mirror of
https://github.com/hyperion-project/hyperion.ng.git
synced 2023-10-10 13:36:59 +02:00
update adalight sketch (#299)
* rename platform rpi-pwm to rpi. remove original rpi platform install symlink to bin folder create effects folder for custom effects * fix osx jobs evaluation * - add rewrite time to serial leds - rework adalight sketch * add analog output * adalight: add analog mode: last led * tune adalight sketch to final state move refresh code to leddevice base class, so every leddevice can use it
This commit is contained in:
redPanther
GitHub
parent
6b3f0e42b5
commit
81dea1583d
@ -1,117 +1,239 @@
|
||||
#include "FastLED.h"
|
||||
|
||||
// How many leds in your strip?
|
||||
#define NUM_LEDS 240
|
||||
#define ANALOG_MODE_AVERAGE 0
|
||||
#define ANALOG_MODE_LAST_LED 1
|
||||
|
||||
// For led chips like Neopixels, which have a data line, ground, and power, you just
|
||||
// need to define DATA_PIN. For led chipsets that are SPI based (four wires - data, clock,
|
||||
// ground, and power), like the LPD8806 define both DATA_PIN and CLOCK_PIN
|
||||
#define DATA_PIN 6
|
||||
/**************************************
|
||||
S E T U P
|
||||
|
||||
set following values to your needs
|
||||
**************************************/
|
||||
|
||||
// Number of leds in your strip. set to 1 and ANALOG_OUTPUT_ENABLED to true to activate analog only
|
||||
#define NUM_LEDS 100
|
||||
|
||||
|
||||
#define SPI_LEDS false // connection type. Set "true" for 4 wire and "false" for 3 Wire stripes.
|
||||
#define LED_TYPE WS2812B // type of your led controller, possible values, see below
|
||||
|
||||
// 3 wire (pwm): NEOPIXEL BTM1829 TM1812 TM1809 TM1804 TM1803 UCS1903 UCS1903B UCS1904 UCS2903 WS2812 WS2852
|
||||
// S2812B SK6812 SK6822 APA106 PL9823 WS2811 WS2813 APA104 WS2811_40 GW6205 GW6205_40 LPD1886 LPD1886_8BIT
|
||||
// 4 wire (spi): LPD8806 WS2801 WS2803 SM16716 P9813 APA102 SK9822 DOTSTAR
|
||||
|
||||
// For 3 wire led stripes line Neopixel/Ws2812, which have a data line, ground, and power, you just need to define DATA_PIN.
|
||||
// For led chipsets that are SPI based (four wires - data, clock, ground, and power), both defines DATA_PIN and CLOCK_PIN are needed
|
||||
#define DATA_PIN 6
|
||||
#define CLOCK_PIN 13
|
||||
|
||||
#define COLOR_ORDER RGB
|
||||
#define COLOR_ORDER GRB // colororder of the stripe, set RGB in hyperion
|
||||
|
||||
#define OFF_TIMEOUT 15000 // ms to switch off after no data was received, set 0 to deactivate
|
||||
|
||||
// analog rgb uni color led stripe - using of hyperion smoothing is recommended
|
||||
// ATTENTION this pin config is default for atmega328 based arduinos, others might work to
|
||||
// if you have flickering analog leds this might be caused by unsynced pwm signals
|
||||
// try other pins is more or less the only thing that helps
|
||||
#define ANALOG_OUTPUT_ENABLED true
|
||||
#define ANALOG_MODE ANALOG_MODE_LAST_LED // use ANALOG_MODE_AVERAGE or ANALOG_MODE_LAST_LED
|
||||
#define ANALOG_GROUND_PIN 8 // additional ground pin to make wiring a bit easier
|
||||
#define ANALOG_RED_PIN 9
|
||||
#define ANALOG_GREEN_PIN 10
|
||||
#define ANALOG_BLUE_PIN 11
|
||||
|
||||
// overall color adjustments
|
||||
#define ANALOG_BRIGHTNESS_RED 255 // maximum brightness for analog 0-255
|
||||
#define ANALOG_BRIGHTNESS_GREEN 255 // maximum brightness for analog 0-255
|
||||
#define ANALOG_BRIGHTNESS_BLUE 255 // maximum brightness for analog 0-255
|
||||
|
||||
#define BRIGHTNESS 255 // maximum brightness 0-255
|
||||
#define DITHER_MODE BINARY_DITHER // BINARY_DITHER or DISABLE_DITHER
|
||||
#define COLOR_TEMPERATURE CRGB(255,255,255) // RGB value describing the color temperature
|
||||
#define COLOR_CORRECTION CRGB(255,255,255) // RGB value describing the color correction
|
||||
|
||||
// Baudrate, higher rate allows faster refresh rate and more LEDs (defined in /etc/boblight.conf)
|
||||
#define serialRate 460800 // use 115200 for ftdi based boards
|
||||
|
||||
|
||||
/**************************************
|
||||
A D A L I G H T C O D E
|
||||
|
||||
no user changes needed
|
||||
**************************************/
|
||||
|
||||
// Adalight sends a "Magic Word" (defined in /etc/boblight.conf) before sending the pixel data
|
||||
uint8_t prefix[] = {'A', 'd', 'a'}, hi, lo, chk, i;
|
||||
|
||||
// Baudrate, higher rate allows faster refresh rate and more LEDs (defined in /etc/boblight.conf)
|
||||
#define serialRate 460800
|
||||
unsigned long endTime;
|
||||
|
||||
// Define the array of leds
|
||||
CRGB leds[NUM_LEDS];
|
||||
|
||||
void setup() {
|
||||
// Uncomment/edit one of the following lines for your leds arrangement.
|
||||
// FastLED.addLeds<NEOPIXEL , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<BTM1829 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<TM1812 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<TM1809 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<TM1804 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<TM1803 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<UCS1903 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<UCS1903B , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<UCS1904 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<UCS2903 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<WS2812 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<WS2852 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
FastLED.addLeds<WS2812B , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<SK6812 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<SK6822 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<APA106 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<PL9823 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<WS2811 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<WS2813 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<APA104 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<WS2811_40 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<GW6205 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<GW6205_40 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<LPD1886 , DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<LPD1886_8BIT, DATA_PIN, RGB>(leds, NUM_LEDS);
|
||||
// set rgb to analog led stripe
|
||||
void showAnalogRGB(const CRGB& led) {
|
||||
if (ANALOG_OUTPUT_ENABLED) {
|
||||
byte r = map(led.r, 0,255,0,ANALOG_BRIGHTNESS_RED);
|
||||
byte g = map(led.g, 0,255,0,ANALOG_BRIGHTNESS_GREEN);
|
||||
byte b = map(led.b, 0,255,0,ANALOG_BRIGHTNESS_BLUE);
|
||||
analogWrite(ANALOG_RED_PIN , r);
|
||||
analogWrite(ANALOG_GREEN_PIN, g);
|
||||
analogWrite(ANALOG_BLUE_PIN , b);
|
||||
}
|
||||
}
|
||||
|
||||
// FastLED.addLeds<LPD8806, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<WS2801 , DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<WS2803 , DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<SM16716, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<P9813 , DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<APA102 , DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<SK9822 , DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
|
||||
// FastLED.addLeds<DOTSTAR, DATA_PIN, CLOCK_PIN, RGB>(leds, NUM_LEDS);
|
||||
// set color to all leds
|
||||
void showColor(const CRGB& led) {
|
||||
#if NUM_LEDS > 1 || ANALOG_OUTPUT_ENABLED == false
|
||||
LEDS.showColor(led);
|
||||
#endif
|
||||
showAnalogRGB(led);
|
||||
}
|
||||
|
||||
// switch of digital and analog leds
|
||||
void switchOff() {
|
||||
#if ANALOG_ONLY == false
|
||||
memset(leds, 0, NUM_LEDS * sizeof(struct CRGB));
|
||||
FastLED.show();
|
||||
#endif
|
||||
showAnalogRGB(leds[0]);
|
||||
}
|
||||
|
||||
// function to check if serial data is available
|
||||
// if timeout occured leds switch of, if configured
|
||||
bool checkIncommingData() {
|
||||
boolean dataAvailable = true;
|
||||
while (!Serial.available()) {
|
||||
if ( OFF_TIMEOUT > 0 && endTime < millis()) {
|
||||
switchOff();
|
||||
dataAvailable = false;
|
||||
endTime = millis() + OFF_TIMEOUT;
|
||||
}
|
||||
}
|
||||
|
||||
return dataAvailable;
|
||||
}
|
||||
|
||||
// main function that setups and runs the code
|
||||
void setup() {
|
||||
|
||||
// additional ground pin to make wiring a bit easier
|
||||
pinMode(ANALOG_GROUND_PIN, OUTPUT);
|
||||
digitalWrite(ANALOG_GROUND_PIN, LOW);
|
||||
|
||||
// analog output
|
||||
if (ANALOG_OUTPUT_ENABLED) {
|
||||
pinMode(ANALOG_BLUE_PIN , OUTPUT);
|
||||
pinMode(ANALOG_RED_PIN , OUTPUT);
|
||||
pinMode(ANALOG_GREEN_PIN, OUTPUT);
|
||||
}
|
||||
|
||||
// Uncomment/edit one of the following lines for your leds arrangement.
|
||||
int ledCount = NUM_LEDS;
|
||||
if (ANALOG_MODE == ANALOG_MODE_LAST_LED) {
|
||||
ledCount--;
|
||||
}
|
||||
|
||||
#if NUM_LEDS > 1 || ANALOG_OUTPUT_ENABLED == false
|
||||
#if SPI_LEDS == true
|
||||
FastLED.addLeds<LED_TYPE, DATA_PIN, CLOCK_PIN, COLOR_ORDER>(leds, ledCount);
|
||||
#else
|
||||
FastLED.addLeds<LED_TYPE, DATA_PIN, COLOR_ORDER>(leds, ledCount);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// color adjustments
|
||||
FastLED.setBrightness ( BRIGHTNESS );
|
||||
FastLED.setTemperature( COLOR_TEMPERATURE );
|
||||
FastLED.setCorrection ( COLOR_CORRECTION );
|
||||
FastLED.setDither ( DITHER_MODE );
|
||||
|
||||
// initial RGB flash
|
||||
LEDS.showColor(CRGB(255, 0, 0));
|
||||
delay(250);
|
||||
LEDS.showColor(CRGB(0, 255, 0));
|
||||
delay(250);
|
||||
LEDS.showColor(CRGB(0, 0, 255));
|
||||
delay(250);
|
||||
LEDS.showColor(CRGB(0, 0, 0));
|
||||
showColor(CRGB(255, 0, 0)); delay(400);
|
||||
showColor(CRGB(0, 255, 0)); delay(400);
|
||||
showColor(CRGB(0, 0, 255)); delay(400);
|
||||
showColor(CRGB(0, 0, 0));
|
||||
|
||||
Serial.begin(serialRate);
|
||||
Serial.print("Ada\n"); // Send "Magic Word" string to host
|
||||
|
||||
}
|
||||
|
||||
boolean transmissionSuccess;
|
||||
unsigned long sum_r, sum_g, sum_b;
|
||||
|
||||
// loop() is avoided as even that small bit of function overhead
|
||||
// has a measurable impact on this code's overall throughput.
|
||||
while (true) {
|
||||
// wait for first byte of Magic Word
|
||||
for (i = 0; i < sizeof prefix; ++i) {
|
||||
// If next byte is not in Magic Word, the start over
|
||||
if (!checkIncommingData() || prefix[i] != Serial.read()) {
|
||||
i = 0;
|
||||
}
|
||||
}
|
||||
|
||||
// Hi, Lo, Checksum
|
||||
if (!checkIncommingData()) continue;
|
||||
hi = Serial.read();
|
||||
if (!checkIncommingData()) continue;
|
||||
lo = Serial.read();
|
||||
if (!checkIncommingData()) continue;
|
||||
chk = Serial.read();
|
||||
|
||||
// if checksum does not match go back to wait
|
||||
if (chk != (hi ^ lo ^ 0x55)) continue;
|
||||
|
||||
memset(leds, 0, NUM_LEDS * sizeof(struct CRGB));
|
||||
transmissionSuccess = true;
|
||||
sum_r = 0;
|
||||
sum_g = 0;
|
||||
sum_b = 0;
|
||||
|
||||
// read the transmission data and set LED values
|
||||
for (uint8_t idx = 0; idx < NUM_LEDS; idx++) {
|
||||
byte r, g, b;
|
||||
if (!checkIncommingData()) {
|
||||
transmissionSuccess = false;
|
||||
break;
|
||||
}
|
||||
r = Serial.read();
|
||||
if (!checkIncommingData()) {
|
||||
transmissionSuccess = false;
|
||||
break;
|
||||
}
|
||||
g = Serial.read();
|
||||
if (!checkIncommingData()) {
|
||||
transmissionSuccess = false;
|
||||
break;
|
||||
}
|
||||
b = Serial.read();
|
||||
leds[idx].r = r;
|
||||
leds[idx].g = g;
|
||||
leds[idx].b = b;
|
||||
#if ANALOG_OUTPUT_ENABLED == true && ANALOG_MODE == ANALOG_MODE_AVERAGE
|
||||
sum_r += r;
|
||||
sum_g += g;
|
||||
sum_b += b;
|
||||
#endif
|
||||
}
|
||||
|
||||
// shows new values
|
||||
if (transmissionSuccess) {
|
||||
endTime = millis() + OFF_TIMEOUT;
|
||||
#if NUM_LEDS > 1 || ANALOG_OUTPUT_ENABLED == false
|
||||
FastLED.show();
|
||||
#endif
|
||||
|
||||
#if ANALOG_OUTPUT_ENABLED == true
|
||||
#if ANALOG_MODE == ANALOG_MODE_LAST_LED
|
||||
showAnalogRGB(leds[NUM_LEDS-1]);
|
||||
#else
|
||||
showAnalogRGB(CRGB(sum_r/NUM_LEDS, sum_g/NUM_LEDS, sum_b/NUM_LEDS));
|
||||
#endif
|
||||
#endif
|
||||
}
|
||||
}
|
||||
} // end of setup
|
||||
|
||||
|
||||
void loop() {
|
||||
// wait for first byte of Magic Word
|
||||
for (i = 0; i < sizeof prefix; ++i) {
|
||||
waitLoop: while (!Serial.available()) ;;
|
||||
// Check next byte in Magic Word
|
||||
if (prefix[i] == Serial.read()) continue;
|
||||
// otherwise, start over
|
||||
i = 0;
|
||||
goto waitLoop;
|
||||
}
|
||||
|
||||
// Hi, Lo, Checksum
|
||||
|
||||
while (!Serial.available()) ;;
|
||||
hi = Serial.read();
|
||||
while (!Serial.available()) ;;
|
||||
lo = Serial.read();
|
||||
while (!Serial.available()) ;;
|
||||
chk = Serial.read();
|
||||
|
||||
// if checksum does not match go back to wait
|
||||
if (chk != (hi ^ lo ^ 0x55))
|
||||
{
|
||||
i = 0;
|
||||
goto waitLoop;
|
||||
}
|
||||
|
||||
memset(leds, 0, NUM_LEDS * sizeof(struct CRGB));
|
||||
// read the transmission data and set LED values
|
||||
for (uint8_t i = 0; i < NUM_LEDS; i++) {
|
||||
byte r, g, b;
|
||||
while (!Serial.available());
|
||||
r = Serial.read();
|
||||
while (!Serial.available());
|
||||
g = Serial.read();
|
||||
while (!Serial.available());
|
||||
b = Serial.read();
|
||||
leds[i].r = r;
|
||||
leds[i].g = g;
|
||||
leds[i].b = b;
|
||||
}
|
||||
// shows new values
|
||||
FastLED.show();
|
||||
// Not used. See note in setup() function.
|
||||
}
|
||||
|
||||
@ -12,6 +12,8 @@
|
||||
#include <map>
|
||||
#include <algorithm>
|
||||
|
||||
#include <QTimer>
|
||||
|
||||
// Utility includes
|
||||
#include <utils/ColorRgb.h>
|
||||
#include <utils/ColorRgbw.h>
|
||||
@ -81,4 +83,15 @@ protected:
|
||||
static int _ledCount;
|
||||
static int _ledRGBCount;
|
||||
static int _ledRGBWCount;
|
||||
|
||||
/// Timer object which makes sure that led data is written at a minimum rate
|
||||
/// e.g. Adalight device will switch off when it does not receive data at least every 15 seconds
|
||||
QTimer _refresh_timer;
|
||||
|
||||
protected slots:
|
||||
/// Write the last data to the leds again
|
||||
int rewriteLeds();
|
||||
|
||||
private:
|
||||
std::vector<ColorRgb> _ledValues;
|
||||
};
|
||||
|
||||
@ -17,9 +17,14 @@ LedDevice::LedDevice()
|
||||
, _log(Logger::getInstance("LedDevice"))
|
||||
, _ledBuffer(0)
|
||||
, _deviceReady(true)
|
||||
|
||||
, _refresh_timer()
|
||||
{
|
||||
LedDevice::getLedDeviceSchemas();
|
||||
|
||||
// setup timer
|
||||
_refresh_timer.setSingleShot(false);
|
||||
_refresh_timer.setInterval(0);
|
||||
connect(&_refresh_timer, SIGNAL(timeout()), this, SLOT(rewriteLeds()));
|
||||
}
|
||||
|
||||
// dummy implemention
|
||||
@ -103,7 +108,17 @@ QJsonObject LedDevice::getLedDeviceSchemas()
|
||||
|
||||
int LedDevice::setLedValues(const std::vector<ColorRgb>& ledValues)
|
||||
{
|
||||
return _deviceReady ? write(ledValues) : -1;
|
||||
if (!_deviceReady)
|
||||
return -1;
|
||||
|
||||
_ledValues = ledValues;
|
||||
|
||||
// restart the timer
|
||||
if (_refresh_timer.interval() > 0)
|
||||
{
|
||||
_refresh_timer.start();
|
||||
}
|
||||
return write(ledValues);
|
||||
}
|
||||
|
||||
int LedDevice::switchOff()
|
||||
@ -118,3 +133,8 @@ void LedDevice::setLedCount(int ledCount)
|
||||
_ledRGBCount = _ledCount * sizeof(ColorRgb);
|
||||
_ledRGBWCount = _ledCount * sizeof(ColorRgbw);
|
||||
}
|
||||
|
||||
int LedDevice::rewriteLeds()
|
||||
{
|
||||
return write(_ledValues);
|
||||
}
|
||||
|
||||
@ -2,7 +2,6 @@
|
||||
|
||||
LedDeviceAdalight::LedDeviceAdalight(const QJsonObject &deviceConfig)
|
||||
: ProviderRs232()
|
||||
|
||||
{
|
||||
_deviceReady = init(deviceConfig);
|
||||
}
|
||||
|
||||
@ -17,16 +17,7 @@ ProviderRs232::ProviderRs232()
|
||||
, _bytesWritten(0)
|
||||
, _frameDropCounter(0)
|
||||
, _lastError(QSerialPort::NoError)
|
||||
, _timer()
|
||||
{
|
||||
// setup timer
|
||||
_timer.setSingleShot(false);
|
||||
_timer.setInterval(1000);
|
||||
connect(&_timer, SIGNAL(timeout()), this, SLOT(rewriteLeds()));
|
||||
|
||||
// start the timer
|
||||
_timer.start();
|
||||
|
||||
connect(&_rs232Port, SIGNAL(error(QSerialPort::SerialPortError)), this, SLOT(error(QSerialPort::SerialPortError)));
|
||||
connect(&_rs232Port, SIGNAL(bytesWritten(qint64)), this, SLOT(bytesWritten(qint64)));
|
||||
connect(&_rs232Port, SIGNAL(readyRead()), this, SLOT(readyRead()));
|
||||
@ -38,7 +29,7 @@ bool ProviderRs232::init(const QJsonObject &deviceConfig)
|
||||
_deviceName = deviceConfig["output"].toString().toStdString();
|
||||
_baudRate_Hz = deviceConfig["rate"].toInt();
|
||||
_delayAfterConnect_ms = deviceConfig["delayAfterConnect"].toInt(250);
|
||||
_timer.setInterval ( deviceConfig["rewriteTime"].toInt(5000) );
|
||||
_refresh_timer.setInterval( deviceConfig["rewriteTime"].toInt(5000) );
|
||||
|
||||
return true;
|
||||
}
|
||||
@ -157,8 +148,6 @@ bool ProviderRs232::tryOpen(const int delayAfterConnect_ms)
|
||||
|
||||
int ProviderRs232::writeBytes(const qint64 size, const uint8_t * data)
|
||||
{
|
||||
// restart the timer
|
||||
_timer.start();
|
||||
if (! _blockedForDelay)
|
||||
{
|
||||
if (!_rs232Port.isOpen())
|
||||
|
||||
@ -46,15 +46,12 @@ protected:
|
||||
* @param[in[ size The length of the data
|
||||
* @param[in] data The data
|
||||
*
|
||||
* @return Zero on succes else negative
|
||||
* @return Zero on success else negative
|
||||
*/
|
||||
int writeBytes(const qint64 size, const uint8_t *data);
|
||||
|
||||
void closeDevice();
|
||||
|
||||
/// The RS232 serial-device
|
||||
QSerialPort _rs232Port;
|
||||
|
||||
private slots:
|
||||
/// Write the last data to the leds again
|
||||
int rewriteLeds();
|
||||
@ -79,7 +76,7 @@ protected:
|
||||
int _delayAfterConnect_ms;
|
||||
|
||||
/// The RS232 serial-device
|
||||
// QSerialPort _rs232Port;
|
||||
QSerialPort _rs232Port;
|
||||
|
||||
bool _blockedForDelay;
|
||||
|
||||
@ -89,9 +86,4 @@ protected:
|
||||
qint64 _bytesWritten;
|
||||
qint64 _frameDropCounter;
|
||||
QSerialPort::SerialPortError _lastError;
|
||||
|
||||
/// Timer object which makes sure that led data is written at a minimum rate
|
||||
/// e.g. Adalight device will switch off when it does not receive data at least
|
||||
/// every 15 seconds
|
||||
QTimer _timer;
|
||||
};
|
||||
|
||||
@ -19,6 +19,13 @@
|
||||
"default": 250,
|
||||
"append" : "ms",
|
||||
"propertyOrder" : 3
|
||||
},
|
||||
"rewriteTime": {
|
||||
"type": "integer",
|
||||
"title":"refresh time",
|
||||
"default": 5000,
|
||||
"append" : "ms",
|
||||
"propertyOrder" : 4
|
||||
}
|
||||
},
|
||||
"additionalProperties": true
|
||||
|
||||
@ -19,6 +19,13 @@
|
||||
"default": 250,
|
||||
"append" : "ms",
|
||||
"propertyOrder" : 3
|
||||
},
|
||||
"rewriteTime": {
|
||||
"type": "integer",
|
||||
"title":"refresh time",
|
||||
"default": 5000,
|
||||
"append" : "ms",
|
||||
"propertyOrder" : 4
|
||||
}
|
||||
},
|
||||
"additionalProperties": true
|
||||
|
||||
@ -19,6 +19,13 @@
|
||||
"default": 250,
|
||||
"append" : "ms",
|
||||
"propertyOrder" : 3
|
||||
},
|
||||
"rewriteTime": {
|
||||
"type": "integer",
|
||||
"title":"refresh time",
|
||||
"default": 5000,
|
||||
"append" : "ms",
|
||||
"propertyOrder" : 4
|
||||
}
|
||||
},
|
||||
"additionalProperties": true
|
||||
|
||||
@ -23,6 +23,13 @@
|
||||
"title":"Delay after connect",
|
||||
"default": 250,
|
||||
"propertyOrder" : 3
|
||||
},
|
||||
"rewriteTime": {
|
||||
"type": "integer",
|
||||
"title":"refresh time",
|
||||
"default": 5000,
|
||||
"append" : "ms",
|
||||
"propertyOrder" : 4
|
||||
}
|
||||
},
|
||||
"additionalProperties": true
|
||||
|
||||
@ -18,6 +18,13 @@
|
||||
"title":"Delay after connect",
|
||||
"default": 250,
|
||||
"propertyOrder" : 3
|
||||
},
|
||||
"rewriteTime": {
|
||||
"type": "integer",
|
||||
"title":"refresh time",
|
||||
"default": 5000,
|
||||
"append" : "ms",
|
||||
"propertyOrder" : 4
|
||||
}
|
||||
},
|
||||
"additionalProperties": true
|
||||
|
||||
@ -18,6 +18,13 @@
|
||||
"title":"Delay after connect",
|
||||
"default": 250,
|
||||
"propertyOrder" : 3
|
||||
},
|
||||
"rewriteTime": {
|
||||
"type": "integer",
|
||||
"title":"refresh time",
|
||||
"default": 5000,
|
||||
"append" : "ms",
|
||||
"propertyOrder" : 4
|
||||
}
|
||||
},
|
||||
"additionalProperties": true
|
||||
|
||||
Loading…
Reference in New Issue
Block a user