mirror of
https://github.com/hyperion-project/hyperion.ng.git
synced 2025-03-01 10:33:28 +00:00
Dynamic Device Selection/Configuration (#1164)
This commit is contained in:
LordGrey
GitHub
@@ -1,15 +1,4 @@
|
||||
{
|
||||
"InfoDialog_access_text": "Depending on settings level you could adjust more options or get access to more features. Recommended is the \"Default\" level.",
|
||||
"InfoDialog_access_title": "Settings level",
|
||||
"InfoDialog_changePassword_success": "Password successfully saved!",
|
||||
"InfoDialog_changePassword_title": "Change Password",
|
||||
"InfoDialog_iswitch_text": "If you run Hyperion more than once in your local network, you could switch between the web configurations. Select the Hyperion instance below and switch!",
|
||||
"InfoDialog_iswitch_title": "Hyperion switcher",
|
||||
"InfoDialog_lang_text": "If you don't like the result of the automatic language detection you could overwrite it here.",
|
||||
"InfoDialog_lang_title": "Language setting",
|
||||
"InfoDialog_nowrite_foottext": "The WebUI will be unlocked automatically after you solved the problem!",
|
||||
"InfoDialog_nowrite_text": "Hyperion can't write to your current loaded configuration file. Please repair the file permissions to proceed.",
|
||||
"InfoDialog_nowrite_title": "write permission error!",
|
||||
"about_3rd_party_licenses": "3rd party licenses",
|
||||
"about_3rd_party_licenses_error": "We had trouble collecting 3rd party licenses information from web. <br />Please follow this link to the GitHub Resource.",
|
||||
"about_build": "Build",
|
||||
@@ -45,9 +34,19 @@
|
||||
"conf_grabber_v4l_intro": "USB capture is a (capture)device connected via USB which is used to input source pictures for processing.",
|
||||
"conf_helptable_expl": "Explanation",
|
||||
"conf_helptable_option": "Option",
|
||||
"conf_leds_config_error": "Error in LED/LED layout configuration",
|
||||
"conf_leds_config_warning": "Check your LED/LED layout configuration",
|
||||
"conf_leds_contr_label_contrtype": "Controller type:",
|
||||
"conf_leds_device_info_log": "In case your LEDs do not work, check here for errors:",
|
||||
"conf_leds_device_intro": "Hyperion supports a lot of controllers to transmit data to your target device. Select a LED controller out of the sorted list and configure it. We have chosen the best default settings for each device.",
|
||||
"conf_leds_error_hwled_gt_layout": "The hardware LED count ($1) is greater than LEDs configured via layout ($2),<br>$3 {{plural:$1|LED|LEDs}} will stay black if you continue.",
|
||||
"conf_leds_error_hwled_lt_layout": "The hardware LED count ($1) is less than LEDs configured via layout ($2). <br> The number of LEDs configured in the layout must not exceed the available LEDs",
|
||||
"conf_leds_layout_advanced": "Advanced Settings",
|
||||
"conf_leds_layout_blacklist_num_title": "Number of LEDs",
|
||||
"conf_leds_layout_blacklist_rule_title": "Blacklist rule",
|
||||
"conf_leds_layout_blacklist_rules_title": "Blacklist rules",
|
||||
"conf_leds_layout_blacklist_start_title": "Start LED",
|
||||
"conf_leds_layout_blacklistleds_title": "Blacklist LEDs",
|
||||
"conf_leds_layout_btn_checklist": "Show checklist",
|
||||
"conf_leds_layout_button_savelay": "Save Layout",
|
||||
"conf_leds_layout_button_updsim": "Update Preview",
|
||||
@@ -113,11 +112,12 @@
|
||||
"conf_leds_layout_textf1": "This text field shows by default your current loaded layout and will be overwritten if you generate a new one with the options above. Optional you could perform further edits.",
|
||||
"conf_leds_nav_label_ledcontroller": "LED Controller",
|
||||
"conf_leds_nav_label_ledlayout": "LED Layout",
|
||||
"conf_leds_note_layout_overwrite": "Note: Overwrite creates a default layout for {{plural:$1| $1 LED| all $1 LEDs}} given by the hardware LED count",
|
||||
"conf_leds_optgroup_network": "Network",
|
||||
"conf_leds_optgroup_other": "Other",
|
||||
"conf_leds_optgroup_RPiGPIO": "RPi GPIO",
|
||||
"conf_leds_optgroup_RPiPWM": "RPi PWM",
|
||||
"conf_leds_optgroup_RPiSPI": "RPi SPI",
|
||||
"conf_leds_optgroup_debug": "Debug",
|
||||
"conf_leds_optgroup_network": "Network",
|
||||
"conf_leds_optgroup_usb": "USB/Serial",
|
||||
"conf_logging_btn_autoscroll": "Auto scrolling",
|
||||
"conf_logging_btn_pbupload": "Upload a report for support requests",
|
||||
@@ -215,10 +215,10 @@
|
||||
"edt_conf_color_black_title": "Black",
|
||||
"edt_conf_color_blue_expl": "The calibrated blue value.",
|
||||
"edt_conf_color_blue_title": "Blue",
|
||||
"edt_conf_color_brightnessComp_expl": "Compensates brightness differences between red green blue, cyan magenta yellow and white. 100 means full compensation, 0 no compensation",
|
||||
"edt_conf_color_brightnessComp_title": "Brightness compensation",
|
||||
"edt_conf_color_brightness_expl": "set overall brightness of LEDs",
|
||||
"edt_conf_color_brightness_title": "Brightness",
|
||||
"edt_conf_color_brightnessComp_expl": "Compensates brightness differences between red green blue, cyan magenta yellow and white. 100 means full compensation, 0 no compensation",
|
||||
"edt_conf_color_brightnessComp_title": "Brightness compensation",
|
||||
"edt_conf_color_channelAdjustment_header_expl": "Create color profiles that could be assigned to a specific component. Adjust color, gamma, brightness, compensation and more.",
|
||||
"edt_conf_color_channelAdjustment_header_itemtitle": "Profile",
|
||||
"edt_conf_color_channelAdjustment_header_title": "Color channel adjustments",
|
||||
@@ -254,10 +254,6 @@
|
||||
"edt_conf_effp_paths_expl": "You could define more folders that contain effects. The effect configurator will always save inside the first folder.",
|
||||
"edt_conf_effp_paths_itemtitle": "Path",
|
||||
"edt_conf_effp_paths_title": "Effect Path(s)",
|
||||
"edt_conf_enum_NO_CHANGE": "Automatic",
|
||||
"edt_conf_enum_NTSC": "NTSC",
|
||||
"edt_conf_enum_PAL": "PAL",
|
||||
"edt_conf_enum_SECAM": "SECAM",
|
||||
"edt_conf_enum_automatic": "Automatic",
|
||||
"edt_conf_enum_bbclassic": "Classic",
|
||||
"edt_conf_enum_bbdefault": "Default",
|
||||
@@ -288,9 +284,14 @@
|
||||
"edt_conf_enum_logverbose": "Verbose",
|
||||
"edt_conf_enum_logwarn": "Warning",
|
||||
"edt_conf_enum_multicolor_mean": "Multicolor",
|
||||
"edt_conf_enum_NO_CHANGE": "Automatic",
|
||||
"edt_conf_enum_NTSC": "NTSC",
|
||||
"edt_conf_enum_PAL": "PAL",
|
||||
"edt_conf_enum_please_select": "Please Select",
|
||||
"edt_conf_enum_rbg": "RBG",
|
||||
"edt_conf_enum_rgb": "RGB",
|
||||
"edt_conf_enum_right_left": "Right to left",
|
||||
"edt_conf_enum_SECAM": "SECAM",
|
||||
"edt_conf_enum_top_down": "Top down",
|
||||
"edt_conf_enum_transeffect_smooth": "Smooth",
|
||||
"edt_conf_enum_transeffect_sudden": "Sudden",
|
||||
@@ -322,11 +323,12 @@
|
||||
"edt_conf_fge_type_title": "Type",
|
||||
"edt_conf_fw_flat_expl": "One flatbuffer target per line. Contains IP:PORT (Example: 127.0.0.1:19401)",
|
||||
"edt_conf_fw_flat_itemtitle": "flatbuffer target",
|
||||
"edt_conf_fw_flat_title": "List of flatbuffer clients",
|
||||
"edt_conf_fw_flat_title": "List of flatbuffer targets",
|
||||
"edt_conf_fw_heading_title": "Forwarder",
|
||||
"edt_conf_fw_json_expl": "One json target per line. Contains IP:PORT (Example: 127.0.0.1:19446)",
|
||||
"edt_conf_fw_json_itemtitle": "Json target",
|
||||
"edt_conf_fw_json_title": "List of json clients",
|
||||
"edt_conf_fw_json_title": "List of json targets",
|
||||
"edt_conf_gen_configVersion_title": "Configuration version",
|
||||
"edt_conf_gen_heading_title": "General Settings",
|
||||
"edt_conf_gen_name_expl": "A user defined name which is used to detect Hyperion. (Helpful with more than one Hyperion instance)",
|
||||
"edt_conf_gen_name_title": "Configuration name",
|
||||
@@ -354,9 +356,9 @@
|
||||
"edt_conf_net_heading_title": "Network",
|
||||
"edt_conf_net_internetAccessAPI_expl": "Allow access to the Hyperion API/Webinterface from the internet, disable for higher security.",
|
||||
"edt_conf_net_internetAccessAPI_title": "Internet API Access",
|
||||
"edt_conf_net_ip_itemtitle": "IP",
|
||||
"edt_conf_net_ipWhitelist_expl": "You can whitelist IP addresses instead allowing all connections from internet to connect to the Hyperion API/Webinterface.",
|
||||
"edt_conf_net_ipWhitelist_title": "Whitelisted IP's",
|
||||
"edt_conf_net_ip_itemtitle": "IP",
|
||||
"edt_conf_net_localAdminAuth_expl": "When enabled, administration access from your local network needs a password.",
|
||||
"edt_conf_net_localAdminAuth_title": "Local Admin API Authentication",
|
||||
"edt_conf_net_localApiAuth_expl": "When enabled, connections from your home network needs to authenticate themself against Hyperion with a token.",
|
||||
@@ -436,25 +438,25 @@
|
||||
"edt_conf_webc_sslport_expl": "Port oft the HTTPS-Webserver",
|
||||
"edt_conf_webc_sslport_title": "HTTPS Port",
|
||||
"edt_dev_auth_key_title": "Authentication Token",
|
||||
"edt_dev_auth_key_title_info": "Authentication Token required to acccess the device",
|
||||
"edt_dev_enum_sub_min_cool_adjust": "Subtract cool white",
|
||||
"edt_dev_enum_sub_min_warm_adjust": "Subtract warm white",
|
||||
"edt_dev_enum_subtract_minimum": "Subtract minimum",
|
||||
"edt_dev_enum_white_off": "White off",
|
||||
"edt_dev_general_colorOrder_title": "RGB byte order",
|
||||
"edt_dev_general_colorOrder_title_info": "The device's color order",
|
||||
"edt_dev_general_hardwareLedCount_title": "Hardware LED count",
|
||||
"edt_dev_general_hardwareLedCount_title_info": "The number of physical LEDs availabe for the given device",
|
||||
"edt_dev_general_heading_title": "General Settings",
|
||||
"edt_dev_general_name_title": "Configuration name",
|
||||
"edt_dev_general_rewriteTime_title": "Refresh time",
|
||||
"edt_dev_spec_FCledToOn_title": "Fadecandy LED set to on",
|
||||
"edt_dev_spec_FCmanualControl_title": "Manual control of fadecandy LED",
|
||||
"edt_dev_spec_FCsetConfig_title": "Set fadecandy configuration",
|
||||
"edt_dev_spec_LBap102Mode_title": "LightBerry APA102 Mode",
|
||||
"edt_dev_spec_PBFiFo_title": "Pi-Blaster FiFo",
|
||||
"edt_dev_spec_baudrate_title": "Baudrate",
|
||||
"edt_dev_spec_blackLightsTimeout_title": "Signal detection timeout on black",
|
||||
"edt_dev_spec_brightness_title": "Brightness",
|
||||
"edt_dev_spec_brightnessFactor_title": "Brightness factor",
|
||||
"edt_dev_spec_brightnessMax_title": "Brightness maximum",
|
||||
"edt_dev_spec_brightnessMin_title": "Brightness minimum",
|
||||
"edt_dev_spec_brightnessOverwrite_title": "Overwrite brightness",
|
||||
"edt_dev_spec_brightnessThreshold_title": "Signal detection brightness minimum",
|
||||
"edt_dev_spec_chanperfixture_title": "Channels per Fixture",
|
||||
"edt_dev_spec_cid_title": "CID",
|
||||
@@ -463,8 +465,16 @@
|
||||
"edt_dev_spec_debugLevel_title": "Debug Level",
|
||||
"edt_dev_spec_debugStreamer_title": "Streamer Debug",
|
||||
"edt_dev_spec_delayAfterConnect_title": "Delay after connect",
|
||||
"edt_dev_spec_devices_discovered_none": "No Devices Discovered",
|
||||
"edt_dev_spec_devices_discovered_title": "Devices Discovered",
|
||||
"edt_dev_spec_devices_discovered_title_info": "Select your LED-Device discovered",
|
||||
"edt_dev_spec_devices_discovered_title_info_custom": "Select your LED-Device discovered or configure a custome one",
|
||||
"edt_dev_spec_devices_discovery_inprogress": "Discovery in progress",
|
||||
"edt_dev_spec_dithering_title": "Dithering",
|
||||
"edt_dev_spec_dmaNumber_title": "DMA channel",
|
||||
"edt_dev_spec_FCledToOn_title": "Fadecandy LED set to on",
|
||||
"edt_dev_spec_FCmanualControl_title": "Manual control of fadecandy LED",
|
||||
"edt_dev_spec_FCsetConfig_title": "Set fadecandy configuration",
|
||||
"edt_dev_spec_gamma_title": "Gamma",
|
||||
"edt_dev_spec_globalBrightnessControlMaxLevel_title": "Max Current Level",
|
||||
"edt_dev_spec_globalBrightnessControlThreshold_title": "Adaptive Current Threshold",
|
||||
@@ -477,6 +487,8 @@
|
||||
"edt_dev_spec_intervall_title": "Interval",
|
||||
"edt_dev_spec_invert_title": "Invert signal",
|
||||
"edt_dev_spec_latchtime_title": "Latch time",
|
||||
"edt_dev_spec_latchtime_title_info": "Latch time is the time-frame a device requires until the next update can be processed. During that time-frame any updates done via ignored.",
|
||||
"edt_dev_spec_LBap102Mode_title": "LightBerry APA102 Mode",
|
||||
"edt_dev_spec_ledIndex_title": "LED index",
|
||||
"edt_dev_spec_ledType_title": "LED Type",
|
||||
"edt_dev_spec_lightid_itemtitle": "ID",
|
||||
@@ -484,8 +496,8 @@
|
||||
"edt_dev_spec_lights_itemtitle": "Light",
|
||||
"edt_dev_spec_lights_name": "Name",
|
||||
"edt_dev_spec_lights_title": "Light(s)",
|
||||
"edt_dev_spec_maxPacket_title": "Max packet",
|
||||
"edt_dev_spec_maximumLedCount_title": "Maximum LED count",
|
||||
"edt_dev_spec_maxPacket_title": "Max packet",
|
||||
"edt_dev_spec_multicastGroup_title": "Multicast group",
|
||||
"edt_dev_spec_networkDeviceName_title": "Network devicename",
|
||||
"edt_dev_spec_networkDevicePort_title": "Port",
|
||||
@@ -496,23 +508,27 @@
|
||||
"edt_dev_spec_outputPath_title": "Output path",
|
||||
"edt_dev_spec_panel_start_position": "Start panel [0-max panels]",
|
||||
"edt_dev_spec_panelorganisation_title": "Panel numbering sequence",
|
||||
"edt_dev_spec_PBFiFo_title": "Pi-Blaster FiFo",
|
||||
"edt_dev_spec_pid_title": "PID",
|
||||
"edt_dev_spec_port_title": "Port",
|
||||
"edt_dev_spec_printTimeStamp_title": "Add timestamp",
|
||||
"edt_dev_spec_pwmChannel_title": "PWM channel",
|
||||
"edt_dev_spec_restoreOriginalState_title": "Restore lights' original state when disabled",
|
||||
"edt_dev_spec_restoreOriginalState_title": "Restore lights' state",
|
||||
"edt_dev_spec_restoreOriginalState_title_info": "Restore the device's original state when device is disabled",
|
||||
"edt_dev_spec_serial_title": "Serial number",
|
||||
"edt_dev_spec_spipath_title": "SPI path",
|
||||
"edt_dev_spec_spipath_title": "SPI Device",
|
||||
"edt_dev_spec_sslHSTimeoutMax_title": "Streamer handshake timeout maximum",
|
||||
"edt_dev_spec_sslHSTimeoutMin_title": "Streamer handshake timeout minimum",
|
||||
"edt_dev_spec_sslReadTimeout_title": "Streamer read timeout",
|
||||
"edt_dev_spec_switchOffOnBlack_title": "Switch off on black",
|
||||
"edt_dev_spec_switchOffOnbelowMinBrightness_title": "Switch-off, below minimum",
|
||||
"edt_dev_spec_targetIpHost_title": "Target IP/Hostname",
|
||||
"edt_dev_spec_targetIp_title": "Target IP",
|
||||
"edt_dev_spec_switchOffOnBlack_title": "Switch off on black",
|
||||
"edt_dev_spec_syncOverwrite_title": "Disable synchronisation",
|
||||
"edt_dev_spec_targetIp_title": "Target IP-address",
|
||||
"edt_dev_spec_targetIpHost_title": "Target Hostname/IP-address",
|
||||
"edt_dev_spec_targetIpHost_title_info": "The device's hostname or IP-address",
|
||||
"edt_dev_spec_transeffect_title": "Transition effect",
|
||||
"edt_dev_spec_transistionTimeExtra_title": "Extra time darkness",
|
||||
"edt_dev_spec_transistionTime_title": "Transition time",
|
||||
"edt_dev_spec_transistionTimeExtra_title": "Extra time darkness",
|
||||
"edt_dev_spec_uid_title": "UID",
|
||||
"edt_dev_spec_universe_title": "Universe",
|
||||
"edt_dev_spec_useEntertainmentAPI_title": "Use Hue Entertainment API",
|
||||
@@ -538,16 +554,16 @@
|
||||
"edt_eff_collision_header": "color collision",
|
||||
"edt_eff_collision_header_desc": "Two color projectiles are sent from random positions and collide with each other",
|
||||
"edt_eff_color": "Color",
|
||||
"edt_eff_colorHour": "Color hour",
|
||||
"edt_eff_colorMarker": "Marker color",
|
||||
"edt_eff_colorMinute": "Color minute",
|
||||
"edt_eff_colorSecond": "Color second",
|
||||
"edt_eff_colorcount": "Color length",
|
||||
"edt_eff_colorend": "Color end",
|
||||
"edt_eff_colorendtime": "Time to hold start color",
|
||||
"edt_eff_colorevel": "Color level",
|
||||
"edt_eff_colorHour": "Color hour",
|
||||
"edt_eff_colorMarker": "Marker color",
|
||||
"edt_eff_colorMinute": "Color minute",
|
||||
"edt_eff_colorone": "Color one",
|
||||
"edt_eff_colorrandom": "Random color",
|
||||
"edt_eff_colorSecond": "Color second",
|
||||
"edt_eff_colorshift": "Color Shift",
|
||||
"edt_eff_colorstart": "Color start",
|
||||
"edt_eff_colorstarttime": "Time to hold end color",
|
||||
@@ -603,13 +619,13 @@
|
||||
"edt_eff_postcolor": "Post color",
|
||||
"edt_eff_rainbowmood_header": "Rainbow Mood",
|
||||
"edt_eff_rainbowmood_header_desc": "All LEDs rainbow mood",
|
||||
"edt_eff_randomCenter": "Random Center",
|
||||
"edt_eff_random_header": "Random",
|
||||
"edt_eff_random_header_desc": "Pixel Dot, dot, dot...",
|
||||
"edt_eff_randomCenter": "Random Center",
|
||||
"edt_eff_repeat": "Repeat",
|
||||
"edt_eff_repeatcount": "Repeat count",
|
||||
"edt_eff_reverseRandomTime": "Reverse every",
|
||||
"edt_eff_reversedirection": "Reverse direction",
|
||||
"edt_eff_reverseRandomTime": "Reverse every",
|
||||
"edt_eff_rotationtime": "Rotation time",
|
||||
"edt_eff_saturation": "Saturation",
|
||||
"edt_eff_showseconds": "Show seconds",
|
||||
@@ -647,23 +663,23 @@
|
||||
"edt_msg_button_expand": "Expand",
|
||||
"edt_msg_button_move_down_title": "Move down",
|
||||
"edt_msg_button_move_up_title": "Move up",
|
||||
"edt_msg_error_additionalItems": "No additional items allowed in this array",
|
||||
"edt_msg_error_additional_properties": "No additional properties allowed, but property $1 is set",
|
||||
"edt_msg_error_additionalItems": "No additional items allowed in this array",
|
||||
"edt_msg_error_anyOf": "Value must validate against at least one of the provided schemas",
|
||||
"edt_msg_error_dependency": "Must have property $1",
|
||||
"edt_msg_error_disallow": "Value must not be of type $1",
|
||||
"edt_msg_error_disallow_union": "Value must not be one of the provided disallowed types",
|
||||
"edt_msg_error_enum": "Value must be one of the enumerated values",
|
||||
"edt_msg_error_maximum_excl": "Value must be less than $1",
|
||||
"edt_msg_error_maximum_incl": "Value must be at most $1",
|
||||
"edt_msg_error_maxItems": "Value must have at most $1 items",
|
||||
"edt_msg_error_maxLength": "Value must be at most $1 characters long",
|
||||
"edt_msg_error_maxProperties": "Object must have at most $1 properties",
|
||||
"edt_msg_error_maximum_excl": "Value must be less than $1",
|
||||
"edt_msg_error_maximum_incl": "Value must be at most $1",
|
||||
"edt_msg_error_minimum_excl": "Value must be greater than $1",
|
||||
"edt_msg_error_minimum_incl": "Value must be at least $1",
|
||||
"edt_msg_error_minItems": "Value must have at least $1 items",
|
||||
"edt_msg_error_minLength": "Value must be at least $1 characters long",
|
||||
"edt_msg_error_minProperties": "Object must have at least $1 properties",
|
||||
"edt_msg_error_minimum_excl": "Value must be greater than $1",
|
||||
"edt_msg_error_minimum_incl": "Value must be at least $1",
|
||||
"edt_msg_error_multipleOf": "Value must be a multiple of $1",
|
||||
"edt_msg_error_not": "Value must not validate against the provided schema",
|
||||
"edt_msg_error_notempty": "Value required",
|
||||
@@ -698,6 +714,7 @@
|
||||
"general_btn_off": "Off",
|
||||
"general_btn_ok": "OK",
|
||||
"general_btn_on": "On",
|
||||
"general_btn_overwrite": "Overwrite",
|
||||
"general_btn_rename": "Rename",
|
||||
"general_btn_restarthyperion": "Restart Hyperion",
|
||||
"general_btn_save": "Save",
|
||||
@@ -745,20 +762,6 @@
|
||||
"general_speech_zh-CN": "Chinese (simplified)",
|
||||
"general_webui_title": "Hyperion - Web Configuration",
|
||||
"general_wiki_moreto": "More information to \"$1\" at our Wiki",
|
||||
"infoDialog_checklist_title": "Checklist!",
|
||||
"infoDialog_effconf_created_text": "The effect \"$1\" has been created successfully!",
|
||||
"infoDialog_effconf_deleted_text": "The effect \"$1\" has been deleted successfully!",
|
||||
"infoDialog_general_error_title": "Error",
|
||||
"infoDialog_general_success_title": "Success",
|
||||
"infoDialog_general_warning_title": "Warning",
|
||||
"infoDialog_import_comperror_text": "Sad! Your browser doesn't support a import. Please try again with another browser.",
|
||||
"infoDialog_import_confirm_text": "Are you sure to import \"$1\"? This process can't be reverted!",
|
||||
"infoDialog_import_confirm_title": "Confirm import",
|
||||
"infoDialog_import_hyperror_text": "The selected configuration file \"$1\" can't be imported. It's not compatible with Hyperion 2.0 and higher!",
|
||||
"infoDialog_import_jsonerror_text": "The selected configuration file \"$1\" is no .json file or it's corrupted. Error message: ($2)",
|
||||
"infoDialog_wizrgb_text": "Your RGB Byte Order is already well adjusted.",
|
||||
"infoDialog_writeconf_error_text": "Saving your configuration failed.",
|
||||
"infoDialog_writeimage_error_text": "The selected file \"$1\" is no image file or it's corrupted! Please select another image file.",
|
||||
"info_404": "The page you requested is not available!",
|
||||
"info_conlost_label_autorecon": "We reconnect again after Hyperion is available.",
|
||||
"info_conlost_label_autorefresh": "This page will be automatically refreshed.",
|
||||
@@ -772,6 +775,31 @@
|
||||
"info_restart_contusa": "...with your last steps. Thank you!",
|
||||
"info_restart_rightback": "Hyperion will be right back immediately!",
|
||||
"info_restart_title": "Restarts currently...",
|
||||
"InfoDialog_access_text": "Depending on settings level you could adjust more options or get access to more features. Recommended is the \"Default\" level.",
|
||||
"InfoDialog_access_title": "Settings level",
|
||||
"InfoDialog_changePassword_success": "Password successfully saved!",
|
||||
"InfoDialog_changePassword_title": "Change Password",
|
||||
"infoDialog_checklist_title": "Checklist!",
|
||||
"infoDialog_effconf_created_text": "The effect \"$1\" has been created successfully!",
|
||||
"infoDialog_effconf_deleted_text": "The effect \"$1\" has been deleted successfully!",
|
||||
"infoDialog_general_error_title": "Error",
|
||||
"infoDialog_general_success_title": "Success",
|
||||
"infoDialog_general_warning_title": "Warning",
|
||||
"infoDialog_import_comperror_text": "Sad! Your browser doesn't support a import. Please try again with another browser.",
|
||||
"infoDialog_import_confirm_text": "Are you sure to import \"$1\"? This process can't be reverted!",
|
||||
"infoDialog_import_confirm_title": "Confirm import",
|
||||
"infoDialog_import_hyperror_text": "The selected configuration file \"$1\" can't be imported. It's not compatible with Hyperion 2.0 and higher!",
|
||||
"infoDialog_import_jsonerror_text": "The selected configuration file \"$1\" is no .json file or it's corrupted. Error message: ($2)",
|
||||
"InfoDialog_iswitch_text": "If you run Hyperion more than once in your local network, you could switch between the web configurations. Select the Hyperion instance below and switch!",
|
||||
"InfoDialog_iswitch_title": "Hyperion switcher",
|
||||
"InfoDialog_lang_text": "If you don't like the result of the automatic language detection you could overwrite it here.",
|
||||
"InfoDialog_lang_title": "Language setting",
|
||||
"InfoDialog_nowrite_foottext": "The WebUI will be unlocked automatically after you solved the problem!",
|
||||
"InfoDialog_nowrite_text": "Hyperion can't write to your current loaded configuration file. Please repair the file permissions to proceed.",
|
||||
"InfoDialog_nowrite_title": "write permission error!",
|
||||
"infoDialog_wizrgb_text": "Your RGB Byte Order is already well adjusted.",
|
||||
"infoDialog_writeconf_error_text": "Saving your configuration failed.",
|
||||
"infoDialog_writeimage_error_text": "The selected file \"$1\" is no image file or it's corrupted! Please select another image file.",
|
||||
"main_ledsim_btn_togglelednumber": "LED numbers",
|
||||
"main_ledsim_btn_toggleleds": "Show LEDs",
|
||||
"main_ledsim_btn_togglelivevideo": "Live video",
|
||||
|
||||
Reference in New Issue
Block a user