frodovdr/hyperion.ng
1
0
Fork 0
mirror of https://github.com/hyperion-project/hyperion.ng.git synced 2023-10-10 13:36:59 +02:00
Code Issues Releases Wiki Activity

Merge pull request #5 from tvdzwan/master

Browse Source 
Merging again

Former-commit-id: 83dfa4a4aafbcb8c3bb8818fa22bcab453861824
This commit is contained in:
penfold42 2016-03-12 11:55:56 +11:00
commit 614ffac421
60 changed files with 969 additions and 423 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
.gitmodules vendored
View File

@ -1,3 +1,6 @@
[submodule "dependencies/external/protobuf"]
path = dependencies/external/protobuf
url = https://github.com/tvdzwan/protobuf.git
[submodule "dependencies/external/rpi_ws281x"]
path = dependencies/external/rpi_ws281x
url = https://github.com/jgarff/rpi_ws281x

5
CMakeLists.txt
View File

@ -34,6 +34,9 @@ message(STATUS "ENABLE_V4L2 = " ${ENABLE_V4L2})
option(ENABLE_WS2812BPWM "Enable the WS2812b-PWM device" OFF)
message(STATUS "ENABLE_WS2812BPWM = " ${ENABLE_WS2812BPWM})
option(ENABLE_WS281XPWM "Enable the WS281x-PWM device" OFF)
message(STATUS "ENABLE_WS281XPWM = " ${ENABLE_WS281XPWM})
option(ENABLE_X11 "Enable the X11 grabber" OFF)
message(STATUS "ENABLE_X11 = " ${ENABLE_X11})
@ -102,7 +105,7 @@ find_package(Qt5 COMPONENTS Core Gui Widgets Network REQUIRED)
# set(CMAKE_CXX_FLAGS "-fPIC")
else(ENABLE_QT5)
# Configure the use of QT4
find_package(Qt4 COMPONENTS QtCore QtGui QtNetwork REQUIRED QUIET)
find_package(Qt4 COMPONENTS QtCore QtNetwork QtGui REQUIRED QUIET)
endif(ENABLE_QT5)
#add libusb and pthreads

12
CompileHowto.txt
View File

@ -14,7 +14,7 @@ sudo cp -R "$FIRMWARE_DIR/hardfp/opt/" /opt
export HYPERION_DIR="hyperion"
git clone --recursive https://github.com/tvdzwan/hyperion.git "$HYPERION_DIR"
# if you forget the --resursive in above statement or you are updating an existing clone you need
# if you forget the --recursive in above statement or you are updating an existing clone you need
# to clone the protobuf submodule by runnning the follwing two statements:
git submodule init
git submodule update
@ -29,10 +29,16 @@ cmake -DCMAKE_BUILD_TYPE=Release -Wno-dev ..
cmake -DENABLE_DISPMANX=OFF -DENABLE_SPIDEV=OFF -DENABLE_X11=ON -DCMAKE_BUILD_TYPE=Release -Wno-dev ..
# as an alternative for the dispmanx grabber on non-rpi devices (e.g. cubox-i) you could try the framebuffer grabber
cmake -DENABLE_DISPMANX=OFF -DENABLE_SPIDEV=OFF -DENABLE_FB=ON -DCMAKE_BUILD_TYPE=Release -Wno-dev ..
# for OSX build you need XCode, qt4 libraries and cmake. You can use macport (homebrew might work too) to install them
# for OSX build you need XCode, qt4 libraries and cmake (maybe libusb too). You can use macport or homebrew(recommended) to install them:
#for port:
sudo port install qt4-mac
sudo port install cmake
cmake -DENABLE_DISPMANX=OFF -DENABLE_SPIDEV=OFF -DENABLE_V4L2=OFF -DENABLE_OSX=ON .
#sudo port install libusb
#for brew:
sudo brew install qt4-mac
sudo brew install cmake
#sudo brew install libusb
cmake -DENABLE_DISPMANX=OFF -DENABLE_SPIDEV=OFF -DENABLE_V4L2=OFF -DENABLE_OSX=ON ..
# run make to build Hyperion
make

2
CrossCompileHowto.txt
View File

@ -16,7 +16,7 @@ export NATIVE_BUILD_DIR="$HYPERION_DIR/build"
export TARGET_BUILD_DIR=HYPERION_DIR="$HYPERION_DIR/build-rpi"
# install required packages
sudo apt-get install git rsync cmake build-essential libQt4-dev libusb-1.0-0-dev python-dev
sudo apt-get install git rsync cmake build-essential libQt4-dev libusb-1.0-0-dev python-dev libxrender-dev
sudo apt-get install git rsync cmake ia32-libs protobuf-compiler
# On newer version of Ubuntu (and maybe other distros) the ia32-libs is not available, the following

3
HyperionConfig.h.in
View File

@ -12,6 +12,9 @@
// Define to enable the ws2812b-pwm-device
#cmakedefine ENABLE_WS2812BPWM
// Define to enable the ws281x-pwm-via-dma-device using jgarff's library
#cmakedefine ENABLE_WS281XPWM
// Define to enable the spi-device
#cmakedefine ENABLE_TINKERFORGE

8
ISSUE_TEMPLATE Normal file
View File

@ -0,0 +1,8 @@
**Please provide some information that we could help as fast as possible.
Please check the wiki in case your problem is already known/feature requested.**
**1.** Used hardware and sofware (Wetek,RPi1,Rpi2,... Ubuntu 14.04(64bit),OSX,OpenELEC,OSMC,XBian,...)
**2.** Your LED device and additional hardware (if used) (WS2801,APA102,WS2812B,... connected through (direct,arduino uno,...))
**3.** Please upload your Hyperion log to pastebin.com and insert the link. Have a look at the wiki how you get one.
**4.** Please upload your "Hyperion Configuration File" to www.jsoneditoronline.org and insert the link.

4
PULL_REQUEST_TEMPLATE Normal file
View File

@ -0,0 +1,4 @@
**1.** Tell us something about your changes.
**2.** If this changes affect the .conf file. Please provide the changed section
**3.** Reference a issue (optional)

0
deploy/hyperion-remote.sh → bin/hyperion-remote.sh
View File

6
bin/hyperion.initctl.sh
View File

@ -8,10 +8,4 @@ stop on (runlevel [!2345])
respawn
pre-start script
#comment out the following 2 lines for x32/64
modprobe spidev
/usr/bin/gpio2spi
end script
exec /usr/bin/hyperiond /etc/hyperion.config.json

0
deploy/hyperiond.sh → bin/hyperiond.sh
View File

7
config/hyperion.config.json
View File

@ -141,11 +141,13 @@
/// * width : The width of the grabbed frames [pixels]
/// * height : The height of the grabbed frames [pixels]
/// * frequency_Hz : The frequency of the frame grab [Hz]
/// * priority : The priority
"framegrabber" :
{
"width" : 80,
"height" : 45,
"frequency_Hz" : 10.0
"frequency_Hz" : 10.0,
"priority" : 900
},
/// The configuration of the Kodi connection used to enable and disable the frame-grabber. Contains the following fields:
@ -187,7 +189,8 @@
/// * port : Port at which the boblight server is started
// "boblightServer" :
// {
// "port" : 19333
// "port" : 19333,
// "priority" : 900
// },
/// Configuration for the embedded V4L2 grabber

18
config/hyperion_x86.config.json
View File

@ -391,19 +391,20 @@
"color" : [0,0,0],
"effect" : "Rainbow swirl fast",
"duration_ms" : 3000,
"priority" : 900
"priority" : 990
},
/// The configuration for the frame-grabber, contains the following items:
/// * width : The width of the grabbed frames [pixels]
/// * height : The height of the grabbed frames [pixels]
/// * frequency_Hz : The frequency of the frame grab [Hz]
// "framegrabber" :
// {
// "width" : 64,
// "height" : 64,
// "frequency_Hz" : 10.0
// },
/// "framegrabber" :
/// {
/// "width" : 64,
/// "height" : 64,
/// "frequency_Hz" : 10.0,
/// "priority" : 900
/// },
/// The configuration of the XBMC connection used to enable and disable the frame-grabber. Contains the following fields:
/// * xbmcAddress : The IP address of the XBMC-host
@ -444,7 +445,8 @@
/// * port : Port at which the boblight server is started
// "boblightServer" :
// {
// "port" : 19333
// "port" : 19333,
// "priority" : 900
// },
"endOfJson" : "endOfJson"

7
dependencies/CMakeLists.txt vendored
View File

@ -4,6 +4,13 @@ add_subdirectory(build/jsoncpp)
add_subdirectory(build/serial)
add_subdirectory(build/tinkerforge)
if(ENABLE_WS281XPWM)
add_library(ws281x
external/rpi_ws281x/mailbox.c external/rpi_ws281x/ws2811.c
external/rpi_ws281x/pwm.c external/rpi_ws281x/dma.c
external/rpi_ws281x/rpihw.c)
endif(ENABLE_WS281XPWM)
if(ENABLE_PROTOBUF)
set(BUILD_SHARED_LIBS OFF CACHE BOOL "Build shared protobuf library")
add_subdirectory(external/protobuf)

1
dependencies/external/rpi_ws281x vendored Submodule

@ -0,0 +1 @@
Subproject commit 34c917e25044a7aca4f6dc9326c48c1474b8f28c

1
deploy/HyperCon.jar.REMOVED.git-id
View File

@ -1 +0,0 @@
0074a4390b1d8d0c87488a3e7a13ec372786d140

17
deploy/hyperion.conf
View File

@ -1,17 +0,0 @@
## Hyperion daemon
description "hyperion"
author "poljvd & tvdzwan"
start on (runlevel [2345])
stop on (runlevel [!2345])
respawn
pre-start script
modprobe spidev
/usr/bin/gpio2spi
end script
exec /usr/bin/hyperiond /etc/hyperion.config.json

16
deploy/hyperion.xbian.conf
View File

@ -1,16 +0,0 @@
## Hyperion daemon
description "hyperion"
author "poljvd & tvdzwan"
start on (runlevel [2345])
stop on (runlevel [!2345])
respawn
pre-start script
modprobe spi-bcm2708
end script
exec /usr/bin/hyperiond /etc/hyperion.config.json

114
deploy/update_hyperion.sh
View File

@ -1,114 +0,0 @@
#!/bin/sh
# Script for downloading and installing the latest Hyperion release
# Make sure /sbin is on the path (for service to find sub scripts)
PATH="/sbin:$PATH"
# Find out if we are on OpenElec
OS_OPENELEC=`cat /etc/issue | grep -m 1 OpenELEC | wc -l`
# Find out if its an imx6 device
CPU_RPI=`cat /proc/cpuinfo | grep RPI | wc -l`
CPU_IMX6=`cat /proc/cpuinfo | grep i.MX6 | wc -l`
CPU_WETEK=`cat /proc/cpuinfo | grep Amlogic | wc -l`
CPU_X64=`uname -m | grep x86_64 | wc -l`
CPU_X32=`uname -m | grep x86_32 | wc -l`
# Check that we have a known configuration
if [[ $CPU_RPI -ne 1 && $CPU_IMX6 -ne 1 && $CPU_WETEK -ne 1 && $CPU_X64 -ne 1 && $CPU_X32 -ne 1 ]]; then
echo 'CPU information does not match any known releases'
exit
fi
# check which init script we should use
USE_INITCTL=`which /sbin/initctl | wc -l`
USE_SERVICE=`which /usr/sbin/service | wc -l`
# Make sure that the boblight daemon is no longer running
BOBLIGHT_PROCNR=$(pidof boblightd | wc -l)
if [ $BOBLIGHT_PROCNR -eq 1 ]; then
echo 'Found running instance of boblight. Please stop boblight via XBMC menu before installing hyperion'
exit
fi
# Stop hyperion daemon if it is running
# Start the hyperion daemon
if [ $USE_INITCTL -eq 1 ]; then
/sbin/initctl stop hyperion
elif [ $USE_SERVICE -eq 1 ]; then
/usr/sbin/service hyperion stop
fi
# Select the appropriate release
HYPERION_ADDRESS=https://raw.githubusercontent.com/tvdzwan/hyperion/master/deploy
if [ $CPU_RPI -eq 1 ]; then
HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_rpi.tar.gz
OE_DEPENDECIES=$HYPERION_ADDRESS/hyperion.deps.openelec-rpi.tar.gz
elif [ $CPU_IMX6 -eq 1 ]; then
HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_imx6.tar.gz
OE_DEPENDECIES=$HYPERION_ADDRESS/hyperion.deps.openelec-imx6.tar.gz
elif [ $CPU_WETEK -eq 1 ]; then
HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_wetek.tar.gz
OE_DEPENDECIES=$HYPERION_ADDRESS/hyperion.deps.openelec-rpi.tar.gz
elif [ $CPU_X64 -eq 1 ]; then
HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_x64.tar.gz
OE_DEPENDECIES=$HYPERION_ADDRESS/hyperion.deps.openelec-x64.tar.gz
elif [ $CPU_X32 -eq 1 ]; then
HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_x32.tar.gz
OE_DEPENDECIES=$HYPERION_ADDRESS/hyperion.deps.openelec-x32.tar.gz
else
echo "Target platform unknown"
exit
fi
# Get and extract the Hyperion binaries and effects
echo 'Downloading hyperion'
if [ $OS_OPENELEC -eq 1 ]; then
# OpenELEC has a readonly file system. Use alternative location
curl -L --get $HYPERION_RELEASE | tar -C /storage -xz
curl -L --get $OE_DEPENDECIES | tar -C /storage/hyperion/bin -xz
# modify the default config to have a correct effect path
sed -i 's:/opt:/storage:g' /storage/hyperion/config/hyperion.config.json
# /storage/.config is available as samba share. A symbolic link would not be working
false | cp -i /storage/hyperion/config/hyperion.config.json /storage/.config/hyperion.config.json 2>/dev/null
else
wget $HYPERION_RELEASE -O - | tar -C /opt -xz
# create links to the binaries
ln -fs /opt/hyperion/bin/hyperiond /usr/bin/hyperiond
ln -fs /opt/hyperion/bin/hyperion-remote /usr/bin/hyperion-remote
ln -fs /opt/hyperion/bin/hyperion-v4l2 /usr/bin/hyperion-v4l2
# Copy a link to the hyperion configuration file to /etc
ln -s /opt/hyperion/config/hyperion.config.json /etc/hyperion.config.json
fi
# Copy the service control configuration to /etc/int
if [ $USE_INITCTL -eq 1 ]; then
echo 'Installing initctl script'
wget -N https://raw.githubusercontent.com/tvdzwan/hyperion/master/deploy/hyperion.conf -P /etc/init/
initctl reload-configuration
elif [ $USE_SERVICE -eq 1 ]; then
echo 'Installing startup script in init.d'
# place startup script in init.d and add it to upstart
ln -fs /opt/hyperion/init.d/hyperion.init.sh /etc/init.d/hyperion
chmod +x /etc/init.d/hyperion
update-rc.d hyperion defaults 98 02
elif [ $OS_OPENELEC -eq 1 ]; then
# only add to start script if hyperion is not present yet
if [ `cat /storage/.config/autostart.sh 2>/dev/null | grep hyperiond | wc -l` -eq 0 ]; then
echo 'Adding Hyperion to autostart script'
echo "/storage/hyperion/bin/hyperiond.sh /storage/.config/hyperion.config.json > /dev/null 2>&1 &" >> /storage/.config/autostart.sh
chmod +x /storage/.config/autostart.sh
fi
fi
# Start the hyperion daemon
if [ $USE_INITCTL -eq 1 ]; then
/sbin/initctl start hyperion
elif [ $USE_SERVICE -eq 1 ]; then
/usr/sbin/service hyperion start
fi

5
include/boblightserver/BoblightServer.h
View File

@ -25,7 +25,7 @@ public:
/// @param hyperion Hyperion instance
/// @param port port number on which to start listening for connections
///
BoblightServer(Hyperion * hyperion, uint16_t port = 19333);
BoblightServer(Hyperion * hyperion, const int priority, uint16_t port = 19333);
~BoblightServer();
///
@ -54,4 +54,7 @@ private:
/// List with open connections
QSet<BoblightClientConnection *> _openConnections;
/// hyperion priority
const int _priority;
};

2
include/grabber/AmlogicWrapper.h
View File

@ -33,7 +33,7 @@ public:
/// @param[in] updateRate_Hz The image grab rate [Hz]
/// @param[in] hyperion The instance of Hyperion used to write the led values
///
AmlogicWrapper(const unsigned grabWidth, const unsigned grabHeight, const unsigned updateRate_Hz, Hyperion * hyperion);
AmlogicWrapper(const unsigned grabWidth, const unsigned grabHeight, const unsigned updateRate_Hz, const int priority, Hyperion * hyperion);
///
/// Destructor of this dispmanx frame grabber. Releases any claimed resources.

2
include/grabber/DispmanxWrapper.h
View File

@ -33,7 +33,7 @@ public:
/// @param[in] updateRate_Hz The image grab rate [Hz]
/// @param[in] hyperion The instance of Hyperion used to write the led values
///
DispmanxWrapper(const unsigned grabWidth, const unsigned grabHeight, const unsigned updateRate_Hz, Hyperion * hyperion);
DispmanxWrapper(const unsigned grabWidth, const unsigned grabHeight, const unsigned updateRate_Hz, const int priority, Hyperion * hyperion);
///
/// Destructor of this dispmanx frame grabber. Releases any claimed resources.

0
libsrc/grabber/framebuffer/FramebufferFrameGrabber.h → include/grabber/FramebufferFrameGrabber.h
View File

2
include/grabber/FramebufferWrapper.h
View File

@ -33,7 +33,7 @@ public:
/// @param[in] updateRate_Hz The image grab rate [Hz]
/// @param[in] hyperion The instance of Hyperion used to write the led values
///
FramebufferWrapper(const std::string & device, const unsigned grabWidth, const unsigned grabHeight, const unsigned updateRate_Hz, Hyperion * hyperion);
FramebufferWrapper(const std::string & device, const unsigned grabWidth, const unsigned grabHeight, const unsigned updateRate_Hz, const int priority, Hyperion * hyperion);
///
/// Destructor of this framebuffer frame grabber. Releases any claimed resources.

0
libsrc/grabber/osx/OsxFrameGrabber.h → include/grabber/OsxFrameGrabber.h
View File

2
include/grabber/OsxWrapper.h
View File

@ -34,7 +34,7 @@ public:
/// @param[in] updateRate_Hz The image grab rate [Hz]
/// @param[in] hyperion The instance of Hyperion used to write the led values
///
OsxWrapper(const unsigned display, const unsigned grabWidth, const unsigned grabHeight, const unsigned updateRate_Hz, Hyperion * hyperion);
OsxWrapper(const unsigned display, const unsigned grabWidth, const unsigned grabHeight, const unsigned updateRate_Hz, const int priority, Hyperion * hyperion);
///
/// Destructor of this osx frame grabber. Releases any claimed resources.

4
libsrc/boblightserver/BoblightClientConnection.cpp
View File

@ -21,14 +21,14 @@
// project includes
#include "BoblightClientConnection.h"
BoblightClientConnection::BoblightClientConnection(QTcpSocket *socket, Hyperion * hyperion) :
BoblightClientConnection::BoblightClientConnection(QTcpSocket *socket, const int priority, Hyperion * hyperion) :
QObject(),
_locale(QLocale::C),
_socket(socket),
_imageProcessor(ImageProcessorFactory::getInstance().newImageProcessor()),
_hyperion(hyperion),
_receiveBuffer(),
_priority(255),
_priority(priority),
_ledColors(hyperion->getLedCount(), ColorRgb::BLACK)
{
// initalize the locale. Start with the default C-locale

2
libsrc/boblightserver/BoblightClientConnection.h
View File

@ -26,7 +26,7 @@ public:
/// @param socket The Socket object for this connection
/// @param hyperion The Hyperion server
///
BoblightClientConnection(QTcpSocket * socket, Hyperion * hyperion);
BoblightClientConnection(QTcpSocket * socket, const int priority, Hyperion * hyperion);
///
/// Destructor

7
libsrc/boblightserver/BoblightServer.cpp
View File

@ -5,11 +5,12 @@
#include <boblightserver/BoblightServer.h>
#include "BoblightClientConnection.h"
BoblightServer::BoblightServer(Hyperion *hyperion, uint16_t port) :
BoblightServer::BoblightServer(Hyperion *hyperion, const int priority,uint16_t port) :
QObject(),
_hyperion(hyperion),
_server(),
_openConnections()
_openConnections(),
_priority(priority)
{
if (!_server.listen(QHostAddress::Any, port))
{
@ -39,7 +40,7 @@ void BoblightServer::newConnection()
if (socket != nullptr)
{
std::cout << "New boblight connection" << std::endl;
BoblightClientConnection * connection = new BoblightClientConnection(socket, _hyperion);
BoblightClientConnection * connection = new BoblightClientConnection(socket, _priority, _hyperion);
_openConnections.insert(connection);
// register slot for cleaning up after the connection closed

4
libsrc/grabber/amlogic/AmlogicWrapper.cpp
View File

@ -12,10 +12,10 @@
#include <grabber/AmlogicGrabber.h>
AmlogicWrapper::AmlogicWrapper(const unsigned grabWidth, const unsigned grabHeight, const unsigned updateRate_Hz, Hyperion * hyperion) :
AmlogicWrapper::AmlogicWrapper(const unsigned grabWidth, const unsigned grabHeight, const unsigned updateRate_Hz, const int priority, Hyperion * hyperion) :
_updateInterval_ms(1000/updateRate_Hz),
_timeout_ms(2 * _updateInterval_ms),
_priority(999),
_priority(priority),
_timer(),
_image(grabWidth, grabHeight),
_frameGrabber(new AmlogicGrabber(grabWidth, grabHeight)),

4
libsrc/grabber/dispmanx/DispmanxWrapper.cpp
View File

@ -12,10 +12,10 @@
#include <grabber/DispmanxFrameGrabber.h>
DispmanxWrapper::DispmanxWrapper(const unsigned grabWidth, const unsigned grabHeight, const unsigned updateRate_Hz, Hyperion * hyperion) :
DispmanxWrapper::DispmanxWrapper(const unsigned grabWidth, const unsigned grabHeight, const unsigned updateRate_Hz, const int priority, Hyperion * hyperion) :
_updateInterval_ms(1000/updateRate_Hz),
_timeout_ms(2 * _updateInterval_ms),
_priority(1000),
_priority(priority),
_timer(),
_image(grabWidth, grabHeight),
_frameGrabber(new DispmanxFrameGrabber(grabWidth, grabHeight)),

2
libsrc/grabber/framebuffer/CMakeLists.txt
View File

@ -13,7 +13,7 @@ SET(FramebufferGrabberQT_HEADERS
)
SET(FramebufferGrabberHEADERS
${CURRENT_SOURCE_DIR}/FramebufferFrameGrabber.h
${CURRENT_HEADER_DIR}/FramebufferFrameGrabber.h
)
SET(FramebufferGrabberSOURCES

2
libsrc/grabber/framebuffer/FramebufferFrameGrabber.cpp
View File

@ -10,7 +10,7 @@
#include <iostream>
// Local includes
#include "FramebufferFrameGrabber.h"
#include <grabber/FramebufferFrameGrabber.h>
FramebufferFrameGrabber::FramebufferFrameGrabber(const std::string & device, const unsigned width, const unsigned height) :
_fbfd(0),

6
libsrc/grabber/framebuffer/FramebufferWrapper.cpp
View File

@ -5,12 +5,12 @@
// Framebuffer grabber includes
#include <grabber/FramebufferWrapper.h>
#include "FramebufferFrameGrabber.h"
#include <grabber/FramebufferFrameGrabber.h>
FramebufferWrapper::FramebufferWrapper(const std::string & device, const unsigned grabWidth, const unsigned grabHeight, const unsigned updateRate_Hz, Hyperion * hyperion) :
FramebufferWrapper::FramebufferWrapper(const std::string & device, const unsigned grabWidth, const unsigned grabHeight, const unsigned updateRate_Hz, const int priority, Hyperion * hyperion) :
_updateInterval_ms(1000/updateRate_Hz),
_timeout_ms(2 * _updateInterval_ms),
_priority(1000),
_priority(priority),
_timer(),
_image(grabWidth, grabHeight),
_frameGrabber(new FramebufferFrameGrabber(device, grabWidth, grabHeight)),

2
libsrc/grabber/osx/CMakeLists.txt
View File

@ -8,7 +8,7 @@ SET(OsxGrabberQT_HEADERS
)
SET(OsxGrabberHEADERS
${CURRENT_SOURCE_DIR}/OsxFrameGrabber.h
${CURRENT_HEADER_DIR}/OsxFrameGrabber.h
)
SET(OsxGrabberSOURCES

2
libsrc/grabber/osx/OsxFrameGrabber.cpp
View File

@ -3,7 +3,7 @@
#include <iostream>
// Local includes
#include "OsxFrameGrabber.h"
#include <grabber/OsxFrameGrabber.h>
OsxFrameGrabber::OsxFrameGrabber(const unsigned display, const unsigned width, const unsigned height) :
_screenIndex(display),

6
libsrc/grabber/osx/OsxWrapper.cpp
View File

@ -5,12 +5,12 @@
// Osx grabber includes
#include <grabber/OsxWrapper.h>
#include "OsxFrameGrabber.h"
#include <grabber/OsxFrameGrabber.h>
OsxWrapper::OsxWrapper(const unsigned display, const unsigned grabWidth, const unsigned grabHeight, const unsigned updateRate_Hz, Hyperion * hyperion) :
OsxWrapper::OsxWrapper(const unsigned display, const unsigned grabWidth, const unsigned grabHeight, const unsigned updateRate_Hz, const int priority, Hyperion * hyperion) :
_updateInterval_ms(1000/updateRate_Hz),
_timeout_ms(2 * _updateInterval_ms),
_priority(1000),
_priority(priority),
_timer(),
_image(grabWidth, grabHeight),
_frameGrabber(new OsxFrameGrabber(display, grabWidth, grabHeight)),

16
libsrc/leddevice/CMakeLists.txt
View File

@ -97,6 +97,18 @@ SET(Leddevice_SOURCES
)
endif(ENABLE_WS2812BPWM)
if(ENABLE_WS281XPWM)
include_directories(../../dependencies/external/rpi_ws281x)
SET(Leddevice_HEADERS
${Leddevice_HEADERS}
${CURRENT_SOURCE_DIR}/LedDeviceWS281x.h
)
SET(Leddevice_SOURCES
${Leddevice_SOURCES}
${CURRENT_SOURCE_DIR}/LedDeviceWS281x.cpp
)
endif(ENABLE_WS281XPWM)
if(ENABLE_TINKERFORGE)
SET(Leddevice_HEADERS
${Leddevice_HEADERS}
@ -138,6 +150,10 @@ if(ENABLE_TINKERFORGE)
target_link_libraries(leddevice tinkerforge)
endif()
if(ENABLE_WS281XPWM)
target_link_libraries(leddevice ws281x)
endif()
if(APPLE)
target_link_libraries(leddevice hidapi-mac)
else()

20
libsrc/leddevice/LedDeviceFactory.cpp
View File

@ -42,6 +42,10 @@
#include "LedDeviceWS2812b.h"
#endif
#ifdef ENABLE_WS281XPWM
#include "LedDeviceWS281x.h"
#endif
LedDevice * LedDeviceFactory::construct(const Json::Value & deviceConfig)
{
std::cout << "Device configuration: " << deviceConfig << std::endl;
@ -175,7 +179,7 @@ LedDevice * LedDeviceFactory::construct(const Json::Value & deviceConfig)
device = deviceLightpack;
}
else if (type == "multi-lightpack")
else if (type == "multi-lightpack" || type == "multi_lightpack")
{
LedDeviceMultiLightpack* deviceLightpack = new LedDeviceMultiLightpack();
deviceLightpack->open();
@ -285,10 +289,22 @@ LedDevice * LedDeviceFactory::construct(const Json::Value & deviceConfig)
LedDeviceWS2812b * ledDeviceWS2812b = new LedDeviceWS2812b();
device = ledDeviceWS2812b;
}
#endif
#ifdef ENABLE_WS281XPWM
else if (type == "ws281x")
{
const int gpio = deviceConfig.get("gpio", 18).asInt();
const int leds = deviceConfig.get("leds", 12).asInt();
const uint32_t freq = deviceConfig.get("freq", (Json::UInt)800000ul).asInt();
const int dmanum = deviceConfig.get("dmanum", 5).asInt();
LedDeviceWS281x * ledDeviceWS281x = new LedDeviceWS281x(gpio, leds, freq, dmanum);
device = ledDeviceWS281x;
}
#endif
else
{
std::cout << "Unable to create device " << type << std::endl;
std::cout << "Error: Unknown/Unimplemented device " << type << std::endl;
// Unknown / Unimplemented device
}
return device;

19
libsrc/leddevice/LedDevicePhilipsHue.cpp
View File

@ -9,6 +9,7 @@
#include <QEventLoop>
#include <QNetworkReply>
#include <stdexcept>
#include <set>
bool operator ==(CiColor p1, CiColor p2) {
@ -254,11 +255,19 @@ void LedDevicePhilipsHue::saveStates(unsigned int nLights) {
// Use json parser to parse reponse.
Json::Reader reader;
Json::FastWriter writer;
// Create light ids if none supplied by the user.
// Read light ids if none have been supplied by the user.
if (lightIds.size() != nLights) {
lightIds.clear();
for (unsigned int i = 0; i < nLights; i++) {
lightIds.push_back(i + 1);
QByteArray response = get("lights");
Json::Value json;
if (!reader.parse(QString(response).toStdString(), json)) {
throw std::runtime_error("No lights found");
}
// Loop over all children.
for (Json::ValueIterator it = json.begin(); it != json.end() && lightIds.size() <= nLights; it++) {
int lightId = atoi(it.key().asCString());
lightIds.push_back(lightId);
std::cout << "LedDevicePhilipsHue::saveStates(nLights=" << nLights << "): found light with id " << lightId
<< "." << std::endl;
}
}
// Iterate lights.
@ -269,6 +278,8 @@ void LedDevicePhilipsHue::saveStates(unsigned int nLights) {
Json::Value json;
if (!reader.parse(QString(response).toStdString(), json)) {
// Error occured, break loop.
std::cerr << "LedDevicePhilipsHue::saveStates(nLights=" << nLights
<< "): got invalid response from light with id " << lightIds.at(i) << "." << std::endl;
break;
}
// Get state object values which are subject to change.

78
libsrc/leddevice/LedDeviceWS281x.cpp Normal file
View File

@ -0,0 +1,78 @@
#include <iostream>
#include "LedDeviceWS281x.h"
// Constructor
LedDeviceWS281x::LedDeviceWS281x(const int gpio, const int leds, const uint32_t freq, const int dmanum)
{
initialized = false;
led_string.freq = freq;
led_string.dmanum = dmanum;
led_string.channel[0].gpionum = gpio;
led_string.channel[0].invert = 0;
led_string.channel[0].count = leds;
led_string.channel[0].brightness = 255;
led_string.channel[0].strip_type = WS2811_STRIP_RGB;
led_string.channel[1].gpionum = 0;
led_string.channel[1].invert = 0;
led_string.channel[1].count = 0;
led_string.channel[1].brightness = 0;
led_string.channel[0].strip_type = WS2811_STRIP_RGB;
if (ws2811_init(&led_string) < 0) {
std::cout << "Unable to initialize ws281x library." << std::endl;
throw -1;
}
initialized = true;
}
// Send new values down the LED chain
int LedDeviceWS281x::write(const std::vector<ColorRgb> &ledValues)
{
if (!initialized)
return -1;
int idx = 0;
for (const ColorRgb& color : ledValues)
{
if (idx >= led_string.channel[0].count)
break;
led_string.channel[0].leds[idx++] = ((uint32_t)color.red << 16) + ((uint32_t)color.green << 8) + color.blue;
}
while (idx < led_string.channel[0].count)
led_string.channel[0].leds[idx++] = 0;
if (ws2811_render(&led_string))
return -1;
return 0;
}
// Turn off the LEDs by sending 000000's
// TODO Allow optional power switch out another gpio, if this code handles it can
// make it more likely we don't accidentally drive data into an off strip
int LedDeviceWS281x::switchOff()
{
if (!initialized)
return -1;
int idx = 0;
while (idx < led_string.channel[0].count)
led_string.channel[0].leds[idx++] = 0;
if (ws2811_render(&led_string))
return -1;
return 0;
}
// Destructor
LedDeviceWS281x::~LedDeviceWS281x()
{
if (initialized)
{
std::cout << "Shutdown WS281x PWM and DMA channel" << std::endl;
ws2811_fini(&led_string);
}
initialized = false;
}

43
libsrc/leddevice/LedDeviceWS281x.h Normal file
View File

@ -0,0 +1,43 @@
#ifndef LEDDEVICEWS281X_H_
#define LEDDEVICEWS281X_H_
#pragma once
#include <leddevice/LedDevice.h>
#include <ws2811.h>
class LedDeviceWS281x : public LedDevice
{
public:
///
/// Constructs the LedDevice for WS281x (one wire 800kHz)
///
/// @param gpio The gpio pin to use (BCM chip counting, default is 18)
/// @param leds The number of leds attached to the gpio pin
/// @param freq The target frequency for the data line, default is 800000
/// @param dmanum The DMA channel to use, default is 5
///
LedDeviceWS281x(const int gpio, const int leds, const uint32_t freq, int dmanum);
///
/// Destructor of the LedDevice, waits for DMA to complete and then cleans up
///
~LedDeviceWS281x();
///
/// Writes the led color values to the led-device
///
/// @param ledValues The color-value per led
/// @return Zero on succes else negative
///
virtual int write(const std::vector<ColorRgb> &ledValues);
/// Switch the leds off
virtual int switchOff();
private:
ws2811_t led_string;
bool initialized;
};
#endif /* LEDDEVICEWS281X_H_ */

12
src/CMakeLists.txt
View File

@ -3,15 +3,15 @@ add_subdirectory(hyperion-remote)
# The following clients depend on the protobuf library
if(ENABLE_PROTOBUF)
if (ENABLE_AMLOGIC)
add_subdirectory(hyperion-aml)
endif()
# Add the 'Video 4 Linux' grabber if it is enabled
if(ENABLE_V4L2)
add_subdirectory(hyperion-v4l2)
endif()
# Add the X11 grabber if it is enabled
if(ENABLE_X11)
add_subdirectory(hyperion-x11)
endif()
@ -20,4 +20,12 @@ if(ENABLE_PROTOBUF)
add_subdirectory(hyperion-dispmanx)
endif()
if(ENABLE_FB)
add_subdirectory(hyperion-framebuffer)
endif()
if(ENABLE_OSX)
add_subdirectory(hyperion-osx)
endif()
endif()

19
src/hyperion-aml/CMakeLists.txt
View File

@ -4,8 +4,12 @@ cmake_minimum_required(VERSION 2.8)
# Set the project name
project(hyperion-aml)
# find Qt4
# find QT
if(ENABLE_QT5)
find_package(Qt5Widgets REQUIRED)
else(ENABLE_QT5)
find_package(Qt4 REQUIRED QtCore QtGui QtNetwork)
endif(ENABLE_QT5)
include_directories(
${CMAKE_CURRENT_BINARY_DIR}/../../libsrc/protoserver
@ -31,13 +35,13 @@ else(ENABLE_QT5)
QT4_WRAP_CPP(Hyperion_AML_HEADERS_MOC ${Hyperion_AML_QT_HEADERS})
endif(ENABLE_QT5)
add_executable(hyperion-amlogic
add_executable(${PROJECT_NAME}
${Hyperion_AML_HEADERS}
${Hyperion_AML_SOURCES}
${Hyperion_AML_HEADERS_MOC}
)
target_link_libraries(hyperion-amlogic
target_link_libraries(${PROJECT_NAME}
getoptPlusPlus
blackborder
hyperion-utils
@ -46,7 +50,8 @@ target_link_libraries(hyperion-amlogic
pthread
)
qt4_use_modules(hyperion-amlogic
Core
Gui
Network)
if(ENABLE_QT5)
qt5_use_modules(${PROJECT_NAME} Widgets Core Gui Network)
else(ENABLE_QT5)
qt4_use_modules(${PROJECT_NAME} Core Gui Network )
endif(ENABLE_QT5)

6
src/hyperion-aml/hyperion-aml.cpp
View File

@ -30,9 +30,9 @@ int main(int argc, char ** argv)
OptionsParser optionParser("X11 capture application for Hyperion");
ParameterSet & parameters = optionParser.getParameters();
IntParameter & argFps = parameters.add<IntParameter> ('f', "framerate", "Capture frame rate [default=10]");
IntParameter & argWidth = parameters.add<IntParameter> (0x0, "width", "Width of the captured image [default=128]");
IntParameter & argHeight = parameters.add<IntParameter> (0x0, "height", "Height of the captured image [default=128]");
IntParameter & argFps = parameters.add<IntParameter> ('f', "framerate", "Capture frame rate [default: 10]");
IntParameter & argWidth = parameters.add<IntParameter> (0x0, "width", "Width of the captured image [default: 128]");
IntParameter & argHeight = parameters.add<IntParameter> (0x0, "height", "Height of the captured image [default: 128]");
SwitchParameter<> & argScreenshot = parameters.add<SwitchParameter<>> (0x0, "screenshot", "Take a single screenshot, save it to file and quit");
StringParameter & argAddress = parameters.add<StringParameter> ('a', "address", "Set the address of the hyperion server [default: 127.0.0.1:19445]");
IntParameter & argPriority = parameters.add<IntParameter> ('p', "priority", "Use the provided priority channel (the lower the number, the higher the priority) [default: 800]");

10
src/hyperion-dispmanx/CMakeLists.txt
View File

@ -4,10 +4,10 @@ cmake_minimum_required(VERSION 2.8)
# Set the project name
project(hyperion-dispmanx)
# find QT
if(ENABLE_QT5)
find_package(Qt5Widgets REQUIRED)
else(ENABLE_QT5)
# find Qt4
find_package(Qt4 REQUIRED QtCore QtGui QtNetwork )
endif(ENABLE_QT5)
@ -55,11 +55,7 @@ target_link_libraries( ${PROJECT_NAME}
)
if(ENABLE_QT5)
qt5_use_modules(hyperion-dispmanx Widgets Core Gui Network)
qt5_use_modules(${PROJECT_NAME} Widgets Core Gui Network)
else(ENABLE_QT5)
qt4_use_modules(hyperion-dispmanx
Core
Gui
Network
)
qt4_use_modules(${PROJECT_NAME} Core Gui Network )
endif(ENABLE_QT5)

2
src/hyperion-dispmanx/hyperion-dispmanx.cpp
View File

@ -29,7 +29,7 @@ int main(int argc, char ** argv)
OptionsParser optionParser("Dispmanx capture application for Hyperion");
ParameterSet & parameters = optionParser.getParameters();
IntParameter & argFps = parameters.add<IntParameter> ('f', "framerate", "Capture frame rate [default=10]");
IntParameter & argFps = parameters.add<IntParameter> ('f', "framerate", "Capture frame rate [default: 10]");
IntParameter & argWidth = parameters.add<IntParameter> (0x0, "width", "The width of the grabbed frames [pixels]");
IntParameter & argHeight = parameters.add<IntParameter> (0x0, "height", "The height of the grabbed frames");

57
src/hyperion-framebuffer/CMakeLists.txt Normal file
View File

@ -0,0 +1,57 @@
# Configure minimum CMAKE version
cmake_minimum_required(VERSION 2.8)
# Set the project name
project(hyperion-framebuffer)
# find QT
if(ENABLE_QT5)
find_package(Qt5Widgets REQUIRED)
else(ENABLE_QT5)
find_package(Qt4 REQUIRED QtCore QtGui QtNetwork )
endif(ENABLE_QT5)
include_directories(
${CMAKE_CURRENT_BINARY_DIR}/../../libsrc/protoserver
${QT_INCLUDES}
${PROTOBUF_INCLUDE_DIRS}
)
set(Hyperion_FB_QT_HEADERS
FramebufferWrapper.h
)
set(Hyperion_FB_HEADERS
)
set(Hyperion_FB_SOURCES
hyperion-framebuffer.cpp
FramebufferWrapper.cpp
)
if(ENABLE_QT5)
QT5_WRAP_CPP(Hyperion_FB_HEADERS_MOC ${Hyperion_FB_QT_HEADERS})
else(ENABLE_QT5)
QT4_WRAP_CPP(Hyperion_FB_HEADERS_MOC ${Hyperion_FB_QT_HEADERS})
endif(ENABLE_QT5)
add_executable( ${PROJECT_NAME}
${Hyperion_FB_HEADERS}
${Hyperion_FB_SOURCES}
${Hyperion_FB_HEADERS_MOC}
)
target_link_libraries( ${PROJECT_NAME}
getoptPlusPlus
blackborder
hyperion-utils
protoserver
framebuffer-grabber
pthread
)
if(ENABLE_QT5)
qt5_use_modules(${PROJECT_NAME} Widgets Core Gui Network)
else(ENABLE_QT5)
qt4_use_modules(${PROJECT_NAME} Core Gui Network )
endif(ENABLE_QT5)

37
src/hyperion-framebuffer/FramebufferWrapper.cpp Normal file
View File

@ -0,0 +1,37 @@
// Hyperion-AmLogic includes
#include "FramebufferWrapper.h"
FramebufferWrapper::FramebufferWrapper(const std::string & device, const unsigned grabWidth, const unsigned grabHeight, const unsigned updateRate_Hz) :
_timer(this),
_grabber(device,grabWidth, grabHeight)
{
_timer.setSingleShot(false);
_timer.setInterval(updateRate_Hz);
// Connect capturing to the timeout signal of the timer
connect(&_timer, SIGNAL(timeout()), this, SLOT(capture()));
}
const Image<ColorRgb> & FramebufferWrapper::getScreenshot()
{
capture();
return _screenshot;
}
void FramebufferWrapper::start()
{
_timer.start();
}
void FramebufferWrapper::stop()
{
_timer.stop();
}
void FramebufferWrapper::capture()
{
_grabber.grabFrame(_screenshot);
emit sig_screenshot(_screenshot);
}

42
src/hyperion-framebuffer/FramebufferWrapper.h Normal file
View File

@ -0,0 +1,42 @@
// QT includes
#include <QTimer>
// Hyperion-Dispmanx includes
#include <grabber/FramebufferFrameGrabber.h>
class FramebufferWrapper : public QObject
{
Q_OBJECT
public:
FramebufferWrapper(const std::string & device, const unsigned grabWidth, const unsigned grabHeight, const unsigned updateRate_Hz);
const Image<ColorRgb> & getScreenshot();
///
/// Starts the timed capturing of screenshots
///
void start();
void stop();
signals:
void sig_screenshot(const Image<ColorRgb> & screenshot);
private slots:
///
/// Performs a single screenshot capture and publishes the capture screenshot on the screenshot signal.
///
void capture();
private:
/// The QT timer to generate capture-publish events
QTimer _timer;
/// The grabber for creating screenshots
FramebufferFrameGrabber _grabber;
// image buffers
Image<ColorRgb> _screenshot;
};

101
src/hyperion-framebuffer/hyperion-framebuffer.cpp Normal file
View File

@ -0,0 +1,101 @@
// QT includes
#include <QCoreApplication>
#include <QImage>
// getoptPlusPLus includes
#include <getoptPlusPlus/getoptpp.h>
#include <protoserver/ProtoConnectionWrapper.h>
#include "FramebufferWrapper.h"
using namespace vlofgren;
// save the image as screenshot
void saveScreenshot(const char * filename, const Image<ColorRgb> & image)
{
// store as PNG
QImage pngImage((const uint8_t *) image.memptr(), image.width(), image.height(), 3*image.width(), QImage::Format_RGB888);
pngImage.save(filename);
}
int main(int argc, char ** argv)
{
QCoreApplication app(argc, argv);
try
{
// create the option parser and initialize all parameters
OptionsParser optionParser("X11 capture application for Hyperion");
ParameterSet & parameters = optionParser.getParameters();
StringParameter & argDevice = parameters.add<StringParameter> ('d', "device", "Set the video device [default: /dev/video0]");
IntParameter & argFps = parameters.add<IntParameter> ('f', "framerate", "Capture frame rate [default: 10]");
IntParameter & argWidth = parameters.add<IntParameter> (0x0, "width", "Width of the captured image [default: 128]");
IntParameter & argHeight = parameters.add<IntParameter> (0x0, "height", "Height of the captured image [default: 128]");
SwitchParameter<> & argScreenshot = parameters.add<SwitchParameter<>> (0x0, "screenshot", "Take a single screenshot, save it to file and quit");
StringParameter & argAddress = parameters.add<StringParameter> ('a', "address", "Set the address of the hyperion server [default: 127.0.0.1:19445]");
IntParameter & argPriority = parameters.add<IntParameter> ('p', "priority", "Use the provided priority channel (the lower the number, the higher the priority) [default: 800]");
SwitchParameter<> & argSkipReply = parameters.add<SwitchParameter<>> (0x0, "skip-reply", "Do not receive and check reply messages from Hyperion");
SwitchParameter<> & argHelp = parameters.add<SwitchParameter<>> ('h', "help", "Show this help message and exit");
// set defaults
argFps.setDefault(10);
argWidth.setDefault(160);
argHeight.setDefault(160);
argAddress.setDefault("127.0.0.1:19445");
argPriority.setDefault(800);
argDevice.setDefault("/dev/video0");
// parse all options
optionParser.parse(argc, const_cast<const char **>(argv));
// check if we need to display the usage. exit if we do.
if (argHelp.isSet())
{
optionParser.usage();
return 0;
}
int width = argWidth.getValue();
int height = argHeight.getValue();
if (width < 160 || height < 160)
{
std::cout << "Minimum width and height is 160" << std::endl;
width = std::max(160, width);
height = std::max(160, height);
}
int grabInterval = 1000 / argFps.getValue();
FramebufferWrapper fbWrapper(argDevice.getValue(), argWidth.getValue(), argHeight.getValue(), grabInterval);
if (argScreenshot.isSet())
{
// Capture a single screenshot and finish
const Image<ColorRgb> & screenshot = fbWrapper.getScreenshot();
saveScreenshot("screenshot.png", screenshot);
}
else
{
// Create the Proto-connection with hyperiond
ProtoConnectionWrapper protoWrapper(argAddress.getValue(), argPriority.getValue(), 1000, argSkipReply.isSet());
// Connect the screen capturing to the proto processing
QObject::connect(&fbWrapper, SIGNAL(sig_screenshot(const Image<ColorRgb> &)), &protoWrapper, SLOT(receiveImage(Image<ColorRgb>)));
// Start the capturing
fbWrapper.start();
// Start the application
app.exec();
}
}
catch (const std::runtime_error & e)
{
// An error occured. Display error and quit
std::cerr << e.what() << std::endl;
return -1;
}
return 0;
}

57
src/hyperion-osx/CMakeLists.txt Normal file
View File

@ -0,0 +1,57 @@
# Configure minimum CMAKE version
cmake_minimum_required(VERSION 2.8)
# Set the project name
project(hyperion-osx)
# find QT
if(ENABLE_QT5)
find_package(Qt5Widgets REQUIRED)
else(ENABLE_QT5)
find_package(Qt4 REQUIRED QtCore QtGui QtNetwork )
endif(ENABLE_QT5)
include_directories(
${CMAKE_CURRENT_BINARY_DIR}/../../libsrc/protoserver
${QT_INCLUDES}
${PROTOBUF_INCLUDE_DIRS}
)
set(Hyperion_OSX_QT_HEADERS
OsxWrapper.h
)
set(Hyperion_OSX_HEADERS
)
set(Hyperion_OSX_SOURCES
hyperion-osx.cpp
OsxWrapper.cpp
)
if(ENABLE_QT5)
QT5_WRAP_CPP(Hyperion_OSX_HEADERS_MOC ${Hyperion_OSX_QT_HEADERS})
else(ENABLE_QT5)
QT4_WRAP_CPP(Hyperion_OSX_HEADERS_MOC ${Hyperion_OSX_QT_HEADERS})
endif(ENABLE_QT5)
add_executable( ${PROJECT_NAME}
${Hyperion_OSX_HEADERS}
${Hyperion_OSX_SOURCES}
${Hyperion_OSX_HEADERS_MOC}
)
target_link_libraries( ${PROJECT_NAME}
getoptPlusPlus
blackborder
hyperion-utils
protoserver
osx-grabber
pthread
)
if(ENABLE_QT5)
qt5_use_modules(${PROJECT_NAME} Widgets Core Gui Network)
else(ENABLE_QT5)
qt4_use_modules(${PROJECT_NAME} Core Gui Network )
endif(ENABLE_QT5)

36
src/hyperion-osx/OsxWrapper.cpp Normal file
View File

@ -0,0 +1,36 @@
// Hyperion-AmLogic includes
#include "OsxWrapper.h"
OsxWrapper::OsxWrapper(const unsigned display, const unsigned grabWidth, const unsigned grabHeight, const unsigned updateRate_Hz) :
_timer(this),
_grabber(display,grabWidth, grabHeight)
{
_timer.setSingleShot(false);
_timer.setInterval(updateRate_Hz);
// Connect capturing to the timeout signal of the timer
connect(&_timer, SIGNAL(timeout()), this, SLOT(capture()));
}
const Image<ColorRgb> & OsxWrapper::getScreenshot()
{
capture();
return _screenshot;
}
void OsxWrapper::start()
{
_timer.start();
}
void OsxWrapper::stop()
{
_timer.stop();
}
void OsxWrapper::capture()
{
_grabber.grabFrame(_screenshot);
emit sig_screenshot(_screenshot);
}

42
src/hyperion-osx/OsxWrapper.h Normal file
View File

@ -0,0 +1,42 @@
// QT includes
#include <QTimer>
// Hyperion-Dispmanx includes
#include <grabber/OsxFrameGrabber.h>
class OsxWrapper : public QObject
{
Q_OBJECT
public:
OsxWrapper(const unsigned display, const unsigned grabWidth, const unsigned grabHeight, const unsigned updateRate_Hz);
const Image<ColorRgb> & getScreenshot();
///
/// Starts the timed capturing of screenshots
///
void start();
void stop();
signals:
void sig_screenshot(const Image<ColorRgb> & screenshot);
private slots:
///
/// Performs a single screenshot capture and publishes the capture screenshot on the screenshot signal.
///
void capture();
private:
/// The QT timer to generate capture-publish events
QTimer _timer;
/// The grabber for creating screenshots
OsxFrameGrabber _grabber;
// image buffers
Image<ColorRgb> _screenshot;
};

101
src/hyperion-osx/hyperion-osx.cpp Normal file
View File

@ -0,0 +1,101 @@
// QT includes
#include <QCoreApplication>
#include <QImage>
// getoptPlusPLus includes
#include <getoptPlusPlus/getoptpp.h>
#include <protoserver/ProtoConnectionWrapper.h>
#include "OsxWrapper.h"
using namespace vlofgren;
// save the image as screenshot
void saveScreenshot(const char * filename, const Image<ColorRgb> & image)
{
// store as PNG
QImage pngImage((const uint8_t *) image.memptr(), image.width(), image.height(), 3*image.width(), QImage::Format_RGB888);
pngImage.save(filename);
}
int main(int argc, char ** argv)
{
QCoreApplication app(argc, argv);
try
{
// create the option parser and initialize all parameters
OptionsParser optionParser("X11 capture application for Hyperion");
ParameterSet & parameters = optionParser.getParameters();
IntParameter & argDisplay = parameters.add<IntParameter> ('d', "display", "Set the display to capture [default: 0]");
IntParameter & argFps = parameters.add<IntParameter> ('f', "framerate", "Capture frame rate [default: 10]");
IntParameter & argWidth = parameters.add<IntParameter> (0x0, "width", "Width of the captured image [default: 128]");
IntParameter & argHeight = parameters.add<IntParameter> (0x0, "height", "Height of the captured image [default: 128]");
SwitchParameter<> & argScreenshot = parameters.add<SwitchParameter<>> (0x0, "screenshot", "Take a single screenshot, save it to file and quit");
StringParameter & argAddress = parameters.add<StringParameter> ('a', "address", "Set the address of the hyperion server [default: 127.0.0.1:19445]");
IntParameter & argPriority = parameters.add<IntParameter> ('p', "priority", "Use the provided priority channel (the lower the number, the higher the priority) [default: 800]");
SwitchParameter<> & argSkipReply = parameters.add<SwitchParameter<>> (0x0, "skip-reply", "Do not receive and check reply messages from Hyperion");
SwitchParameter<> & argHelp = parameters.add<SwitchParameter<>> ('h', "help", "Show this help message and exit");
// set defaults
argFps.setDefault(10);
argWidth.setDefault(160);
argHeight.setDefault(160);
argAddress.setDefault("127.0.0.1:19445");
argPriority.setDefault(800);
argDisplay.setDefault(0);
// parse all options
optionParser.parse(argc, const_cast<const char **>(argv));
// check if we need to display the usage. exit if we do.
if (argHelp.isSet())
{
optionParser.usage();
return 0;
}
int width = argWidth.getValue();
int height = argHeight.getValue();
if (width < 160 || height < 160)
{
std::cout << "Minimum width and height is 160" << std::endl;
width = std::max(160, width);
height = std::max(160, height);
}
int grabInterval = 1000 / argFps.getValue();
OsxWrapper osxWrapper(argDisplay.getValue(), argWidth.getValue(), argHeight.getValue(), grabInterval);
if (argScreenshot.isSet())
{
// Capture a single screenshot and finish
const Image<ColorRgb> & screenshot = osxWrapper.getScreenshot();
saveScreenshot("screenshot.png", screenshot);
}
else
{
// Create the Proto-connection with hyperiond
ProtoConnectionWrapper protoWrapper(argAddress.getValue(), argPriority.getValue(), 1000, argSkipReply.isSet());
// Connect the screen capturing to the proto processing
QObject::connect(&osxWrapper, SIGNAL(sig_screenshot(const Image<ColorRgb> &)), &protoWrapper, SLOT(receiveImage(Image<ColorRgb>)));
// Start the capturing
osxWrapper.start();
// Start the application
app.exec();
}
}
catch (const std::runtime_error & e)
{
// An error occured. Display error and quit
std::cerr << e.what() << std::endl;
return -1;
}
return 0;
}

16
src/hyperion-remote/CMakeLists.txt
View File

@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 2.8)
project(hyperion-remote)
# find Qt4
# find Qt
if(ENABLE_QT5)
find_package(Qt5 COMPONENTS Core Gui Widgets Network REQUIRED)
# set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${Qt5Widgets_EXECUTABLE_COMPILE_FLAGS}")
@ -27,15 +27,17 @@ set(hyperion-remote_SOURCES
hyperion-remote.cpp
JsonConnection.cpp)
add_executable(hyperion-remote
add_executable(${PROJECT_NAME}
${hyperion-remote_HEADERS}
${hyperion-remote_SOURCES})
if(ENABLE_QT5)
qt5_use_modules(hyperion-remote Widgets Network)
endif(ENABLE_QT5)
target_link_libraries(hyperion-remote
target_link_libraries(${PROJECT_NAME}
jsoncpp
getoptPlusPlus
${QT_LIBRARIES})
if(ENABLE_QT5)
qt5_use_modules(${PROJECT_NAME} Widgets Core Network)
else(ENABLE_QT5)
qt4_use_modules(${PROJECT_NAME} Core Gui Network )
endif(ENABLE_QT5)

12
src/hyperion-v4l2/CMakeLists.txt
View File

@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 2.8)
project(hyperion-v4l2)
# find Qt4
# find Qt
if(ENABLE_QT5)
find_package(Qt5Widgets REQUIRED)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${Qt5Widgets_EXECUTABLE_COMPILE_FLAGS}")
@ -37,14 +37,14 @@ else(ENABLE_QT5)
QT4_WRAP_CPP(Hyperion_V4L2_MOC_SOURCES ${Hyperion_V4L2_QT_HEADERS})
endif(ENABLE_QT5)
add_executable(hyperion-v4l2
add_executable(${PROJECT_NAME}
${Hyperion_V4L2_HEADERS}
${Hyperion_V4L2_SOURCES}
${Hyperion_V4L2_QT_HEADERS}
${Hyperion_V4L2_MOC_SOURCES}
)
target_link_libraries(hyperion-v4l2
target_link_libraries(${PROJECT_NAME}
v4l2-grabber
getoptPlusPlus
blackborder
@ -53,3 +53,9 @@ target_link_libraries(hyperion-v4l2
pthread
${QT_LIBRARIES}
)
if(ENABLE_QT5)
qt5_use_modules(${PROJECT_NAME} Widgets Core Gui Network)
else(ENABLE_QT5)
qt4_use_modules(${PROJECT_NAME} Core Gui Network )
endif(ENABLE_QT5)

6
src/hyperion-v4l2/hyperion-v4l2.cpp
View File

@ -51,14 +51,14 @@ int main(int argc, char** argv)
OptionsParser optionParser("V4L capture application for Hyperion");
ParameterSet & parameters = optionParser.getParameters();
StringParameter & argDevice = parameters.add<StringParameter> ('d', "device", "The device to use [default=/dev/video0]");
StringParameter & argDevice = parameters.add<StringParameter> ('d', "device", "The device to use [default: /dev/video0]");
VideoStandardParameter & argVideoStandard = parameters.add<VideoStandardParameter>('v', "video-standard", "The used video standard. Valid values are PAL or NTSC (optional)");
PixelFormatParameter & argPixelFormat = parameters.add<PixelFormatParameter> (0x0, "pixel-format", "The use pixel format. Valid values are YUYV, UYVY, and RGB32 (optional)");
IntParameter & argInput = parameters.add<IntParameter> (0x0, "input", "Input channel (optional)");
IntParameter & argWidth = parameters.add<IntParameter> (0x0, "width", "Try to set the width of the video input (optional)");
IntParameter & argHeight = parameters.add<IntParameter> (0x0, "height", "Try to set the height of the video input (optional)");
IntParameter & argCropWidth = parameters.add<IntParameter> (0x0, "crop-width", "Number of pixels to crop from the left and right sides of the picture before decimation [default=0]");
IntParameter & argCropHeight = parameters.add<IntParameter> (0x0, "crop-height", "Number of pixels to crop from the top and the bottom of the picture before decimation [default=0]");
IntParameter & argCropWidth = parameters.add<IntParameter> (0x0, "crop-width", "Number of pixels to crop from the left and right sides of the picture before decimation [default: 0]");
IntParameter & argCropHeight = parameters.add<IntParameter> (0x0, "crop-height", "Number of pixels to crop from the top and the bottom of the picture before decimation [default: 0]");
IntParameter & argCropLeft = parameters.add<IntParameter> (0x0, "crop-left", "Number of pixels to crop from the left of the picture before decimation (overrides --crop-width)");
IntParameter & argCropRight = parameters.add<IntParameter> (0x0, "crop-right", "Number of pixels to crop from the right of the picture before decimation (overrides --crop-width)");
IntParameter & argCropTop = parameters.add<IntParameter> (0x0, "crop-top", "Number of pixels to crop from the top of the picture before decimation (overrides --crop-height)");

14
src/hyperion-x11/CMakeLists.txt
View File

@ -4,10 +4,10 @@ cmake_minimum_required(VERSION 2.8)
# Set the project name
project(hyperion-x11)
# find QT
if(ENABLE_QT5)
find_package(Qt5Widgets REQUIRED)
else(ENABLE_QT5)
# find Qt4
find_package(Qt4 REQUIRED QtCore QtGui QtNetwork)
endif(ENABLE_QT5)
@ -38,13 +38,14 @@ else(ENABLE_QT5)
QT4_WRAP_CPP(Hyperion_X11_HEADERS_MOC ${Hyperion_X11_QT_HEADERS})
endif(ENABLE_QT5)
add_executable(hyperion-x11
add_executable(${PROJECT_NAME}
${Hyperion_X11_HEADERS}
${Hyperion_X11_SOURCES}
${Hyperion_X11_HEADERS_MOC}
)
target_link_libraries(hyperion-x11
target_link_libraries(${PROJECT_NAME}
getoptPlusPlus
blackborder
hyperion-utils
@ -55,10 +56,7 @@ target_link_libraries(hyperion-x11
)
if(ENABLE_QT5)
qt5_use_modules(hyperion-x11 Widgets Core Gui Network)
qt5_use_modules(${PROJECT_NAME} Widgets Core Gui Network)
else(ENABLE_QT5)
qt4_use_modules(hyperion-x11
Core
Gui
Network)
qt4_use_modules(${PROJECT_NAME} Core Gui Network )
endif(ENABLE_QT5)

6
src/hyperion-x11/hyperion-x11.cpp
View File

@ -29,9 +29,9 @@ int main(int argc, char ** argv)
OptionsParser optionParser("X11 capture application for Hyperion");
ParameterSet & parameters = optionParser.getParameters();
IntParameter & argFps = parameters.add<IntParameter> ('f', "framerate", "Capture frame rate [default=10]");
IntParameter & argCropWidth = parameters.add<IntParameter> (0x0, "crop-width", "Number of pixels to crop from the left and right sides of the picture before decimation [default=0]");
IntParameter & argCropHeight = parameters.add<IntParameter> (0x0, "crop-height", "Number of pixels to crop from the top and the bottom of the picture before decimation [default=0]");
IntParameter & argFps = parameters.add<IntParameter> ('f', "framerate", "Capture frame rate [default: 10]");
IntParameter & argCropWidth = parameters.add<IntParameter> (0x0, "crop-width", "Number of pixels to crop from the left and right sides of the picture before decimation [default: 0]");
IntParameter & argCropHeight = parameters.add<IntParameter> (0x0, "crop-height", "Number of pixels to crop from the top and the bottom of the picture before decimation [default: 0]");
IntParameter & argCropLeft = parameters.add<IntParameter> (0x0, "crop-left", "Number of pixels to crop from the left of the picture before decimation (overrides --crop-width)");
IntParameter & argCropRight = parameters.add<IntParameter> (0x0, "crop-right", "Number of pixels to crop from the right of the picture before decimation (overrides --crop-width)");
IntParameter & argCropTop = parameters.add<IntParameter> (0x0, "crop-top", "Number of pixels to crop from the top of the picture before decimation (overrides --crop-height)");

10
src/hyperiond/hyperiond.cpp
View File

@ -127,7 +127,7 @@ int main(int argc, char** argv)
// Get the parameters for the bootsequence
const std::string effectName = effectConfig["effect"].asString();
const unsigned duration_ms = effectConfig["duration_ms"].asUInt();
const int priority = effectConfig["priority"].asUInt();
const int priority = effectConfig.get("priority",990).asInt();
const int bootcolor_priority = (priority > 990) ? priority+1 : 990;
if ( ! effectConfig["color"].isNull() && effectConfig["color"].isArray() && effectConfig["color"].size() == 3 )
@ -216,7 +216,7 @@ int main(int argc, char** argv)
if (config.isMember("boblightServer"))
{
const Json::Value & boblightServerConfig = config["boblightServer"];
boblightServer = new BoblightServer(&hyperion, boblightServerConfig["port"].asUInt());
boblightServer = new BoblightServer(&hyperion, boblightServerConfig.get("priority",900).asInt(), boblightServerConfig["port"].asUInt());
std::cout << "Boblight server created and started on port " << boblightServer->getPort() << std::endl;
}
@ -232,6 +232,7 @@ int main(int argc, char** argv)
frameGrabberConfig["width"].asUInt(),
frameGrabberConfig["height"].asUInt(),
frameGrabberConfig["frequency_Hz"].asUInt(),
frameGrabberConfig.get("priority",900).asInt(),
&hyperion);
if (xbmcVideoChecker != nullptr)
@ -275,7 +276,7 @@ int main(int argc, char** argv)
grabberConfig.get("greenSignalThreshold", 0.0).asDouble(),
grabberConfig.get("blueSignalThreshold", 0.0).asDouble(),
&hyperion,
grabberConfig.get("priority", 800).asInt());
grabberConfig.get("priority", 900).asInt());
v4l2Grabber->set3D(parse3DMode(grabberConfig.get("mode", "2D").asString()));
v4l2Grabber->setCropping(
grabberConfig.get("cropLeft", 0).asInt(),
@ -308,6 +309,7 @@ int main(int argc, char** argv)
grabberConfig["width"].asUInt(),
grabberConfig["height"].asUInt(),
grabberConfig["frequency_Hz"].asUInt(),
grabberConfig.get("priority",900).asInt(),
&hyperion);
if (xbmcVideoChecker != nullptr)
@ -341,6 +343,7 @@ int main(int argc, char** argv)
grabberConfig["width"].asUInt(),
grabberConfig["height"].asUInt(),
grabberConfig["frequency_Hz"].asUInt(),
grabberConfig.get("priority",900).asInt(),
&hyperion);
if (xbmcVideoChecker != nullptr)
@ -380,6 +383,7 @@ int main(int argc, char** argv)
grabberConfig["width"].asUInt(),
grabberConfig["height"].asUInt(),
grabberConfig["frequency_Hz"].asUInt(),
grabberConfig.get("priority",900).asInt(),
&hyperion );
if (xbmcVideoChecker != nullptr)