hyperion.ng/libsrc/jsonserver/JsonClientConnection.cpp

423 lines
11 KiB
C++
Raw Normal View History

// Qt includes
#include <QCryptographicHash>
#include <QtEndian>
#include <unistd.h>
// project includes
#include "JsonClientConnection.h"
const quint64 FRAME_SIZE_IN_BYTES = 512 * 512 * 2; //maximum size of a frame when sending a message
JsonClientConnection::JsonClientConnection(QTcpSocket *socket)
: QObject()
, _socket(socket)
, _hyperion(Hyperion::getInstance())
, _receiveBuffer()
, _webSocketHandshakeDone(false)
, _onContinuation(false)
, _log(Logger::getInstance("JSONCLIENTCONNECTION"))
, _notEnoughData(false)
, _clientAddress(socket->peerAddress())
, _connectionMode(CON_MODE::INIT)
{
// connect internal signals and slots
connect(_socket, SIGNAL(disconnected()), this, SLOT(socketClosed()));
connect(_socket, SIGNAL(readyRead()), this, SLOT(readData()));
// create a new instance of JsonProcessor
_jsonProcessor = new JsonProcessor(_clientAddress.toString(), _log);
// get the callback messages from JsonProcessor and send it to the client
connect(_jsonProcessor,SIGNAL(callbackMessage(QJsonObject)),this,SLOT(sendMessage(QJsonObject)));
}
JsonClientConnection::~JsonClientConnection()
{
delete _socket;
delete _jsonProcessor;
}
void JsonClientConnection::readData()
{
switch(_connectionMode)
{
case CON_MODE::INIT:
_receiveBuffer = _socket->readAll(); // initial read to determine connection
_connectionMode = (_receiveBuffer.contains("Upgrade: websocket")) ? CON_MODE::WEBSOCKET : CON_MODE::RAW;
// init websockets
if (_connectionMode == CON_MODE::WEBSOCKET)
{
doWebSocketHandshake();
break;
}
// if no ws, hand over the data to raw handling
case CON_MODE::RAW:
handleRawJsonData();
break;
case CON_MODE::WEBSOCKET:
handleWebSocketFrame();
break;
}
}
void JsonClientConnection::handleRawJsonData()
{
_receiveBuffer += _socket->readAll();
// raw socket data, handling as usual
int bytes = _receiveBuffer.indexOf('\n') + 1;
while(bytes > 0)
{
// create message string
QString message(QByteArray(_receiveBuffer.data(), bytes));
// remove message data from buffer
_receiveBuffer = _receiveBuffer.mid(bytes);
// handle message
_jsonProcessor->handleMessage(message);
// try too look up '\n' again
bytes = _receiveBuffer.indexOf('\n') + 1;
}
}
void JsonClientConnection::getWsFrameHeader(WebSocketHeader* header)
{
char fin_rsv_opcode, mask_length;
_socket->getChar(&fin_rsv_opcode);
_socket->getChar(&mask_length);
header->fin = (fin_rsv_opcode & BHB0_FIN) == BHB0_FIN;
header->opCode = fin_rsv_opcode & BHB0_OPCODE;
header->masked = (mask_length & BHB1_MASK) == BHB1_MASK;
header->payloadLength = mask_length & BHB1_PAYLOAD;
// get size of payload
switch (header->payloadLength)
{
case payload_size_code_16bit:
{
QByteArray buf = _socket->read(2);
2017-10-14 17:37:22 +02:00
header->payloadLength = ((buf.at(0) << 8) & 0xFF00) | (buf.at(1) & 0xFF);
}
break;
case payload_size_code_64bit:
{
QByteArray buf = _socket->read(8);
header->payloadLength = 0;
for (uint i=0; i < 8; i++)
{
header->payloadLength |= ((quint64)(buf.at(i) & 0xFF)) << (8*(7-i));
}
}
break;
}
// if the data is masked we need to get the key for unmasking
if (header->masked)
{
_socket->read(header->key, 4);
}
}
void JsonClientConnection::handleWebSocketFrame()
{
//printf("frame\n");
// we are on no continious reading from socket from call before
if (!_notEnoughData)
{
getWsFrameHeader(&_wsh);
}
if(_socket->bytesAvailable() < (qint64)_wsh.payloadLength)
{
//printf("not enough data %llu %llu\n", _socket->bytesAvailable(), _wsh.payloadLength);
_notEnoughData=true;
return;
}
_notEnoughData = false;
QByteArray buf = _socket->read(_wsh.payloadLength);
//printf("opcode %x payload bytes %llu avail: %llu\n", _wsh.opCode, _wsh.payloadLength, _socket->bytesAvailable());
if (OPCODE::invalid((OPCODE::value)_wsh.opCode))
{
sendClose(CLOSECODE::INV_TYPE, "invalid opcode");
return;
}
// check the type of data frame
bool isContinuation=false;
switch (_wsh.opCode)
{
case OPCODE::CONTINUATION:
isContinuation = true;
// no break here, just jump over to opcode text
case OPCODE::BINARY:
case OPCODE::TEXT:
{
// check for protocal violations
if (_onContinuation && !isContinuation)
{
sendClose(CLOSECODE::VIOLATION, "protocol violation, somebody sends frames in between continued frames");
return;
}
if (!_wsh.masked && _wsh.opCode == OPCODE::TEXT)
{
sendClose(CLOSECODE::VIOLATION, "protocol violation, unmasked text frames not allowed");
return;
}
// unmask data
for (int i=0; i < buf.size(); i++)
{
buf[i] = buf[i] ^ _wsh.key[i % 4];
}
_onContinuation = !_wsh.fin || isContinuation;
// frame contains text, extract it, append data if this is a continuation
if (_wsh.fin && ! isContinuation) // one frame
{
_wsReceiveBuffer.clear();
}
_wsReceiveBuffer.append(buf);
// this is the final frame, decode and handle data
if (_wsh.fin)
{
_onContinuation = false;
if (_wsh.opCode == OPCODE::TEXT)
{
_jsonProcessor->handleMessage(QString(_wsReceiveBuffer));
}
else
{
handleBinaryMessage(_wsReceiveBuffer);
}
_wsReceiveBuffer.clear();
}
}
break;
case OPCODE::CLOSE:
{
sendClose(CLOSECODE::NORMAL);
}
break;
case OPCODE::PING:
{
// ping received, send pong
quint8 pong[] = {OPCODE::PONG, 0};
_socket->write((const char*)pong, 2);
_socket->flush();
}
break;
case OPCODE::PONG:
{
Error(_log, "pong recievied, protocol violation!");
}
default:
Warning(_log, "strange %d\n%s\n", _wsh.opCode, QSTRING_CSTR(QString(buf)));
}
}
/// See http://tools.ietf.org/html/rfc6455#section-5.2 for more information
void JsonClientConnection::sendClose(int status, QString reason)
{
Info(_log, "send close: %d %s", status, QSTRING_CSTR(reason));
ErrorIf(!reason.isEmpty(), _log, QSTRING_CSTR(reason));
_receiveBuffer.clear();
QByteArray sendBuffer;
sendBuffer.append(136+(status-1000));
int length = reason.size();
if(length >= 126)
{
sendBuffer.append( (length > 0xffff) ? 127 : 126);
int num_bytes = (length > 0xffff) ? 8 : 2;
for(int c = num_bytes - 1; c != -1; c--)
{
sendBuffer.append( quint8((static_cast<unsigned long long>(length) >> (8 * c)) % 256));
}
}
else
{
sendBuffer.append(quint8(length));
}
sendBuffer.append(reason);
_socket->write(sendBuffer);
_socket->flush();
_socket->close();
}
void JsonClientConnection::doWebSocketHandshake()
{
// http header, might not be a very reliable check...
Debug(_log, "Websocket handshake");
// get the key to prepare an answer
int start = _receiveBuffer.indexOf("Sec-WebSocket-Key") + 19;
QByteArray value = _receiveBuffer.mid(start, _receiveBuffer.indexOf("\r\n", start) - start);
_receiveBuffer.clear();
// must be always appended
value += "258EAFA5-E914-47DA-95CA-C5AB0DC85B11";
// generate sha1 hash
QByteArray hash = QCryptographicHash::hash(value, QCryptographicHash::Sha1).toBase64();
// prepare an answer
QString data
= QString("HTTP/1.1 101 Switching Protocols\r\n")
+ QString("Upgrade: websocket\r\n")
+ QString("Connection: Upgrade\r\n")
+ QString("Sec-WebSocket-Accept: ")+QString(hash.data()) + "\r\n\r\n";
_socket->write(QSTRING_CSTR(data), data.size());
_socket->flush();
// we are in WebSocket mode, data frames should follow next
_webSocketHandshakeDone = true;
}
void JsonClientConnection::socketClosed()
{
_webSocketHandshakeDone = false;
emit connectionClosed(this);
}
QByteArray JsonClientConnection::makeFrameHeader(quint8 opCode, quint64 payloadLength, bool lastFrame)
{
QByteArray header;
if (payloadLength <= 0x7FFFFFFFFFFFFFFFULL)
{
//FIN, RSV1-3, opcode (RSV-1, RSV-2 and RSV-3 are zero)
quint8 byte = static_cast<quint8>((opCode & 0x0F) | (lastFrame ? 0x80 : 0x00));
header.append(static_cast<char>(byte));
byte = 0x00;
if (payloadLength <= 125)
{
byte |= static_cast<quint8>(payloadLength);
header.append(static_cast<char>(byte));
}
else if (payloadLength <= 0xFFFFU)
{
byte |= 126;
header.append(static_cast<char>(byte));
quint16 swapped = qToBigEndian<quint16>(static_cast<quint16>(payloadLength));
header.append(static_cast<const char *>(static_cast<const void *>(&swapped)), 2);
}
else
{
byte |= 127;
header.append(static_cast<char>(byte));
quint64 swapped = qToBigEndian<quint64>(payloadLength);
header.append(static_cast<const char *>(static_cast<const void *>(&swapped)), 8);
}
}
else
{
Error(_log, "JsonClientConnection::getHeader: payload too big!");
}
return header;
}
qint64 JsonClientConnection::sendMessage(QJsonObject message)
{
QJsonDocument writer(message);
QByteArray serializedReply = writer.toJson(QJsonDocument::Compact) + "\n";
if (!_socket || (_socket->state() != QAbstractSocket::ConnectedState)) return 0;
if (_webSocketHandshakeDone) return sendMessage_Websockets(serializedReply);
return sendMessage_Raw(serializedReply);
}
qint64 JsonClientConnection::sendMessage_Raw(const char* data, quint64 size)
{
return _socket->write(data, size);
}
qint64 JsonClientConnection::sendMessage_Raw(QByteArray &data)
{
return _socket->write(data.data(), data.size());
}
qint64 JsonClientConnection::sendMessage_Websockets(QByteArray &data)
{
qint64 payloadWritten = 0;
quint32 payloadSize = data.size();
const char * payload = data.data();
qint32 numFrames = payloadSize / FRAME_SIZE_IN_BYTES + ((quint64(payloadSize) % FRAME_SIZE_IN_BYTES) > 0 ? 1 : 0);
for (int i = 0; i < numFrames; ++i)
{
const bool isLastFrame = (i == (numFrames - 1));
quint64 position = i * FRAME_SIZE_IN_BYTES;
quint32 frameSize = (payloadSize-position >= FRAME_SIZE_IN_BYTES) ? FRAME_SIZE_IN_BYTES : (payloadSize-position);
QByteArray buf = makeFrameHeader(OPCODE::TEXT, frameSize, isLastFrame);
sendMessage_Raw(buf);
qint64 written = sendMessage_Raw(payload+position,frameSize);
if (written > 0)
{
payloadWritten += written;
}
else
{
_socket->flush();
Error(_log, "Error writing bytes to socket: %s", QSTRING_CSTR(_socket->errorString()));
break;
}
}
2013-08-18 12:02:17 +02:00
if (payloadSize != payloadWritten)
{
Error(_log, "Error writing bytes to socket %d bytes from %d writte", payloadWritten, payloadSize);
return -1;
}
return payloadWritten;
}
void JsonClientConnection::handleBinaryMessage(QByteArray &data)
{
uint8_t priority = data.at(0);
unsigned duration_s = data.at(1);
unsigned imgSize = data.size() - 4;
unsigned width = ((data.at(2) << 8) & 0xFF00) | (data.at(3) & 0xFF);
unsigned height = imgSize / width;
if ( ! (imgSize) % width)
{
Error(_log, "data size is not multiple of width");
return;
}
Image<ColorRgb> image;
image.resize(width, height);
memcpy(image.memptr(), data.data()+4, imgSize);
_hyperion->setImage(priority, image, duration_s*1000);
}