Limit maximum LEDs number for WLED and UDP-Raw (#1334)

* Have maximum 490 LEDs configured for WLED and UDP-Raw

* Add additional Warning
This commit is contained in:
LordGrey 2021-09-20 09:36:59 +02:00 committed by GitHub
parent 8134917c51
commit 2a10ef955d
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
5 changed files with 94 additions and 5 deletions

View File

@ -57,6 +57,7 @@
"conf_leds_device_intro": "Hyperion supports a lot of controllers to transmit data to your target device. Select a LED controller out of the sorted list and configure it. We have chosen the best default settings for each device.",
"conf_leds_error_hwled_gt_layout": "The hardware LED count ($1) is greater than LEDs configured via layout ($2),<br>$3 {{plural:$3|LED|LEDs}} will stay black if you continue.",
"conf_leds_error_hwled_lt_layout": "The hardware LED count ($1) is less than LEDs configured via layout ($2). <br> The number of LEDs configured in the layout must not exceed the available LEDs",
"conf_leds_error_hwled_gt_maxled": "The hardware LED count ($1) is greater than the maximum number of LEDs supported by the device ($2). <br> The hardware LED count is set to ($3).",
"conf_leds_info_ws281x": "Hyperion must run with 'root' privileges for this controller type!",
"conf_leds_layout_advanced": "Advanced Settings",
"conf_leds_layout_blacklist_num_title": "Number of LEDs",

View File

@ -943,6 +943,11 @@ $(document).ready(function () {
params = { host: host, filter: "info" };
getProperties_device(ledType, host, params);
break;
case "udpraw":
getProperties_device(ledType, host, params);
break;
default:
}
}
@ -1579,11 +1584,11 @@ async function identify_device(type, params) {
function updateElements(ledType, key) {
if (devicesProperties[ledType][key]) {
var hardwareLedCount = 1;
switch (ledType) {
case "cololight":
var ledProperties = devicesProperties[ledType][key];
var hardwareLedCount = 1;
if (ledProperties) {
hardwareLedCount = ledProperties.ledCount;
}
@ -1592,8 +1597,14 @@ function updateElements(ledType, key) {
case "wled":
var ledProperties = devicesProperties[ledType][key];
if (ledProperties && ledProperties.leds) {
if (ledProperties && ledProperties.leds && ledProperties.maxLedCount) {
hardwareLedCount = ledProperties.leds.count;
var maxLedCount = ledProperties.maxLedCount
if (hardwareLedCount > maxLedCount)
{
showInfoDialog('warning', $.i18n("conf_leds_config_warning"), $.i18n('conf_leds_error_hwled_gt_maxled', hardwareLedCount, maxLedCount, maxLedCount));
hardwareLedCount = maxLedCount;
}
}
conf_editor.getEditor("root.generalOptions.hardwareLedCount").setValue(hardwareLedCount);
break;
@ -1615,6 +1626,21 @@ function updateElements(ledType, key) {
break;
case "udpraw":
var ledProperties = devicesProperties[ledType][key];
if (ledProperties && ledProperties.maxLedCount) {
hardwareLedCount = conf_editor.getEditor("root.generalOptions.hardwareLedCount").getValue();
var maxLedCount = ledProperties.maxLedCount
if (hardwareLedCount > maxLedCount)
{
showInfoDialog('warning', $.i18n("conf_leds_config_warning"), $.i18n('conf_leds_error_hwled_gt_maxled', hardwareLedCount, maxLedCount, maxLedCount));
hardwareLedCount = maxLedCount;
}
updateJsonEditorRange(conf_editor, "root.generalOptions", "hardwareLedCount", 1, maxLedCount, hardwareLedCount);
}
break;
case "atmo":
case "karate":
var ledProperties = devicesProperties[ledType][key];

View File

@ -1,6 +1,14 @@
#include "LedDeviceUdpRaw.h"
// Constants
namespace {
const bool verbose = false;
const ushort RAW_DEFAULT_PORT=5568;
const int UDP_MAX_LED_NUM = 490;
} //End of constants
LedDeviceUdpRaw::LedDeviceUdpRaw(const QJsonObject &deviceConfig)
: ProviderUdp(deviceConfig)
@ -16,8 +24,28 @@ bool LedDeviceUdpRaw::init(const QJsonObject &deviceConfig)
{
_port = RAW_DEFAULT_PORT;
bool isInitOK = false;
if ( LedDevice::init(deviceConfig) )
{
// Initialise LedDevice configuration and execution environment
int configuredLedCount = this->getLedCount();
Debug(_log, "DeviceType : %s", QSTRING_CSTR( this->getActiveDeviceType() ));
Debug(_log, "LedCount : %d", configuredLedCount);
Debug(_log, "ColorOrder : %s", QSTRING_CSTR( this->getColorOrder() ));
Debug(_log, "LatchTime : %d", this->getLatchTime());
if (configuredLedCount > UDP_MAX_LED_NUM)
{
QString errorReason = QString("Device type %1 can only be run with maximum %2 LEDs!").arg(this->getActiveDeviceType()).arg(UDP_MAX_LED_NUM);
this->setInError ( errorReason );
isInitOK = false;
}
else
{
// Initialise sub-class
bool isInitOK = ProviderUdp::init(deviceConfig);
isInitOK = ProviderUdp::init(deviceConfig);
}
}
return isInitOK;
}
@ -27,3 +55,18 @@ int LedDeviceUdpRaw::write(const std::vector<ColorRgb> &ledValues)
return writeBytes(_ledRGBCount, dataPtr);
}
QJsonObject LedDeviceUdpRaw::getProperties(const QJsonObject& params)
{
DebugIf(verbose, _log, "params: [%s]", QString(QJsonDocument(params).toJson(QJsonDocument::Compact)).toUtf8().constData() );
QJsonObject properties;
QJsonObject propertiesDetails;
propertiesDetails.insert("maxLedCount", UDP_MAX_LED_NUM);
properties.insert("properties", propertiesDetails);
DebugIf(verbose, _log, "properties: [%s]", QString(QJsonDocument(properties).toJson(QJsonDocument::Compact)).toUtf8().constData() );
return properties;
}

View File

@ -26,6 +26,14 @@ public:
///
static LedDevice* construct(const QJsonObject &deviceConfig);
///
/// @brief Get a UDP-Raw device's resource properties
///
/// @param[in] params Parameters to query device
/// @return A JSON structure holding the device's properties
///
QJsonObject getProperties(const QJsonObject& params) override;
protected:
///

View File

@ -21,6 +21,7 @@ const char CONFIG_SYNC_OVERWRITE[] = "overwriteSync";
// UDP elements
const quint16 STREAM_DEFAULT_PORT = 19446;
const int UDP_MAX_LED_NUM = 490;
// WLED JSON-API elements
const int API_DEFAULT_PORT = -1; //Use default port per communication scheme
@ -81,6 +82,13 @@ bool LedDeviceWled::init(const QJsonObject &deviceConfig)
Debug(_log, "ColorOrder : %s", QSTRING_CSTR( this->getColorOrder() ));
Debug(_log, "LatchTime : %d", this->getLatchTime());
if (configuredLedCount > UDP_MAX_LED_NUM)
{
QString errorReason = QString("Device type %1 can only be run with maximum %2 LEDs!").arg(this->getActiveDeviceType()).arg(UDP_MAX_LED_NUM);
this->setInError ( errorReason );
return false;
}
_isRestoreOrigState = _devConfig[CONFIG_RESTORE_STATE].toBool(DEFAULT_IS_RESTORE_STATE);
_isSyncOverwrite = _devConfig[CONFIG_SYNC_OVERWRITE].toBool(DEFAULT_IS_SYNC_OVERWRITE);
_isBrightnessOverwrite = _devConfig[CONFIG_BRIGHTNESS_OVERWRITE].toBool(DEFAULT_IS_BRIGHTNESS_OVERWRITE);
@ -348,7 +356,10 @@ QJsonObject LedDeviceWled::getProperties(const QJsonObject& params)
Warning (_log, "%s get properties failed with error: '%s'", QSTRING_CSTR(_activeDeviceType), QSTRING_CSTR(response.getErrorReason()));
}
properties.insert("properties", response.getBody().object());
QJsonObject propertiesDetails = response.getBody().object();
propertiesDetails.insert("maxLedCount", UDP_MAX_LED_NUM);
properties.insert("properties", propertiesDetails);
DebugIf(verbose, _log, "properties: [%s]", QString(QJsonDocument(properties).toJson(QJsonDocument::Compact)).toUtf8().constData() );
}