mirror of
https://github.com/hyperion-project/hyperion.ng.git
synced 2025-03-01 10:33:28 +00:00
implement origin for effects (#408)
* implement rigin for efx * implement origin for effects and other components add experimental adalight firmware for arduino with upto 5 pwm channels * cleanup * origin ip now with dns lookup * fix compile * move some code
This commit is contained in:
redPanther
GitHub
250
assets/firmware/arduino/adalight_mega_pwm/hyperion_mega.ino
Normal file
250
assets/firmware/arduino/adalight_mega_pwm/hyperion_mega.ino
Normal file
@@ -0,0 +1,250 @@
|
||||
|
||||
#include "FastLED.h"
|
||||
|
||||
#define ANALOG_MODE_AVERAGE 0
|
||||
#define ANALOG_MODE_LAST_LED 1
|
||||
|
||||
/**************************************
|
||||
S E T U P
|
||||
|
||||
set following values to your needs
|
||||
**************************************/
|
||||
|
||||
// Number of leds in your strip. set to 1 and ANALOG_OUTPUT_ENABLED to true to activate analog only
|
||||
#define NUM_LEDS 100
|
||||
|
||||
#define LED_TYPE WS2812B // type of your led controller, possible values, see below
|
||||
|
||||
// 3 wire (pwm): NEOPIXEL BTM1829 TM1812 TM1809 TM1804 TM1803 UCS1903 UCS1903B UCS1904 UCS2903 WS2812 WS2852
|
||||
// S2812B SK6812 SK6822 APA106 PL9823 WS2811 WS2813 APA104 WS2811_40 GW6205 GW6205_40 LPD1886 LPD1886_8BIT
|
||||
// 4 wire (spi): LPD8806 WS2801 WS2803 SM16716 P9813 APA102 SK9822 DOTSTAR
|
||||
|
||||
// For 3 wire led stripes line Neopixel/Ws2812, which have a data line, ground, and power, you just need to define DATA_PIN.
|
||||
// For led chipsets that are SPI based (four wires - data, clock, ground, and power), both defines DATA_PIN and CLOCK_PIN are needed
|
||||
|
||||
// DATA_PIN, or DATA_PIN, CLOCK_PIN
|
||||
#define LED_PINS MOSI // 3 wire leds
|
||||
//#define LED_PINS MOSI, SCK // 4 wire leds
|
||||
|
||||
#define COLOR_ORDER GRB // colororder of the stripe, set RGB in hyperion
|
||||
|
||||
#define OFF_TIMEOUT 15000 // ms to switch off after no data was received, set 0 to deactivate
|
||||
|
||||
// analog rgb uni color led stripe - using of hyperion smoothing is recommended
|
||||
#define ANALOG_MODE ANALOG_MODE_LAST_LED // use ANALOG_MODE_AVERAGE or ANALOG_MODE_LAST_LED
|
||||
|
||||
|
||||
// overall color adjustments
|
||||
#define ANALOG_BRIGHTNESS_RED 255 // maximum brightness for analog 0-255
|
||||
#define ANALOG_BRIGHTNESS_GREEN 255 // maximum brightness for analog 0-255
|
||||
#define ANALOG_BRIGHTNESS_BLUE 255 // maximum brightness for analog 0-255
|
||||
|
||||
#define BRIGHTNESS 128 // maximum brightness 0-255
|
||||
#define DITHER_MODE BINARY_DITHER // BINARY_DITHER or DISABLE_DITHER
|
||||
#define COLOR_TEMPERATURE CRGB(255,255,255) // RGB value describing the color temperature
|
||||
#define COLOR_CORRECTION TypicalLEDStrip // predefined fastled color correction
|
||||
//#define COLOR_CORRECTION CRGB(255,255,255) // or RGB value describing the color correction
|
||||
|
||||
|
||||
// Baudrate, higher rate allows faster refresh rate and more LEDs (defined in /etc/boblight.conf)
|
||||
#define serialRate 115200 // use 115200 for ftdi based boards
|
||||
//#define serialRate 460800 // use 115200 for ftdi based boards
|
||||
|
||||
// ATTENTION this pin config is default for atmega328 based arduinos, others might work to
|
||||
// if you have flickering analog leds this might be caused by unsynced pwm signals
|
||||
// try other pins is more or less the only thing that helps
|
||||
|
||||
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||||
// 2 3 4 5 6 7 8 9 10 11 12 13 44 45 46
|
||||
// R B G R B G R B G R B G R B G
|
||||
#define ANALOG_PINS_MAX 15
|
||||
#define ANALOG_RGB_STRIPES 4
|
||||
const byte ANALOG_PINS[ANALOG_PINS_MAX] = {2,4,3,5,7,6,8,10,9,11,13,12,44,46,45};
|
||||
#else
|
||||
// 9 10 11
|
||||
// R B G
|
||||
#define ANALOG_PINS_MAX 3
|
||||
#define ANALOG_RGB_STRIPES 1
|
||||
const byte ANALOG_PINS[ANALOG_PINS_MAX] = {9,11,10};
|
||||
#endif
|
||||
|
||||
/**************************************
|
||||
A D A L I G H T C O D E
|
||||
|
||||
no user changes needed
|
||||
**************************************/
|
||||
|
||||
// Adalight sends a "Magic Word" (defined in /etc/boblight.conf) before sending the pixel data
|
||||
uint8_t prefix[] = {'A', 'd', 'a'}, hi, lo, chk, i;
|
||||
|
||||
unsigned long endTime;
|
||||
|
||||
// Define the array of leds
|
||||
CRGB leds[NUM_LEDS];
|
||||
|
||||
// set rgb to analog led stripe
|
||||
void showAnalogRGB(const CRGB& led, const short stripeId=-1) {
|
||||
if (ANALOG_RGB_STRIPES > 0) {
|
||||
byte r = map(led.r, 0,255,0,ANALOG_BRIGHTNESS_RED);
|
||||
byte g = map(led.g, 0,255,0,ANALOG_BRIGHTNESS_GREEN);
|
||||
byte b = map(led.b, 0,255,0,ANALOG_BRIGHTNESS_BLUE);
|
||||
if (stripeId<0) {
|
||||
for (byte i=0;i<ANALOG_RGB_STRIPES;i++) {
|
||||
analogWrite(ANALOG_PINS[3*i+1], r);
|
||||
analogWrite(ANALOG_PINS[3*i] , g);
|
||||
analogWrite(ANALOG_PINS[3*i+2], b);
|
||||
}
|
||||
} else {
|
||||
analogWrite(ANALOG_PINS[stripeId*3] , g);
|
||||
analogWrite(ANALOG_PINS[stripeId*3+1], r);
|
||||
analogWrite(ANALOG_PINS[stripeId*3+2], b);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// set color to all leds
|
||||
void showColor(const CRGB& led) {
|
||||
#if NUM_LEDS > ANALOG_RGB_STRIPES
|
||||
LEDS.showColor(led);
|
||||
#endif
|
||||
showAnalogRGB(led);
|
||||
}
|
||||
|
||||
|
||||
// function to check if serial data is available
|
||||
// if timeout occured leds switch of, if configured
|
||||
bool checkIncommingData() {
|
||||
boolean dataAvailable = true;
|
||||
while (!Serial.available()) {
|
||||
if ( OFF_TIMEOUT > 0 && endTime < millis()) {
|
||||
showColor(CRGB(0,0,0)); // leds off
|
||||
dataAvailable = false;
|
||||
endTime = millis() + OFF_TIMEOUT;
|
||||
}
|
||||
}
|
||||
|
||||
return dataAvailable;
|
||||
}
|
||||
|
||||
// main function that setups and runs the code
|
||||
void setup() {
|
||||
|
||||
// analog output
|
||||
if (ANALOG_RGB_STRIPES > 0) {
|
||||
for (byte i=0;i<ANALOG_PINS_MAX;i++) {
|
||||
pinMode(ANALOG_PINS[i], OUTPUT);
|
||||
}
|
||||
}
|
||||
|
||||
// Uncomment/edit one of the following lines for your leds arrangement.
|
||||
int ledCount = NUM_LEDS;
|
||||
if (ANALOG_MODE == ANALOG_MODE_LAST_LED) {
|
||||
ledCount -= ANALOG_RGB_STRIPES;
|
||||
}
|
||||
|
||||
#if NUM_LEDS > ANALOG_RGB_STRIPES
|
||||
FastLED.addLeds<LED_TYPE, LED_PINS, COLOR_ORDER>(leds, ledCount);
|
||||
#endif
|
||||
|
||||
// color adjustments
|
||||
FastLED.setBrightness ( BRIGHTNESS );
|
||||
FastLED.setTemperature( COLOR_TEMPERATURE );
|
||||
FastLED.setCorrection ( COLOR_CORRECTION );
|
||||
FastLED.setDither ( DITHER_MODE );
|
||||
|
||||
// initial RGB flash
|
||||
showColor(CRGB(255, 0, 0)); delay(400);
|
||||
showColor(CRGB(0, 255, 0)); delay(400);
|
||||
showColor(CRGB(0, 0, 255)); delay(400);
|
||||
showColor(CRGB(0, 0, 0));
|
||||
|
||||
Serial.begin(serialRate);
|
||||
while (!Serial) {
|
||||
; // wait for serial port to connect. Needed for native USB
|
||||
}
|
||||
Serial.print("Ada\n"); // Send "Magic Word" string to host
|
||||
|
||||
boolean transmissionSuccess;
|
||||
unsigned long sum_r, sum_g, sum_b;
|
||||
|
||||
// loop() is avoided as even that small bit of function overhead
|
||||
// has a measurable impact on this code's overall throughput.
|
||||
while (true) {
|
||||
// wait for first byte of Magic Word
|
||||
for (i = 0; i < sizeof prefix; ++i) {
|
||||
// If next byte is not in Magic Word, the start over
|
||||
if (!checkIncommingData() || prefix[i] != Serial.read()) {
|
||||
i = 0;
|
||||
}
|
||||
}
|
||||
// Hi, Lo, Checksum
|
||||
if (!checkIncommingData()) continue;
|
||||
hi = Serial.read();
|
||||
if (!checkIncommingData()) continue;
|
||||
lo = Serial.read();
|
||||
if (!checkIncommingData()) continue;
|
||||
chk = Serial.read();
|
||||
|
||||
// if checksum does not match go back to wait
|
||||
if (chk != (hi ^ lo ^ 0x55)) continue;
|
||||
|
||||
memset(leds, 0, NUM_LEDS * sizeof(struct CRGB));
|
||||
transmissionSuccess = true;
|
||||
sum_r = 0;
|
||||
sum_g = 0;
|
||||
sum_b = 0;
|
||||
|
||||
// read the transmission data and set LED values
|
||||
for (uint8_t idx = 0; idx < NUM_LEDS; idx++) {
|
||||
byte r, g, b;
|
||||
if (!checkIncommingData()) {
|
||||
transmissionSuccess = false;
|
||||
break;
|
||||
}
|
||||
r = Serial.read();
|
||||
if (!checkIncommingData()) {
|
||||
transmissionSuccess = false;
|
||||
break;
|
||||
}
|
||||
g = Serial.read();
|
||||
if (!checkIncommingData()) {
|
||||
transmissionSuccess = false;
|
||||
break;
|
||||
}
|
||||
b = Serial.read();
|
||||
leds[idx].r = r;
|
||||
leds[idx].g = g;
|
||||
leds[idx].b = b;
|
||||
#if ANALOG_OUTPUT_ENABLED == true && ANALOG_MODE == ANALOG_MODE_AVERAGE
|
||||
sum_r += r;
|
||||
sum_g += g;
|
||||
sum_b += b;
|
||||
#endif
|
||||
}
|
||||
|
||||
// shows new values
|
||||
if (transmissionSuccess) {
|
||||
endTime = millis() + OFF_TIMEOUT;
|
||||
#if NUM_LEDS > ANALOG_RGB_STRIPES
|
||||
FastLED.show();
|
||||
#endif
|
||||
|
||||
#if ANALOG_RGB_STRIPES > 0
|
||||
#if ANALOG_MODE == ANALOG_MODE_LAST_LED
|
||||
for ( byte x=1; x<=ANALOG_RGB_STRIPES; x++) {
|
||||
showAnalogRGB(leds[NUM_LEDS-x], x-1);
|
||||
}
|
||||
#else
|
||||
showAnalogRGB(CRGB(sum_r/NUM_LEDS, sum_g/NUM_LEDS, sum_b/NUM_LEDS));
|
||||
#endif
|
||||
#endif
|
||||
}
|
||||
}
|
||||
} // end of setup
|
||||
|
||||
|
||||
void loop() {
|
||||
// Not used. See note in setup() function.
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user