Merge remote-tracking branch 'remotes/origin/add_effect_engine' into add_effect_engine

Former-commit-id: c7f7fe4307f7dfaddaef23b71c6ead3491d0e669

libsrc/boblightserver/BoblightClientConnection.cpp

@@ -133,7 +133,8 @@ void BoblightClientConnection::handleMessage(const QString & message)
 					if (messageParts[3] == "rgb" && messageParts.size() == 7)
 					{
 						bool rc1, rc2, rc3;
-						uint8_t red = 255 * messageParts[4].toFloat(&rc1);
+						uint8_t red = qMax(0, qMin(255, int(255 * messageParts[4].toFloat(&rc1))));
+
 						if (!rc1)
 						{
 							// maybe a locale issue. switch to a locale with a comma instead of a dot as decimal seperator (or vice versa)
@@ -141,11 +142,11 @@ void BoblightClientConnection::handleMessage(const QString & message)
 							_locale.setNumberOptions(QLocale::OmitGroupSeparator | QLocale::RejectGroupSeparator);
 
 							// try again
-							red = 255 * messageParts[4].toFloat(&rc1);
+							red = qMax(0, qMin(255, int(255 * messageParts[4].toFloat(&rc1))));
 						}
 
-						uint8_t green = 255 * messageParts[5].toFloat(&rc2);
-						uint8_t blue  = 255 * messageParts[6].toFloat(&rc3);
+						uint8_t green = qMax(0, qMin(255, 255 * int(messageParts[5].toFloat(&rc2))));
+						uint8_t blue  = qMax(0, qMin(255, 255 * int(messageParts[6].toFloat(&rc3))));
 
 						if (rc1 && rc2 && rc3)
 						{
@@ -153,6 +154,13 @@ void BoblightClientConnection::handleMessage(const QString & message)
 							rgb.red = red;
 							rgb.green = green;
 							rgb.blue = blue;
+
+							// send current color values to hyperion if this is the last led assuming leds values are send in order of id
+							if ((ledIndex == _ledColors.size() -1) && _priority < 255)
+							{
+								_hyperion->setColors(_priority, _ledColors, -1);
+							}
+
 							return;
 						}
 					}

libsrc/hyperion/CMakeLists.txt

@@ -40,6 +40,7 @@ SET(Hyperion_HEADERS
 		${CURRENT_SOURCE_DIR}/device/LedDeviceLpd6803.h
 		${CURRENT_SOURCE_DIR}/device/LedDeviceLpd8806.h
 		${CURRENT_SOURCE_DIR}/device/LedDeviceLightpack.h
+		${CURRENT_SOURCE_DIR}/device/LedDevicePaintpack.h
 		${CURRENT_SOURCE_DIR}/device/LedDeviceMultiLightpack.h
 )
 
@@ -65,6 +66,7 @@ SET(Hyperion_SOURCES
 		${CURRENT_SOURCE_DIR}/device/LedDeviceLpd8806.cpp
 		${CURRENT_SOURCE_DIR}/device/LedDeviceAdalight.cpp
 		${CURRENT_SOURCE_DIR}/device/LedDeviceLightpack.cpp
+		${CURRENT_SOURCE_DIR}/device/LedDevicePaintpack.cpp
 		${CURRENT_SOURCE_DIR}/device/LedDeviceMultiLightpack.cpp
 )
 
@@ -87,6 +89,7 @@ add_library(hyperion
 target_link_libraries(hyperion
 		hyperion-utils
 		effectengine
+		hidapi-libusb
 		serialport
 		${LIBUSB_1_LIBRARIES} #apt-get install libusb-1.0-0-dev
 		${CMAKE_THREAD_LIBS_INIT}

libsrc/hyperion/Hyperion.cpp

@@ -23,6 +23,7 @@
 #include "device/LedDeviceTest.h"
 #include "device/LedDeviceWs2801.h"
 #include "device/LedDeviceAdalight.h"
+#include "device/LedDevicePaintpack.h"
 #include "device/LedDeviceLightpack.h"
 #include "device/LedDeviceMultiLightpack.h"
 
@@ -40,7 +41,7 @@ LedDevice* Hyperion::createDevice(const Json::Value& deviceConfig)
 	std::transform(type.begin(), type.end(), type.begin(), ::tolower);
 
 	LedDevice* device = nullptr;
-	if (type == "ws2801")
+	if (type == "ws2801" || type == "lightberry")
 	{
 		const std::string output = deviceConfig["output"].asString();
 		const unsigned rate      = deviceConfig["rate"].asInt();
@@ -99,6 +100,13 @@ LedDevice* Hyperion::createDevice(const Json::Value& deviceConfig)
 
 		device = deviceLightpack;
 	}
+	else if (type == "paintpack")
+	{
+		LedDevicePaintpack * devicePainLightpack = new LedDevicePaintpack();
+		devicePainLightpack->open();
+
+		device = devicePainLightpack;
+	}
 	else if (type == "multi-lightpack")
 	{
 		LedDeviceMultiLightpack* deviceLightpack = new LedDeviceMultiLightpack();

libsrc/hyperion/device/LedDevicePaintpack.cpp

@@ -0,0 +1,77 @@
+
+// Hyperion includes
+#include "LedDevicePaintpack.h"
+
+LedDevicePaintpack::LedDevicePaintpack() :
+	LedDevice(),
+	_deviceHandle(nullptr)
+{
+	// empty
+}
+
+int LedDevicePaintpack::open()
+{
+	// initialize the usb context
+	int error = hid_init();
+	if (error != 0)
+	{
+		std::cerr << "Error while initializing the hidapi context" << std::endl;
+		return -1;
+	}
+	std::cout << "Hidapi initialized" << std::endl;
+
+	// Initialise the paintpack device
+	const unsigned short Paintpack_VendorId  = 0x0ebf;
+	const unsigned short Paintpack_ProductId = 0x0025;
+	_deviceHandle = hid_open(Paintpack_VendorId, Paintpack_ProductId, nullptr);
+	if (_deviceHandle == nullptr)
+	{
+		// Failed to open the device
+		std::cerr << "Failed to open HID Paintpakc device " << std::endl;
+		return -1;
+	}
+
+	return 0;
+}
+
+LedDevicePaintpack::~LedDevicePaintpack()
+{
+	if (_deviceHandle != nullptr)
+	{
+		hid_close(_deviceHandle);
+		_deviceHandle = nullptr;
+	}
+
+	hid_exit();
+}
+
+int LedDevicePaintpack::write(const std::vector<ColorRgb>& ledValues)
+{
+	if (_ledBuffer.size() < 3 + ledValues.size()*3)
+	{
+		_ledBuffer.resize(3 + ledValues.size()*3, uint8_t(0));
+
+		_ledBuffer[0] = 0;
+		_ledBuffer[1] = 3;
+		_ledBuffer[2] = 0;
+	}
+
+	auto bufIt = _ledBuffer.begin()+3;
+	for (const ColorRgb & ledValue : ledValues)
+	{
+		*bufIt = ledValue.red;
+		++bufIt;
+		*bufIt = ledValue.green;
+		++bufIt;
+		*bufIt = ledValue.blue;
+		++bufIt;
+	}
+
+	return hid_write(_deviceHandle, _ledBuffer.data(), _ledBuffer.size());
+}
+
+int LedDevicePaintpack::switchOff()
+{
+	std::fill(_ledBuffer.begin()+3, _ledBuffer.end(), uint8_t(0));
+	return hid_write(_deviceHandle, _ledBuffer.data(), _ledBuffer.size());
+}

libsrc/hyperion/device/LedDevicePaintpack.h

@@ -0,0 +1,59 @@
+#pragma once
+
+// STL includes
+#include <vector>
+
+// libusb include
+#include <hidapi/hidapi.h>
+
+// Hyperion includes
+#include <hyperion/LedDevice.h>
+
+///
+/// LedDevice implementation for a paintpack device ()
+///
+class LedDevicePaintpack : public LedDevice
+{
+public:
+	/**
+	 * Constructs the paintpack device
+	 */
+	LedDevicePaintpack();
+
+	/**
+	 * Destructs the paintpack device, closes USB connection if open
+	 */
+	virtual ~LedDevicePaintpack();
+
+	/**
+	 * Opens the Paintpack device
+	 *
+	 * @return Zero on succes else negative
+	 */
+	int open();
+
+	///
+	/// Writes the RGB-Color values to the leds.
+	///
+	/// @param[in] ledValues  The RGB-color per led
+	///
+	/// @return Zero on success else negative
+	///
+	virtual int write(const std::vector<ColorRgb>& ledValues);
+
+	///
+	/// Switch the leds off
+	///
+	/// @return Zero on success else negative
+	///
+	virtual int switchOff();
+
+private:
+	/// libusb device handle
+	hid_device * _deviceHandle;
+
+	/// buffer for led data
+	std::vector<uint8_t> _ledBuffer;
+
+
+};

libsrc/jsonserver/JsonClientConnection.cpp

@@ -114,10 +114,33 @@ void JsonClientConnection::handleColorCommand(const Json::Value &message)
 	// extract parameters
 	int priority = message["priority"].asInt();
 	int duration = message.get("duration", -1).asInt();
-	ColorRgb color = {uint8_t(message["color"][0u].asInt()), uint8_t(message["color"][1u].asInt()), uint8_t(message["color"][2u].asInt())};
+
+	std::vector<ColorRgb> colorData(_hyperion->getLedCount());
+	const Json::Value & jsonColor = message["color"];
+	Json::UInt i = 0;
+	for (; i < jsonColor.size()/3 && i < _hyperion->getLedCount(); ++i)
+	{
+		colorData[i].red = uint8_t(message["color"][3u*i].asInt());
+		colorData[i].green = uint8_t(message["color"][3u*i+1u].asInt());
+		colorData[i].blue = uint8_t(message["color"][3u*i+2u].asInt());
+	}
+
+	// copy full blocks of led colors
+	unsigned size = i;
+	while (i + size < _hyperion->getLedCount())
+	{
+		memcpy(&(colorData[i]), colorData.data(), size * sizeof(ColorRgb));
+		i += size;
+	}
+
+	// copy remaining block of led colors
+	if (i < _hyperion->getLedCount())
+	{
+		memcpy(&(colorData[i]), colorData.data(), (_hyperion->getLedCount()-i) * sizeof(ColorRgb));
+	}
 
 	// set output
-	_hyperion->setColor(priority, color, duration);
+	_hyperion->setColors(priority, colorData, duration);
 
 	// send reply
 	sendSuccessReply();

libsrc/jsonserver/schema/schema-color.json

@@ -21,8 +21,7 @@
             "items" :{
                 "type" : "integer"
             },
-            "minItems": 3,
-            "maxItems": 3
+            "minItems": 3
         }
     },
     "additionalProperties": false

src/hyperion-remote/CustomParameter.h

@@ -11,7 +11,7 @@
 #include "ColorTransformValues.h"
 
 /// Data parameter for a color
-typedef vlofgren::PODParameter<QColor> ColorParameter;
+typedef vlofgren::PODParameter<std::vector<QColor>> ColorParameter;
 
 /// Data parameter for an image
 typedef vlofgren::PODParameter<QImage> ImageParameter;
@@ -21,40 +21,54 @@ typedef vlofgren::PODParameter<ColorTransformValues> TransformParameter;
 
 namespace vlofgren {
 	///
-	/// Translates a string (as passed on the commandline) to a color
+	/// Translates a string (as passed on the commandline) to a vector of colors
 	///
 	/// @param[in] s The string (as passed on the commandline)
 	///
-	/// @return The translated color
+	/// @return The translated colors
 	///
 	/// @throws Parameter::ParameterRejected If the string did not result in a color
 	///
 	template<>
-	QColor ColorParameter::validate(const std::string& s) throw (Parameter::ParameterRejected)
+	std::vector<QColor> ColorParameter::validate(const std::string& s) throw (Parameter::ParameterRejected)
 	{
 		// Check if we can create the color by name
 		QColor color(s.c_str());
 		if (color.isValid())
 		{
-			return color;
+			return std::vector<QColor>{color};
 		}
 
 		// check if we can create the color by hex RRGGBB value
-		if (s.length() == 6 && isxdigit(s[0]) && isxdigit(s[1]) && isxdigit(s[2]) && isxdigit(s[3]) && isxdigit(s[4]) && isxdigit(s[5]))
+		if (s.length() >= 6u && (s.length()%6) == 0u && std::count_if(s.begin(), s.end(), isxdigit) == s.length())
 		{
 			bool ok = true;
+			std::vector<QColor> colors;
+
+			for (size_t j = 0; j < s.length()/6; ++j)
+			{
 				int rgb[3];
 				for (int i = 0; i < 3 && ok; ++i)
 				{
-				QString colorComponent(s.substr(2*i, 2).c_str());
+					QString colorComponent(s.substr(6*j+2*i, 2).c_str());
 					rgb[i] = colorComponent.toInt(&ok, 16);
 				}
 
+				if (ok)
+				{
+					color.setRgb(rgb[0], rgb[1], rgb[2]);
+					colors.push_back(color);
+				}
+				else
+				{
+					break;
+				}
+			}
+
 			// check if all components parsed succesfully
 			if (ok)
 			{
-				color.setRgb(rgb[0], rgb[1], rgb[2]);
-				return color;
+				return colors;
 			}
 		}
 
@@ -65,7 +79,7 @@ namespace vlofgren {
 		}
 		throw Parameter::ParameterRejected(errorMessage.str());
 
-		return color;
+		return std::vector<QColor>{color};
 	}
 
 	template<>

src/hyperion-remote/JsonConnection.cpp

@@ -39,18 +39,21 @@ JsonConnection::~JsonConnection()
 	_socket.close();
 }
 
-void JsonConnection::setColor(QColor color, int priority, int duration)
+void JsonConnection::setColor(std::vector<QColor> colors, int priority, int duration)
 {
-	std::cout << "Set color to " << color.red() << " " << color.green() << " " << color.blue() << std::endl;
+	std::cout << "Set color to " << colors[0].red() << " " << colors[0].green() << " " << colors[0].blue() << (colors.size() > 1 ? " + ..." : "") << std::endl;
 
 	// create command
 	Json::Value command;
 	command["command"] = "color";
 	command["priority"] = priority;
 	Json::Value & rgbValue = command["color"];
-	rgbValue[0] = color.red();
-	rgbValue[1] = color.green();
-	rgbValue[2] = color.blue();
+	for (const QColor & color : colors)
+	{
+		rgbValue.append(color.red());
+		rgbValue.append(color.green());
+		rgbValue.append(color.blue());
+	}
 	if (duration > 0)
 	{
 		command["duration"] = duration;

src/hyperion-remote/JsonConnection.h

@@ -41,7 +41,7 @@ public:
 	/// @param priority The priority
 	/// @param duration The duration in milliseconds
 	///
-	void setColor(QColor color, int priority, int duration);
+	void setColor(std::vector<QColor> color, int priority, int duration);
 
 	///
 	/// Set the leds according to the given image (assume the image is stretched to the display size)

src/hyperion-remote/hyperion-remote.cpp

@@ -40,7 +40,7 @@ int main(int argc, char * argv[])
 		StringParameter    & argAddress    = parameters.add<StringParameter>   ('a', "address"   , QString("Set the address of the hyperion server [default: %1]").arg(defaultServerAddress).toAscii().constData());
 		IntParameter       & argPriority   = parameters.add<IntParameter>      ('p', "priority"  , QString("Use to the provided priority channel (the lower the number, the higher the priority) [default: %1]").arg(defaultPriority).toAscii().constData());
 		IntParameter       & argDuration   = parameters.add<IntParameter>      ('d', "duration"  , "Specify how long the leds should be switched on in millseconds [default: infinity]");
-		ColorParameter     & argColor      = parameters.add<ColorParameter>    ('c', "color"     , "Set all leds to a constant color (either RRGGBB hex value or a color name)");
+		ColorParameter     & argColor      = parameters.add<ColorParameter>    ('c', "color"     , "Set all leds to a constant color (either RRGGBB hex value or a color name. The color may be repeated multiple time like: RRGGBBRRGGBB)");
 		ImageParameter     & argImage      = parameters.add<ImageParameter>    ('i', "image"     , "Set the leds to the colors according to the given image file");
 		StringParameter    & argEffect     = parameters.add<StringParameter>   ('e', "effect"    , "Enable the effect with the given name");
 		StringParameter    & argEffectArgs = parameters.add<StringParameter>   (0x0, "effectArgs", "Arguments to use in combination with the specified effect. Should be a Json object string.");