Merge pull request #2 from hyperion-project/master

pull

assets/webconfig/i18n/cs.json

@@ -294,7 +294,8 @@
     "wiz_cc_btn_stop": "Stopnout video",
     "wiz_cc_summary": "Závěr nastavení. Během přehrávání videa můžete znovu měnit nebo otestovat hodnoty. Pokud jste hotovi, klikněte na tlačítko Uložit.",
     "edt_dev_enum_subtract_minimum": "Odčtěte minimum",
-    "edt_dev_enum_sub_min_warm_adjust": "Teplota barvy",
+    "edt_dev_enum_sub_min_cool_adjust": "Teplota barvy: cool",
+    "edt_dev_enum_sub_min_warm_adjust": "Teplota barvy: warm",
     "edt_dev_enum_white_off": "Bílá vypnutá",
     "edt_dev_general_heading_title": "Obecné nastavení",
     "edt_dev_general_name_title": "Název konfigurace",

assets/webconfig/i18n/de.json

@@ -348,6 +348,7 @@
 	"wiz_cc_summary" : "Im folgenden eine Zusammenfassung deiner Einstellungen. Während du ein Video abspielst, kannst du hier weiter ausprobieren. Wenn du fertig bist, klicke auf speichern.",
 	"edt_dev_auth_key_title" : "Aurora API Schlüssel",
 	"edt_dev_enum_subtract_minimum" : "Subtrahiere minimum",
+	"edt_dev_enum_sub_min_cool_adjust" : "Minimale Anpassung: cool",
 	"edt_dev_enum_sub_min_warm_adjust" : "Minimale Anpassung: warm",
 	"edt_dev_enum_white_off" : "Weiß ist aus",
 	"edt_dev_general_heading_title" : "Allgemeine Einstellungen",

assets/webconfig/i18n/en.json

@@ -348,7 +348,8 @@
 	"wiz_cc_summary" : "A conclusion of your settings. During video playback, you could change or test values again. If you are done, click on save.",
 	"edt_dev_auth_key_title" : "Aurora API Key",
 	"edt_dev_enum_subtract_minimum" : "Substract minimum",
-	"edt_dev_enum_sub_min_warm_adjust" : "Min warm adjust",
+	"edt_dev_enum_sub_min_cool_adjust" : "Subtract cool white",
+	"edt_dev_enum_sub_min_warm_adjust" : "Subtract warm white",
 	"edt_dev_enum_white_off" : "White off",
 	"edt_dev_general_heading_title" : "General Settings",
 	"edt_dev_general_name_title" : "Configuration name",

assets/webconfig/i18n/es.json

@@ -294,6 +294,7 @@
     "wiz_cc_btn_stop": "Parar vídeo",
     "wiz_cc_summary": "Una conclusión de su configuración. Durante la reproducción de vídeo, puede cambiar o probar valores de nuevo. Si está hecho, haga clic en guardar.",
     "edt_dev_enum_subtract_minimum": "Restar mínimo",
+    "edt_dev_enum_sub_min_cool_adjust": "Min. Ajuste fresco",
     "edt_dev_enum_sub_min_warm_adjust": "Min. Ajuste caliente",
     "edt_dev_enum_white_off": "Blanco apagado",
     "edt_dev_general_heading_title": "Configuración general",
@@ -753,4 +754,4 @@
     "edt_conf_enum_SECAM": "SECAM",
     "general_speech_it": "Italiano",
     "general_speech_cs": "Czech"
-}
+}

assets/webconfig/i18n/it.json

@@ -294,6 +294,7 @@
     "wiz_cc_btn_stop": "Interrompi video",
     "wiz_cc_summary": "Conclusione delle tue impostazioni. Durante la riproduzione video puoi cambiare nuovamente i valori. Se hai finito clicca su salva.",
     "edt_dev_enum_subtract_minimum": "Sottrai minimo",
+    "edt_dev_enum_sub_min_cool_adjust": "Regolazione freddo min",
     "edt_dev_enum_sub_min_warm_adjust": "Regolazione calore min",
     "edt_dev_enum_white_off": "Bianco off",
     "edt_dev_general_heading_title": "Impostazioni Generali",

include/utils/RgbToRgbw.h

@@ -6,7 +6,13 @@
 
 namespace RGBW {
 
-	enum WhiteAlgorithm { INVALID, SUBTRACT_MINIMUM, SUB_MIN_WARM_ADJUST, WHITE_OFF };
+	enum WhiteAlgorithm {
+		INVALID,
+		SUBTRACT_MINIMUM,
+		SUB_MIN_WARM_ADJUST,
+		SUB_MIN_COOL_ADJUST,
+		WHITE_OFF
+	};
 	
 	WhiteAlgorithm stringToWhiteAlgorithm(QString str);
 	void Rgb_to_Rgbw(ColorRgb input, ColorRgbw * output, const WhiteAlgorithm algorithm);

libsrc/leddevice/dev_net/LedDevicePhilipsHue.cpp

@@ -36,9 +36,10 @@ CiColor CiColor::rgbToCiColor(float red, float green, float blue, CiColorTriangl
 	{
 		cy = 0.0f;
 	}
-	// Brightness is simply Y in the XYZ space.
+	// RGB to HSV/B Conversion after gamma correction use V for brightness, not Y from XYZ Space.
+	float bri = fmax(fmax(r, g), b);
 	CiColor xy =
-	{ cx, cy, Y };
+	{ cx, cy, bri };
 	// Check if the given XY value is within the color reach of our lamps.
 	if (!isPointInLampsReach(xy, colorSpace))
 	{
@@ -212,7 +213,7 @@ const std::set<QString> PhilipsHueLight::GAMUT_A_MODEL_IDS =
 const std::set<QString> PhilipsHueLight::GAMUT_B_MODEL_IDS =
 { "LCT001", "LCT002", "LCT003", "LCT007", "LLM001" };
 const std::set<QString> PhilipsHueLight::GAMUT_C_MODEL_IDS =
-{ "LLC020", "LST002", "LCT011", "LCT012", "LCT010", "LCT014" };
+{ "LLC020", "LST002", "LCT011", "LCT012", "LCT010", "LCT014", "LCT015", "LCT016", "LCT024" };
 
 PhilipsHueLight::PhilipsHueLight(Logger* log, PhilipsHueBridge* bridge, unsigned int id, QJsonObject values)
 	: log(log)
@@ -249,7 +250,7 @@ PhilipsHueLight::PhilipsHueLight(Logger* log, PhilipsHueBridge* bridge, unsigned
 	{
 		Debug(log, "Recognized model id %s of light ID %d as gamut A", modelId.toStdString().c_str(), id);
 		colorSpace.red =
-		{	0.703f, 0.296f};
+		{	0.704f, 0.296f};
 		colorSpace.green =
 		{	0.2151f, 0.7106f};
 		colorSpace.blue =
@@ -261,7 +262,7 @@ PhilipsHueLight::PhilipsHueLight(Logger* log, PhilipsHueBridge* bridge, unsigned
 		colorSpace.red =
 		{	0.675f, 0.322f};
 		colorSpace.green =
-		{	0.4091f, 0.518f};
+		{	0.409f, 0.518f};
 		colorSpace.blue =
 		{	0.167f, 0.04f};
 	}
@@ -269,11 +270,11 @@ PhilipsHueLight::PhilipsHueLight(Logger* log, PhilipsHueBridge* bridge, unsigned
 	{
 		Debug(log, "Recognized model id %s of light ID %d as gamut C", modelId.toStdString().c_str(), id);
 		colorSpace.red =
-		{	0.675f, 0.322f};
+		{	0.6915f, 0.3083f};
 		colorSpace.green =
-		{	0.2151f, 0.7106f};
+		{	0.17f, 0.7f};
 		colorSpace.blue =
-		{	0.167f, 0.04f};
+		{	0.1532f, 0.0475f};
 	}
 	else
 	{

libsrc/leddevice/dev_rpi_pwm/LedDeviceWS281x.cpp

@@ -20,9 +20,10 @@ bool LedDeviceWS281x::init(const QJsonObject &deviceConfig)
 {
 	LedDevice::init(deviceConfig);
 
-	QString whiteAlgorithm = deviceConfig["white_algorithm"].toString("white_off");
+	QString whiteAlgorithm = deviceConfig["whiteAlgorithm"].toString("white_off");
 	_whiteAlgorithm            = RGBW::stringToWhiteAlgorithm(whiteAlgorithm);
 	Debug( _log, "whiteAlgorithm : %s", QSTRING_CSTR(whiteAlgorithm));
+	Debug( _log, "rgbw : %d", deviceConfig["rgbw"].toBool(false) );
 	if (_whiteAlgorithm == RGBW::INVALID)
 	{
 		Error(_log, "unknown whiteAlgorithm %s", QSTRING_CSTR(whiteAlgorithm));
@@ -40,7 +41,7 @@ bool LedDeviceWS281x::init(const QJsonObject &deviceConfig)
 	_led_string.channel[_channel].gpionum    = deviceConfig["gpio"].toInt(18);
 	_led_string.channel[_channel].count      = deviceConfig["leds"].toInt(256);
 	_led_string.channel[_channel].invert     = deviceConfig["invert"].toInt(0);
-	_led_string.channel[_channel].strip_type = ((deviceConfig["rgbw"].toInt(0) == 1) ? SK6812_STRIP_GRBW : WS2811_STRIP_RGB);
+	_led_string.channel[_channel].strip_type = (deviceConfig["rgbw"].toBool(false) ? SK6812_STRIP_GRBW : WS2811_STRIP_RGB);
 	_led_string.channel[_channel].brightness = 255;
 
 	_led_string.channel[!_channel].gpionum = 0;
@@ -49,6 +50,7 @@ bool LedDeviceWS281x::init(const QJsonObject &deviceConfig)
 	_led_string.channel[!_channel].brightness = 0;
 	_led_string.channel[!_channel].strip_type = WS2811_STRIP_RGB;
 
+	Debug( _log, "ws281x strip type : %d", _led_string.channel[_channel].strip_type );
 
 	if (ws2811_init(&_led_string) < 0)
 	{

libsrc/leddevice/dev_spi/LedDeviceSk6812SPI.cpp

@@ -21,7 +21,7 @@ LedDevice* LedDeviceSk6812SPI::construct(const QJsonObject &deviceConfig)
 
 bool LedDeviceSk6812SPI::init(const QJsonObject &deviceConfig)
 {
-	QString whiteAlgorithm = deviceConfig["white_algorithm"].toString("white_off");
+	QString whiteAlgorithm = deviceConfig["whiteAlgorithm"].toString("white_off");
 	_whiteAlgorithm            = RGBW::stringToWhiteAlgorithm(whiteAlgorithm);
 
 	if (_whiteAlgorithm == RGBW::INVALID)

libsrc/leddevice/schemas/schema-sk6812spi.json

@@ -23,10 +23,10 @@
 		"whiteAlgorithm": {
 			"type": "string",
 			"title":"edt_dev_spec_whiteLedAlgor_title",
-			"enum" : ["subtract_minimum","sub_min_warm_adjust","white_off"],
+			"enum" : ["subtract_minimum","sub_min_cool_adjust","sub_min_warm_adjust","white_off"],
 			"default": "subtract_minimum",
 			"options" : {
-				"enum_titles" : ["edt_dev_enum_subtract_minimum", "edt_dev_enum_sub_min_warm_adjust", "edt_dev_enum_white_off"]
+				"enum_titles" : ["edt_dev_enum_subtract_minimum", "edt_dev_enum_sub_min_cool_adjust","edt_dev_enum_sub_min_warm_adjust", "edt_dev_enum_white_off"]
 			},
 			"propertyOrder" : 4
 		},

libsrc/leddevice/schemas/schema-ws281x.json

@@ -35,10 +35,10 @@
 		"whiteAlgorithm": {
 			"type": "string",
 			"title":"edt_dev_spec_whiteLedAlgor_title",
-			"enum" : ["subtract_minimum","sub_min_warm_adjust","white_off"],
+			"enum" : ["subtract_minimum","sub_min_cool_adjust","sub_min_warm_adjust","white_off"],
 			"default": "subtract_minimum",
 			"options" : {
-				"enum_titles" : ["edt_dev_enum_subtract_minimum", "edt_dev_enum_sub_min_warm_adjust", "edt_dev_enum_white_off"]
+				"enum_titles" : ["edt_dev_enum_subtract_minimum", "edt_dev_enum_sub_min_cool_adjust","edt_dev_enum_sub_min_warm_adjust", "edt_dev_enum_white_off"]
 			},
 			"propertyOrder" : 6
 		},

libsrc/utils/RgbToRgbw.cpp

@@ -9,6 +9,7 @@ WhiteAlgorithm stringToWhiteAlgorithm(QString str)
 {
 	if (str == "subtract_minimum")         return SUBTRACT_MINIMUM;
 	if (str == "sub_min_warm_adjust")      return SUB_MIN_WARM_ADJUST;
+	if (str == "sub_min_cool_adjust")      return SUB_MIN_COOL_ADJUST;
 	if (str.isEmpty() || str == "white_off") return WHITE_OFF;
 	return INVALID;
 }
@@ -28,7 +29,31 @@ void Rgb_to_Rgbw(ColorRgb input, ColorRgbw * output, const WhiteAlgorithm algori
 		
 		case SUB_MIN_WARM_ADJUST:
 		{
-			Error(Logger::getInstance("RGBtoRGBW"), "white algorithm 'sub_min_warm_adjust' is not implemented yet." );
+			// http://forum.garagecube.com/viewtopic.php?t=10178
+			// warm white 
+			float F1 = 0.274;
+			float F2 = 0.454;
+			float F3 = 2.333;
+
+			output->white = qMin(input.red*F1,qMin(input.green*F2,input.blue*F3));
+			output->red   = input.red   - output->white/F1;
+			output->green = input.green - output->white/F2;
+			output->blue  = input.blue  - output->white/F3;
+			break;
+		}
+
+		case SUB_MIN_COOL_ADJUST:
+		{
+			// http://forum.garagecube.com/viewtopic.php?t=10178
+			// cold white 
+			float F1 = 0.299;
+			float F2 = 0.587;
+			float F3 = 0.114;
+
+			output->white = qMin(input.red*F1,qMin(input.green*F2,input.blue*F3));
+			output->red   = input.red   - output->white/F1;
+			output->green = input.green - output->white/F2;
+			output->blue  = input.blue  - output->white/F3;
 			break;
 		}