"general_wiki_moreto":"More information about \"$1\" is available at our",
"general_wiki_moreto":"More informations to \"$1\" at our Wiki",
"dashboard_label_intro":"This dashboard gives you a quick overview of your Hyperion installation and shows you the latest news from the Hyperion Blog.",
"dashboard_label_intro":"The dashboard give you a quick overview about the status of Hyperion and show you the latest news of the Hyperion Blog.",
"conf_general_inst_desc":"Use multiple LED hardware setups at the same time. Each instance runs independently which allows you to set different LED layouts and calibration settings. Running instances can be selected from the icon in the top menu bar",
"conf_general_inst_desc":"Use different LED hardware at the same time. Each instance runs independent of each other which allows different LED layouts and calibration settings. Running instances are available at the top icon bar",
"conf_effect_path_intro":"Load effects from the defined paths. Additional you can disable single effects by name to hide them from all effect lists.",
"conf_effect_path_intro":"Load effects from the defined paths. Additional you can disable single effects by name to hide them from all effect lists.",
"conf_effect_fgeff_intro":"Define a boot effect or colour, which will be shown during Hyperion start-up, for the defined duration.",
"conf_effect_fgeff_intro":"Define a booteffect or color, which is shown during Hyperion startup for the defined duration.",
"conf_effect_bgeff_intro":"Define a background effect/colour, which is shown during Hyperion \"idle\". Always starts with a channel priority of 255.",
"conf_effect_bgeff_intro":"Define a background effect/color, which is shown during Hyperion \"idle\". Sarts always with priority channel 255.",
"conf_leds_device_intro":"Hyperion supports a lot of controllers to transmit data to your target device. Select a LED controller out of the sorted list and configure it. We have chosen the best default settings for each device.",
"conf_leds_device_intro":"Hyperion supports a lot of controllers to transmit data to your target device. Select a LED controller out of the sorted list and configure it. We have chosen the best default settings for each device.",
"conf_leds_layout_intro":"You also need a led layout, which reflects your led positions. The classic layout is a tv frame, but we also support led matrix (led walls) creation. The view on this layout is ALWAYS of the FRONT of your TV.",
"conf_leds_layout_intro":"You need also a led layout, which reflects your led positions. The classic layout is the usual used tv frame, but we also support led matrix (led walls) creation. The view on this layout is ALWAYS of the FRONT of your TV.",
"conf_leds_layout_checkp1":"The black led is your first led, the first led is the point where you input your data signal.",
"conf_leds_layout_checkp1":"The black led is your first led, the first led is the point where you input your data signal.",
"conf_leds_layout_checkp2":"The layout is always the front view of your TV, never the back view.",
"conf_leds_layout_checkp2":"The layout is always the front view of your TV, never the back view.",
"conf_leds_layout_checkp3":"Make sure the direction is right. The grey leds indicate led number 2 and 3 to help visualize the data direction.",
"conf_leds_layout_checkp3":"Make sure the direction is right. The grey leds indicate led number 2 and 3 to visualize the data direction.",
"conf_leds_layout_checkp4":"Case Gap: To create a gap, ignore it when you define Top/Bottom/Left/Right and afterwards set your gap length to remove an amount of leds. Modify the gap position until it matches the gap location in your setup.",
"conf_leds_layout_checkp4":"Case Gap: To create a gap, ignore it first when you define Top/Bottom/Left/Right and set afterwards your gap length to remove a amount of leds. Modify the gap position until it matches.",
"conf_leds_layout_textf1":"This textfield shows (by default) your current loaded layout and will be overwritten if you generate a new one with the options above. Optional you could perform further edits.",
"conf_leds_layout_textf1":"This textfield shows by default your current loaded layout and will be overwritten if you generate a new one with the options above. Optional you could perform further edits.",
"conf_grabber_fg_intro":"Platform capture is your local system, captured as an input source.",
"conf_grabber_fg_intro":"Platforum capture is your local system capture as input source, Hyperion is installed on.",
"conf_grabber_v4l_intro":"USB capture uses a capture device connected via USB to this system to input source images for processing.",
"conf_grabber_v4l_intro":"USB capture is a (capture)device connected via USB which is used to input source pictures for processing.",
"conf_colors_color_intro":"Create one or more calibration profiles, adjust each colour, brightness, linearization and more.",
"conf_colors_color_intro":"Create one or more calibration profiles, adjust each color, brightness, linearization and more.",
"conf_colors_smoothing_intro":"Smoothing flattens colour/brightness changes to reduce annoying distraction.",
"conf_colors_smoothing_intro":"Smoothing flattens color/brightness changes to reduce annoying distraction.",
"conf_colors_blackborder_intro":"Skip black bars wherever they are. Each mode uses a different detection algorithm which is tuned for special situations. Higher the threshold if it doesn't work for you.",
"conf_colors_blackborder_intro":"Skip black bars wherever they are. Each mode use another detection algorithm which is tuned for special situations. Higher the threshold if it doesn't work for you.",
"conf_network_net_intro":"Network related settings which are applied to all network services.",
"conf_network_net_intro":"Network related settings which are applied to all network services.",
"conf_network_json_intro":"The JSON-RPC-Port of all Hyperion instances, used for remote control.",
"conf_network_json_intro":"The JSON-RPC-Port of all Hyperion instances, used for remote control.",
"conf_network_bobl_intro":"Receiver for Boblight",
"conf_network_bobl_intro":"Receiver for Boblight",
"conf_network_fbs_intro":"Google Flatbuffers Receiver. Used for fast image transmission.",
"conf_network_fbs_intro":"Google Flatbuffers Receiver. Used for fast image transmission.",
"conf_network_proto_intro":"The PROTO-Port of all Hyperion instances, used for picture streams (HyperionScreenCap, Kodi Addon, Android Hyperion Grabber, ...)",
"conf_network_proto_intro":"The PROTO-Port of all Hyperion instances, used for picture streams (HyperionScreenCap, Kodi Addon, Android Hyperion Grabber, ...)",
"conf_network_forw_intro":"Forward all input to a second Hyperion instance which could be driven by another led controller",
"conf_network_forw_intro":"Forward all input to a second Hyperion instance which could be driven with another led controller",
"conf_network_tok_title":"Token Management",
"conf_network_tok_title":"Token Management",
"conf_network_tok_desc":"Tokens grant other applications access to the Hyperion API, an application can request a token which you will need to accept or you can create them yourself below. These tokens are required when \"API Authorization\" is enabled in network settings.",
"conf_network_tok_desc":"Tokens grant other applications access to the Hyperion API, an application can request a token where you need to accept it or you create them on your own below. These tokens are just required when \"API Authorization\" is enabled in network settings.",
"remote_adjustment_intro":"Modify colour/brightness/compensation during runtime. $1",
"remote_adjustment_intro":"Modifiy color/brightness/compensation during runtime. $1",
"remote_videoMode_label":"Video mode",
"remote_videoMode_label":"Video mode",
"remote_videoMode_intro":"Switch between different video modes to enjoy 3D movies! All capture devices are supported. $1",
"remote_videoMode_intro":"Switch between different video modes to enjoy 3D movies! Supported are all capture devices. $1",
"remote_videoMode_3DSBS":"3DSBS",
"remote_videoMode_3DSBS":"3DSBS",
"remote_videoMode_3DTAB":"3DTAB",
"remote_videoMode_3DTAB":"3DTAB",
"remote_videoMode_2D":"2D",
"remote_videoMode_2D":"2D",
"remote_input_label":"Source Selection",
"remote_input_label":"Source Selection",
"remote_input_intro":"Hyperion uses a priority system to select a source. Everything you set has a priority (Effect/Colour/Platform capture/USB capture and network sources). By default, Hyperion will select a source based on its priority (lowest number reflects the current active source). Now you have the opportunity to select sources on your own. $1",
"remote_input_intro":"Hyperion uses a priority system to select a source. Everything you set has a priority (Effect/Color/Platform capture/USB capture and network sources). By default, Hyperion select sources depending on priority (lowest number reflects the current active source). Now you have the opportunity to select sources on your own. $1",
"remote_input_label_autoselect":"Auto Selection",
"remote_input_label_autoselect":"Auto Selection",
"remote_input_setsource_btn":"Select a Source",
"remote_input_setsource_btn":"Select Source",
"remote_input_sourceactiv_btn":"Source Active",
"remote_input_sourceactiv_btn":"Source active",
"remote_input_origin":"Origin",
"remote_input_origin":"Origin",
"remote_input_owner":"Type",
"remote_input_owner":"Type",
"remote_input_priority":"Priority",
"remote_input_priority":"Priority",
"remote_input_status":"Status/Action",
"remote_input_status":"Status/Action",
"remote_input_duration":"Duration:",
"remote_input_duration":"Duration:",
"remote_input_ip":"IP:",
"remote_input_ip":"IP:",
"remote_input_clearall":"Clear all Effects/Colours",
"remote_input_clearall":"Clear all Effects/Colors",
"remote_components_label":"Components control",
"remote_components_label":"Components control",
"remote_components_intro":"Enable and disable components of Hyperion during runtime. $1",
"remote_components_intro":"Enable and disable components of Hyperion during runtime. $1",
"remote_optgroup_usreffets":"User Effects",
"remote_optgroup_usreffets":"User Effects",
"remote_optgroup_syseffets":"Provided Effects",
"remote_optgroup_syseffets":"Provided Effects",
"remote_maptype_label":"Mapping type",
"remote_maptype_label":"Mapping type",
"remote_maptype_intro":"Usually the led layout is responsible for setting the picture area the leds display, you could change it here. $1.",
"remote_maptype_intro":"Usually the led layout is responsible which led has a specific picture area, you could change it here. $1.",
"effectsconfigurator_label_intro":"Create new custom effects (based on the built in ones) which you can tune to your liking. There are different options available such as colour, speed and direction depending on the base effect you choose.",
"effectsconfigurator_label_intro":"Create out of the base effects new effects that are tuned to your liking. Depending on Effect there are options like color, speed, direction and more available.",
"InfoDialog_access_text":"Depending on the settings level you will be able to adjust more options or get access to more features. Recommended is the \"Default\" level.",
"InfoDialog_access_text":"Depending on settings level you could adjust more options or get access to more features. Recommended is the \"Default\" level.",
"infoDialog_import_confirm_text":"Are you sure want to import \"$1\"? This process can't be reverted!",
"infoDialog_import_confirm_text":"Are you sure to import \"$1\"? This process can't be reverted!",
"InfoDialog_iswitch_title":"Hyperion switcher",
"InfoDialog_iswitch_title":"Hyperion switcher",
"InfoDialog_iswitch_text":"If you run more than one Hyperion Instance on your local network, you can switch between the web configurations. Select the Hyperion instance the want to control below and switch!",
"InfoDialog_iswitch_text":"If you run Hyperion more than once in your local network, you could switch between the web configurations. Select the Hyperion instance below and switch!",
"wiz_wizavail":"Wizard available",
"wiz_wizavail":"Wizard available",
"wiz_guideyou":"The $1 will guide you through the settings. Just press the button!",
"wiz_guideyou":"The $1 will guide you through the settings. Just press the button!",
"wiz_rgb_title":"RGB Byte Order Wizard",
"wiz_rgb_title":"RGB Byte Order Wizard",
"wiz_rgb_intro1":"This wizard will guide you through the process of finding the correct coluor order for your leds. Click on continue to begin.",
"wiz_rgb_intro1":"This wizard will guide you through the finding process of the correct color order for your leds. Click on continue to begin.",
"wiz_rgb_intro2":"When do you need this wizard? Example: You set the colour red, but you get green or blue. You can also use it for first time configuration.",
"wiz_rgb_intro2":"When do you need this wizard? Example: You set the color red, but you get green or blue. You could also use it for first configuration.",
"wiz_rgb_expl":"The coloured dot will change colour (red, green) every x seconds, at the same time your leds switch to that colour. Answer the questions at the bottom to check/correct your byte order.",
"wiz_rgb_expl":"The color dot switches every x seconds the color (red, green), at the same time your leds switch the color too. Answer the questions at the bottom to check/correct your byte order.",
"wiz_rgb_switchevery":"Switch colour every...",
"wiz_rgb_switchevery":"Switch color every...",
"wiz_rgb_q":"Which colour does your setup show, when the coloured dot above shows...",
"wiz_rgb_q":"Which color show your leds, when the color dot above shows...",
"wiz_rgb_qrend":"...red?",
"wiz_rgb_qrend":"...red?",
"wiz_rgb_qgend":"...green?",
"wiz_rgb_qgend":"...green?",
"wiz_hue_title":"Philips Hue Wizard",
"wiz_hue_title":"Philips Hue Wizard",
@ -367,8 +367,8 @@
"wiz_hue_searchb":"Searching for bridge...",
"wiz_hue_searchb":"Searching for bridge...",
"wiz_hue_blinkblue":"Let ID $1 light up blue",
"wiz_hue_blinkblue":"Let ID $1 light up blue",
"wiz_hue_ident":"Identify",
"wiz_hue_ident":"Identify",
"wiz_cc_title":"Colour calibration wizard",
"wiz_cc_title":"Color calibration wizard",
"wiz_cc_intro1":"This wizard will guide you through your led calibration. If you are using Kodi, the calibration pictures and videos can be sent directly to it without further actions on your side. If not, you will need to download these files yourself and display them when the wizard needs you to adjust the setting.",
"wiz_cc_intro1":"This wizard will guide you through your led calibration. If you are using Kodi, the calibration pictures and videos can be send directly to kodi without further tasks on your side. If not, you need to download these files yourself and apply them, if the wizard wants it.",
"wiz_cc_kwebs":"Kodi webserver (IP:Port)",
"wiz_cc_kwebs":"Kodi webserver (IP:Port)",
"wiz_cc_kodidiscon":"Kodi webserver not found, proceed without Kodi support.",
"wiz_cc_kodidiscon":"Kodi webserver not found, proceed without Kodi support.",
"wiz_cc_kodidisconlink":"Download link pictures:",
"wiz_cc_kodidisconlink":"Download link pictures:",
@ -377,20 +377,20 @@
"wiz_cc_kodishould":"Kodi should show the following picture: $1",
"wiz_cc_kodishould":"Kodi should show the following picture: $1",
"wiz_cc_lettvshow":"Let your TV show the following picture: $1",
"wiz_cc_lettvshow":"Let your TV show the following picture: $1",
"wiz_cc_lettvshowm":"Check this with the following pictures: $1",
"wiz_cc_lettvshowm":"Check this with the following pictures: $1",
"wiz_cc_adjustit":"Adjust your \"$1\", until you are happy with it. Take notice: The more you adjust away from the default value will reduce the available colour spectrum (This also effects the colours in between). Depending on your TV/LED colour spectrum, your results may vary.",
"wiz_cc_adjustit":"Adjust your \"$1\", until your are fine with it. Take notice: The more you adjust away from the default value the color spectrum will be limited (Also for all colors in between). Depending on TV/LED color spectrum the results will vary.",
"wiz_cc_adjustgamma":"Gamma: What you have to do is, adjust gamma levels of each channel until you have the same perceived amount for each channel. Hint: Neutral is 1.0! For example, if your Grey is a bit reddish it means that you have to increase red gamma to reduce the amount of red (the more gamma, the less amount of color).",
"wiz_cc_adjustgamma":"Gamma: What you have to do is, adjust gamma levels of each channel until you have the same perceived amount of each channel. Hint: Neutral is 1.0! For example, if your Grey is a bit reddish it means that you have to increase red gamma to reduce the amount of red (the more gamma, the less amount of color).",
"wiz_cc_chooseid":"Define a name for this colour profile.",
"wiz_cc_chooseid":"Define a name for this color profile.",
"wiz_cc_btn_switchpic":"Switch picture",
"wiz_cc_btn_switchpic":"Switch picture",
"wiz_cc_backlight":"Additionally you could define a backlight to sort out \"bad colors\" in nearly dark areas or if you don't like to switch between colour and off during watching. You also have the option to define a specific colour to use as a backlight. This is disabled during the state \"Off\" ,\"Color\" and \"Effect\".",
"wiz_cc_backlight":"Additional you could define a backlight to sort out \"bad colors\" on nearly dark areas or if you don't like the switch between color and off during watching. Additional you could define if there should be some color in it or just white. This is disabled during the state \"Off\" ,\"Color\" and \"Effect\".",
"wiz_cc_testintro":"Time for a real test!",
"wiz_cc_testintro":"Time for a real test!",
"wiz_cc_testintrok":"Click the button below to start a test video.",
"wiz_cc_testintrok":"Push on a button below to start a test video.",
"wiz_cc_testintrowok":"Check out the following link to download test videos:",
"wiz_cc_testintrowok":"Check out the following link to download test videos:",
"wiz_cc_link":"Click me!",
"wiz_cc_link":"Click me!",
"wiz_cc_morethanone":"You have more than one profile, please choose the profile you want to calibrate.",
"wiz_cc_morethanone":"You have more than one profile, please choose the profile you want to calibrate.",
"wiz_cc_btn_stop":"Stop video",
"wiz_cc_btn_stop":"Stop video",
"wiz_cc_summary":"A culmination of your settings. During video playback, you can adjust these values to see their effects. When you are happy, click on save.",
"wiz_cc_summary":"A conclusion of your settings. During video playback, you could change or test values again. If you are done, click on save.",
"edt_conf_color_channelAdjustment_header_expl":"Create colour profiles that could be assigned to a specific component. Adjust color, gamma, brightness, compensation and more.",
"edt_conf_color_channelAdjustment_header_expl":"Create color profiles that could be assigned to a specific component. Adjust color, gamma, brightness, compensation and more.",
"edt_conf_color_imageToLedMappingType_title":"Led area assignment",
"edt_conf_color_imageToLedMappingType_title":"Led area assignment",
"edt_conf_color_imageToLedMappingType_expl":"Overwrites the led area assignment of your led layout if it's not \"multicolor\"",
"edt_conf_color_imageToLedMappingType_expl":"Overwrites the led area assignment of your led layout if it's not \"multicolor\"",
"edt_conf_color_brightnessComp_expl":"Compensates for brightness differences between red, green, blue, cyan, magenta, yellow and white. 100 means full compensation, 0 means no compensation",
"edt_conf_color_brightnessComp_expl":"Compensates bightness differences between red green blue, cyan magenta yellow and white. 100 means full compensation, 0 no compensation",
"edt_conf_v4l2_signalDetection_expl":"If enabled, USB capture will be temporarily disabled when no signal is found. This will happen when the picture falls below the threshold value for a period of 4 seconds.",
"edt_conf_v4l2_signalDetection_expl":"If enabled, usb capture will be temporarily disabled when no signal was found. This will happen when the picture fall below the threshold value for a period of 4 seconds.",
"edt_conf_v4l2_redSignalThreshold_title":"Red signal threshold",
"edt_conf_v4l2_redSignalThreshold_title":"Red signal threshold",
"edt_conf_v4l2_redSignalThreshold_expl":"Darkens low red values (recognized as black)",
"edt_conf_v4l2_redSignalThreshold_expl":"Darkens low red values (recognized as black)",
"edt_conf_v4l2_greenSignalThreshold_title":"Green signal threshold",
"edt_conf_v4l2_greenSignalThreshold_title":"Green signal threshold",
@ -581,39 +580,39 @@
"edt_conf_fg_type_title":"Type",
"edt_conf_fg_type_title":"Type",
"edt_conf_fg_type_expl":"Type of platform capture, default is 'auto'",
"edt_conf_fg_type_expl":"Type of platform capture, default is 'auto'",
"edt_conf_net_ipWhitelist_expl":"You can whitelist specific IP addresses instead of allowing all connections from the internet to connect to the Hyperion API/Webinterface.",
"edt_conf_net_ipWhitelist_expl":"You can whitelist IP addresses instead allowing all connections from internet to connect to the Hyperion API/Webinterface.",
"edt_conf_net_apiAuth_expl":"Enforce all applications that use the Hyperion API to authenticate themselves against Hyperion (Exception see \"Local API Authentication\"). Higher security, as you control the access and can revoke it at any time.",
"edt_conf_net_apiAuth_expl":"Enforce all applications that use the Hyperion API to authenticate themself against Hyperion (Exception see \"Local API Authentication\"). Higher security, as you control the access and revoke it at any time.",
"edt_conf_net_localApiAuth_title":"Local API Authentication",
"edt_conf_net_localApiAuth_title":"Local API Authentication",
"edt_conf_net_localApiAuth_expl":"When enabled, connections from your home network needs to authenticate themselves by using a token.",
"edt_conf_net_localApiAuth_expl":"When enabled, connections from your home network needs to authenticate themself against Hyperion with a token.",
"edt_conf_net_localAdminAuth_title":"Local Admin API Authentication",
"edt_conf_net_localAdminAuth_title":"Local Admin API Authentication",
"edt_conf_net_localAdminAuth_expl":"When enabled, administration access from your home network needs a password.",
"edt_conf_net_localAdminAuth_expl":"When enabled, administration access from your home network needs a password.",
"edt_conf_net_restirctedInternetAccessAPI_title":"Restrict to IP's",
"edt_conf_net_restirctedInternetAccessAPI_title":"Restrict to IP's",
"edt_conf_net_restirctedInternetAccessAPI_expl":"You can restrict access to the API through the internet to specific IP's.",
"edt_conf_net_restirctedInternetAccessAPI_expl":"You can restrict the access to the API through the internet to certain IP's.",
"edt_conf_webc_keyPassPhrase_expl":"Optional: The key might be protected with a password",
"edt_conf_webc_keyPassPhrase_expl":"Optional: The key might be protected with a password",
"edt_conf_effp_heading_title":"Effect Paths",
"edt_conf_effp_heading_title":"Effect Paths",
"edt_conf_effp_paths_title":"Effect Path(s)",
"edt_conf_effp_paths_title":"Effect Path(s)",
"edt_conf_effp_paths_expl":"You can define folders that contain additional effects. The effect configurator will default to saving in the first folder .",
"edt_conf_effp_paths_expl":"You could define more folders that contain effects. The effect configurator will always save inside the first folder.",
"edt_conf_effp_paths_itemtitle":"Path",
"edt_conf_effp_paths_itemtitle":"Path",
"edt_conf_effp_disable_title":"Disabled Effects",
"edt_conf_effp_disable_title":"Disabled Effects",
"edt_conf_effp_disable_expl":"Add the names of the effects you would like to disable/hide from all effect lists.",
"edt_conf_effp_disable_expl":"Add effect names here to disable/hide them from all effect lists.",
"edt_conf_effp_disable_itemtitle":"Effect",
"edt_conf_effp_disable_itemtitle":"Effect",
"edt_conf_log_heading_title":"Logging",
"edt_conf_log_heading_title":"Logging",
"edt_conf_log_level_title":"Log-Level",
"edt_conf_log_level_title":"Log-Level",
"edt_conf_log_level_expl":"You will see more or less information depending on the set logging level you have set.",
"edt_conf_log_level_expl":"Depending on loglevel you see less or more messages in your log.",
"edt_eff_knightrider_header_desc":"K.I.T.T is back! The front-scanner of the well-known car, this time not just in red.",
"edt_eff_knightrider_header_desc":"K.I.T.T is back! The front-scanner of the wellknown car, this time not just in red.",
"edt_eff_lightclock_header":"Light Clock",
"edt_eff_lightclock_header":"Light Clock",
"edt_eff_lightclock_header_desc":"A real clock as light! Adjust the colours of hours, minute, seconds. A optional 3/6/9/12 o'clock marker is also available. In case the clock is wrong, you need to check your system clock.",
"edt_eff_lightclock_header_desc":"A real clock as light! Adjsut the colors of hours, minute, seconds. A optional 3/6/9/12 o'clock marker is also available. In case the clock is wrong, you need to check your system clock.",
"edt_eff_pacman_header":"Pac-Man",
"edt_eff_pacman_header":"Pac-Man",
"edt_eff_pacman_header_desc":"Small hungry and yellow. Who will survive?",
"edt_eff_pacman_header_desc":"Small hungry and yellow. Who will survive?",
"edt_eff_moodblobs_header":"Mood Blobs",
"edt_eff_moodblobs_header":"Mood Blobs",
"edt_eff_moodblobs_header_desc":"Relax at the evening with slow moving and colour changing blobs.",
"edt_eff_moodblobs_header_desc":"Relax at the evening with slow moving and color changing blobs.",
"edt_eff_swirl_header":"Colour Swirl",
"edt_eff_swirl_header":"Color Swirl",
"edt_eff_swirl_header_desc":"A swirl of custom colours. Colours are evenly spread over 360°, with the colours inbetween the selected ones calculated automatically. You can also add a second swirl on top of the first, but be aware that you need partial transparency! Hint: A repeat of the same colour results in a \"larger\" colour area and a reduced colour shift area.",
"edt_eff_swirl_header_desc":"A swirl with custom colors. Colors are even spread to 360°, in between colors shifts will be calcualted. Additional you can add a second swirl on top, be aware that you need partly transparency! Hint: A reapeat of the same color results in a \"hugher\" color area and a reduced color shift area.",
"edt_eff_systemshutdown_header_desc":"A short animation mimicking a real system shutdown",
"edt_eff_systemshutdown_header_desc":"A short animation with probably a real system shutdown",
"edt_eff_snake_header":"Snake",
"edt_eff_snake_header":"Snake",
"edt_eff_snake_header_desc":"Looking for something to eat?",
"edt_eff_snake_header_desc":"Where is something to eat?",
"edt_eff_sparks_header":"Sparks",
"edt_eff_sparks_header":"Sparks",
"edt_eff_sparks_header_desc":"Star-Sparkling, choose between a static colour or random. You could also adjust brightness, saturation and speed.",
"edt_eff_sparks_header_desc":"Star-Sparking, choose between a static color or random. You could also adjust brightness, staturation and speed.",
"edt_eff_traces_header":"Colour Traces",
"edt_eff_traces_header":"Color Traces",
"edt_eff_traces_header_desc":"Requires a redesign",
"edt_eff_traces_header_desc":"Requires redesign",
"edt_eff_x-mas_header":"X-Mas",
"edt_eff_x-mas_header":"X-Mas",
"edt_eff_x-mas_header_desc":"Touch of Christmas",
"edt_eff_x-mas_header_desc":"Touch of christmas",
"edt_eff_trails_header":"Falling stars",
"edt_eff_trails_header":"Falling stars",
"edt_eff_trails_header_desc":"Coloured stars that fall from top to bottom",
"edt_eff_trails_header_desc":"Colored stars that fall from top to bottom",
"edt_eff_flag_header":"Flags",
"edt_eff_flag_header":"Flags",
"edt_eff_flag_header_desc":"Let your leds shine bright in the colours of your country. You can select more than one flag and they will change based on the interval time.",
"edt_eff_flag_header_desc":"Let your leds shine bright in the colours of your country. You can select more than one flag and they will change based on the interval time.",
"edt_eff_collision_header":"colour collision",
"edt_eff_collision_header":"colour collision",
@ -716,11 +715,11 @@
"edt_eff_enum_all-together":"All together",
"edt_eff_enum_all-together":"All together",
"edt_eff_enum_list":"LED List",
"edt_eff_enum_list":"LED List",
"edt_eff_count":"Count",
"edt_eff_count":"Count",
"edt_eff_color":"Colour",
"edt_eff_color":"Color",
"edt_eff_colorrandom":"Random colour",
"edt_eff_colorrandom":"Random color",
"edt_eff_colorone":"Colour one",
"edt_eff_colorone":"Color one",
"edt_eff_colortwo":"Colour two",
"edt_eff_colortwo":"Color two",
"edt_eff_colorcount":"Colour length",
"edt_eff_colorcount":"Color length",
"edt_eff_rotationtime":"Rotation time",
"edt_eff_rotationtime":"Rotation time",
"edt_eff_sleeptime":"Sleep time",
"edt_eff_sleeptime":"Sleep time",
"edt_eff_image":"Image file",
"edt_eff_image":"Image file",
@ -730,31 +729,31 @@
"edt_eff_fadeouttime":"Fade out time",
"edt_eff_fadeouttime":"Fade out time",
"edt_eff_repeat":"Repeat",
"edt_eff_repeat":"Repeat",
"edt_eff_repeatcount":"Repeat count",
"edt_eff_repeatcount":"Repeat count",
"edt_eff_colorendtime":"Time to hold the start colour",
"edt_eff_colorendtime":"Time to hold start color",
"edt_eff_colorstarttime":"Time to hold the end colour",
"edt_eff_colorstarttime":"Time to hold end color",
Ben Williams
GitHub