Details coming soon.

config/hyperion.config.json.commented

@@ -43,7 +43,7 @@
 	///      * 'id'     : The unique identifier of the channel adjustments (eg 'device_1')
 	///      * 'leds'   : The indices (or index ranges) of the leds to which this channel adjustment applies
 	///            (eg '0-5, 9, 11, 12-17'). The indices are zero based.
-	///      * 'black'/'white'/'red'/'green'/'blue'/'cyan'/'magenta'/'yellow' : Array of RGB to adjust the output color
+	///      * 'white'/'red'/'green'/'blue'/'cyan'/'magenta'/'yellow' : Array of RGB to adjust the output color
 	///      * 'gammaRed'/'gammaGreen'/'gammaBlue'  : Gamma value for each channel
 	///      * 'id'     : The unique identifier of the channel adjustments (eg 'device_1')
 	///      * 'id'     : The unique identifier of the channel adjustments (eg 'device_1')
@@ -60,7 +60,6 @@
 			{
 				"id"   : "default",
 				"leds" : "*",
-				"black"   : [0,0,0],
 				"white"   : [255,255,255],
 				"red"     : [255,0,0],
 				"green"   : [0,255,0],
@@ -99,15 +98,10 @@
 	},
 
 	/// Configuration for the embedded V4L2 grabber
-	///  * enable               : Enable or disable the v4lgrabber (true/false)
 	///  * device               : V4L2 Device to use [default="/dev/video0"]
 	///  * input                : V4L2 input to use [default=0]
-	///  * standard             : Video standard (PAL/NTSC/SECAM) [default="PAL"]
-	///  * width                : V4L2 width to set [default=-1]
-	///  * height               : V4L2 height to set [default=-1]
-	///  * frameDecimation      : Frame decimation factor [default=2]
+	///  * standard             : Video standard (PAL/NTSC/SECAM/NO_CHANGE) [default="NO_CHANGE"]
 	///  * sizeDecimation       : Size decimation factor [default=8]
-	///  * priority             : Hyperion priority channel [default=900]
 	///  * cropLeft             : Cropping from the left [default=0]
 	///  * cropRight            : Cropping from the right [default=0]
 	///  * cropTop              : Cropping from the top [default=0]
@@ -123,13 +117,9 @@
 	"grabberV4L2" :
 	[
 		{
-			"enable"   : false,
 			"device"   : "auto",
 			"input"    : 0,
-			"standard" : "PAL",
-			"width"    : 0,
-			"height"   : 0,
-			"frameDecimation" : 2,
+			"standard" : "NO_CHANGE",
 			"sizeDecimation"  : 8,
 			"priority"    : 240,
 			"cropLeft"    : 0,
@@ -148,20 +138,16 @@
 	],
 
 	///  The configuration for the frame-grabber, contains the following items:
-	///   * enable       : true if the framegrabber (platform grabber) should be activated
 	///   * type         : type of grabber. (auto|osx|dispmanx|amlogic|x11|framebuffer) [auto]
 	///   * width        : The width of the grabbed frames [pixels]
 	///   * height       : The height of the grabbed frames [pixels]
 	///   * frequency_Hz : The frequency of the frame grab [Hz]
-	///   * priority     : The priority of the frame-gabber (Default=250) HINT: lower value result in HIGHER priority!
 	///   * ATTENTION    : Power-of-Two resolution is not supported and leads to unexpected behaviour!
 	"framegrabber" :
 	{
 		// for all type of grabbers
-		"enable"       : true,
 		"type"         : "framebuffer",
 		"frequency_Hz" : 10,
-		"priority"     : 250,
 		"cropLeft"     : 0,
 		"cropRight"    : 0,
 		"cropTop"      : 0,
@@ -172,9 +158,7 @@
 		"height"       : 96,
 
 		// valid for x11
-		"useXGetImage"              : false,
-		"horizontalPixelDecimation" : 8,
-		"verticalPixelDecimation"   : 8,
+		"pixelDecimation"           : 8,
 
 		// valid for framebuffer
 		"device"     : "/dev/fb0"
@@ -313,6 +297,13 @@
 		]
 	},
 
+	"instCapture" : {
+		"systemEnable" : true,
+		"systemPriority" : 250,
+		"v4lEnable" : false,
+		"v4lPriority" : 240
+	},
+
 	/// Recreate and save led layouts made with web config. These values are just helpers for ui, not for Hyperion.
 	"ledConfig" :
 	{