrono include + Allow Led rewrites for testing * Stabilize Effects for LedDevices where latchtime = 0 * Update LedDeviceFile, allow latchtime = 0 * Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates * Updates LedDeviceFile - Initialize via Open * Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions * Updates ProviderUDP - Remove throwing exceptions * Framebuffer - Use precise timer * TestSpi - Align to LedDevice updates * Pretty Print CrossCompileHowTo as markdown-file * Ensure that output is only written when LedDevice is ready * Align APA102 Device to new device staging * Logger - Remove clang warnings on extra semicolon * Devices SPI - Align to Device stages and methods * Fix cppcheck and clang findings * Add Code-Template for new Devices * Align devices to stages and methods, clean-up some code * Allow to reopen LedDevice without restart * Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes" * Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic * Expose LedDevice getLedCount and align signedness
2020-02-10 15:21:58 +01:00
// initialise the mapping tables
// -1 is invalid
// z is also meaningless
// { "gpio" : 4, "ledindex" : 0, "ledcolor" : "r" },
Piblaster fix (#614) * Removed -HUP so the default -TERM signal is sent instead. - hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config Changed pgrep to add '-x' so it wont partial match on the exe name. - I have multiple instances with multiple hyperiond-instance1 names - this ensures the service script only kills the right process * reversing errant change to hyperion.systemd.sh * Experimental changes to piblaster code to work how i think it should It is now assumed that the PWM pins in groups of 3 correspond to RGB channels of the led. "assignment" : "rgbrgbrgb", Would result in: //Channel number GPIO number Led channel // 0 4 0 red // 1 17 0 green // 2 18 0 blue // 4 27 1 red // 5 21 1 green // 6 22 1 blue // 7 23 2 red // 8 24 2 green // 9 25 2 blue * Ammend pwm channel mapping comments to match the code * 1st cut of the new more flexible piblaster pin mapping support it works but is still rough * removed old "assignment" handling - prints an error messaage if found and terminates fixed the switchoff method * removing iPins hard coded list of valid GPIO pins * removed iPins array for switchOff function * code cleanups input validation * Handle catching (and ignoring) SIGPIPE. You can now kill and restart pi-blaster daemon and hyperiond will gracefully recover * added a binary for testing * Added sample config and my modified pi-blaster version to support more GPIOs * moved hyperiond * removed testing binaries move sample configuration to the configs directory * re enabled device config display * removed sample configuration Former-commit-id: 95e4d4ea2fb7cb5439e8cd597883a638da61a574
2016-04-29 16:00:33 +02:00
#define TABLE_SZ sizeof(_gpio_to_led)/sizeof(_gpio_to_led[0])
for (unsigned i=0; i < TABLE_SZ; i++ )
Piblaster fix (#614) * Removed -HUP so the default -TERM signal is sent instead. - hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config Changed pgrep to add '-x' so it wont partial match on the exe name. - I have multiple instances with multiple hyperiond-instance1 names - this ensures the service script only kills the right process * reversing errant change to hyperion.systemd.sh * Experimental changes to piblaster code to work how i think it should It is now assumed that the PWM pins in groups of 3 correspond to RGB channels of the led. "assignment" : "rgbrgbrgb", Would result in: //Channel number GPIO number Led channel // 0 4 0 red // 1 17 0 green // 2 18 0 blue // 4 27 1 red // 5 21 1 green // 6 22 1 blue // 7 23 2 red // 8 24 2 green // 9 25 2 blue * Ammend pwm channel mapping comments to match the code * 1st cut of the new more flexible piblaster pin mapping support it works but is still rough * removed old "assignment" handling - prints an error messaage if found and terminates fixed the switchoff method * removing iPins hard coded list of valid GPIO pins * removed iPins array for switchOff function * code cleanups input validation * Handle catching (and ignoring) SIGPIPE. You can now kill and restart pi-blaster daemon and hyperiond will gracefully recover * added a binary for testing * Added sample config and my modified pi-blaster version to support more GPIOs * moved hyperiond * removed testing binaries move sample configuration to the configs directory * re enabled device config display * removed sample configuration Former-commit-id: 95e4d4ea2fb7cb5439e8cd597883a638da61a574
2016-04-29 16:00:33 +02:00
{
_gpio_to_led[i] = -1;
_gpio_to_color[i] = 'z';
}
}
LedDevicePiBlaster::~LedDevicePiBlaster()
{
if (_fid != nullptr)
{
fclose(_fid);
_fid = nullptr;
}
}
JsonCpp to QTJson (Final Part) (#273) * Update CMakeLists.txt * Update Hyperion.h * Update LedDevice.h * Update LedDeviceFactory.h * Update Hyperion.cpp * Update LedString.cpp * Update JsonClientConnection.cpp * Update LedDeviceAdalight.cpp * Update LedDeviceAdalight.h * Update LedDeviceAPA102.cpp * Update LedDeviceAdalightApa102.h * Update LedDeviceAdalightApa102.cpp * Update LedDeviceAPA102.h * Update LedDeviceAtmo.cpp * Update LedDeviceAtmo.h * Update LedDeviceAtmoOrb.cpp * Update LedDeviceAtmoOrb.h * Update LedDeviceDMX.cpp * Update LedDeviceDMX.h * Update LedDeviceFactory.cpp * Update LedDeviceFadeCandy.cpp * Update LedDeviceFadeCandy.h * Update LedDeviceFile.cpp * Update LedDeviceFile.h * Update LedDeviceHyperionUsbasp.cpp * Update LedDeviceHyperionUsbasp.h * Update LedDeviceLightpack.cpp * Update LedDeviceLightpack.h * Update LedDeviceLpd6803.cpp * Update LedDeviceLpd6803.h * Update LedDeviceLpd8806.cpp * Update LedDeviceLpd8806.h * Update LedDeviceMultiLightpack.cpp * Update LedDeviceMultiLightpack.h * Update LedDeviceP9813.cpp * Update LedDeviceP9813.h * Update LedDevicePaintpack.cpp * Update LedDevicePaintpack.h * Update LedDevicePhilipsHue.cpp * Update LedDevicePhilipsHue.h * Update LedDevicePiBlaster.cpp * Update LedDevicePiBlaster.h * Update LedDeviceRawHID.cpp * Update LedDeviceRawHID.h * Update LedDeviceSedu.cpp * Update LedDeviceSedu.h * Update LedDeviceSk6812SPI.cpp * Update LedDeviceSk6812SPI.h * Update LedDeviceTinkerforge.cpp * Update LedDeviceTinkerforge.h * Update LedDeviceTpm2.cpp * Update LedDeviceTpm2.h * Update LedDeviceTpm2net.cpp * Update LedDeviceTpm2net.h * Update LedDeviceUdpE131.cpp * Update LedDeviceUdpE131.h * Update LedDeviceUdpH801.cpp * Update LedDeviceUdpH801.h * Update LedDeviceUdpRaw.cpp * Update LedDeviceUdpRaw.h * Update LedDeviceWs2801.cpp * Update LedDeviceWs2801.h * Update LedDeviceWS2812b.cpp * Update LedDeviceWS2812b.h * Update LedDeviceWs2812SPI.cpp * Update LedDeviceWs2812SPI.h * Update LedDeviceWS281x.cpp * Update LedDeviceWS281x.h * Update ProviderHID.cpp * Update ProviderHID.h * Update ProviderRs232.cpp * Update ProviderRs232.h * Update ProviderSpi.cpp * Update ProviderSpi.h * Update ProviderUdp.cpp * Update ProviderUdp.h * Update LedDevice.cpp * Update CMakeLists.txt * Update hyperiond.cpp * Update hyperiond.h * Update TestSpi.cpp * Delete AUTHORS * Delete CMakeLists.txt * Delete LICENSE * Delete json_batchallocator.h * Delete json_internalarray.inl * Delete json_internalmap.inl * Delete json_reader.cpp * Delete json_tool.h * Delete json_value.cpp * Delete json_valueiterator.inl * Delete json_writer.cpp * Delete sconscript * Delete autolink.h * Delete config.h * Delete features.h * Delete forwards.h * Delete json.h * Delete reader.h * Delete value.h * Delete writer.h
2016-10-13 21:59:58 +02:00
bool LedDevicePiBlaster::init(const QJsonObject &deviceConfig)
{
Disentangle LedDevice/LinearColorSmoothing, Bug Fixes & Test support (#654) * Handle Exceptions in main & Pythoninit * Have SSDPDiscover generic again * Have SSDPDiscover generic again * Change Info- to Debug logs as technical service messages * Nanoleaf - When switched on, ensure UDP mode * Include SQL Database in Cross-Compile instructions * Fix Clazy (QT code checker) and clang Warnings * Stop LedDevice:write for disabled device * Nanoleaf: Fix uint printfs * NanoLeaf: Fix indents to tabs * NanoLeaf - Add debug verbosity switches * Device switchability support, FileDevice with timestamp support * Nanoleaf Light Panels now support External Control V2 * Enhance LedDeviceFile by Timestamp + fix readyness * Stop color stream, if LedDevice disabled * Nanoleaf - remove switchability * Fix MultiColorAdjustment, if led-range is greater lednum * Fix logging * LedFileDevice/LedDevice - add testing support * New "Led Test" effect * LedDeviceFile - Add chrono include + Allow Led rewrites for testing * Stabilize Effects for LedDevices where latchtime = 0 * Update LedDeviceFile, allow latchtime = 0 * Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates * Updates LedDeviceFile - Initialize via Open * Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions * Updates ProviderUDP - Remove throwing exceptions * Framebuffer - Use precise timer * TestSpi - Align to LedDevice updates * Pretty Print CrossCompileHowTo as markdown-file * Ensure that output is only written when LedDevice is ready * Align APA102 Device to new device staging * Logger - Remove clang warnings on extra semicolon * Devices SPI - Align to Device stages and methods * Fix cppcheck and clang findings * Add Code-Template for new Devices * Align devices to stages and methods, clean-up some code * Allow to reopen LedDevice without restart * Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes" * Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic * Expose LedDevice getLedCount and align signedness
2020-02-10 15:21:58 +01:00
bool isInitOK = LedDevice::init(deviceConfig);
_deviceName = deviceConfig["output"].toString("/dev/pi-blaster");
Disentangle LedDevice/LinearColorSmoothing, Bug Fixes & Test support (#654) * Handle Exceptions in main & Pythoninit * Have SSDPDiscover generic again * Have SSDPDiscover generic again * Change Info- to Debug logs as technical service messages * Nanoleaf - When switched on, ensure UDP mode * Include SQL Database in Cross-Compile instructions * Fix Clazy (QT code checker) and clang Warnings * Stop LedDevice:write for disabled device * Nanoleaf: Fix uint printfs * NanoLeaf: Fix indents to tabs * NanoLeaf - Add debug verbosity switches * Device switchability support, FileDevice with timestamp support * Nanoleaf Light Panels now support External Control V2 * Enhance LedDeviceFile by Timestamp + fix readyness * Stop color stream, if LedDevice disabled * Nanoleaf - remove switchability * Fix MultiColorAdjustment, if led-range is greater lednum * Fix logging * LedFileDevice/LedDevice - add testing support * New "Led Test" effect * LedDeviceFile - Add chrono include + Allow Led rewrites for testing * Stabilize Effects for LedDevices where latchtime = 0 * Update LedDeviceFile, allow latchtime = 0 * Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates * Updates LedDeviceFile - Initialize via Open * Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions * Updates ProviderUDP - Remove throwing exceptions * Framebuffer - Use precise timer * TestSpi - Align to LedDevice updates * Pretty Print CrossCompileHowTo as markdown-file * Ensure that output is only written when LedDevice is ready * Align APA102 Device to new device staging * Logger - Remove clang warnings on extra semicolon * Devices SPI - Align to Device stages and methods * Fix cppcheck and clang findings * Add Code-Template for new Devices * Align devices to stages and methods, clean-up some code * Allow to reopen LedDevice without restart * Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes" * Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic * Expose LedDevice getLedCount and align signedness
2020-02-10 15:21:58 +01:00
if ( isInitOK )
{
Disentangle LedDevice/LinearColorSmoothing, Bug Fixes & Test support (#654) * Handle Exceptions in main & Pythoninit * Have SSDPDiscover generic again * Have SSDPDiscover generic again * Change Info- to Debug logs as technical service messages * Nanoleaf - When switched on, ensure UDP mode * Include SQL Database in Cross-Compile instructions * Fix Clazy (QT code checker) and clang Warnings * Stop LedDevice:write for disabled device * Nanoleaf: Fix uint printfs * NanoLeaf: Fix indents to tabs * NanoLeaf - Add debug verbosity switches * Device switchability support, FileDevice with timestamp support * Nanoleaf Light Panels now support External Control V2 * Enhance LedDeviceFile by Timestamp + fix readyness * Stop color stream, if LedDevice disabled * Nanoleaf - remove switchability * Fix MultiColorAdjustment, if led-range is greater lednum * Fix logging * LedFileDevice/LedDevice - add testing support * New "Led Test" effect * LedDeviceFile - Add chrono include + Allow Led rewrites for testing * Stabilize Effects for LedDevices where latchtime = 0 * Update LedDeviceFile, allow latchtime = 0 * Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates * Updates LedDeviceFile - Initialize via Open * Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions * Updates ProviderUDP - Remove throwing exceptions * Framebuffer - Use precise timer * TestSpi - Align to LedDevice updates * Pretty Print CrossCompileHowTo as markdown-file * Ensure that output is only written when LedDevice is ready * Align APA102 Device to new device staging * Logger - Remove clang warnings on extra semicolon * Devices SPI - Align to Device stages and methods * Fix cppcheck and clang findings * Add Code-Template for new Devices * Align devices to stages and methods, clean-up some code * Allow to reopen LedDevice without restart * Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes" * Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic * Expose LedDevice getLedCount and align signedness
2020-02-10 15:21:58 +01:00
QJsonArray gpioMapping = deviceConfig["gpiomap"].toArray();
Disentangle LedDevice/LinearColorSmoothing, Bug Fixes & Test support (#654) * Handle Exceptions in main & Pythoninit * Have SSDPDiscover generic again * Have SSDPDiscover generic again * Change Info- to Debug logs as technical service messages * Nanoleaf - When switched on, ensure UDP mode * Include SQL Database in Cross-Compile instructions * Fix Clazy (QT code checker) and clang Warnings * Stop LedDevice:write for disabled device * Nanoleaf: Fix uint printfs * NanoLeaf: Fix indents to tabs * NanoLeaf - Add debug verbosity switches * Device switchability support, FileDevice with timestamp support * Nanoleaf Light Panels now support External Control V2 * Enhance LedDeviceFile by Timestamp + fix readyness * Stop color stream, if LedDevice disabled * Nanoleaf - remove switchability * Fix MultiColorAdjustment, if led-range is greater lednum * Fix logging * LedFileDevice/LedDevice - add testing support * New "Led Test" effect * LedDeviceFile - Add chrono include + Allow Led rewrites for testing * Stabilize Effects for LedDevices where latchtime = 0 * Update LedDeviceFile, allow latchtime = 0 * Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates * Updates LedDeviceFile - Initialize via Open * Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions * Updates ProviderUDP - Remove throwing exceptions * Framebuffer - Use precise timer * TestSpi - Align to LedDevice updates * Pretty Print CrossCompileHowTo as markdown-file * Ensure that output is only written when LedDevice is ready * Align APA102 Device to new device staging * Logger - Remove clang warnings on extra semicolon * Devices SPI - Align to Device stages and methods * Fix cppcheck and clang findings * Add Code-Template for new Devices * Align devices to stages and methods, clean-up some code * Allow to reopen LedDevice without restart * Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes" * Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic * Expose LedDevice getLedCount and align signedness
2020-02-10 15:21:58 +01:00
if (gpioMapping.isEmpty())
{
this->setInError("PiBlaster: no gpiomap defined.");
return false;
Piblaster fix (#614) * Removed -HUP so the default -TERM signal is sent instead. - hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config Changed pgrep to add '-x' so it wont partial match on the exe name. - I have multiple instances with multiple hyperiond-instance1 names - this ensures the service script only kills the right process * reversing errant change to hyperion.systemd.sh * Experimental changes to piblaster code to work how i think it should It is now assumed that the PWM pins in groups of 3 correspond to RGB channels of the led. "assignment" : "rgbrgbrgb", Would result in: //Channel number GPIO number Led channel // 0 4 0 red // 1 17 0 green // 2 18 0 blue // 4 27 1 red // 5 21 1 green // 6 22 1 blue // 7 23 2 red // 8 24 2 green // 9 25 2 blue * Ammend pwm channel mapping comments to match the code * 1st cut of the new more flexible piblaster pin mapping support it works but is still rough * removed old "assignment" handling - prints an error messaage if found and terminates fixed the switchoff method * removing iPins hard coded list of valid GPIO pins * removed iPins array for switchOff function * code cleanups input validation * Handle catching (and ignoring) SIGPIPE. You can now kill and restart pi-blaster daemon and hyperiond will gracefully recover * added a binary for testing * Added sample config and my modified pi-blaster version to support more GPIOs * moved hyperiond * removed testing binaries move sample configuration to the configs directory * re enabled device config display * removed sample configuration Former-commit-id: 95e4d4ea2fb7cb5439e8cd597883a638da61a574
2016-04-29 16:00:33 +02:00
}
LED Device Features, Fixes and Refactoring (Resubmit PR855) (#875) * Refactor LedDevices - Initial version * Small renamings * Add WLED as own device * Lpd8806 Remove open() method * remove dependency on Qt 5.10 * Lpd8806 Remove open() method * Update WS281x * Update WS2812SPI * Add writeBlack for WLED powerOff * WLED remove extra bracket * Allow different Nanoleaf panel numbering sequence (Feature req.#827) * build(deps): bump websocket-extensions from 0.1.3 to 0.1.4 in /docs (#826) * Bumps [websocket-extensions](https://github.com/faye/websocket-extensions-node) from 0.1.3 to 0.1.4. - [Release notes](https://github.com/faye/websocket-extensions-node/releases) - [Changelog](https://github.com/faye/websocket-extensions-node/blob/master/CHANGELOG.md) - [Commits](https://github.com/faye/websocket-extensions-node/compare/0.1.3...0.1.4) * Fix typos * Nanoleaf clean-up * Yeelight support, generalize wizard elements * Update Yeelight to handle quota in music mode * Yeelight extend rage for extraTimeDarkness for testing * Clean-up - Add commentary, Remove development debug statements * Fix brightnessSwitchOffOnMinimum typo and default value * Yeelight support restoreOriginalState, additional Fixes * WLED - Remove UDP-Port, as it is not configurable * Fix merging issue * Remove QHostAddress::operator=(const QString&)' is deprecated * Windows compile errors and (Qt 5.15 deprecation) warnings * Fix order includes * LedDeviceFile Support Qt5.7 and greater * Windows compatibility and other Fixes * Fix Qt Version compatability * Rs232 - Resolve portname from unix /dev/ style, fix DMX sub-type support * Disable WLED Wizard Button (until Wizard is available) * Yeelight updates * Add wrong log-type as per #505 * Fixes and Clean-up after clang-tidy report * Fix udpe131 not enabled for generated CID * Change timer into dynamic for Qt Thread-Affinity * Hue clean-up and diyHue workaround * Updates after review feedback by m-seker * Add "chrono" includes
2020-07-12 20:27:56 +02:00
// walk through the JSON configuration and populate the mapping tables
Disentangle LedDevice/LinearColorSmoothing, Bug Fixes & Test support (#654) * Handle Exceptions in main & Pythoninit * Have SSDPDiscover generic again * Have SSDPDiscover generic again * Change Info- to Debug logs as technical service messages * Nanoleaf - When switched on, ensure UDP mode * Include SQL Database in Cross-Compile instructions * Fix Clazy (QT code checker) and clang Warnings * Stop LedDevice:write for disabled device * Nanoleaf: Fix uint printfs * NanoLeaf: Fix indents to tabs * NanoLeaf - Add debug verbosity switches * Device switchability support, FileDevice with timestamp support * Nanoleaf Light Panels now support External Control V2 * Enhance LedDeviceFile by Timestamp + fix readyness * Stop color stream, if LedDevice disabled * Nanoleaf - remove switchability * Fix MultiColorAdjustment, if led-range is greater lednum * Fix logging * LedFileDevice/LedDevice - add testing support * New "Led Test" effect * LedDeviceFile - Add chrono include + Allow Led rewrites for testing * Stabilize Effects for LedDevices where latchtime = 0 * Update LedDeviceFile, allow latchtime = 0 * Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates * Updates LedDeviceFile - Initialize via Open * Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions * Updates ProviderUDP - Remove throwing exceptions * Framebuffer - Use precise timer * TestSpi - Align to LedDevice updates * Pretty Print CrossCompileHowTo as markdown-file * Ensure that output is only written when LedDevice is ready * Align APA102 Device to new device staging * Logger - Remove clang warnings on extra semicolon * Devices SPI - Align to Device stages and methods * Fix cppcheck and clang findings * Add Code-Template for new Devices * Align devices to stages and methods, clean-up some code * Allow to reopen LedDevice without restart * Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes" * Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic * Expose LedDevice getLedCount and align signedness
2020-02-10 15:21:58 +01:00
for(QJsonArray::const_iterator gpioArray = gpioMapping.begin(); gpioArray != gpioMapping.end(); ++gpioArray)
{
const QJsonObject value = (*gpioArray).toObject();
const int gpio = value["gpio"].toInt(-1);
const int ledindex = value["ledindex"].toInt(-1);
const std::string ledcolor = value["ledcolor"].toString("z").toStdString();
// ignore missing/invalid settings
if ( (gpio >= 0) && (gpio < signed(TABLE_SZ)) && (ledindex >= 0) ){
_gpio_to_led[gpio] = ledindex;
_gpio_to_color[gpio] = ledcolor[0]; // 1st char of string
} else {
Warning( _log, "IGNORING gpio %d ledindex %d color %c", gpio,ledindex, ledcolor[0]);
}
}
}
return isInitOK;
}
JsonCpp to QTJson (Final Part) (#273) * Update CMakeLists.txt * Update Hyperion.h * Update LedDevice.h * Update LedDeviceFactory.h * Update Hyperion.cpp * Update LedString.cpp * Update JsonClientConnection.cpp * Update LedDeviceAdalight.cpp * Update LedDeviceAdalight.h * Update LedDeviceAPA102.cpp * Update LedDeviceAdalightApa102.h * Update LedDeviceAdalightApa102.cpp * Update LedDeviceAPA102.h * Update LedDeviceAtmo.cpp * Update LedDeviceAtmo.h * Update LedDeviceAtmoOrb.cpp * Update LedDeviceAtmoOrb.h * Update LedDeviceDMX.cpp * Update LedDeviceDMX.h * Update LedDeviceFactory.cpp * Update LedDeviceFadeCandy.cpp * Update LedDeviceFadeCandy.h * Update LedDeviceFile.cpp * Update LedDeviceFile.h * Update LedDeviceHyperionUsbasp.cpp * Update LedDeviceHyperionUsbasp.h * Update LedDeviceLightpack.cpp * Update LedDeviceLightpack.h * Update LedDeviceLpd6803.cpp * Update LedDeviceLpd6803.h * Update LedDeviceLpd8806.cpp * Update LedDeviceLpd8806.h * Update LedDeviceMultiLightpack.cpp * Update LedDeviceMultiLightpack.h * Update LedDeviceP9813.cpp * Update LedDeviceP9813.h * Update LedDevicePaintpack.cpp * Update LedDevicePaintpack.h * Update LedDevicePhilipsHue.cpp * Update LedDevicePhilipsHue.h * Update LedDevicePiBlaster.cpp * Update LedDevicePiBlaster.h * Update LedDeviceRawHID.cpp * Update LedDeviceRawHID.h * Update LedDeviceSedu.cpp * Update LedDeviceSedu.h * Update LedDeviceSk6812SPI.cpp * Update LedDeviceSk6812SPI.h * Update LedDeviceTinkerforge.cpp * Update LedDeviceTinkerforge.h * Update LedDeviceTpm2.cpp * Update LedDeviceTpm2.h * Update LedDeviceTpm2net.cpp * Update LedDeviceTpm2net.h * Update LedDeviceUdpE131.cpp * Update LedDeviceUdpE131.h * Update LedDeviceUdpH801.cpp * Update LedDeviceUdpH801.h * Update LedDeviceUdpRaw.cpp * Update LedDeviceUdpRaw.h * Update LedDeviceWs2801.cpp * Update LedDeviceWs2801.h * Update LedDeviceWS2812b.cpp * Update LedDeviceWS2812b.h * Update LedDeviceWs2812SPI.cpp * Update LedDeviceWs2812SPI.h * Update LedDeviceWS281x.cpp * Update LedDeviceWS281x.h * Update ProviderHID.cpp * Update ProviderHID.h * Update ProviderRs232.cpp * Update ProviderRs232.h * Update ProviderSpi.cpp * Update ProviderSpi.h * Update ProviderUdp.cpp * Update ProviderUdp.h * Update LedDevice.cpp * Update CMakeLists.txt * Update hyperiond.cpp * Update hyperiond.h * Update TestSpi.cpp * Delete AUTHORS * Delete CMakeLists.txt * Delete LICENSE * Delete json_batchallocator.h * Delete json_internalarray.inl * Delete json_internalmap.inl * Delete json_reader.cpp * Delete json_tool.h * Delete json_value.cpp * Delete json_valueiterator.inl * Delete json_writer.cpp * Delete sconscript * Delete autolink.h * Delete config.h * Delete features.h * Delete forwards.h * Delete json.h * Delete reader.h * Delete value.h * Delete writer.h
2016-10-13 21:59:58 +02:00
LedDevice* LedDevicePiBlaster::construct(const QJsonObject &deviceConfig)
{
return new LedDevicePiBlaster(deviceConfig);
}
int LedDevicePiBlaster::open()
{
Disentangle LedDevice/LinearColorSmoothing, Bug Fixes & Test support (#654) * Handle Exceptions in main & Pythoninit * Have SSDPDiscover generic again * Have SSDPDiscover generic again * Change Info- to Debug logs as technical service messages * Nanoleaf - When switched on, ensure UDP mode * Include SQL Database in Cross-Compile instructions * Fix Clazy (QT code checker) and clang Warnings * Stop LedDevice:write for disabled device * Nanoleaf: Fix uint printfs * NanoLeaf: Fix indents to tabs * NanoLeaf - Add debug verbosity switches * Device switchability support, FileDevice with timestamp support * Nanoleaf Light Panels now support External Control V2 * Enhance LedDeviceFile by Timestamp + fix readyness * Stop color stream, if LedDevice disabled * Nanoleaf - remove switchability * Fix MultiColorAdjustment, if led-range is greater lednum * Fix logging * LedFileDevice/LedDevice - add testing support * New "Led Test" effect * LedDeviceFile - Add chrono include + Allow Led rewrites for testing * Stabilize Effects for LedDevices where latchtime = 0 * Update LedDeviceFile, allow latchtime = 0 * Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates * Updates LedDeviceFile - Initialize via Open * Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions * Updates ProviderUDP - Remove throwing exceptions * Framebuffer - Use precise timer * TestSpi - Align to LedDevice updates * Pretty Print CrossCompileHowTo as markdown-file * Ensure that output is only written when LedDevice is ready * Align APA102 Device to new device staging * Logger - Remove clang warnings on extra semicolon * Devices SPI - Align to Device stages and methods * Fix cppcheck and clang findings * Add Code-Template for new Devices * Align devices to stages and methods, clean-up some code * Allow to reopen LedDevice without restart * Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes" * Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic * Expose LedDevice getLedCount and align signedness
2020-02-10 15:21:58 +01:00
int retval = -1;
QString errortext;
LED Device Features, Fixes and Refactoring (Resubmit PR855) (#875) * Refactor LedDevices - Initial version * Small renamings * Add WLED as own device * Lpd8806 Remove open() method * remove dependency on Qt 5.10 * Lpd8806 Remove open() method * Update WS281x * Update WS2812SPI * Add writeBlack for WLED powerOff * WLED remove extra bracket * Allow different Nanoleaf panel numbering sequence (Feature req.#827) * build(deps): bump websocket-extensions from 0.1.3 to 0.1.4 in /docs (#826) * Bumps [websocket-extensions](https://github.com/faye/websocket-extensions-node) from 0.1.3 to 0.1.4. - [Release notes](https://github.com/faye/websocket-extensions-node/releases) - [Changelog](https://github.com/faye/websocket-extensions-node/blob/master/CHANGELOG.md) - [Commits](https://github.com/faye/websocket-extensions-node/compare/0.1.3...0.1.4) * Fix typos * Nanoleaf clean-up * Yeelight support, generalize wizard elements * Update Yeelight to handle quota in music mode * Yeelight extend rage for extraTimeDarkness for testing * Clean-up - Add commentary, Remove development debug statements * Fix brightnessSwitchOffOnMinimum typo and default value * Yeelight support restoreOriginalState, additional Fixes * WLED - Remove UDP-Port, as it is not configurable * Fix merging issue * Remove QHostAddress::operator=(const QString&)' is deprecated * Windows compile errors and (Qt 5.15 deprecation) warnings * Fix order includes * LedDeviceFile Support Qt5.7 and greater * Windows compatibility and other Fixes * Fix Qt Version compatability * Rs232 - Resolve portname from unix /dev/ style, fix DMX sub-type support * Disable WLED Wizard Button (until Wizard is available) * Yeelight updates * Add wrong log-type as per #505 * Fixes and Clean-up after clang-tidy report * Fix udpe131 not enabled for generated CID * Change timer into dynamic for Qt Thread-Affinity * Hue clean-up and diyHue workaround * Updates after review feedback by m-seker * Add "chrono" includes
2020-07-12 20:27:56 +02:00
_isDeviceReady = false;
LED Device Features, Fixes and Refactoring (Resubmit PR855) (#875) * Refactor LedDevices - Initial version * Small renamings * Add WLED as own device * Lpd8806 Remove open() method * remove dependency on Qt 5.10 * Lpd8806 Remove open() method * Update WS281x * Update WS2812SPI * Add writeBlack for WLED powerOff * WLED remove extra bracket * Allow different Nanoleaf panel numbering sequence (Feature req.#827) * build(deps): bump websocket-extensions from 0.1.3 to 0.1.4 in /docs (#826) * Bumps [websocket-extensions](https://github.com/faye/websocket-extensions-node) from 0.1.3 to 0.1.4. - [Release notes](https://github.com/faye/websocket-extensions-node/releases) - [Changelog](https://github.com/faye/websocket-extensions-node/blob/master/CHANGELOG.md) - [Commits](https://github.com/faye/websocket-extensions-node/compare/0.1.3...0.1.4) * Fix typos * Nanoleaf clean-up * Yeelight support, generalize wizard elements * Update Yeelight to handle quota in music mode * Yeelight extend rage for extraTimeDarkness for testing * Clean-up - Add commentary, Remove development debug statements * Fix brightnessSwitchOffOnMinimum typo and default value * Yeelight support restoreOriginalState, additional Fixes * WLED - Remove UDP-Port, as it is not configurable * Fix merging issue * Remove QHostAddress::operator=(const QString&)' is deprecated * Windows compile errors and (Qt 5.15 deprecation) warnings * Fix order includes * LedDeviceFile Support Qt5.7 and greater * Windows compatibility and other Fixes * Fix Qt Version compatability * Rs232 - Resolve portname from unix /dev/ style, fix DMX sub-type support * Disable WLED Wizard Button (until Wizard is available) * Yeelight updates * Add wrong log-type as per #505 * Fixes and Clean-up after clang-tidy report * Fix udpe131 not enabled for generated CID * Change timer into dynamic for Qt Thread-Affinity * Hue clean-up and diyHue workaround * Updates after review feedback by m-seker * Add "chrono" includes
2020-07-12 20:27:56 +02:00
if (_fid != nullptr)
{
LED Device Features, Fixes and Refactoring (Resubmit PR855) (#875) * Refactor LedDevices - Initial version * Small renamings * Add WLED as own device * Lpd8806 Remove open() method * remove dependency on Qt 5.10 * Lpd8806 Remove open() method * Update WS281x * Update WS2812SPI * Add writeBlack for WLED powerOff * WLED remove extra bracket * Allow different Nanoleaf panel numbering sequence (Feature req.#827) * build(deps): bump websocket-extensions from 0.1.3 to 0.1.4 in /docs (#826) * Bumps [websocket-extensions](https://github.com/faye/websocket-extensions-node) from 0.1.3 to 0.1.4. - [Release notes](https://github.com/faye/websocket-extensions-node/releases) - [Changelog](https://github.com/faye/websocket-extensions-node/blob/master/CHANGELOG.md) - [Commits](https://github.com/faye/websocket-extensions-node/compare/0.1.3...0.1.4) * Fix typos * Nanoleaf clean-up * Yeelight support, generalize wizard elements * Update Yeelight to handle quota in music mode * Yeelight extend rage for extraTimeDarkness for testing * Clean-up - Add commentary, Remove development debug statements * Fix brightnessSwitchOffOnMinimum typo and default value * Yeelight support restoreOriginalState, additional Fixes * WLED - Remove UDP-Port, as it is not configurable * Fix merging issue * Remove QHostAddress::operator=(const QString&)' is deprecated * Windows compile errors and (Qt 5.15 deprecation) warnings * Fix order includes * LedDeviceFile Support Qt5.7 and greater * Windows compatibility and other Fixes * Fix Qt Version compatability * Rs232 - Resolve portname from unix /dev/ style, fix DMX sub-type support * Disable WLED Wizard Button (until Wizard is available) * Yeelight updates * Add wrong log-type as per #505 * Fixes and Clean-up after clang-tidy report * Fix udpe131 not enabled for generated CID * Change timer into dynamic for Qt Thread-Affinity * Hue clean-up and diyHue workaround * Updates after review feedback by m-seker * Add "chrono" includes
2020-07-12 20:27:56 +02:00
// The file pointer is already open
errortext = QString ("Device (%1) is already open.").arg(_deviceName);
}
else
{
if (!QFile::exists(_deviceName))
Disentangle LedDevice/LinearColorSmoothing, Bug Fixes & Test support (#654) * Handle Exceptions in main & Pythoninit * Have SSDPDiscover generic again * Have SSDPDiscover generic again * Change Info- to Debug logs as technical service messages * Nanoleaf - When switched on, ensure UDP mode * Include SQL Database in Cross-Compile instructions * Fix Clazy (QT code checker) and clang Warnings * Stop LedDevice:write for disabled device * Nanoleaf: Fix uint printfs * NanoLeaf: Fix indents to tabs * NanoLeaf - Add debug verbosity switches * Device switchability support, FileDevice with timestamp support * Nanoleaf Light Panels now support External Control V2 * Enhance LedDeviceFile by Timestamp + fix readyness * Stop color stream, if LedDevice disabled * Nanoleaf - remove switchability * Fix MultiColorAdjustment, if led-range is greater lednum * Fix logging * LedFileDevice/LedDevice - add testing support * New "Led Test" effect * LedDeviceFile - Add chrono include + Allow Led rewrites for testing * Stabilize Effects for LedDevices where latchtime = 0 * Update LedDeviceFile, allow latchtime = 0 * Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates * Updates LedDeviceFile - Initialize via Open * Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions * Updates ProviderUDP - Remove throwing exceptions * Framebuffer - Use precise timer * TestSpi - Align to LedDevice updates * Pretty Print CrossCompileHowTo as markdown-file * Ensure that output is only written when LedDevice is ready * Align APA102 Device to new device staging * Logger - Remove clang warnings on extra semicolon * Devices SPI - Align to Device stages and methods * Fix cppcheck and clang findings * Add Code-Template for new Devices * Align devices to stages and methods, clean-up some code * Allow to reopen LedDevice without restart * Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes" * Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic * Expose LedDevice getLedCount and align signedness
2020-02-10 15:21:58 +01:00
{
LED Device Features, Fixes and Refactoring (Resubmit PR855) (#875) * Refactor LedDevices - Initial version * Small renamings * Add WLED as own device * Lpd8806 Remove open() method * remove dependency on Qt 5.10 * Lpd8806 Remove open() method * Update WS281x * Update WS2812SPI * Add writeBlack for WLED powerOff * WLED remove extra bracket * Allow different Nanoleaf panel numbering sequence (Feature req.#827) * build(deps): bump websocket-extensions from 0.1.3 to 0.1.4 in /docs (#826) * Bumps [websocket-extensions](https://github.com/faye/websocket-extensions-node) from 0.1.3 to 0.1.4. - [Release notes](https://github.com/faye/websocket-extensions-node/releases) - [Changelog](https://github.com/faye/websocket-extensions-node/blob/master/CHANGELOG.md) - [Commits](https://github.com/faye/websocket-extensions-node/compare/0.1.3...0.1.4) * Fix typos * Nanoleaf clean-up * Yeelight support, generalize wizard elements * Update Yeelight to handle quota in music mode * Yeelight extend rage for extraTimeDarkness for testing * Clean-up - Add commentary, Remove development debug statements * Fix brightnessSwitchOffOnMinimum typo and default value * Yeelight support restoreOriginalState, additional Fixes * WLED - Remove UDP-Port, as it is not configurable * Fix merging issue * Remove QHostAddress::operator=(const QString&)' is deprecated * Windows compile errors and (Qt 5.15 deprecation) warnings * Fix order includes * LedDeviceFile Support Qt5.7 and greater * Windows compatibility and other Fixes * Fix Qt Version compatability * Rs232 - Resolve portname from unix /dev/ style, fix DMX sub-type support * Disable WLED Wizard Button (until Wizard is available) * Yeelight updates * Add wrong log-type as per #505 * Fixes and Clean-up after clang-tidy report * Fix udpe131 not enabled for generated CID * Change timer into dynamic for Qt Thread-Affinity * Hue clean-up and diyHue workaround * Updates after review feedback by m-seker * Add "chrono" includes
2020-07-12 20:27:56 +02:00
errortext = QString ("The device (%1) does not yet exist.").arg(_deviceName);
Disentangle LedDevice/LinearColorSmoothing, Bug Fixes & Test support (#654) * Handle Exceptions in main & Pythoninit * Have SSDPDiscover generic again * Have SSDPDiscover generic again * Change Info- to Debug logs as technical service messages * Nanoleaf - When switched on, ensure UDP mode * Include SQL Database in Cross-Compile instructions * Fix Clazy (QT code checker) and clang Warnings * Stop LedDevice:write for disabled device * Nanoleaf: Fix uint printfs * NanoLeaf: Fix indents to tabs * NanoLeaf - Add debug verbosity switches * Device switchability support, FileDevice with timestamp support * Nanoleaf Light Panels now support External Control V2 * Enhance LedDeviceFile by Timestamp + fix readyness * Stop color stream, if LedDevice disabled * Nanoleaf - remove switchability * Fix MultiColorAdjustment, if led-range is greater lednum * Fix logging * LedFileDevice/LedDevice - add testing support * New "Led Test" effect * LedDeviceFile - Add chrono include + Allow Led rewrites for testing * Stabilize Effects for LedDevices where latchtime = 0 * Update LedDeviceFile, allow latchtime = 0 * Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates * Updates LedDeviceFile - Initialize via Open * Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions * Updates ProviderUDP - Remove throwing exceptions * Framebuffer - Use precise timer * TestSpi - Align to LedDevice updates * Pretty Print CrossCompileHowTo as markdown-file * Ensure that output is only written when LedDevice is ready * Align APA102 Device to new device staging * Logger - Remove clang warnings on extra semicolon * Devices SPI - Align to Device stages and methods * Fix cppcheck and clang findings * Add Code-Template for new Devices * Align devices to stages and methods, clean-up some code * Allow to reopen LedDevice without restart * Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes" * Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic * Expose LedDevice getLedCount and align signedness
2020-02-10 15:21:58 +01:00
}
else
{
LED Device Features, Fixes and Refactoring (Resubmit PR855) (#875) * Refactor LedDevices - Initial version * Small renamings * Add WLED as own device * Lpd8806 Remove open() method * remove dependency on Qt 5.10 * Lpd8806 Remove open() method * Update WS281x * Update WS2812SPI * Add writeBlack for WLED powerOff * WLED remove extra bracket * Allow different Nanoleaf panel numbering sequence (Feature req.#827) * build(deps): bump websocket-extensions from 0.1.3 to 0.1.4 in /docs (#826) * Bumps [websocket-extensions](https://github.com/faye/websocket-extensions-node) from 0.1.3 to 0.1.4. - [Release notes](https://github.com/faye/websocket-extensions-node/releases) - [Changelog](https://github.com/faye/websocket-extensions-node/blob/master/CHANGELOG.md) - [Commits](https://github.com/faye/websocket-extensions-node/compare/0.1.3...0.1.4) * Fix typos * Nanoleaf clean-up * Yeelight support, generalize wizard elements * Update Yeelight to handle quota in music mode * Yeelight extend rage for extraTimeDarkness for testing * Clean-up - Add commentary, Remove development debug statements * Fix brightnessSwitchOffOnMinimum typo and default value * Yeelight support restoreOriginalState, additional Fixes * WLED - Remove UDP-Port, as it is not configurable * Fix merging issue * Remove QHostAddress::operator=(const QString&)' is deprecated * Windows compile errors and (Qt 5.15 deprecation) warnings * Fix order includes * LedDeviceFile Support Qt5.7 and greater * Windows compatibility and other Fixes * Fix Qt Version compatability * Rs232 - Resolve portname from unix /dev/ style, fix DMX sub-type support * Disable WLED Wizard Button (until Wizard is available) * Yeelight updates * Add wrong log-type as per #505 * Fixes and Clean-up after clang-tidy report * Fix udpe131 not enabled for generated CID * Change timer into dynamic for Qt Thread-Affinity * Hue clean-up and diyHue workaround * Updates after review feedback by m-seker * Add "chrono" includes
2020-07-12 20:27:56 +02:00
_fid = fopen(QSTRING_CSTR(_deviceName), "w");
if (_fid == nullptr)
Disentangle LedDevice/LinearColorSmoothing, Bug Fixes & Test support (#654) * Handle Exceptions in main & Pythoninit * Have SSDPDiscover generic again * Have SSDPDiscover generic again * Change Info- to Debug logs as technical service messages * Nanoleaf - When switched on, ensure UDP mode * Include SQL Database in Cross-Compile instructions * Fix Clazy (QT code checker) and clang Warnings * Stop LedDevice:write for disabled device * Nanoleaf: Fix uint printfs * NanoLeaf: Fix indents to tabs * NanoLeaf - Add debug verbosity switches * Device switchability support, FileDevice with timestamp support * Nanoleaf Light Panels now support External Control V2 * Enhance LedDeviceFile by Timestamp + fix readyness * Stop color stream, if LedDevice disabled * Nanoleaf - remove switchability * Fix MultiColorAdjustment, if led-range is greater lednum * Fix logging * LedFileDevice/LedDevice - add testing support * New "Led Test" effect * LedDeviceFile - Add chrono include + Allow Led rewrites for testing * Stabilize Effects for LedDevices where latchtime = 0 * Update LedDeviceFile, allow latchtime = 0 * Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates * Updates LedDeviceFile - Initialize via Open * Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions * Updates ProviderUDP - Remove throwing exceptions * Framebuffer - Use precise timer * TestSpi - Align to LedDevice updates * Pretty Print CrossCompileHowTo as markdown-file * Ensure that output is only written when LedDevice is ready * Align APA102 Device to new device staging * Logger - Remove clang warnings on extra semicolon * Devices SPI - Align to Device stages and methods * Fix cppcheck and clang findings * Add Code-Template for new Devices * Align devices to stages and methods, clean-up some code * Allow to reopen LedDevice without restart * Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes" * Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic * Expose LedDevice getLedCount and align signedness
2020-02-10 15:21:58 +01:00
{
LED Device Features, Fixes and Refactoring (Resubmit PR855) (#875) * Refactor LedDevices - Initial version * Small renamings * Add WLED as own device * Lpd8806 Remove open() method * remove dependency on Qt 5.10 * Lpd8806 Remove open() method * Update WS281x * Update WS2812SPI * Add writeBlack for WLED powerOff * WLED remove extra bracket * Allow different Nanoleaf panel numbering sequence (Feature req.#827) * build(deps): bump websocket-extensions from 0.1.3 to 0.1.4 in /docs (#826) * Bumps [websocket-extensions](https://github.com/faye/websocket-extensions-node) from 0.1.3 to 0.1.4. - [Release notes](https://github.com/faye/websocket-extensions-node/releases) - [Changelog](https://github.com/faye/websocket-extensions-node/blob/master/CHANGELOG.md) - [Commits](https://github.com/faye/websocket-extensions-node/compare/0.1.3...0.1.4) * Fix typos * Nanoleaf clean-up * Yeelight support, generalize wizard elements * Update Yeelight to handle quota in music mode * Yeelight extend rage for extraTimeDarkness for testing * Clean-up - Add commentary, Remove development debug statements * Fix brightnessSwitchOffOnMinimum typo and default value * Yeelight support restoreOriginalState, additional Fixes * WLED - Remove UDP-Port, as it is not configurable * Fix merging issue * Remove QHostAddress::operator=(const QString&)' is deprecated * Windows compile errors and (Qt 5.15 deprecation) warnings * Fix order includes * LedDeviceFile Support Qt5.7 and greater * Windows compatibility and other Fixes * Fix Qt Version compatability * Rs232 - Resolve portname from unix /dev/ style, fix DMX sub-type support * Disable WLED Wizard Button (until Wizard is available) * Yeelight updates * Add wrong log-type as per #505 * Fixes and Clean-up after clang-tidy report * Fix udpe131 not enabled for generated CID * Change timer into dynamic for Qt Thread-Affinity * Hue clean-up and diyHue workaround * Updates after review feedback by m-seker * Add "chrono" includes
2020-07-12 20:27:56 +02:00
errortext = QString ("Failed to open device (%1). Error message: %2").arg(_deviceName, strerror(errno));
Disentangle LedDevice/LinearColorSmoothing, Bug Fixes & Test support (#654) * Handle Exceptions in main & Pythoninit * Have SSDPDiscover generic again * Have SSDPDiscover generic again * Change Info- to Debug logs as technical service messages * Nanoleaf - When switched on, ensure UDP mode * Include SQL Database in Cross-Compile instructions * Fix Clazy (QT code checker) and clang Warnings * Stop LedDevice:write for disabled device * Nanoleaf: Fix uint printfs * NanoLeaf: Fix indents to tabs * NanoLeaf - Add debug verbosity switches * Device switchability support, FileDevice with timestamp support * Nanoleaf Light Panels now support External Control V2 * Enhance LedDeviceFile by Timestamp + fix readyness * Stop color stream, if LedDevice disabled * Nanoleaf - remove switchability * Fix MultiColorAdjustment, if led-range is greater lednum * Fix logging * LedFileDevice/LedDevice - add testing support * New "Led Test" effect * LedDeviceFile - Add chrono include + Allow Led rewrites for testing * Stabilize Effects for LedDevices where latchtime = 0 * Update LedDeviceFile, allow latchtime = 0 * Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates * Updates LedDeviceFile - Initialize via Open * Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions * Updates ProviderUDP - Remove throwing exceptions * Framebuffer - Use precise timer * TestSpi - Align to LedDevice updates * Pretty Print CrossCompileHowTo as markdown-file * Ensure that output is only written when LedDevice is ready * Align APA102 Device to new device staging * Logger - Remove clang warnings on extra semicolon * Devices SPI - Align to Device stages and methods * Fix cppcheck and clang findings * Add Code-Template for new Devices * Align devices to stages and methods, clean-up some code * Allow to reopen LedDevice without restart * Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes" * Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic * Expose LedDevice getLedCount and align signedness
2020-02-10 15:21:58 +01:00
}
else
{
LED Device Features, Fixes and Refactoring (Resubmit PR855) (#875) * Refactor LedDevices - Initial version * Small renamings * Add WLED as own device * Lpd8806 Remove open() method * remove dependency on Qt 5.10 * Lpd8806 Remove open() method * Update WS281x * Update WS2812SPI * Add writeBlack for WLED powerOff * WLED remove extra bracket * Allow different Nanoleaf panel numbering sequence (Feature req.#827) * build(deps): bump websocket-extensions from 0.1.3 to 0.1.4 in /docs (#826) * Bumps [websocket-extensions](https://github.com/faye/websocket-extensions-node) from 0.1.3 to 0.1.4. - [Release notes](https://github.com/faye/websocket-extensions-node/releases) - [Changelog](https://github.com/faye/websocket-extensions-node/blob/master/CHANGELOG.md) - [Commits](https://github.com/faye/websocket-extensions-node/compare/0.1.3...0.1.4) * Fix typos * Nanoleaf clean-up * Yeelight support, generalize wizard elements * Update Yeelight to handle quota in music mode * Yeelight extend rage for extraTimeDarkness for testing * Clean-up - Add commentary, Remove development debug statements * Fix brightnessSwitchOffOnMinimum typo and default value * Yeelight support restoreOriginalState, additional Fixes * WLED - Remove UDP-Port, as it is not configurable * Fix merging issue * Remove QHostAddress::operator=(const QString&)' is deprecated * Windows compile errors and (Qt 5.15 deprecation) warnings * Fix order includes * LedDeviceFile Support Qt5.7 and greater * Windows compatibility and other Fixes * Fix Qt Version compatability * Rs232 - Resolve portname from unix /dev/ style, fix DMX sub-type support * Disable WLED Wizard Button (until Wizard is available) * Yeelight updates * Add wrong log-type as per #505 * Fixes and Clean-up after clang-tidy report * Fix udpe131 not enabled for generated CID * Change timer into dynamic for Qt Thread-Affinity * Hue clean-up and diyHue workaround * Updates after review feedback by m-seker * Add "chrono" includes
2020-07-12 20:27:56 +02:00
Info( _log, "Connected to device(%s)", QSTRING_CSTR(_deviceName));
// Everything is OK, device is ready
_isDeviceReady = true;
retval = 0;
Disentangle LedDevice/LinearColorSmoothing, Bug Fixes & Test support (#654) * Handle Exceptions in main & Pythoninit * Have SSDPDiscover generic again * Have SSDPDiscover generic again * Change Info- to Debug logs as technical service messages * Nanoleaf - When switched on, ensure UDP mode * Include SQL Database in Cross-Compile instructions * Fix Clazy (QT code checker) and clang Warnings * Stop LedDevice:write for disabled device * Nanoleaf: Fix uint printfs * NanoLeaf: Fix indents to tabs * NanoLeaf - Add debug verbosity switches * Device switchability support, FileDevice with timestamp support * Nanoleaf Light Panels now support External Control V2 * Enhance LedDeviceFile by Timestamp + fix readyness * Stop color stream, if LedDevice disabled * Nanoleaf - remove switchability * Fix MultiColorAdjustment, if led-range is greater lednum * Fix logging * LedFileDevice/LedDevice - add testing support * New "Led Test" effect * LedDeviceFile - Add chrono include + Allow Led rewrites for testing * Stabilize Effects for LedDevices where latchtime = 0 * Update LedDeviceFile, allow latchtime = 0 * Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates * Updates LedDeviceFile - Initialize via Open * Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions * Updates ProviderUDP - Remove throwing exceptions * Framebuffer - Use precise timer * TestSpi - Align to LedDevice updates * Pretty Print CrossCompileHowTo as markdown-file * Ensure that output is only written when LedDevice is ready * Align APA102 Device to new device staging * Logger - Remove clang warnings on extra semicolon * Devices SPI - Align to Device stages and methods * Fix cppcheck and clang findings * Add Code-Template for new Devices * Align devices to stages and methods, clean-up some code * Allow to reopen LedDevice without restart * Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes" * Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic * Expose LedDevice getLedCount and align signedness
2020-02-10 15:21:58 +01:00
}
}
LED Device Features, Fixes and Refactoring (Resubmit PR855) (#875) * Refactor LedDevices - Initial version * Small renamings * Add WLED as own device * Lpd8806 Remove open() method * remove dependency on Qt 5.10 * Lpd8806 Remove open() method * Update WS281x * Update WS2812SPI * Add writeBlack for WLED powerOff * WLED remove extra bracket * Allow different Nanoleaf panel numbering sequence (Feature req.#827) * build(deps): bump websocket-extensions from 0.1.3 to 0.1.4 in /docs (#826) * Bumps [websocket-extensions](https://github.com/faye/websocket-extensions-node) from 0.1.3 to 0.1.4. - [Release notes](https://github.com/faye/websocket-extensions-node/releases) - [Changelog](https://github.com/faye/websocket-extensions-node/blob/master/CHANGELOG.md) - [Commits](https://github.com/faye/websocket-extensions-node/compare/0.1.3...0.1.4) * Fix typos * Nanoleaf clean-up * Yeelight support, generalize wizard elements * Update Yeelight to handle quota in music mode * Yeelight extend rage for extraTimeDarkness for testing * Clean-up - Add commentary, Remove development debug statements * Fix brightnessSwitchOffOnMinimum typo and default value * Yeelight support restoreOriginalState, additional Fixes * WLED - Remove UDP-Port, as it is not configurable * Fix merging issue * Remove QHostAddress::operator=(const QString&)' is deprecated * Windows compile errors and (Qt 5.15 deprecation) warnings * Fix order includes * LedDeviceFile Support Qt5.7 and greater * Windows compatibility and other Fixes * Fix Qt Version compatability * Rs232 - Resolve portname from unix /dev/ style, fix DMX sub-type support * Disable WLED Wizard Button (until Wizard is available) * Yeelight updates * Add wrong log-type as per #505 * Fixes and Clean-up after clang-tidy report * Fix udpe131 not enabled for generated CID * Change timer into dynamic for Qt Thread-Affinity * Hue clean-up and diyHue workaround * Updates after review feedback by m-seker * Add "chrono" includes
2020-07-12 20:27:56 +02:00
}
LED Device Features, Fixes and Refactoring (Resubmit PR855) (#875) * Refactor LedDevices - Initial version * Small renamings * Add WLED as own device * Lpd8806 Remove open() method * remove dependency on Qt 5.10 * Lpd8806 Remove open() method * Update WS281x * Update WS2812SPI * Add writeBlack for WLED powerOff * WLED remove extra bracket * Allow different Nanoleaf panel numbering sequence (Feature req.#827) * build(deps): bump websocket-extensions from 0.1.3 to 0.1.4 in /docs (#826) * Bumps [websocket-extensions](https://github.com/faye/websocket-extensions-node) from 0.1.3 to 0.1.4. - [Release notes](https://github.com/faye/websocket-extensions-node/releases) - [Changelog](https://github.com/faye/websocket-extensions-node/blob/master/CHANGELOG.md) - [Commits](https://github.com/faye/websocket-extensions-node/compare/0.1.3...0.1.4) * Fix typos * Nanoleaf clean-up * Yeelight support, generalize wizard elements * Update Yeelight to handle quota in music mode * Yeelight extend rage for extraTimeDarkness for testing * Clean-up - Add commentary, Remove development debug statements * Fix brightnessSwitchOffOnMinimum typo and default value * Yeelight support restoreOriginalState, additional Fixes * WLED - Remove UDP-Port, as it is not configurable * Fix merging issue * Remove QHostAddress::operator=(const QString&)' is deprecated * Windows compile errors and (Qt 5.15 deprecation) warnings * Fix order includes * LedDeviceFile Support Qt5.7 and greater * Windows compatibility and other Fixes * Fix Qt Version compatability * Rs232 - Resolve portname from unix /dev/ style, fix DMX sub-type support * Disable WLED Wizard Button (until Wizard is available) * Yeelight updates * Add wrong log-type as per #505 * Fixes and Clean-up after clang-tidy report * Fix udpe131 not enabled for generated CID * Change timer into dynamic for Qt Thread-Affinity * Hue clean-up and diyHue workaround * Updates after review feedback by m-seker * Add "chrono" includes
2020-07-12 20:27:56 +02:00
// On error/exceptions, set LedDevice in error
if ( retval < 0 )
{
this->setInError( errortext );
Disentangle LedDevice/LinearColorSmoothing, Bug Fixes & Test support (#654) * Handle Exceptions in main & Pythoninit * Have SSDPDiscover generic again * Have SSDPDiscover generic again * Change Info- to Debug logs as technical service messages * Nanoleaf - When switched on, ensure UDP mode * Include SQL Database in Cross-Compile instructions * Fix Clazy (QT code checker) and clang Warnings * Stop LedDevice:write for disabled device * Nanoleaf: Fix uint printfs * NanoLeaf: Fix indents to tabs * NanoLeaf - Add debug verbosity switches * Device switchability support, FileDevice with timestamp support * Nanoleaf Light Panels now support External Control V2 * Enhance LedDeviceFile by Timestamp + fix readyness * Stop color stream, if LedDevice disabled * Nanoleaf - remove switchability * Fix MultiColorAdjustment, if led-range is greater lednum * Fix logging * LedFileDevice/LedDevice - add testing support * New "Led Test" effect * LedDeviceFile - Add chrono include + Allow Led rewrites for testing * Stabilize Effects for LedDevices where latchtime = 0 * Update LedDeviceFile, allow latchtime = 0 * Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates * Updates LedDeviceFile - Initialize via Open * Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions * Updates ProviderUDP - Remove throwing exceptions * Framebuffer - Use precise timer * TestSpi - Align to LedDevice updates * Pretty Print CrossCompileHowTo as markdown-file * Ensure that output is only written when LedDevice is ready * Align APA102 Device to new device staging * Logger - Remove clang warnings on extra semicolon * Devices SPI - Align to Device stages and methods * Fix cppcheck and clang findings * Add Code-Template for new Devices * Align devices to stages and methods, clean-up some code * Allow to reopen LedDevice without restart * Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes" * Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic * Expose LedDevice getLedCount and align signedness
2020-02-10 15:21:58 +01:00
}
return retval;
}
LED Device Features, Fixes and Refactoring (Resubmit PR855) (#875) * Refactor LedDevices - Initial version * Small renamings * Add WLED as own device * Lpd8806 Remove open() method * remove dependency on Qt 5.10 * Lpd8806 Remove open() method * Update WS281x * Update WS2812SPI * Add writeBlack for WLED powerOff * WLED remove extra bracket * Allow different Nanoleaf panel numbering sequence (Feature req.#827) * build(deps): bump websocket-extensions from 0.1.3 to 0.1.4 in /docs (#826) * Bumps [websocket-extensions](https://github.com/faye/websocket-extensions-node) from 0.1.3 to 0.1.4. - [Release notes](https://github.com/faye/websocket-extensions-node/releases) - [Changelog](https://github.com/faye/websocket-extensions-node/blob/master/CHANGELOG.md) - [Commits](https://github.com/faye/websocket-extensions-node/compare/0.1.3...0.1.4) * Fix typos * Nanoleaf clean-up * Yeelight support, generalize wizard elements * Update Yeelight to handle quota in music mode * Yeelight extend rage for extraTimeDarkness for testing * Clean-up - Add commentary, Remove development debug statements * Fix brightnessSwitchOffOnMinimum typo and default value * Yeelight support restoreOriginalState, additional Fixes * WLED - Remove UDP-Port, as it is not configurable * Fix merging issue * Remove QHostAddress::operator=(const QString&)' is deprecated * Windows compile errors and (Qt 5.15 deprecation) warnings * Fix order includes * LedDeviceFile Support Qt5.7 and greater * Windows compatibility and other Fixes * Fix Qt Version compatability * Rs232 - Resolve portname from unix /dev/ style, fix DMX sub-type support * Disable WLED Wizard Button (until Wizard is available) * Yeelight updates * Add wrong log-type as per #505 * Fixes and Clean-up after clang-tidy report * Fix udpe131 not enabled for generated CID * Change timer into dynamic for Qt Thread-Affinity * Hue clean-up and diyHue workaround * Updates after review feedback by m-seker * Add "chrono" includes
2020-07-12 20:27:56 +02:00
int LedDevicePiBlaster::close()
Disentangle LedDevice/LinearColorSmoothing, Bug Fixes & Test support (#654) * Handle Exceptions in main & Pythoninit * Have SSDPDiscover generic again * Have SSDPDiscover generic again * Change Info- to Debug logs as technical service messages * Nanoleaf - When switched on, ensure UDP mode * Include SQL Database in Cross-Compile instructions * Fix Clazy (QT code checker) and clang Warnings * Stop LedDevice:write for disabled device * Nanoleaf: Fix uint printfs * NanoLeaf: Fix indents to tabs * NanoLeaf - Add debug verbosity switches * Device switchability support, FileDevice with timestamp support * Nanoleaf Light Panels now support External Control V2 * Enhance LedDeviceFile by Timestamp + fix readyness * Stop color stream, if LedDevice disabled * Nanoleaf - remove switchability * Fix MultiColorAdjustment, if led-range is greater lednum * Fix logging * LedFileDevice/LedDevice - add testing support * New "Led Test" effect * LedDeviceFile - Add chrono include + Allow Led rewrites for testing * Stabilize Effects for LedDevices where latchtime = 0 * Update LedDeviceFile, allow latchtime = 0 * Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates * Updates LedDeviceFile - Initialize via Open * Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions * Updates ProviderUDP - Remove throwing exceptions * Framebuffer - Use precise timer * TestSpi - Align to LedDevice updates * Pretty Print CrossCompileHowTo as markdown-file * Ensure that output is only written when LedDevice is ready * Align APA102 Device to new device staging * Logger - Remove clang warnings on extra semicolon * Devices SPI - Align to Device stages and methods * Fix cppcheck and clang findings * Add Code-Template for new Devices * Align devices to stages and methods, clean-up some code * Allow to reopen LedDevice without restart * Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes" * Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic * Expose LedDevice getLedCount and align signedness
2020-02-10 15:21:58 +01:00
{
LED Device Features, Fixes and Refactoring (Resubmit PR855) (#875) * Refactor LedDevices - Initial version * Small renamings * Add WLED as own device * Lpd8806 Remove open() method * remove dependency on Qt 5.10 * Lpd8806 Remove open() method * Update WS281x * Update WS2812SPI * Add writeBlack for WLED powerOff * WLED remove extra bracket * Allow different Nanoleaf panel numbering sequence (Feature req.#827) * build(deps): bump websocket-extensions from 0.1.3 to 0.1.4 in /docs (#826) * Bumps [websocket-extensions](https://github.com/faye/websocket-extensions-node) from 0.1.3 to 0.1.4. - [Release notes](https://github.com/faye/websocket-extensions-node/releases) - [Changelog](https://github.com/faye/websocket-extensions-node/blob/master/CHANGELOG.md) - [Commits](https://github.com/faye/websocket-extensions-node/compare/0.1.3...0.1.4) * Fix typos * Nanoleaf clean-up * Yeelight support, generalize wizard elements * Update Yeelight to handle quota in music mode * Yeelight extend rage for extraTimeDarkness for testing * Clean-up - Add commentary, Remove development debug statements * Fix brightnessSwitchOffOnMinimum typo and default value * Yeelight support restoreOriginalState, additional Fixes * WLED - Remove UDP-Port, as it is not configurable * Fix merging issue * Remove QHostAddress::operator=(const QString&)' is deprecated * Windows compile errors and (Qt 5.15 deprecation) warnings * Fix order includes * LedDeviceFile Support Qt5.7 and greater * Windows compatibility and other Fixes * Fix Qt Version compatability * Rs232 - Resolve portname from unix /dev/ style, fix DMX sub-type support * Disable WLED Wizard Button (until Wizard is available) * Yeelight updates * Add wrong log-type as per #505 * Fixes and Clean-up after clang-tidy report * Fix udpe131 not enabled for generated CID * Change timer into dynamic for Qt Thread-Affinity * Hue clean-up and diyHue workaround * Updates after review feedback by m-seker * Add "chrono" includes
2020-07-12 20:27:56 +02:00
int retval = 0;
_isDeviceReady = false;
Disentangle LedDevice/LinearColorSmoothing, Bug Fixes & Test support (#654) * Handle Exceptions in main & Pythoninit * Have SSDPDiscover generic again * Have SSDPDiscover generic again * Change Info- to Debug logs as technical service messages * Nanoleaf - When switched on, ensure UDP mode * Include SQL Database in Cross-Compile instructions * Fix Clazy (QT code checker) and clang Warnings * Stop LedDevice:write for disabled device * Nanoleaf: Fix uint printfs * NanoLeaf: Fix indents to tabs * NanoLeaf - Add debug verbosity switches * Device switchability support, FileDevice with timestamp support * Nanoleaf Light Panels now support External Control V2 * Enhance LedDeviceFile by Timestamp + fix readyness * Stop color stream, if LedDevice disabled * Nanoleaf - remove switchability * Fix MultiColorAdjustment, if led-range is greater lednum * Fix logging * LedFileDevice/LedDevice - add testing support * New "Led Test" effect * LedDeviceFile - Add chrono include + Allow Led rewrites for testing * Stabilize Effects for LedDevices where latchtime = 0 * Update LedDeviceFile, allow latchtime = 0 * Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates * Updates LedDeviceFile - Initialize via Open * Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions * Updates ProviderUDP - Remove throwing exceptions * Framebuffer - Use precise timer * TestSpi - Align to LedDevice updates * Pretty Print CrossCompileHowTo as markdown-file * Ensure that output is only written when LedDevice is ready * Align APA102 Device to new device staging * Logger - Remove clang warnings on extra semicolon * Devices SPI - Align to Device stages and methods * Fix cppcheck and clang findings * Add Code-Template for new Devices * Align devices to stages and methods, clean-up some code * Allow to reopen LedDevice without restart * Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes" * Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic * Expose LedDevice getLedCount and align signedness
2020-02-10 15:21:58 +01:00
LED Device Features, Fixes and Refactoring (Resubmit PR855) (#875) * Refactor LedDevices - Initial version * Small renamings * Add WLED as own device * Lpd8806 Remove open() method * remove dependency on Qt 5.10 * Lpd8806 Remove open() method * Update WS281x * Update WS2812SPI * Add writeBlack for WLED powerOff * WLED remove extra bracket * Allow different Nanoleaf panel numbering sequence (Feature req.#827) * build(deps): bump websocket-extensions from 0.1.3 to 0.1.4 in /docs (#826) * Bumps [websocket-extensions](https://github.com/faye/websocket-extensions-node) from 0.1.3 to 0.1.4. - [Release notes](https://github.com/faye/websocket-extensions-node/releases) - [Changelog](https://github.com/faye/websocket-extensions-node/blob/master/CHANGELOG.md) - [Commits](https://github.com/faye/websocket-extensions-node/compare/0.1.3...0.1.4) * Fix typos * Nanoleaf clean-up * Yeelight support, generalize wizard elements * Update Yeelight to handle quota in music mode * Yeelight extend rage for extraTimeDarkness for testing * Clean-up - Add commentary, Remove development debug statements * Fix brightnessSwitchOffOnMinimum typo and default value * Yeelight support restoreOriginalState, additional Fixes * WLED - Remove UDP-Port, as it is not configurable * Fix merging issue * Remove QHostAddress::operator=(const QString&)' is deprecated * Windows compile errors and (Qt 5.15 deprecation) warnings * Fix order includes * LedDeviceFile Support Qt5.7 and greater * Windows compatibility and other Fixes * Fix Qt Version compatability * Rs232 - Resolve portname from unix /dev/ style, fix DMX sub-type support * Disable WLED Wizard Button (until Wizard is available) * Yeelight updates * Add wrong log-type as per #505 * Fixes and Clean-up after clang-tidy report * Fix udpe131 not enabled for generated CID * Change timer into dynamic for Qt Thread-Affinity * Hue clean-up and diyHue workaround * Updates after review feedback by m-seker * Add "chrono" includes
2020-07-12 20:27:56 +02:00
// Test, if device requires closing
Disentangle LedDevice/LinearColorSmoothing, Bug Fixes & Test support (#654) * Handle Exceptions in main & Pythoninit * Have SSDPDiscover generic again * Have SSDPDiscover generic again * Change Info- to Debug logs as technical service messages * Nanoleaf - When switched on, ensure UDP mode * Include SQL Database in Cross-Compile instructions * Fix Clazy (QT code checker) and clang Warnings * Stop LedDevice:write for disabled device * Nanoleaf: Fix uint printfs * NanoLeaf: Fix indents to tabs * NanoLeaf - Add debug verbosity switches * Device switchability support, FileDevice with timestamp support * Nanoleaf Light Panels now support External Control V2 * Enhance LedDeviceFile by Timestamp + fix readyness * Stop color stream, if LedDevice disabled * Nanoleaf - remove switchability * Fix MultiColorAdjustment, if led-range is greater lednum * Fix logging * LedFileDevice/LedDevice - add testing support * New "Led Test" effect * LedDeviceFile - Add chrono include + Allow Led rewrites for testing * Stabilize Effects for LedDevices where latchtime = 0 * Update LedDeviceFile, allow latchtime = 0 * Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates * Updates LedDeviceFile - Initialize via Open * Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions * Updates ProviderUDP - Remove throwing exceptions * Framebuffer - Use precise timer * TestSpi - Align to LedDevice updates * Pretty Print CrossCompileHowTo as markdown-file * Ensure that output is only written when LedDevice is ready * Align APA102 Device to new device staging * Logger - Remove clang warnings on extra semicolon * Devices SPI - Align to Device stages and methods * Fix cppcheck and clang findings * Add Code-Template for new Devices * Align devices to stages and methods, clean-up some code * Allow to reopen LedDevice without restart * Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes" * Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic * Expose LedDevice getLedCount and align signedness
2020-02-10 15:21:58 +01:00
if (_fid != nullptr)
{
fclose(_fid);
_fid = nullptr;
}
LED Device Features, Fixes and Refactoring (Resubmit PR855) (#875) * Refactor LedDevices - Initial version * Small renamings * Add WLED as own device * Lpd8806 Remove open() method * remove dependency on Qt 5.10 * Lpd8806 Remove open() method * Update WS281x * Update WS2812SPI * Add writeBlack for WLED powerOff * WLED remove extra bracket * Allow different Nanoleaf panel numbering sequence (Feature req.#827) * build(deps): bump websocket-extensions from 0.1.3 to 0.1.4 in /docs (#826) * Bumps [websocket-extensions](https://github.com/faye/websocket-extensions-node) from 0.1.3 to 0.1.4. - [Release notes](https://github.com/faye/websocket-extensions-node/releases) - [Changelog](https://github.com/faye/websocket-extensions-node/blob/master/CHANGELOG.md) - [Commits](https://github.com/faye/websocket-extensions-node/compare/0.1.3...0.1.4) * Fix typos * Nanoleaf clean-up * Yeelight support, generalize wizard elements * Update Yeelight to handle quota in music mode * Yeelight extend rage for extraTimeDarkness for testing * Clean-up - Add commentary, Remove development debug statements * Fix brightnessSwitchOffOnMinimum typo and default value * Yeelight support restoreOriginalState, additional Fixes * WLED - Remove UDP-Port, as it is not configurable * Fix merging issue * Remove QHostAddress::operator=(const QString&)' is deprecated * Windows compile errors and (Qt 5.15 deprecation) warnings * Fix order includes * LedDeviceFile Support Qt5.7 and greater * Windows compatibility and other Fixes * Fix Qt Version compatability * Rs232 - Resolve portname from unix /dev/ style, fix DMX sub-type support * Disable WLED Wizard Button (until Wizard is available) * Yeelight updates * Add wrong log-type as per #505 * Fixes and Clean-up after clang-tidy report * Fix udpe131 not enabled for generated CID * Change timer into dynamic for Qt Thread-Affinity * Hue clean-up and diyHue workaround * Updates after review feedback by m-seker * Add "chrono" includes
2020-07-12 20:27:56 +02:00
return retval;
}
Disentangle LedDevice/LinearColorSmoothing, Bug Fixes & Test support (#654) * Handle Exceptions in main & Pythoninit * Have SSDPDiscover generic again * Have SSDPDiscover generic again * Change Info- to Debug logs as technical service messages * Nanoleaf - When switched on, ensure UDP mode * Include SQL Database in Cross-Compile instructions * Fix Clazy (QT code checker) and clang Warnings * Stop LedDevice:write for disabled device * Nanoleaf: Fix uint printfs * NanoLeaf: Fix indents to tabs * NanoLeaf - Add debug verbosity switches * Device switchability support, FileDevice with timestamp support * Nanoleaf Light Panels now support External Control V2 * Enhance LedDeviceFile by Timestamp + fix readyness * Stop color stream, if LedDevice disabled * Nanoleaf - remove switchability * Fix MultiColorAdjustment, if led-range is greater lednum * Fix logging * LedFileDevice/LedDevice - add testing support * New "Led Test" effect * LedDeviceFile - Add chrono include + Allow Led rewrites for testing * Stabilize Effects for LedDevices where latchtime = 0 * Update LedDeviceFile, allow latchtime = 0 * Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates * Updates LedDeviceFile - Initialize via Open * Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions * Updates ProviderUDP - Remove throwing exceptions * Framebuffer - Use precise timer * TestSpi - Align to LedDevice updates * Pretty Print CrossCompileHowTo as markdown-file * Ensure that output is only written when LedDevice is ready * Align APA102 Device to new device staging * Logger - Remove clang warnings on extra semicolon * Devices SPI - Align to Device stages and methods * Fix cppcheck and clang findings * Add Code-Template for new Devices * Align devices to stages and methods, clean-up some code * Allow to reopen LedDevice without restart * Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes" * Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic * Expose LedDevice getLedCount and align signedness
2020-02-10 15:21:58 +01:00
int LedDevicePiBlaster::write(const std::vector<ColorRgb> & ledValues)
{
// Attempt to open if not yet opened
if (_fid == nullptr && open() < 0)
{
return -1;
}
Piblaster fix (#614) * Removed -HUP so the default -TERM signal is sent instead. - hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config Changed pgrep to add '-x' so it wont partial match on the exe name. - I have multiple instances with multiple hyperiond-instance1 names - this ensures the service script only kills the right process * reversing errant change to hyperion.systemd.sh * Experimental changes to piblaster code to work how i think it should It is now assumed that the PWM pins in groups of 3 correspond to RGB channels of the led. "assignment" : "rgbrgbrgb", Would result in: //Channel number GPIO number Led channel // 0 4 0 red // 1 17 0 green // 2 18 0 blue // 4 27 1 red // 5 21 1 green // 6 22 1 blue // 7 23 2 red // 8 24 2 green // 9 25 2 blue * Ammend pwm channel mapping comments to match the code * 1st cut of the new more flexible piblaster pin mapping support it works but is still rough * removed old "assignment" handling - prints an error messaage if found and terminates fixed the switchoff method * removing iPins hard coded list of valid GPIO pins * removed iPins array for switchOff function * code cleanups input validation * Handle catching (and ignoring) SIGPIPE. You can now kill and restart pi-blaster daemon and hyperiond will gracefully recover * added a binary for testing * Added sample config and my modified pi-blaster version to support more GPIOs * moved hyperiond * removed testing binaries move sample configuration to the configs directory * re enabled device config display * removed sample configuration Former-commit-id: 95e4d4ea2fb7cb5439e8cd597883a638da61a574
2016-04-29 16:00:33 +02:00
for (unsigned int i=0; i < TABLE_SZ; i++ )
{
Disentangle LedDevice/LinearColorSmoothing, Bug Fixes & Test support (#654) * Handle Exceptions in main & Pythoninit * Have SSDPDiscover generic again * Have SSDPDiscover generic again * Change Info- to Debug logs as technical service messages * Nanoleaf - When switched on, ensure UDP mode * Include SQL Database in Cross-Compile instructions * Fix Clazy (QT code checker) and clang Warnings * Stop LedDevice:write for disabled device * Nanoleaf: Fix uint printfs * NanoLeaf: Fix indents to tabs * NanoLeaf - Add debug verbosity switches * Device switchability support, FileDevice with timestamp support * Nanoleaf Light Panels now support External Control V2 * Enhance LedDeviceFile by Timestamp + fix readyness * Stop color stream, if LedDevice disabled * Nanoleaf - remove switchability * Fix MultiColorAdjustment, if led-range is greater lednum * Fix logging * LedFileDevice/LedDevice - add testing support * New "Led Test" effect * LedDeviceFile - Add chrono include + Allow Led rewrites for testing * Stabilize Effects for LedDevices where latchtime = 0 * Update LedDeviceFile, allow latchtime = 0 * Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates * Updates LedDeviceFile - Initialize via Open * Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions * Updates ProviderUDP - Remove throwing exceptions * Framebuffer - Use precise timer * TestSpi - Align to LedDevice updates * Pretty Print CrossCompileHowTo as markdown-file * Ensure that output is only written when LedDevice is ready * Align APA102 Device to new device staging * Logger - Remove clang warnings on extra semicolon * Devices SPI - Align to Device stages and methods * Fix cppcheck and clang findings * Add Code-Template for new Devices * Align devices to stages and methods, clean-up some code * Allow to reopen LedDevice without restart * Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes" * Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic * Expose LedDevice getLedCount and align signedness
2020-02-10 15:21:58 +01:00
int valueIdx = _gpio_to_led[ i ];
if ( (valueIdx >= 0) && (valueIdx < static_cast<int>( _ledCount)) )
{
Piblaster fix (#614) * Removed -HUP so the default -TERM signal is sent instead. - hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config Changed pgrep to add '-x' so it wont partial match on the exe name. - I have multiple instances with multiple hyperiond-instance1 names - this ensures the service script only kills the right process * reversing errant change to hyperion.systemd.sh * Experimental changes to piblaster code to work how i think it should It is now assumed that the PWM pins in groups of 3 correspond to RGB channels of the led. "assignment" : "rgbrgbrgb", Would result in: //Channel number GPIO number Led channel // 0 4 0 red // 1 17 0 green // 2 18 0 blue // 4 27 1 red // 5 21 1 green // 6 22 1 blue // 7 23 2 red // 8 24 2 green // 9 25 2 blue * Ammend pwm channel mapping comments to match the code * 1st cut of the new more flexible piblaster pin mapping support it works but is still rough * removed old "assignment" handling - prints an error messaage if found and terminates fixed the switchoff method * removing iPins hard coded list of valid GPIO pins * removed iPins array for switchOff function * code cleanups input validation * Handle catching (and ignoring) SIGPIPE. You can now kill and restart pi-blaster daemon and hyperiond will gracefully recover * added a binary for testing * Added sample config and my modified pi-blaster version to support more GPIOs * moved hyperiond * removed testing binaries move sample configuration to the configs directory * re enabled device config display * removed sample configuration Former-commit-id: 95e4d4ea2fb7cb5439e8cd597883a638da61a574
2016-04-29 16:00:33 +02:00
double pwmDutyCycle = 0.0;
switch (_gpio_to_color[ i ])
Piblaster fix (#614) * Removed -HUP so the default -TERM signal is sent instead. - hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config Changed pgrep to add '-x' so it wont partial match on the exe name. - I have multiple instances with multiple hyperiond-instance1 names - this ensures the service script only kills the right process * reversing errant change to hyperion.systemd.sh * Experimental changes to piblaster code to work how i think it should It is now assumed that the PWM pins in groups of 3 correspond to RGB channels of the led. "assignment" : "rgbrgbrgb", Would result in: //Channel number GPIO number Led channel // 0 4 0 red // 1 17 0 green // 2 18 0 blue // 4 27 1 red // 5 21 1 green // 6 22 1 blue // 7 23 2 red // 8 24 2 green // 9 25 2 blue * Ammend pwm channel mapping comments to match the code * 1st cut of the new more flexible piblaster pin mapping support it works but is still rough * removed old "assignment" handling - prints an error messaage if found and terminates fixed the switchoff method * removing iPins hard coded list of valid GPIO pins * removed iPins array for switchOff function * code cleanups input validation * Handle catching (and ignoring) SIGPIPE. You can now kill and restart pi-blaster daemon and hyperiond will gracefully recover * added a binary for testing * Added sample config and my modified pi-blaster version to support more GPIOs * moved hyperiond * removed testing binaries move sample configuration to the configs directory * re enabled device config display * removed sample configuration Former-commit-id: 95e4d4ea2fb7cb5439e8cd597883a638da61a574
2016-04-29 16:00:33 +02:00
{
case 'r':
pwmDutyCycle = ledValues[valueIdx].red / 255.0;
break;
case 'g':
pwmDutyCycle = ledValues[valueIdx].green / 255.0;
break;
case 'b':
pwmDutyCycle = ledValues[valueIdx].blue / 255.0;
break;
case 'w':
pwmDutyCycle = ledValues[valueIdx].red;
pwmDutyCycle += ledValues[valueIdx].green;
pwmDutyCycle += ledValues[valueIdx].blue;
pwmDutyCycle /= (3.0*255.0);
break;
default:
continue;
Piblaster fix (#614) * Removed -HUP so the default -TERM signal is sent instead. - hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config Changed pgrep to add '-x' so it wont partial match on the exe name. - I have multiple instances with multiple hyperiond-instance1 names - this ensures the service script only kills the right process * reversing errant change to hyperion.systemd.sh * Experimental changes to piblaster code to work how i think it should It is now assumed that the PWM pins in groups of 3 correspond to RGB channels of the led. "assignment" : "rgbrgbrgb", Would result in: //Channel number GPIO number Led channel // 0 4 0 red // 1 17 0 green // 2 18 0 blue // 4 27 1 red // 5 21 1 green // 6 22 1 blue // 7 23 2 red // 8 24 2 green // 9 25 2 blue * Ammend pwm channel mapping comments to match the code * 1st cut of the new more flexible piblaster pin mapping support it works but is still rough * removed old "assignment" handling - prints an error messaage if found and terminates fixed the switchoff method * removing iPins hard coded list of valid GPIO pins * removed iPins array for switchOff function * code cleanups input validation * Handle catching (and ignoring) SIGPIPE. You can now kill and restart pi-blaster daemon and hyperiond will gracefully recover * added a binary for testing * Added sample config and my modified pi-blaster version to support more GPIOs * moved hyperiond * removed testing binaries move sample configuration to the configs directory * re enabled device config display * removed sample configuration Former-commit-id: 95e4d4ea2fb7cb5439e8cd597883a638da61a574
2016-04-29 16:00:33 +02:00
}
// fprintf(_fid, "%i=%f\n", iPins[iPin], pwmDutyCycle);
if ( (fprintf(_fid, "%i=%f\n", i, pwmDutyCycle) < 0) || (fflush(_fid) < 0))
{
Piblaster fix (#614) * Removed -HUP so the default -TERM signal is sent instead. - hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config Changed pgrep to add '-x' so it wont partial match on the exe name. - I have multiple instances with multiple hyperiond-instance1 names - this ensures the service script only kills the right process * reversing errant change to hyperion.systemd.sh * Experimental changes to piblaster code to work how i think it should It is now assumed that the PWM pins in groups of 3 correspond to RGB channels of the led. "assignment" : "rgbrgbrgb", Would result in: //Channel number GPIO number Led channel // 0 4 0 red // 1 17 0 green // 2 18 0 blue // 4 27 1 red // 5 21 1 green // 6 22 1 blue // 7 23 2 red // 8 24 2 green // 9 25 2 blue * Ammend pwm channel mapping comments to match the code * 1st cut of the new more flexible piblaster pin mapping support it works but is still rough * removed old "assignment" handling - prints an error messaage if found and terminates fixed the switchoff method * removing iPins hard coded list of valid GPIO pins * removed iPins array for switchOff function * code cleanups input validation * Handle catching (and ignoring) SIGPIPE. You can now kill and restart pi-blaster daemon and hyperiond will gracefully recover * added a binary for testing * Added sample config and my modified pi-blaster version to support more GPIOs * moved hyperiond * removed testing binaries move sample configuration to the configs directory * re enabled device config display * removed sample configuration Former-commit-id: 95e4d4ea2fb7cb5439e8cd597883a638da61a574
2016-04-29 16:00:33 +02:00
if (_fid != nullptr)
{
fclose(_fid);
_fid = nullptr;
return -1;
}
}
}
}
return 0;
}