mirror of
https://github.com/hyperion-project/hyperion.ng.git
synced 2025-03-01 10:33:28 +00:00
update .json with current dev stage (#58)
* cleanup: remove ambiled device as written at the forum this is no longer supported. All people should move to adalight. They just need to flash a new sketch. * fix typo * travis.ci * travis: move to ubuntu 14.04 * script try * add serialport * update .json files * . * . * .
This commit is contained in:
brindosch
GitHub
@@ -7,14 +7,14 @@
|
||||
/// Device configuration contains the following fields:
|
||||
/// * 'name' : The user friendly name of the device (only used for display purposes)
|
||||
/// * 'type' : The type of the device or leds (known types for now are
|
||||
/// APA102, WS2801, P9813, LPD6803, LPD8806, ---------PWM---------, WS2812b (just RPi1), WS281X (RPi1, RPi2, RPi3), --------OTHER--------, PhilipsHUE, AtmoOrb, PiBlaster, Tinkerforge, FadeCandy, RawHID (USB), UDP, SEDU, TPM2, USBASP-WS2801, USBASP-WS2812, ------3rd PARTY------, Adalight, AdalightAPA102, AmbiLed, Atmo, Lightpack, Multi-Lightpack, Paintpack, Test (file), None)
|
||||
/// APA102, WS2801, P9813, LPD6803, LPD8806, ---------PWM---------, WS2812b (just RPi1), WS281X (RPi1, RPi2, RPi3), --------OTHER--------, PhilipsHUE, AtmoOrb, PiBlaster, Tinkerforge, FadeCandy, RawHID (USB), UDP, SEDU, TPM2, USBASP-WS2801, USBASP-WS2812, ------3rd PARTY------, Adalight, AdalightAPA102, Atmo, Lightpack, Multi-Lightpack, Paintpack, Test (file), None)
|
||||
/// * [device type specific configuration]
|
||||
/// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.).
|
||||
"device" :
|
||||
{
|
||||
"name" : "MyHyperionConfig",
|
||||
"type" : "ws2801",
|
||||
"output" : "/dev/spidev0.0",
|
||||
"type" : "file",
|
||||
"output" : "/dev/null",
|
||||
"rate" : 1000000,
|
||||
"colorOrder" : "rgb"
|
||||
},
|
||||
@@ -134,134 +134,6 @@
|
||||
}
|
||||
},
|
||||
|
||||
/// The black border configuration, contains the following items:
|
||||
/// * enable : true if the detector should be activated
|
||||
/// * threshold : Value below which a pixel is regarded as black (value between 0.0 and 1.0)
|
||||
/// * unknownFrameCnt : Number of frames without any detection before the border is set to 0 (default 600)
|
||||
/// * borderFrameCnt : Number of frames before a consistent detected border gets set (default 50)
|
||||
/// * maxInconsistentCnt : Number of inconsistent frames that are ignored before a new border gets a chance to proof consistency
|
||||
/// * blurRemoveCnt : Number of pixels that get removed from the detected border to cut away blur (default 1)
|
||||
/// * mode : Border detection mode (values=default,classic,osd)
|
||||
"blackborderdetector" :
|
||||
{
|
||||
"enable" : true,
|
||||
"threshold" : 0.0,
|
||||
"unknownFrameCnt" : 600,
|
||||
"borderFrameCnt" : 50,
|
||||
"maxInconsistentCnt" : 10,
|
||||
"blurRemoveCnt" : 1,
|
||||
"mode" : "default"
|
||||
},
|
||||
|
||||
/// The configuration of the effect engine, contains the following items:
|
||||
/// * paths : An array with absolute/relative location(s) of directories with effects
|
||||
"effects" :
|
||||
{
|
||||
"paths" :
|
||||
[
|
||||
"/usr/share/hyperion/effects"
|
||||
]
|
||||
},
|
||||
|
||||
/// Boot sequence configuration. Start effect / set color at startup of hyperion
|
||||
/// HINT inital background color is not shown, when any other grabber is active
|
||||
/// * color : Set initial background color on startup -> set effect to "" (empty) and input the values [R,G,B] and set duration_ms NOT to 0 (use 1) instead
|
||||
/// * effect : The effect is shown when hyperion starts
|
||||
/// * duration_ms : The duration of the selected effect (0=endless)
|
||||
/// * priority : The priority of the selected effect/initial background color (default=990, if duration is 0)
|
||||
/// when duration > 0 => priority is set to 0, otherwise priority is set to configured value
|
||||
/// HINT: lower value result in HIGHER priority!
|
||||
"bootsequence" :
|
||||
{
|
||||
"color" : [0,0,0],
|
||||
"effect" : "Rainbow swirl fast",
|
||||
"duration_ms" : 3000,
|
||||
"priority" : 990
|
||||
},
|
||||
|
||||
/// Configuration of webserver integrated in hyperion.
|
||||
/// * enable : enable the server or not
|
||||
/// * document_root : path to hyperion webapp files
|
||||
/// * port : the port where hyperion webapp is accasible
|
||||
"webConfig" :
|
||||
{
|
||||
"enable" : true,
|
||||
"document_root" : "/usr/share/hyperion/webconfig",
|
||||
"port" : 8099
|
||||
},
|
||||
|
||||
/// The configuration of the Json/Proto forwarder. Forward messages to multiple instances of Hyperion on same and/or other hosts
|
||||
/// 'proto' is mostly used for video streams and 'json' for effects
|
||||
/// * proto : Proto server adress and port of your target. Syntax:[IP:PORT] -> ["127.0.0.1:19447"] or more instances to forward ["127.0.0.1:19447","192.168.0.24:19449"]
|
||||
/// * json : Json server adress and port of your target. Syntax:[IP:PORT] -> ["127.0.0.1:19446"] or more instances to forward ["127.0.0.1:19446","192.168.0.24:19448"]
|
||||
/// HINT:If you redirect to "127.0.0.1" (localhost) you could start a second hyperion with another device/led config!
|
||||
/// Be sure your client(s) is/are listening on the configured ports. The second Hyperion (if used) also needs to be configured! (HyperCon -> External -> Json Server/Proto Server)
|
||||
"forwarder" :
|
||||
{
|
||||
"proto" : ["127.0.0.1:19447"],
|
||||
"json" : ["127.0.0.1:19446"]
|
||||
},
|
||||
|
||||
/// The configuration for the frame-grabber, contains the following items:
|
||||
/// * width : The width of the grabbed frames [pixels]
|
||||
/// * height : The height of the grabbed frames [pixels]
|
||||
/// * frequency_Hz : The frequency of the frame grab [Hz]
|
||||
/// * priority : The priority of the frame-gabber (Default=890) HINT: lower value result in HIGHER priority!
|
||||
/// * ATTENTION : Power-of-Two resolution is not supported and leads to unexpected behaviour!
|
||||
"framegrabber" :
|
||||
{
|
||||
"width" : 64,
|
||||
"height" : 64,
|
||||
"frequency_Hz" : 10.0,
|
||||
"priority" : 890
|
||||
},
|
||||
|
||||
/// The configuration of the Kodi connection used to enable and disable the frame-grabber. Contains the following fields:
|
||||
/// * xbmcAddress : The IP address of the Kodi-host
|
||||
/// * xbmcTcpPort : The TCP-port of the Kodi-server
|
||||
/// * grabVideo : Flag indicating that the frame-grabber is on(true) during video playback
|
||||
/// * grabPictures : Flag indicating that the frame-grabber is on(true) during picture show
|
||||
/// * grabAudio : Flag indicating that the frame-grabber is on(true) during audio playback
|
||||
/// * grabMenu : Flag indicating that the frame-grabber is on(true) at the Kodi menu
|
||||
/// * grabPause : Flag indicating that the frame-grabber is on(true) at player state "pause"
|
||||
/// * grabScreensaver : Flag indicating that the frame-grabber is on(true) when Kodi is on screensaver
|
||||
/// * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing
|
||||
"xbmcVideoChecker" :
|
||||
{
|
||||
"xbmcAddress" : "127.0.0.1",
|
||||
"xbmcTcpPort" : 9090,
|
||||
"grabVideo" : true,
|
||||
"grabPictures" : true,
|
||||
"grabAudio" : true,
|
||||
"grabMenu" : false,
|
||||
"grabPause" : false,
|
||||
"grabScreensaver" : true,
|
||||
"enable3DDetection" : true
|
||||
},
|
||||
|
||||
/// The configuration of the Json server which enables the json remote interface
|
||||
/// * port : Port at which the json server is started
|
||||
"jsonServer" :
|
||||
{
|
||||
"port" : 19444
|
||||
},
|
||||
|
||||
/// The configuration of the Proto server which enables the protobuffer remote interface
|
||||
/// * port : Port at which the protobuffer server is started
|
||||
"protoServer" :
|
||||
{
|
||||
"port" : 19445
|
||||
},
|
||||
|
||||
/// The configuration of the boblight server which enables the boblight remote interface
|
||||
/// * port : Port at which the boblight server is started
|
||||
/// * priority : Priority of the boblight server (Default=900) HINT: lower value result in HIGHER priority!
|
||||
"boblightServer" :
|
||||
{
|
||||
"port" : 19333,
|
||||
"priority" : 900
|
||||
},
|
||||
|
||||
/// Configuration for the embedded V4L2 grabber
|
||||
/// * device : V4L2 Device to use [default="/dev/video0"]
|
||||
/// * input : V4L2 input to use [default=0]
|
||||
@@ -299,6 +171,155 @@
|
||||
"blueSignalThreshold" : 0.0
|
||||
},
|
||||
|
||||
/// The configuration for the frame-grabber, contains the following items:
|
||||
/// * width : The width of the grabbed frames [pixels]
|
||||
/// * height : The height of the grabbed frames [pixels]
|
||||
/// * frequency_Hz : The frequency of the frame grab [Hz]
|
||||
/// * priority : The priority of the frame-gabber (Default=890) HINT: lower value result in HIGHER priority!
|
||||
/// * ATTENTION : Power-of-Two resolution is not supported and leads to unexpected behaviour!
|
||||
"framegrabber" :
|
||||
{
|
||||
"width" : 64,
|
||||
"height" : 64,
|
||||
"frequency_Hz" : 10.0,
|
||||
"priority" : 890
|
||||
},
|
||||
|
||||
/// The black border configuration, contains the following items:
|
||||
/// * enable : true if the detector should be activated
|
||||
/// * threshold : Value below which a pixel is regarded as black (value between 0.0 and 1.0)
|
||||
/// * unknownFrameCnt : Number of frames without any detection before the border is set to 0 (default 600)
|
||||
/// * borderFrameCnt : Number of frames before a consistent detected border gets set (default 50)
|
||||
/// * maxInconsistentCnt : Number of inconsistent frames that are ignored before a new border gets a chance to proof consistency
|
||||
/// * blurRemoveCnt : Number of pixels that get removed from the detected border to cut away blur (default 1)
|
||||
/// * mode : Border detection mode (values=default,classic,osd)
|
||||
"blackborderdetector" :
|
||||
{
|
||||
"enable" : true,
|
||||
"threshold" : 0.0,
|
||||
"unknownFrameCnt" : 600,
|
||||
"borderFrameCnt" : 50,
|
||||
"maxInconsistentCnt" : 10,
|
||||
"blurRemoveCnt" : 1,
|
||||
"mode" : "default"
|
||||
},
|
||||
|
||||
/// The configuration of the Kodi connection used to enable and disable the frame-grabber. Contains the following fields:
|
||||
/// * xbmcAddress : The IP address of the Kodi-host
|
||||
/// * xbmcTcpPort : The TCP-port of the Kodi-server
|
||||
/// * grabVideo : Flag indicating that the frame-grabber is on(true) during video playback
|
||||
/// * grabPictures : Flag indicating that the frame-grabber is on(true) during picture show
|
||||
/// * grabAudio : Flag indicating that the frame-grabber is on(true) during audio playback
|
||||
/// * grabMenu : Flag indicating that the frame-grabber is on(true) at the Kodi menu
|
||||
/// * grabPause : Flag indicating that the frame-grabber is on(true) at player state "pause"
|
||||
/// * grabScreensaver : Flag indicating that the frame-grabber is on(true) when Kodi is on screensaver
|
||||
/// * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing
|
||||
"xbmcVideoChecker" :
|
||||
{
|
||||
"xbmcAddress" : "127.0.0.1",
|
||||
"xbmcTcpPort" : 9090,
|
||||
"grabVideo" : true,
|
||||
"grabPictures" : true,
|
||||
"grabAudio" : true,
|
||||
"grabMenu" : false,
|
||||
"grabPause" : false,
|
||||
"grabScreensaver" : true,
|
||||
"enable3DDetection" : true
|
||||
},
|
||||
|
||||
/// Initial Effect sets a "booteffect" or "color" (foreground-effect) and optional set a "effect" or "color" during inactive grabbers and network receivers (background-effect)
|
||||
/// * background-effect : 2 options: set a effect (example: "Rainbow swirl fast") or set a color (RGB) (example: [255,134,0])
|
||||
/// * background-effect-args : Set optional effect arguments (Have a look at the select effect to get the possible values)
|
||||
/// * foreground-effect : 2 options: set a effect (example: "Rainbow swirl fast") or set a color (RGB) (example: [255,134,0])
|
||||
/// * foreground-effect-args : Set optional effect arguments (Have a look at the select effect to get the possible values)
|
||||
/// * foreground-duration_ms : The duration of the selected foreground-effect or color (0=endless)
|
||||
/// HINT: "foreground-effect" starts always with priority 0, so it blocks all remotes and grabbers if the loop is endless
|
||||
/// HINT: Set a empty value if you want to disable a component (example: "")
|
||||
"initialEffect" :
|
||||
{
|
||||
"background-effect" : "Full color mood blobs",
|
||||
"background-effect-args" : {},
|
||||
"foreground-effect" : "Rainbow swirl fast",
|
||||
"foreground-effect-args" : {},
|
||||
"foreground-duration_ms" : 3000
|
||||
},
|
||||
|
||||
/// The configuration of the Json/Proto forwarder. Forward messages to multiple instances of Hyperion on same and/or other hosts
|
||||
/// 'proto' is mostly used for video streams and 'json' for effects
|
||||
/// * proto : Proto server adress and port of your target. Syntax:[IP:PORT] -> ["127.0.0.1:19447"] or more instances to forward ["127.0.0.1:19447","192.168.0.24:19449"]
|
||||
/// * json : Json server adress and port of your target. Syntax:[IP:PORT] -> ["127.0.0.1:19446"] or more instances to forward ["127.0.0.1:19446","192.168.0.24:19448"]
|
||||
/// HINT:If you redirect to "127.0.0.1" (localhost) you could start a second hyperion with another device/led config!
|
||||
/// Be sure your client(s) is/are listening on the configured ports. The second Hyperion (if used) also needs to be configured! (HyperCon -> External -> Json Server/Proto Server)
|
||||
"forwarder" :
|
||||
{
|
||||
"proto" : ["127.0.0.1:19447"],
|
||||
"json" : ["127.0.0.1:19446"]
|
||||
},
|
||||
|
||||
/// The configuration of the Json server which enables the json remote interface
|
||||
/// * port : Port at which the json server is started
|
||||
"jsonServer" :
|
||||
{
|
||||
"port" : 19444
|
||||
},
|
||||
|
||||
/// The configuration of the Proto server which enables the protobuffer remote interface
|
||||
/// * port : Port at which the protobuffer server is started
|
||||
"protoServer" :
|
||||
{
|
||||
"port" : 19445
|
||||
},
|
||||
|
||||
/// The configuration of the boblight server which enables the boblight remote interface
|
||||
/// * enable : Enable or disable the boblight server (true/false)
|
||||
/// * port : Port at which the boblight server is started
|
||||
/// * priority : Priority of the boblight server (Default=800) HINT: lower value result in HIGHER priority!
|
||||
"boblightServer" :
|
||||
{
|
||||
"enable" : false,
|
||||
"port" : 19333,
|
||||
"priority" : 800
|
||||
},
|
||||
|
||||
/// The configuration of the udp listener
|
||||
/// * enable : Enable or disable the udp listener (true/false)
|
||||
/// * address : The listener address, pre configured is multicast which listen also to unicast ip addresses at the same time. If emtpy, multicast is disabled and it also accepts unicast from all IPs
|
||||
/// * port : Port at which the udp listener starts
|
||||
/// * priority : Priority of the udp lstener server (Default=800)
|
||||
/// * timeout : The timeout sets the timelimit for a "soft" off of the udp listener, if no packages are received (for example to switch to a gabber or InitialEffect - background-effect)
|
||||
/// * shared : If true, the udp listener is shared across all hyperion instances (if using more than one (forwarder))
|
||||
"udpListener" :
|
||||
{
|
||||
"enable" : false,
|
||||
"address" : "239.255.28.01",
|
||||
"port" : 2801,
|
||||
"priority" : 800,
|
||||
"timeout" : 10000,
|
||||
"shared" : false
|
||||
},
|
||||
|
||||
/// Configuration of the Hyperion webserver
|
||||
/// * enable : enable ir disable the webserver (true/false)
|
||||
/// * document_root : path to hyperion webapp files
|
||||
/// * port : the port where hyperion webapp is accasible
|
||||
"webConfig" :
|
||||
{
|
||||
"enable" : true,
|
||||
"document_root" : "/usr/share/hyperion/webconfig",
|
||||
"port" : 8099
|
||||
},
|
||||
|
||||
/// The configuration of the effect engine, contains the following items:
|
||||
/// * paths : An array with absolute/relative location(s) of directories with effects
|
||||
"effects" :
|
||||
{
|
||||
"paths" :
|
||||
[
|
||||
"/storage/hyperion/effects",
|
||||
"/usr/share/hyperion/effects"
|
||||
]
|
||||
},
|
||||
|
||||
/// The configuration for each individual led. This contains the specification of the area
|
||||
/// averaged of an input image for each led to determine its color. Each item in the list
|
||||
/// contains the following fields:
|
||||
@@ -308,6 +329,7 @@
|
||||
/// (minimum and maximum inclusive)
|
||||
/// * vscan: The fractional part of the image along the vertical used for the averaging
|
||||
/// (minimum and maximum inclusive)
|
||||
|
||||
"leds" :
|
||||
[
|
||||
{
|
||||
|
||||
Reference in New Issue
Block a user