Merge pull request #618 from hyperion-project/Beta

Merge Beta to Master

Former-commit-id: a31855da06132db8c4c9e16be3cc0a4d12a2194d

CompileHowto.txt

@@ -29,6 +29,8 @@ cmake  -DCMAKE_BUILD_TYPE=Release -Wno-dev ..
 cmake -DENABLE_WS2812BPWM=ON -DENABLE_WS281XPWM=ON -DCMAKE_BUILD_TYPE=Release -Wno-dev ..
 # or if you are not compiling on the raspberry pi (e.g. OrangePi) and need to disable the Dispmanx grabber and support for spi devices
 cmake -DENABLE_DISPMANX=OFF -DENABLE_SPIDEV=OFF -DENABLE_X11=ON -DCMAKE_BUILD_TYPE=Release -Wno-dev ..
+# on amlogic platforms
+cmake -DENABLE_DISPMANX=OFF -DENABLE_SPIDEV=OFF -DENABLE_AMLOGIC=ON -DCMAKE_BUILD_TYPE=Release -Wno-dev ..
 # as an alternative for the dispmanx grabber on non-rpi devices (e.g. cubox-i) you could try the framebuffer grabber
 cmake -DENABLE_DISPMANX=OFF -DENABLE_SPIDEV=OFF -DENABLE_FB=ON  -DCMAKE_BUILD_TYPE=Release -Wno-dev ..
 # for OSX build you need XCode, qt4 libraries and cmake (maybe libusb too). You can use macport or homebrew(recommended) to install them:

ISSUE_TEMPLATE

@@ -1,8 +1,9 @@
-**Please provide some information that we could help as fast as possible.
+BEFORE YOU OPEN A NEW ISSUE!
-Please check the wiki in case your problem is already known/feature requested.**
 
-**1.** Used hardware and sofware (Wetek,RPi1,Rpi2,... Ubuntu 14.04(64bit),OSX,OpenELEC,OSMC,XBian,...)
+Search at our wiki: wiki.hyperion-project.org
-**2.** Your LED device and additional hardware (if used) (WS2801,APA102,WS2812B,...  connected through (direct,arduino uno,...))
+Our FAQ: https://hyperion-project.org/wiki/FAQ-Frequently-Asked-Questions
-**3.** Please upload your Hyperion log to pastebin.com and insert the link. Have a look at the wiki how you get one.
+And have a look at our forum: forum.hyperion-project.org
-**4.** Please upload your "Hyperion Configuration File" to pastebin.com and insert the link.
+If you need help please open a new thread their!
 
+WE PROVIDE NO SUPPORT AT GITHUB!
+All misleading issues will be closed without a announcement!

PULL_REQUEST_TEMPLATE

@@ -3,3 +3,5 @@ IMPORTANT: Please don´t commit to master, we will test your changes first at th
 **2.** If this changes affect the .conf file. Please provide the changed section
 **3.** Reference a issue (optional)
 
+Note: For further discussions use our forum: forum.hyperion-project.org
+

README.md

@@ -1,17 +1,17 @@
 HYPERION
 ========
 
-Hyperion is an opensource 'AmbiLight' implementation controlled using the RaspBerry Pi running [Raspbmc](http://www.raspbmc.com). The main features of Hyperion are:
+Hyperion is an opensource 'AmbiLight' implementation supported by many devices. The main features of Hyperion are:
 * Low CPU load. For a led string of 50 leds the CPU usage will typically be below 1.5% on a non-overclocked Pi.
 * Json interface which allows easy integration into scripts.
 * A command line utility allows easy testing and configuration of the color transforms (Transformation settings are not preserved over a restart at the moment...).
 * Priority channels are not coupled to a specific led data provider which means that a provider can post led data and leave without the need to maintain a connection to Hyperion. This is ideal for a remote application (like our Android app).
 * HyperCon. A tool which helps generate a Hyperion configuration file.
-* XBMC-checker which checks the playing status of XBMC and decides whether or not to capture the screen.
+* Kodi-checker which checks the playing status of Kodi and decides whether or not to capture the screen.
 * Black border detector.
 * A scriptable effect engine.
 * Generic software architecture to support new devices and new algorithms easily.
 
-More information can be found on the [wiki](https://github.com/tvdzwan/hyperion/wiki) or the [Hyperion topic](http://forum.stmlabs.com/showthread.php?tid=11053) on the Raspbmc forum.
+More information can be found on the [wiki](wiki.hyperion-project.org) or the [Hyperion webpage/forum](www.hyperion-project.org).
 
 The source is released under MIT-License (see http://opensource.org/licenses/MIT).

bin/create_all_releases.sh

@@ -1,8 +1,8 @@
 #!/bin/sh
 # create all directly for release with -DCMAKE_BUILD_TYPE=Release -Wno-dev
 # Create the x64 build
-mkdir build-x32x64
+mkdir build-x86x64
-cd build-x32x64
+cd build-x86x64
 cmake -DENABLE_DISPMANX=OFF -DENABLE_X11=ON -DCMAKE_BUILD_TYPE=Release -Wno-dev ..
 make -j 4
 cd ..
@@ -17,14 +17,14 @@ cd ..
 # Create the RPI build
 mkdir build-rpi
 cd build-rpi
-cmake -DCMAKE_TOOLCHAIN_FILE="../Toolchain-rpi.cmake" -DIMPORT_PROTOC=../build-x32x64/protoc_export.cmake -DENABLE_WS2812BPWM=ON -DENABLE_WS281XPWM=ON -DCMAKE_BUILD_TYPE=Release -Wno-dev ..
+cmake -DCMAKE_TOOLCHAIN_FILE="../Toolchain-rpi.cmake" -DIMPORT_PROTOC=../build-x86x64/protoc_export.cmake -DENABLE_WS2812BPWM=ON -DENABLE_WS281XPWM=ON -DCMAKE_BUILD_TYPE=Release -Wno-dev ..
 make -j 4
 cd ..
 
 # Create the WETEK build
 mkdir build-wetek
 cd build-wetek
-cmake -DCMAKE_TOOLCHAIN_FILE="../Toolchain-rpi.cmake" -DIMPORT_PROTOC=../build-x32x64/protoc_export.cmake -DENABLE_DISPMANX=OFF -DENABLE_FB=ON -DENABLE_AMLOGIC=ON -DCMAKE_BUILD_TYPE=Release -Wno-dev ..
+cmake -DCMAKE_TOOLCHAIN_FILE="../Toolchain-rpi.cmake" -DIMPORT_PROTOC=../build-x86x64/protoc_export.cmake -DENABLE_DISPMANX=OFF -DENABLE_FB=ON -DENABLE_AMLOGIC=ON -DCMAKE_BUILD_TYPE=Release -Wno-dev ..
 make -j 4
 cd ..
 
@@ -35,7 +35,7 @@ cd ..
 #make -j 4
 #cd ..
 
-bin/create_release.sh . x32x64
+bin/create_release.sh . x86x64
 #bin/create_release.sh . x32
 bin/create_release.sh . rpi
 bin/create_release.sh . wetek

bin/install_hyperion.sh

@@ -9,16 +9,9 @@ if [ "$1" = "HyperConInstall" ] || [ "$2" = "HyperConInstall" ]; then
 	HCInstall=1
 else HCInstall=0
 fi
-if [ "$1" = "WS281X" ] || [ "$2" = "WS281X" ]; then
+if [ "$1" = "BETA" ] || [ "$2" = "BETA" ]; then
-	PWM=1
+	BETA=1
-else PWM=0
+else BETA=0
-fi
-
-#Check if HyperCon is logged in as root
-if [ $(id -u) != 0 ] && [ $HCInstall -eq 1 ]; then
-		echo '---> Critical Error: Please connect as user "root" through HyperCon' 
-		echo '---> We need admin privileges to install/update your Hyperion! -> abort'
-		exit 1
 fi
 
 #Check, if script is running as root
@@ -27,27 +20,39 @@ if [ $(id -u) != 0 ]; then
 		exit 1
 fi
 
+#Set welcome message
+if [ $BETA -eq 1 ]; then
+	WMESSAGE="echo This script will update Hyperion to the latest BETA"
+else WMESSAGE="echo This script will install/update Hyperion ambilight"
+fi
+
 #Welcome message
 echo '*******************************************************************************' 
-echo 'This script will install/update Hyperion and it´s services' 
+$WMESSAGE 
-echo 'Version 0.1' 
+echo 'Created by brindosch - hyperion-project.org - the official Hyperion source.' 
 echo '*******************************************************************************'
 
-# Find out if we are on OpenElec / OSMC
+# Find out if we are on OpenElec / OSMC / Raspbian
 OS_OPENELEC=`grep -m1 -c OpenELEC /etc/issue`
 OS_OSMC=`grep -m1 -c OSMC /etc/issue`
+OS_RASPBIAN=`grep -m1 -c 'Raspbian\|RetroPie' /etc/issue`
 
-# Find out if its an imx6 device
+# Find out which device this script runs on
 CPU_RPI=`grep -m1 -c 'BCM2708\|BCM2709\|BCM2710' /proc/cpuinfo`
 CPU_IMX6=`grep -m1 -c i.MX6 /proc/cpuinfo`
 CPU_WETEK=`grep -m1 -c Amlogic /proc/cpuinfo`
 CPU_X32X64=`uname -m | grep 'x86_32\|i686\|x86_64' | wc -l`
-#CPU_X32=`uname -m | grep 'x86_32\|i686' | wc -l`
 # Check that we have a known configuration
 if [ $CPU_RPI -ne 1 ] && [ $CPU_IMX6 -ne 1 ] && [ $CPU_WETEK -ne 1 ] && [ $CPU_X32X64 -ne 1 ]; then
 	echo '---> Critical Error: CPU information does not match any known releases -> abort'
 	exit 1
 fi
+
+#Check which RPi we are one (in case)
+RPI_1=`grep -m1 -c BCM2708 /proc/cpuinfo`
+RPI_2=`grep -m1 -c BCM2709 /proc/cpuinfo`
+RPI_3=`grep -m1 -c BCM2710 /proc/cpuinfo`
+
 #Check, if year equals 1970
 DATE=$(date +"%Y")
 if [ "$DATE" -le "2015" ]; then
@@ -63,7 +68,7 @@ USE_SERVICE=`which /usr/sbin/service | wc -l`
 # Make sure that the boblight daemon is no longer running
 BOBLIGHT_PROCNR=$(pidof boblightd | wc -l)
 if [ $BOBLIGHT_PROCNR -eq 1 ]; then
-	echo '---> Critical Error: Found running instance of boblight. Please stop boblight via XBMC menu before installing hyperion -> abort'
+	echo '---> Critical Error: Found running instance of boblight. Please stop boblight via Kodi menu before installing hyperion -> abort'
 	exit 1
 fi
 
@@ -88,7 +93,7 @@ if [ $OS_OPENELEC -ne 1 ]; then
 fi
 
 #Check, if dtparam=spi=on is in place (not for OPENELEC)
-if [ $PWM -ne 1 ] && [ $CPU_RPI -eq 1 ] && [ $OS_OPENELEC -ne 1 ]; then
+if [ $CPU_RPI -eq 1 ] && [ $OS_OPENELEC -ne 1 ]; then
 	SPIOK=`grep '^\dtparam=spi=on' /boot/config.txt | wc -l`
 		if [ $SPIOK -ne 1 ]; then
 			echo '---> Raspberry Pi found, but SPI is not ready, we write "dtparam=spi=on" to /boot/config.txt'
@@ -98,7 +103,7 @@ if [ $PWM -ne 1 ] && [ $CPU_RPI -eq 1 ] && [ $OS_OPENELEC -ne 1 ]; then
 fi
 
 #Check, if dtparam=spi=on is in place (just for OPENELEC)
-if [ $PWM -ne 1 ] && [ $CPU_RPI -eq 1 ] && [ $OS_OPENELEC -eq 1 ]; then
+if [ $CPU_RPI -eq 1 ] && [ $OS_OPENELEC -eq 1 ]; then
 	SPIOK=`grep '^\dtparam=spi=on' /flash/config.txt | wc -l`
 		if [ $SPIOK -ne 1 ]; then
 			mount -o remount,rw /flash
@@ -109,27 +114,6 @@ if [ $PWM -ne 1 ] && [ $CPU_RPI -eq 1 ] && [ $OS_OPENELEC -eq 1 ]; then
 	fi
 fi
 
-#Check, if dtoverlay=pwm is in place (not for OPENELEC)
-#if [ $PWM -eq 1 ] && [ $CPU_RPI -eq 1 ] && [ $OS_OPENELEC -ne 1 ]; then
-#	PWMOK=`grep '^\dtoverlay=pwm' /boot/config.txt | wc -l`
-#		if [ $PWMOK -ne 1 ]; then
-#			echo '---> Raspberry Pi found, but PWM is not ready, we write "dtoverlay=pwm" to /boot/config.txt'
-#			sed -i '$a dtoverlay=pwm' /boot/config.txt
-#			PWMREBOOTMESSAGE="echo Please reboot your Raspberry Pi, we inserted dtoverlay=pwm to /boot/config.txt"
-#	fi
-#fi
-
-#Check, if dtoverlay=pwm is in place (just for OPENELEC)
-if [ $PWM -eq 1 ] && [ $CPU_RPI -eq 1 ] && [ $OS_OPENELEC -eq 1 ]; then
-	PWMOK=`grep '^\dtoverlay=pwm' /flash/config.txt | wc -l`
-		if [ $PWMOK -ne 1 ]; then
-			mount -o remount,rw /flash
-			echo '---> Raspberry Pi with OpenELEC found, but PWM is not ready, we write "dtoverlay=pwm" to /flash/config.txt'
-			sed -i '$a dtoverlay=pwm' /flash/config.txt
-			mount -o remount,ro /flash
-			PWMREBOOTMESSAGE="echo Please reboot your OpenELEC, we inserted dtoverlay=pwm to /flash/config.txt"
-	fi
-fi
 #Backup the .conf files, if present
 echo '---> Backup Hyperion configuration(s), if present'
 rm -f /tmp/*.json 2>/dev/null
@@ -138,11 +122,33 @@ if [ $OS_OPENELEC -eq 1 ]; then
 else cp -v /opt/hyperion/config/*.json /tmp 2>/dev/null
 fi
  
+# Select the appropriate download path
+if [ $BETA -eq 1 ]; then
+	HYPERION_ADDRESS=https://sourceforge.net/projects/hyperion-project/files/beta
+else HYPERION_ADDRESS=https://sourceforge.net/projects/hyperion-project/files/release
+fi
 # Select the appropriate release
-HYPERION_ADDRESS=https://raw.githubusercontent.com/tvdzwan/hyperion/master/deploy
+if [ $CPU_RPI -eq 1 ] && [ $OS_OPENELEC -eq 1 ] && [ $RPI_1 -eq 1 ]; then
-if [ $CPU_RPI -eq 1 ]; then
+	HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_rpi_oe.tar.gz
-	HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_rpi.tar.gz
 	OE_DEPENDECIES=$HYPERION_ADDRESS/hyperion.deps.openelec-rpi.tar.gz
+elif [ $CPU_RPI -eq 1 ] && [ $OS_OPENELEC -eq 1 ] && [ $RPI_2 -eq 1 ]; then
+	HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_rpi2_oe.tar.gz
+	OE_DEPENDECIES=$HYPERION_ADDRESS/hyperion.deps.openelec-rpi.tar.gz
+elif [ $CPU_RPI -eq 1 ] && [ $OS_OPENELEC -eq 1 ] && [ $RPI_3 -eq 1 ]; then
+	HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_rpi3_oe.tar.gz
+	OE_DEPENDECIES=$HYPERION_ADDRESS/hyperion.deps.openelec-rpi.tar.gz
+elif [ $CPU_RPI -eq 1 ] && [ $OS_OSMC -eq 1 ] && [ $RPI_1 -eq 1 ]; then
+	HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_rpi_osmc.tar.gz
+elif [ $CPU_RPI -eq 1 ] && [ $OS_OSMC -eq 1 ] && [ $RPI_2 -eq 1 ]; then
+	HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_rpi2_osmc.tar.gz
+elif [ $CPU_RPI -eq 1 ] && [ $OS_OSMC -eq 1 ] && [ $RPI_3 -eq 1 ]; then
+	HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_rpi3_osmc.tar.gz
+elif [ $CPU_RPI -eq 1 ] && [ $RPI_1 -eq 1 ]; then
+	HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_rpi.tar.gz
+elif [ $CPU_RPI -eq 1 ] && [ $RPI_2 -eq 1 ]; then
+	HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_rpi2.tar.gz
+elif [ $CPU_RPI -eq 1 ] && [ $RPI_3 -eq 1 ]; then
+	HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_rpi3.tar.gz
 elif [ $CPU_IMX6 -eq 1 ]; then
 	HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_imx6.tar.gz
 	OE_DEPENDECIES=$HYPERION_ADDRESS/hyperion.deps.openelec-imx6.tar.gz
@@ -150,11 +156,8 @@ elif [ $CPU_WETEK -eq 1 ]; then
 	HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_wetek.tar.gz
 	OE_DEPENDECIES=$HYPERION_ADDRESS/hyperion.deps.openelec-rpi.tar.gz
 elif [ $CPU_X32X64 -eq 1 ]; then
-	HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_x32x64.tar.gz
+	HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_x86x64.tar.gz
-	OE_DEPENDECIES=$HYPERION_ADDRESS/hyperion.deps.openelec-x32x64.tar.gz
+	OE_DEPENDECIES=$HYPERION_ADDRESS/hyperion.deps.openelec-x86x64.tar.gz
-#elif [ $CPU_X32 -eq 1 ]; then
-#	HYPERION_RELEASE=$HYPERION_ADDRESS/hyperion_x32.tar.gz
-#	OE_DEPENDECIES=$HYPERION_ADDRESS/hyperion.deps.openelec-x32x64.tar.gz
 else
 	echo "---> Critical Error: Target platform unknown -> abort"
 	exit 1
@@ -185,9 +188,6 @@ else
 	ln -fs /opt/hyperion/bin/hyperion-v4l2 /usr/bin/hyperion-v4l2
 	ln -fs /opt/hyperion/bin/hyperion-dispmanx /usr/bin/hyperion-dispmanx 2>/dev/null
 	ln -fs /opt/hyperion/bin/hyperion-x11 /usr/bin/hyperion-x11 2>/dev/null
-
-# Copy a link to the hyperion configuration file to /etc (-s for people who replaced the symlink with their config)
-	ln -s /opt/hyperion/config/hyperion.config.json /etc/hyperion.config.json 2>/dev/null
 fi
 	
 # Restore backup of .conf files, if present
@@ -203,16 +203,18 @@ if [ $USE_INITCTL -eq 1 ]; then
 	cp -n /opt/hyperion/init.d/hyperion.initctl.sh /etc/init/hyperion.conf 2>/dev/null
 	initctl reload-configuration
 elif [ $OS_OPENELEC -eq 1 ]; then
+	#modify all old installs with a logfile output
+	sed -i 's|/dev/null|/storage/logfiles/hyperion.log|g' /storage/.config/autostart.sh
 	# only add to start script if hyperion is not present yet
 	if [ `cat /storage/.config/autostart.sh 2>/dev/null | grep hyperiond | wc -l` -eq 0 ]; then
 		echo '---> Adding Hyperion to OpenELEC autostart.sh'
-		echo "/storage/hyperion/bin/hyperiond.sh /storage/.config/hyperion.config.json > /dev/null 2>&1 &" >> /storage/.config/autostart.sh
+		echo "/storage/hyperion/bin/hyperiond.sh /storage/.config/hyperion.config.json > /storage/logfiles/hyperion.log 2>&1 &" >> /storage/.config/autostart.sh
 		chmod +x /storage/.config/autostart.sh
 	fi
 	# only add hyperion-x11 to startup, if not found and x32x64 detected
 	if [ $CPU_X32X64 -eq 1 ] && [ `cat /storage/.config/autostart.sh 2>/dev/null | grep hyperion-x11 | wc -l` -eq 0 ]; then
 		echo '---> Adding Hyperion-x11 to OpenELEC autostart.sh'
-		echo "DISPLAY=:0.0 LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/storage/hyperion/bin /storage/hyperion/bin/hyperion-x11 </dev/null >/dev/null 2>&1 &" >> /storage/.config/autostart.sh		
+		echo "DISPLAY=:0.0 LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/storage/hyperion/bin /storage/hyperion/bin/hyperion-x11 </dev/null >/storage/logfiles/hyperion.log 2>&1 &" >> /storage/.config/autostart.sh		
 	fi
 elif [ $USE_SYSTEMD -eq 1 ]; then
 	echo '---> Installing systemd script'
@@ -223,22 +225,14 @@ elif [ $USE_SYSTEMD -eq 1 ]; then
 	rm /etc/init.d/hyperion 2>/dev/null
 	cp -n /opt/hyperion/init.d/hyperion.systemd.sh /etc/systemd/system/hyperion.service
 	systemctl -q enable hyperion.service
-		if [ $PWM -eq 1 ] && [ $OS_OSMC -eq 1 ]; then
+		if [ $OS_OSMC -eq 1 ]; then
-			echo '---> Modify systemd script for OSMC usage (PWM Support)'
+			echo '---> Modify systemd script for OSMC usage'
-			# Wait until kodi is sarted (for xbmc checker) and FIX user in case it is wrong (need root for access to pwm!)!
+			# Wait until kodi is sarted (for kodi checker)
 			sed -i '/After = mediacenter.service/d' /etc/systemd/system/hyperion.service
 			sed -i '/Unit/a After = mediacenter.service' /etc/systemd/system/hyperion.service
 			sed -i 's/User=osmc/User=root/g' /etc/systemd/system/hyperion.service
 			sed -i 's/Group=osmc/Group=root/g' /etc/systemd/system/hyperion.service
 			systemctl -q daemon-reload
-		elif [ $OS_OSMC -eq 1 ]; then
-			echo '---> Modify systemd script for OSMC usage'
-			# Wait until kodi is sarted (for xbmc checker) and replace user (for remote control through osmc)
-			sed -i '/After = mediacenter.service/d' /etc/systemd/system/hyperion.service
-			sed -i '/Unit/a After = mediacenter.service' /etc/systemd/system/hyperion.service
-			sed -i 's/User=root/User=osmc/g' /etc/systemd/system/hyperion.service
-			sed -i 's/Group=root/Group=osmc/g' /etc/systemd/system/hyperion.service
-			systemctl -q daemon-reload
 		fi
 elif [ $USE_SERVICE -eq 1 ]; then
 	echo '---> Installing startup script in init.d'
@@ -248,10 +242,17 @@ elif [ $USE_SERVICE -eq 1 ]; then
 	update-rc.d hyperion defaults 98 02
 fi
 
+#chown the /config/ dir and all configs inside for hypercon config upload for non-root logins
+if [ $OS_OSMC -eq 1 ]; then
+	chown -R osmc:osmc /opt/hyperion/config
+elif [ $OS_RASPBIAN -eq 1 ]; then
+	chown -R pi:pi /opt/hyperion/config
+fi
+
 # Start the hyperion daemon
 echo '---> Starting Hyperion'
 if [ $OS_OPENELEC -eq 1 ]; then
-	/storage/.config/autostart.sh
+	/storage/.config/autostart.sh > /dev/null 2>&1 &
 elif [ $USE_INITCTL -eq 1 ]; then
 	/sbin/initctl start hyperion
 elif [ $USE_SERVICE -eq 1 ]; then
@@ -260,27 +261,21 @@ elif [ $USE_SYSTEMD -eq 1 ]; then
 	service hyperion start
 fi
 
-#Hint for the user with path to config
-if [ $OS_OPENELEC -eq 1 ];then
-	HINTMESSAGE="echo Path to your configuration -> /storage/.config/hyperion.config.json"
-else HINTMESSAGE="echo Path to your configuration -> /etc/hyperion.config.json"
-fi
 echo '*******************************************************************************' 
 echo 'Hyperion Installation/Update finished!' 
-echo 'Please get a new HyperCon version to benefit from the latest features!' 
+echo 'Please download the latest HyperCon version to benefit from new features!' 
-echo 'Create a new config file, if you encounter problems!' 
+echo 'To create a config, follow the HyperCon Guide at our Wiki (EN/DE)!' 
-$HINTMESSAGE
+echo 'Wiki: wiki.hyperion-project.org Webpage: www.hyperion-project.org' 
 $REBOOTMESSAGE
-$PWMREBOOTMESSAGE
 echo '*******************************************************************************' 
 ## Force reboot and prevent prompt if spi is added during a HyperCon Install
-if ( [ "$HCInstall" = "1" ] && [ "$CPU_RPI" = "1" ] ) && ( [ "$SPIOK" = "0" ] || [ "$PWMOK" = "0" ] ); then
+if [ $HCInstall -eq 1 ] && [ $CPU_RPI -eq 1 ] && [ $SPIOK -ne 1 ]; then
-	echo "Rebooting now, we added dtparam=spi=on and/or dtoverlay=pwm to config.txt"
+	echo "Rebooting now, we added dtparam=spi=on to config.txt"
 	reboot
 	exit 0
 fi
 #Prompt for reboot, if spi added to config.txt
-if ( [ "$CPU_RPI" = "1" ] ) && ( [ "$SPIOK" = "0" ] || [ "$PWMOK" = "0" ] ); then
+if [ $CPU_RPI -eq 1 ] && [ $SPIOK -ne 1 ]; then
         while true
         do
         echo -n "---> Do you want to reboot your Raspberry Pi now? (y or n) :"

bin/remove_hyperion.sh

@@ -21,6 +21,7 @@ fi
 echo '*******************************************************************************' 
 echo 'This script will remove Hyperion and it´s services' 
 echo '-----> Please BACKUP your hyperion.config.json if necessary <-----'
+echo 'Created by brindosch - hyperion-project.org - the official Hyperion source.' 
 echo '*******************************************************************************'
 
 #Skip the prompt if HyperCon Remove
@@ -49,6 +50,9 @@ USE_SYSTEMD=`grep -m1 -c systemd /proc/1/comm`
 USE_INITCTL=`which /sbin/initctl | wc -l`
 USE_SERVICE=`which /usr/sbin/service | wc -l`
 
+# set count for forwarder
+SERVICEC=1
+
 # Stop hyperion daemon if it is running
 echo '---> Stop Hyperion, if necessary'
 if [ $OS_OPENELEC -eq 1 ]; then
@@ -59,12 +63,19 @@ elif [ $USE_SERVICE -eq 1 ]; then
 	/usr/sbin/service hyperion stop 2>/dev/null
 elif [ $USE_SYSTEMD -eq 1 ]; then
 	service hyperion stop 2>/dev/null
+		while [ $SERVICEC -le 20 ]; do
+		service hyperion_fw$SERVICEC stop 2>/dev/null
+		((SERVICEC++))
+		done
 fi
 
+#reset count
+SERVICEC=`which /usr/sbin/service | wc -l`
+
 #Disabling and delete service files
 if [ $USE_INITCTL -eq 1 ]; then
 	echo '---> Delete and disable Hyperion initctl script'
-	rm -v /etc/init/hyperion.conf 2>/dev/null
+	rm -v /etc/init/hyperion* 2>/dev/null
 	initctl reload-configuration
 elif [ $OS_OPENELEC -eq 1 ]; then
 	# Remove Hyperion from OpenELEC autostart.sh
@@ -75,12 +86,20 @@ elif [ $USE_SYSTEMD -eq 1 ]; then
 	# Delete and disable Hyperion systemd script
 	echo '---> Delete and disable Hyperion systemd script'
 	systemctl disable hyperion.service
-	rm -v /etc/systemd/system/hyperion.service 2>/dev/null
+		while [ $SERVICEC -le 20 ]; do
+		systemctl -q disable hyperion_fw$SERVICEC.service 2>/dev/null
+		((SERVICEC++))
+		done
+	rm -v /etc/systemd/system/hyperion* 2>/dev/null
 elif [ $USE_SERVICE -eq 1 ]; then
 	# Delete and disable Hyperion init.d script
 	echo '---> Delete and disable Hyperion init.d script'
 	update-rc.d -f hyperion remove
-	rm /etc/init.d/hyperion 2>/dev/null
+		while [ $SERVICEC -le 20 ]; do
+		update-rc.d -f hyperion_fw$SERVICEC remove 2>/dev/null
+		((SERVICEC++))
+		done
+	rm /etc/init.d/hyperion* 2>/dev/null
 fi
 
 # Delete Hyperion binaries

bin/service/hyperion.init.sh

@@ -13,7 +13,7 @@
 ### END INIT INFO
 
 DAEMON=hyperiond
-DAEMONOPTS="/etc/hyperion.config.json"
+DAEMONOPTS="/opt/hyperion/config/hyperion.config.json"
 DAEMON_PATH="/usr/bin"
 
 NAME=$DAEMON
@@ -22,7 +22,7 @@ PIDFILE=/var/run/$NAME.pid
 SCRIPTNAME=/etc/init.d/$NAME
 case "$1" in
 start)
-        if [ $(pgrep -l $NAME |wc -l) = 1 ]
+        if [ $(pgrep -xl $NAME |wc -l) = 1 ]
         then
                 printf  "%-50s\n" "Already running..."
                 exit 1
@@ -59,7 +59,7 @@ stop)
                     PID=`cat $PIDFILE`
                     cd $DAEMON_PATH
                 if [ -f $PIDFILE ]; then
-                    kill -HUP $PID
+                    kill $PID
                     printf "%s\n" "Ok"
                     rm -f $PIDFILE
                 else

bin/service/hyperion.initctl.sh

@@ -8,4 +8,4 @@ stop on (runlevel [!2345])
 
 respawn
 
-exec /usr/bin/hyperiond /etc/hyperion.config.json
+exec /usr/bin/hyperiond /opt/hyperion/config/hyperion.config.json

bin/service/hyperion.systemd.sh

@@ -6,7 +6,7 @@ Type=simple
 User=root
 Group=root
 UMask=007
-ExecStart=/opt/hyperion/bin/hyperiond /etc/hyperion.config.json
+ExecStart=/opt/hyperion/bin/hyperiond /opt/hyperion/config/hyperion.config.json
 ExecReload=/bin/kill -HUP $MAINPID
 Restart=on-failure
 TimeoutStopSec=10

config/hyperion.config.json

@@ -1,16 +1,17 @@
 // Automatically generated configuration file for 'Hyperion daemon'
-// Generated by: HyperCon (The Hyperion deamon configuration file builder
+// Generated by: HyperCon (The Hyperion deamon configuration file builder)
+// Created with HyperCon V1.02.0 (30.04.2016)
 
 {
 	/// Device configuration contains the following fields: 
 	/// * 'name'       : The user friendly name of the device (only used for display purposes)
 	/// * 'type'       : The type of the device or leds (known types for now are
-	/// APA102, Adalight, AmbiLed, Atmo, Hyperion-USBASP-WS2801, Hyperion-USBASP-WS2812, Lightberry, Lightpack, LPD6803, LPD8806, Multi-Lightpack, P9813, Paintpack, PhilipsHUE, PiBlaster, SEDU, file, ThinkerForge, TPM2, WS2801, WS2812b, None)
+	/// ---------SPI---------, APA102, WS2801, P9813, LPD6803, LPD8806, ---------PWM---------, WS2812b (just RPi1), WS281X (RPi1, RPi2, RPi3), --------OTHER--------, PhilipsHUE, AtmoOrb, PiBlaster, Tinkerforge, FadeCandy, RawHID (USB), UDP, SEDU, TPM2, USBASP-WS2801, USBASP-WS2812, ------3rd PARTY------, Adalight, AdalightAPA102, AmbiLed, Atmo, Lightpack, Multi-Lightpack, Paintpack, Test (file), None)
 	/// * [device type specific configuration]
 	/// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.).
 	"device" :
 	{
-		"name"       : "MyPi",
+		"name"       : "MyHyperionConfig",
 		"type"       : "ws2801",
 		"output"     : "/dev/spidev0.0",
 		"rate"     : 1000000,
@@ -20,18 +21,31 @@
 	/// Color manipulation configuration used to tune the output colors to specific surroundings. 
 	/// The configuration contains a list of color-transforms. Each transform contains the 
 	/// following fields:
-	///  * 'id'   : The unique identifier of the color transformation (eg 'device_1')	///  * 'leds' : The indices (or index ranges) of the leds to which this color transform applies
+	///  * 'channelAdjustment'
-	///             (eg '0-5, 9, 11, 12-17'). The indices are zero based.	///  * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following 
+	///  * 'id'   : The unique identifier of the channel adjustments (eg 'device_1')
+	///  * 'leds'   : The indices (or index ranges) of the leds to which this channel adjustment applies
+	///             (eg '0-5, 9, 11, 12-17'). The indices are zero based.
+	///  * 'pureRed'/'pureGreen'/'pureBlue' : The manipulation in the Red-Green-Blue color domain with the 
+	///                           following tuning parameters for each channel:
+	///  * 'temperature'
+	///  * 'id'   : The unique identifier of the temperature (eg 'device_1')
+	///  * 'leds'   : The indices (or index ranges) of the leds to which this temperature applies
+	///             (eg '0-5, 9, 11, 12-17'). The indices are zero based.
+	///  * 'red'/'green'/'blue' : The temperature manipulation in the Red-Green-Blue color domain with the 
+	///                           following tuning parameters for each channel:
+	///  * 'transform'
+	///  * 'id'   : The unique identifier of the color transformation (eg 'device_1')
+	///  * 'leds' : The indices (or index ranges) of the leds to which this color transform applies
+	///             (eg '0-5, 9, 11, 12-17'). The indices are zero based.
+	///  * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following 
 	///            tuning parameters:
 	///            - 'saturationGain'  The gain adjustement of the saturation
-	///            - 'valueGain'       The gain adjustement of the value
+	///            - 'luminanceGain'       The gain adjustement of the luminance
 	///  * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue color domain with the 
 	///                           following tuning parameters for each channel:
 	///            - 'threshold'       The minimum required input value for the channel to be on 
 	///                                (else zero)
 	///            - 'gamma'           The gamma-curve correction factor
-	///            - 'blacklevel'      The lowest possible value (when the channel is black)
-	///            - 'whitelevel'      The highest possible value (when the channel is white)
 	///
 	/// Next to the list with color transforms there is also a smoothing option.
 	///  * 'smoothing' : Smoothing of the colors in the time-domain with the following tuning 
@@ -42,16 +56,28 @@
 	///            - 'updateDelay'     The delay of the output to leds (in periods of smoothing)
 	"color" :
 	{
-		"correction" :
+		"channelAdjustment" :
 		[
 			{
 				"id"   : "default",
 				"leds" : "*",
-				"correctionValues" :
+				"pureRed" :
 				{
-					"red"   : 255,
+					"redChannel"		: 255,
-					"green" : 255,
+					"greenChannel"		: 0,
-					"blue"  : 255
+					"blueChannel"		: 0
+				},
+				"pureGreen" :
+				{
+					"redChannel"		: 0,
+					"greenChannel"		: 255,
+					"blueChannel"		: 0
+				},
+				"pureBlue" :
+				{
+					"redChannel"		: 0,
+					"greenChannel"		: 0,
+					"blueChannel"		: 255
 				}
 			}
 		],
@@ -73,11 +99,6 @@
 			{
 				"id"   : "default",
 				"leds" : "*",
-				"hsv" :
-				{
-					"saturationGain" : 1.0000,
-					"valueGain"      : 1.0000
-				},
 				"hsl" :
 				{
 					"saturationGain"	: 1.0000,
@@ -86,26 +107,21 @@
 				"red" :
 				{
 					"threshold" 	: 0.0000,
-					"gamma"      : 1.0000,
+					"gamma"     	: 2.5000
-					"blacklevel" : 0.0000,
-					"whitelevel" : 1.0000
 				},
 				"green" :
 				{
 					"threshold" 	: 0.0000,
-					"gamma"      : 1.0000,
+					"gamma"     	: 2.5000
-					"blacklevel" : 0.0000,
-					"whitelevel" : 1.0000
 				},
 				"blue" :
 				{
 					"threshold" 	: 0.0000,
-					"gamma"      : 1.0000,
+					"gamma"     	: 2.5000
-					"blacklevel" : 0.0000,
-					"whitelevel" : 1.0000
 				}
 			}
 		],
+
 		"smoothing" :
 		{
 			"type"            : "linear",
@@ -139,7 +155,7 @@
 	///  * color 		: Set static color after boot -> set effect to "" (empty) and input the values [R,G,B] and set duration_ms NOT to 0 (use 1) instead 
 	///  * effect 		: The effect selected as 'boot sequence' 
 	///  * duration_ms	: The duration of the selected effect (0=endless) 
-	///  * priority 	: The priority of the selected effect/static color (default=0) 
+	///  * priority 	: The priority of the selected effect/static color (default=990) HINT: lower value result in HIGHER priority! 
 	"effects" : 
 	{
 		"paths" : 
@@ -172,13 +188,14 @@
 	///   * width        : The width of the grabbed frames [pixels]
 	///   * height       : The height of the grabbed frames [pixels]
 	///   * frequency_Hz : The frequency of the frame grab [Hz]
-	///   * priority     : The priority
+	///   * priority     : The priority of the frame-gabber (Default=890) HINT: lower value result in HIGHER priority! 
+	///   * ATTENTION    : Power-of-Two resolution is not supported and leads to unexpected behaviour! 
 	"framegrabber" : 
 	{
-		"width"        : 80,
+		"width" : 64,
-		"height"       : 45,
+		"height" : 64,
 		"frequency_Hz" : 10.0,
-		"priority"     : 900
+		"priority" : 890
 	},
 
 	/// The configuration of the Kodi connection used to enable and disable the frame-grabber. Contains the following fields: 
@@ -218,6 +235,7 @@
 
 	/// The configuration of the boblight server which enables the boblight remote interface
 	///  * port 	: Port at which the boblight server is started
+	///  * priority: Priority of the boblight server (Default=900) HINT: lower value result in HIGHER priority! 
 // 	"boblightServer" : 
 // 	{
 // 		"port" : 19333,
@@ -232,7 +250,7 @@
 	///  * height               : V4L2 height to set [default=-1]
 	///  * frameDecimation      : Frame decimation factor [default=2]
 	///  * sizeDecimation       : Size decimation factor [default=8]
-	///  * priority             : Hyperion priority channel [default=800]
+	///  * priority             : Hyperion priority channel [default=900]
 	///  * mode                 : 3D mode to use 2D/3DSBS/3DTAB (note: no autodetection) [default="2D"]
 	///  * cropLeft             : Cropping from the left [default=0]
 	///  * cropRight            : Cropping from the right [default=0]
@@ -250,7 +268,7 @@
 // 		"height" : -1,
 // 		"frameDecimation" : 2,
 // 		"sizeDecimation" : 8,
-// 		"priority" : 800,
+// 		"priority" : 900,
 // 		"mode" : "2D",
 // 		"cropLeft" : 0,
 // 		"cropRight" : 0,

config/hyperion_x86.config.json

@@ -5,7 +5,7 @@
 	/// Device configuration contains the following fields: 
 	/// * 'name'       : The user friendly name of the device (only used for display purposes)
 	/// * 'type'       : The type of the device or leds (known types for now are 'ws2801', 'ldp8806',
-	///                  'lpd6803', 'sedu', 'adalight', 'lightpack', 'file' and 'none')
+	///                  'lpd6803', 'sedu', 'adalight', 'lightpack', 'test' and 'none')
 	/// * 'output'     : The output specification depends on selected device. This can for example be the
 	///                  device specifier, device serial number, or the output file name
 	/// * 'rate'       : The baudrate of the output to the device
@@ -19,21 +19,6 @@
 		"colorOrder" : "rgb"
 	},
 
-	/// Configuration for message forwarding to other hyperions
-	/// protobuffer and json remote interface are forwarded to configured hosts
-	/// 'proto' is mostly used for video streams and 'json' for effects
-	///
-	/// ** pay attention which port you use. use correct ports for protols  **
-	/// 
-	/// * 'proto' : list of host in form of <ip>:<port>
-	/// * 'json'  : list of host in form of <ip>:<port>
-///	"forwarder" :
-///	{
-///		"proto" : [ "127.0.0.1:19445","192.168.178.88:19445" ],
-///		"json"  : [ "127.0.0.1:19444","192.168.178.88:19444" ]
-///	},
-
-
 	/// Color manipulation configuration used to tune the output colors to specific surroundings. 
 	/// The configuration contains a list of color-transforms. Each transform contains the 
 	/// following fields:
@@ -374,10 +359,6 @@
 	/// The configuration of the effect engine, contains the following items: 
 	///  * paths        : An array with absolute location(s) of directories with effects 
 	///  * bootsequence : The effect selected as 'boot sequence'
-	///    * effect : name of the effect you want to start. Set to empty if no effect wanted
-	///    * color  : switch to static color after effect is done
-	///    * duration_ms : duration of boot effect in ms. 0 means effect stays forever
-	///    * priority : priority of boot effect and static color
 	"effects" : 
 	{
 		"paths" : 
@@ -388,23 +369,20 @@
 
 	"bootsequence" : 
 	{
-		"color"       : [0,0,0],
 		"effect" : "Rainbow swirl fast",
-		"duration_ms" : 3000,
+		"duration_ms" : 3000
-		"priority"    : 990
 	},
 
 	///  The configuration for the frame-grabber, contains the following items: 
 	///   * width        : The width of the grabbed frames [pixels]
 	///   * height       : The height of the grabbed frames [pixels]
 	///   * frequency_Hz : The frequency of the frame grab [Hz]
-///	"framegrabber" : 
+// 	"framegrabber" : 
-///	{
+// 	{
-///		"width"        : 64,
+// 		"width" : 64,
-///		"height"       : 64,
+// 		"height" : 64,
-///		"frequency_Hz" : 10.0,
+// 		"frequency_Hz" : 10.0
-///		"priority"     : 900
+// 	},
-///	},
 
 	/// The configuration of the XBMC connection used to enable and disable the frame-grabber. Contains the following fields: 
 	///  * xbmcAddress       : The IP address of the XBMC-host
@@ -445,8 +423,7 @@
 	///  * port : Port at which the boblight server is started
 // 	"boblightServer" : 
 // 	{
-// 		"port" : 19333,
+// 		"port" : 19333
-//		"priority" : 900
 // 	},
 
 	"endOfJson" : "endOfJson"

deploy/hummingboard_prerelease.tar.gz.REMOVED.git-id

@@ -1 +0,0 @@
-63b2cc4bf190a0c0c996be6db30fcf03109c9625

deploy/hyperion.deps.openelec-imx6.tar.gz.REMOVED.git-id

@@ -1 +0,0 @@
-198ac3d44bac13ba993069454397ad8c201d37b9

deploy/hyperion.deps.openelec-rpi.tar.gz.REMOVED.git-id

@@ -1 +0,0 @@
-a628a0f8dea4332995fe4f32860a114a9b48ea4b

deploy/hyperion.deps.openelec-x32x64.tar.gz.REMOVED.git-id

@@ -1 +0,0 @@
-dcef2212c5d493fed074dc5b1e222ad9cb6098e8

deploy/hyperion_imx6.tar.gz.REMOVED.git-id

@@ -1 +0,0 @@
-53710fe42ce52c16b82464e0e01ca6ee6df6912c

deploy/hyperion_rpi.tar.gz.REMOVED.git-id

@@ -1 +0,0 @@
-89463afae2a82b597e5728ccac952669cc5efad3

deploy/hyperion_wetek.tar.gz.REMOVED.git-id

@@ -1 +0,0 @@
-2a0699eb2d8b7b44ceee890fa106714fca2b15d0

deploy/hyperion_x32x64.tar.gz.REMOVED.git-id

@@ -1 +0,0 @@
-b0ef7e5348fb3710b3e5083a3249fac33b8119a8

include/effectengine/ActiveEffectDefinition.h

@@ -0,0 +1,15 @@
+#pragma once
+
+// stl include
+#include <string>
+
+// json include
+#include <json/value.h>
+
+struct ActiveEffectDefinition
+{
+	std::string script;
+	int priority;
+	int timeout;
+	Json::Value args;
+};

include/effectengine/EffectEngine.h

@@ -11,6 +11,7 @@
 
 // Effect engine includes
 #include <effectengine/EffectDefinition.h>
+#include <effectengine/ActiveEffectDefinition.h>
 
 // pre-declarioation
 class Effect;
@@ -26,6 +27,8 @@ public:
 
 	const std::list<EffectDefinition> & getEffects() const;
 	
+	const std::list<ActiveEffectDefinition> & getActiveEffects();
+
 	static bool loadEffectDefinition(const std::string & path, const std::string & effectConfigFile, EffectDefinition &effectDefinition);
 
 public slots:
@@ -55,5 +58,7 @@ private:
 
 	std::list<Effect *> _activeEffects;
 	
+	std::list<ActiveEffectDefinition> _availableActiveEffects;
+
     PyThreadState * _mainThreadState;
 };

include/hyperion/ColorAdjustment.h

@@ -0,0 +1,22 @@
+#pragma once
+
+// STL includes
+#include <string>
+
+// Utils includes
+#include <utils/RgbChannelAdjustment.h>
+
+class ColorAdjustment
+{
+public:
+
+	/// Unique identifier for this color transform
+	std::string _id;
+
+	/// The RED-Channel (RGB) adjustment
+	RgbChannelAdjustment _rgbRedAdjustment;
+	/// The GREEN-Channel (RGB) transform
+	RgbChannelAdjustment _rgbGreenAdjustment;
+	/// The BLUE-Channel (RGB) transform
+	RgbChannelAdjustment _rgbBlueAdjustment;
+};

include/hyperion/Hyperion.h

@@ -15,10 +15,12 @@
 #include <hyperion/PriorityMuxer.h>
 #include <hyperion/ColorTransform.h>
 #include <hyperion/ColorCorrection.h>
+#include <hyperion/ColorAdjustment.h>
 #include <hyperion/MessageForwarder.h>
 
 // Effect engine includes
 #include <effectengine/EffectDefinition.h>
+#include <effectengine/ActiveEffectDefinition.h>
 
 // Forward class declaration
 class LedDevice;
@@ -28,10 +30,11 @@ class HsvTransform;
 class HslTransform;
 class RgbChannelTransform;
 class RgbChannelCorrection;
+class RgbChannelAdjustment;
 class MultiColorTransform;
 class MultiColorCorrection;
 class MultiColorTemperature;
-
+class MultiColorAdjustment;
 ///
 /// The main class of Hyperion. This gives other 'users' access to the attached LedDevice through
 /// the priority muxer.
@@ -98,6 +101,10 @@ public:
 	/// @return The list of available effects
 	const std::list<EffectDefinition> &getEffects() const;
 	
+	/// Get the list of active effects
+	/// @return The list of active effects
+	const std::list<ActiveEffectDefinition> &getActiveEffects();
+
 public slots:
 	///
 	/// Writes a single color to all the leds for the given time and priority
@@ -135,6 +142,12 @@ public slots:
 	///
 	const std::vector<std::string> & getTemperatureIds() const;
 	
+	///
+	/// Returns the list with unique adjustment identifiers
+	/// @return The list with adjustment identifiers
+	///
+	const std::vector<std::string> & getAdjustmentIds() const;
+	
 	///
 	/// Returns the ColorTransform with the given identifier
 	/// @return The transform with the given identifier (or nullptr if the identifier does not exist)
@@ -153,6 +166,12 @@ public slots:
 	///
 	ColorCorrection * getTemperature(const std::string& id);
 	
+	///
+	/// Returns the ColorAdjustment with the given identifier
+	/// @return The adjustment with the given identifier (or nullptr if the identifier does not exist)
+	///
+	ColorAdjustment * getAdjustment(const std::string& id);
+	
 	///
 	/// Returns  MessageForwarder Object
 	/// @return instance of message forwarder object
@@ -168,6 +187,9 @@ public slots:
 	/// Tell Hyperion that the corrections have changed and the leds need to be updated
 	void temperaturesUpdated();
 
+	/// Tell Hyperion that the corrections have changed and the leds need to be updated
+	void adjustmentsUpdated();
+
 	///
 	/// Clears the given priority channel. This will switch the led-colors to the colors of the next
 	/// lower priority channel (or off if no more channels are set)
@@ -208,12 +230,15 @@ public:
 	static MultiColorTransform * createLedColorsTransform(const unsigned ledCnt, const Json::Value & colorTransformConfig);
 	static MultiColorCorrection * createLedColorsCorrection(const unsigned ledCnt, const Json::Value & colorCorrectionConfig);
 	static MultiColorCorrection * createLedColorsTemperature(const unsigned ledCnt, const Json::Value & colorTemperatureConfig);
+	static MultiColorAdjustment * createLedColorsAdjustment(const unsigned ledCnt, const Json::Value & colorAdjustmentConfig);
 	static ColorTransform * createColorTransform(const Json::Value & transformConfig);
 	static ColorCorrection * createColorCorrection(const Json::Value & correctionConfig);
+	static ColorAdjustment * createColorAdjustment(const Json::Value & adjustmentConfig);
 	static HsvTransform * createHsvTransform(const Json::Value & hsvConfig);
 	static HslTransform * createHslTransform(const Json::Value & hslConfig);
 	static RgbChannelTransform * createRgbChannelTransform(const Json::Value& colorConfig);
 	static RgbChannelCorrection * createRgbChannelCorrection(const Json::Value& colorConfig);
+	static RgbChannelAdjustment * createRgbChannelAdjustment(const Json::Value& colorConfig, const RgbChannel color);
 
 	static LedDevice * createColorSmoothing(const Json::Value & smoothingConfig, LedDevice * ledDevice);
 	static MessageForwarder * createMessageForwarder(const Json::Value & forwarderConfig);
@@ -241,15 +266,18 @@ private:
 	/// The priority muxer
 	PriorityMuxer _muxer;
 
-	/// The transformation from corrected colors to led colors
+	/// The transformation from raw colors to led colors
 	MultiColorTransform * _raw2ledTransform;
 	
 	/// The correction from raw colors to led colors
 	MultiColorCorrection * _raw2ledCorrection;
 	
-	/// The temperature from corrected colors to led colors
+	/// The temperature from raw colors to led colors
 	MultiColorCorrection * _raw2ledTemperature;
 	
+	/// The adjustment from raw colors to led colors
+	MultiColorAdjustment * _raw2ledAdjustment;
+	
 	/// The actual LedDevice
 	LedDevice * _device;
 

include/utils/RgbChannelAdjustment.h

@@ -0,0 +1,66 @@
+#pragma once
+
+// STL includes
+#include <cstdint>
+
+/// Correction for a single color byte value
+/// All configuration values are unsigned int and assume the color value to be between 0 and 255
+class RgbChannelAdjustment
+{
+public:
+	/// Default constructor
+	RgbChannelAdjustment();
+	
+	/// Constructor
+	/// @param adjustR  
+	/// @param adjustG 
+	/// @param adjustB 
+
+	RgbChannelAdjustment(int adjustR, int adjustG, int adjustB);
+
+	/// Destructor
+	~RgbChannelAdjustment();
+
+	/// @return The current adjustR value
+	uint8_t getadjustmentR() const;
+
+	/// @param threshold New adjustR value
+	void setadjustmentR(uint8_t adjustR);
+
+	/// @return The current adjustG value
+	uint8_t getadjustmentG() const;
+
+	/// @param gamma New adjustG value
+	void setadjustmentG(uint8_t adjustG);
+
+	/// @return The current adjustB value
+	uint8_t getadjustmentB() const;
+
+	/// @param blacklevel New adjustB value
+	void setadjustmentB(uint8_t adjustB);
+
+	/// Transform the given array value
+	/// @param input The input color bytes
+	/// @return The corrected byte value
+	uint8_t adjustmentR(uint8_t inputR) const;
+	uint8_t adjustmentG(uint8_t inputG) const;
+	uint8_t adjustmentB(uint8_t inputB) const;
+
+
+private:
+	/// (re)-initilize the color mapping
+	void initializeMapping();
+
+private:
+	/// The adjustment of R channel
+	int _adjustR;
+	/// The adjustment of G channel
+	int _adjustG;
+	/// The adjustment of B channel
+	int _adjustB;
+	
+	/// The mapping from input color to output color
+	int _mappingR[256];
+	int _mappingG[256];
+	int _mappingB[256];
+};

libsrc/effectengine/Effect.h

@@ -21,6 +21,12 @@ public:
 
 	int getPriority() const;
 	
+	std::string getScript() const { return _script; }
+	
+	int getTimeout() const {return _timeout; }
+	
+	Json::Value getArgs() const { return _args; }
+
 	bool isAbortRequested() const;
 
     /// This function registers the extension module in Python

libsrc/effectengine/EffectEngine.cpp

@@ -73,6 +73,23 @@ const std::list<EffectDefinition> &EffectEngine::getEffects() const
 	return _availableEffects;
 }
 
+const std::list<ActiveEffectDefinition> &EffectEngine::getActiveEffects()
+{
+	_availableActiveEffects.clear();
+	
+	for (Effect * effect : _activeEffects)
+	{
+		ActiveEffectDefinition activeEffectDefinition;
+		activeEffectDefinition.script = effect->getScript();
+		activeEffectDefinition.priority = effect->getPriority();
+		activeEffectDefinition.timeout = effect->getTimeout();
+		activeEffectDefinition.args = effect->getArgs();
+		_availableActiveEffects.push_back(activeEffectDefinition);
+	}
+  
+	return _availableActiveEffects;
+}
+
 bool EffectEngine::loadEffectDefinition(const std::string &path, const std::string &effectConfigFile, EffectDefinition & effectDefinition)
 {
 #ifdef ENABLE_QT5

libsrc/hyperion/CMakeLists.txt

@@ -19,6 +19,7 @@ SET(Hyperion_HEADERS
 
 		${CURRENT_SOURCE_DIR}/MultiColorTransform.h
 		${CURRENT_SOURCE_DIR}/MultiColorCorrection.h
+		${CURRENT_SOURCE_DIR}/MultiColorAdjustment.h
 		${CURRENT_HEADER_DIR}/MessageForwarder.h
 )
 
@@ -32,6 +33,7 @@ SET(Hyperion_SOURCES
 		${CURRENT_SOURCE_DIR}/ImageToLedsMap.cpp
 		${CURRENT_SOURCE_DIR}/MultiColorTransform.cpp
 		${CURRENT_SOURCE_DIR}/MultiColorCorrection.cpp
+		${CURRENT_SOURCE_DIR}/MultiColorAdjustment.cpp
 		${CURRENT_SOURCE_DIR}/LinearColorSmoothing.cpp
 		${CURRENT_SOURCE_DIR}/MessageForwarder.cpp
 )

libsrc/hyperion/Hyperion.cpp

@@ -17,6 +17,7 @@
 #include <hyperion/ImageProcessorFactory.h>
 #include <hyperion/ColorTransform.h>
 #include <hyperion/ColorCorrection.h>
+#include <hyperion/ColorAdjustment.h>
 
 // Leddevice includes
 #include <leddevice/LedDevice.h>
@@ -24,6 +25,7 @@
 
 #include "MultiColorTransform.h"
 #include "MultiColorCorrection.h"
+#include "MultiColorAdjustment.h"
 #include "LinearColorSmoothing.h"
 
 // effect engine includes
@@ -101,6 +103,7 @@ ColorTransform * Hyperion::createColorTransform(const Json::Value & transformCon
 	return transform;
 }
 
+
 ColorCorrection * Hyperion::createColorCorrection(const Json::Value & correctionConfig)
 {
 	const std::string id = correctionConfig.get("id", "default").asString();
@@ -117,6 +120,30 @@ ColorCorrection * Hyperion::createColorCorrection(const Json::Value & correction
 	return correction;
 }
 
+
+ColorAdjustment * Hyperion::createColorAdjustment(const Json::Value & adjustmentConfig)
+{
+	const std::string id = adjustmentConfig.get("id", "default").asString();
+
+	RgbChannelAdjustment * redAdjustment   = createRgbChannelAdjustment(adjustmentConfig["pureRed"],RED);
+	RgbChannelAdjustment * greenAdjustment = createRgbChannelAdjustment(adjustmentConfig["pureGreen"],GREEN);
+	RgbChannelAdjustment * blueAdjustment  = createRgbChannelAdjustment(adjustmentConfig["pureBlue"],BLUE);
+
+	ColorAdjustment * adjustment = new ColorAdjustment();
+	adjustment->_id = id;
+	adjustment->_rgbRedAdjustment   = *redAdjustment;
+	adjustment->_rgbGreenAdjustment = *greenAdjustment;
+	adjustment->_rgbBlueAdjustment  = *blueAdjustment;
+
+	// Cleanup the allocated individual adjustments
+	delete redAdjustment;
+	delete greenAdjustment;
+	delete blueAdjustment;
+
+	return adjustment;
+}
+
+
 MultiColorTransform * Hyperion::createLedColorsTransform(const unsigned ledCnt, const Json::Value & colorConfig)
 {
 	// Create the result, the transforms are added to this
@@ -206,7 +233,7 @@ MultiColorCorrection * Hyperion::createLedColorsCorrection(const unsigned ledCnt
 	}
 	else if (!correctionConfig.isArray())
 	{
-		ColorCorrection * colorCorrection = createColorCorrection(colorConfig);
+		ColorCorrection * colorCorrection = createColorCorrection(correctionConfig);
 		correction->addCorrection(colorCorrection);
 		correction->setCorrectionForLed(colorCorrection->_id, 0, ledCnt-1);
 	}
@@ -280,7 +307,7 @@ MultiColorCorrection * Hyperion::createLedColorsTemperature(const unsigned ledCn
 	}
 	else if (!correctionConfig.isArray())
 	{
-		ColorCorrection * colorCorrection = createColorCorrection(colorConfig);
+		ColorCorrection * colorCorrection = createColorCorrection(correctionConfig);
 		correction->addCorrection(colorCorrection);
 		correction->setCorrectionForLed(colorCorrection->_id, 0, ledCnt-1);
 	}
@@ -339,6 +366,80 @@ MultiColorCorrection * Hyperion::createLedColorsTemperature(const unsigned ledCn
 	return correction;
 }
 
+MultiColorAdjustment * Hyperion::createLedColorsAdjustment(const unsigned ledCnt, const Json::Value & colorConfig)
+{
+	// Create the result, the transforms are added to this
+	MultiColorAdjustment * adjustment = new MultiColorAdjustment(ledCnt);
+
+	const Json::Value adjustmentConfig = colorConfig.get("channelAdjustment", Json::nullValue);
+	if (adjustmentConfig.isNull())
+	{
+		// Old style color transformation config (just one for all leds)
+		ColorAdjustment * colorAdjustment = createColorAdjustment(colorConfig);
+		adjustment->addAdjustment(colorAdjustment);
+		adjustment->setAdjustmentForLed(colorAdjustment->_id, 0, ledCnt-1);
+	}
+	else if (!adjustmentConfig.isArray())
+	{
+		ColorAdjustment * colorAdjustment = createColorAdjustment(adjustmentConfig);
+		adjustment->addAdjustment(colorAdjustment);
+		adjustment->setAdjustmentForLed(colorAdjustment->_id, 0, ledCnt-1);
+	}
+	else
+	{
+		const QRegExp overallExp("([0-9]+(\\-[0-9]+)?)(,[ ]*([0-9]+(\\-[0-9]+)?))*");
+
+		for (Json::UInt i = 0; i < adjustmentConfig.size(); ++i)
+		{
+			const Json::Value & config = adjustmentConfig[i];
+			ColorAdjustment * colorAdjustment = createColorAdjustment(config);
+			adjustment->addAdjustment(colorAdjustment);
+
+			const QString ledIndicesStr = QString(config.get("leds", "").asCString()).trimmed();
+			if (ledIndicesStr.compare("*") == 0)
+			{
+				// Special case for indices '*' => all leds
+				adjustment->setAdjustmentForLed(colorAdjustment->_id, 0, ledCnt-1);
+				std::cout << "HYPERION INFO: ColorAdjustment '" << colorAdjustment->_id << "' => [0; "<< ledCnt-1 << "]" << std::endl;
+				continue;
+			}
+
+			if (!overallExp.exactMatch(ledIndicesStr))
+			{
+				std::cerr << "HYPERION ERROR: Given led indices " << i << " not correct format: " << ledIndicesStr.toStdString() << std::endl;
+				continue;
+			}
+
+			std::cout << "HYPERION INFO: ColorAdjustment '" << colorAdjustment->_id << "' => [";
+
+			const QStringList ledIndexList = ledIndicesStr.split(",");
+			for (int i=0; i<ledIndexList.size(); ++i) {
+				if (i > 0)
+				{
+					std::cout << ", ";
+				}
+				if (ledIndexList[i].contains("-"))
+				{
+					QStringList ledIndices = ledIndexList[i].split("-");
+					int startInd = ledIndices[0].toInt();
+					int endInd   = ledIndices[1].toInt();
+
+					adjustment->setAdjustmentForLed(colorAdjustment->_id, startInd, endInd);
+					std::cout << startInd << "-" << endInd;
+				}
+				else
+				{
+					int index = ledIndexList[i].toInt();
+					adjustment->setAdjustmentForLed(colorAdjustment->_id, index, index);
+					std::cout << index;
+				}
+			}
+			std::cout << "]" << std::endl;
+		}
+	}
+	return adjustment;
+}
+
 HsvTransform * Hyperion::createHsvTransform(const Json::Value & hsvConfig)
 {
 	const double saturationGain = hsvConfig.get("saturationGain", 1.0).asDouble();
@@ -376,6 +477,32 @@ RgbChannelCorrection* Hyperion::createRgbChannelCorrection(const Json::Value& co
 	return correction;
 }
 
+RgbChannelAdjustment* Hyperion::createRgbChannelAdjustment(const Json::Value& colorConfig, const RgbChannel color)
+{
+	int varR, varG, varB;
+	if (color == RED) 
+	{
+		varR = colorConfig.get("redChannel", 255).asInt();
+		varG = colorConfig.get("greenChannel", 0).asInt();
+		varB = colorConfig.get("blueChannel", 0).asInt();
+	}
+	else if (color == GREEN)
+	{
+		varR = colorConfig.get("redChannel", 0).asInt();
+		varG = colorConfig.get("greenChannel", 255).asInt();
+		varB = colorConfig.get("blueChannel", 0).asInt();
+	}		
+	else if (color == BLUE)
+	{
+		varR = colorConfig.get("redChannel", 0).asInt();
+		varG = colorConfig.get("greenChannel", 0).asInt();
+		varB = colorConfig.get("blueChannel", 255).asInt();
+	}
+
+	RgbChannelAdjustment* adjustment = new RgbChannelAdjustment(varR, varG, varB);
+	return adjustment;
+}
+
 LedString Hyperion::createLedString(const Json::Value& ledsConfig, const ColorOrder deviceOrder)
 {
 	LedString ledString;
@@ -490,6 +617,7 @@ MessageForwarder * Hyperion::getForwarder()
 Hyperion::Hyperion(const Json::Value &jsonConfig) :
 	_ledString(createLedString(jsonConfig["leds"], createColorOrder(jsonConfig["device"]))),
 	_muxer(_ledString.leds().size()),
+	_raw2ledAdjustment(createLedColorsAdjustment(_ledString.leds().size(), jsonConfig["color"])),
 	_raw2ledCorrection(createLedColorsCorrection(_ledString.leds().size(), jsonConfig["color"])),
 	_raw2ledTemperature(createLedColorsTemperature(_ledString.leds().size(), jsonConfig["color"])),
 	_raw2ledTransform(createLedColorsTransform(_ledString.leds().size(), jsonConfig["color"])),
@@ -498,6 +626,10 @@ Hyperion::Hyperion(const Json::Value &jsonConfig) :
 	_messageForwarder(createMessageForwarder(jsonConfig["forwarder"])),
 	_timer()
 {
+	if (!_raw2ledAdjustment->verifyAdjustments())
+	{
+		throw std::runtime_error("HYPERION ERROR: Color adjustment incorrectly set");
+	}
 	if (!_raw2ledCorrection->verifyCorrections())
 	{
 		throw std::runtime_error("HYPERION ERROR: Color correction incorrectly set");
@@ -552,6 +684,9 @@ Hyperion::~Hyperion()
 	// delete the color temperature correction
 	delete _raw2ledTemperature;
 	
+	// delete the color adjustment
+	delete _raw2ledAdjustment;
+
 	// delete the message forwarder
 	delete _messageForwarder;
 }
@@ -609,6 +744,11 @@ const std::vector<std::string> & Hyperion::getTemperatureIds() const
 	return _raw2ledTemperature->getCorrectionIds();
 }
 
+const std::vector<std::string> & Hyperion::getAdjustmentIds() const
+{
+	return _raw2ledAdjustment->getAdjustmentIds();
+}
+
 ColorTransform * Hyperion::getTransform(const std::string& id)
 {
 	return _raw2ledTransform->getTransform(id);
@@ -624,6 +764,11 @@ ColorCorrection * Hyperion::getTemperature(const std::string& id)
 	return _raw2ledTemperature->getCorrection(id);
 }
 
+ColorAdjustment * Hyperion::getAdjustment(const std::string& id)
+{
+	return _raw2ledAdjustment->getAdjustment(id);
+}
+
 void Hyperion::transformsUpdated()
 {
 	update();
@@ -639,6 +784,11 @@ void Hyperion::temperaturesUpdated()
 	update();
 }
 
+void Hyperion::adjustmentsUpdated()
+{
+	update();
+}
+
 void Hyperion::clear(int priority)
 {
 	if (_muxer.hasPriority(priority))
@@ -683,6 +833,11 @@ const std::list<EffectDefinition> & Hyperion::getEffects() const
 	return _effectEngine->getEffects();
 }
 
+const std::list<ActiveEffectDefinition> & Hyperion::getActiveEffects()
+{
+	return _effectEngine->getActiveEffects();
+}
+
 int Hyperion::setEffect(const std::string &effectName, int priority, int timeout)
 {
 	return _effectEngine->runEffect(effectName, priority, timeout);
@@ -703,9 +858,11 @@ void Hyperion::update()
 	const PriorityMuxer::InputInfo & priorityInfo  = _muxer.getInputInfo(priority);
 
 	// Apply the correction and the transform to each led and color-channel
-	std::vector<ColorRgb> correctedColors = _raw2ledCorrection->applyCorrection(priorityInfo.ledColors);
+	// Avoid applying correction, the same task is performed by adjustment
-	std::vector<ColorRgb> temperatureColors = _raw2ledTemperature->applyCorrection(correctedColors);
+	// std::vector<ColorRgb> correctedColors = _raw2ledCorrection->applyCorrection(priorityInfo.ledColors);
-	std::vector<ColorRgb> ledColors =_raw2ledTransform->applyTransform(temperatureColors);
+	std::vector<ColorRgb> adjustedColors = _raw2ledAdjustment->applyAdjustment(priorityInfo.ledColors);
+	std::vector<ColorRgb> transformColors =_raw2ledTransform->applyTransform(adjustedColors);
+	std::vector<ColorRgb> ledColors = _raw2ledTemperature->applyCorrection(transformColors);
 	const std::vector<Led>& leds = _ledString.leds();
 	int i = 0;
 	for (ColorRgb& color : ledColors)

libsrc/hyperion/MultiColorAdjustment.cpp

@@ -0,0 +1,124 @@
+
+// STL includes
+#include <cassert>
+
+// Hyperion includes
+#include "MultiColorAdjustment.h"
+
+MultiColorAdjustment::MultiColorAdjustment(const unsigned ledCnt) :
+	_ledAdjustments(ledCnt, nullptr)
+{
+}
+
+MultiColorAdjustment::~MultiColorAdjustment()
+{
+	// Clean up all the transforms
+	for (ColorAdjustment * adjustment : _adjustment)
+	{
+		delete adjustment;
+	}
+}
+
+void MultiColorAdjustment::addAdjustment(ColorAdjustment * adjustment)
+{
+	_adjustmentIds.push_back(adjustment->_id);
+	_adjustment.push_back(adjustment);
+}
+
+void MultiColorAdjustment::setAdjustmentForLed(const std::string& id, const unsigned startLed, const unsigned endLed)
+{
+	assert(startLed <= endLed);
+	assert(endLed < _ledAdjustments.size());
+
+	// Get the identified adjustment (don't care if is nullptr)
+	ColorAdjustment * adjustment = getAdjustment(id);
+	for (unsigned iLed=startLed; iLed<=endLed; ++iLed)
+	{
+		_ledAdjustments[iLed] = adjustment;
+	}
+}
+
+bool MultiColorAdjustment::verifyAdjustments() const
+{
+	bool allLedsSet = true;
+	for (unsigned iLed=0; iLed<_ledAdjustments.size(); ++iLed)
+	{
+		if (_ledAdjustments[iLed] == nullptr)
+		{
+			std::cerr << "HYPERION (C.adjustment) ERROR: No adjustment set for " << iLed << std::endl;
+			allLedsSet = false;
+		}
+	}
+	return allLedsSet;
+}
+
+const std::vector<std::string> & MultiColorAdjustment::getAdjustmentIds()
+{
+	return _adjustmentIds;
+}
+
+ColorAdjustment* MultiColorAdjustment::getAdjustment(const std::string& id)
+{
+	// Iterate through the unique adjustments until we find the one with the given id
+	for (ColorAdjustment* adjustment : _adjustment)
+	{
+		if (adjustment->_id == id)
+		{
+			return adjustment;
+		}
+	}
+
+	// The ColorAdjustment was not found
+	return nullptr;
+}
+
+std::vector<ColorRgb> MultiColorAdjustment::applyAdjustment(const std::vector<ColorRgb>& rawColors)
+{
+	// Create a copy, as we will do the rest of the adjustment in place
+	std::vector<ColorRgb> ledColors(rawColors);
+
+	const size_t itCnt = std::min(_ledAdjustments.size(), rawColors.size());
+	for (size_t i=0; i<itCnt; ++i)
+	{
+		ColorAdjustment* adjustment = _ledAdjustments[i];
+		if (adjustment == nullptr)
+		{
+			// No transform set for this led (do nothing)
+			continue;
+		}
+		ColorRgb& color = ledColors[i];
+		
+		int RR = adjustment->_rgbRedAdjustment.adjustmentR(color.red);
+		int RG = adjustment->_rgbRedAdjustment.adjustmentG(color.red);
+		int RB = adjustment->_rgbRedAdjustment.adjustmentB(color.red);
+		int GR = adjustment->_rgbGreenAdjustment.adjustmentR(color.green);
+		int GG = adjustment->_rgbGreenAdjustment.adjustmentG(color.green);
+		int GB = adjustment->_rgbGreenAdjustment.adjustmentB(color.green);
+		int BR = adjustment->_rgbBlueAdjustment.adjustmentR(color.blue);
+		int BG = adjustment->_rgbBlueAdjustment.adjustmentG(color.blue);
+		int BB = adjustment->_rgbBlueAdjustment.adjustmentB(color.blue);
+				
+		int ledR = RR + GR + BR;
+		int maxR = (int)adjustment->_rgbRedAdjustment.getadjustmentR();
+		int ledG = RG + GG + BG;
+		int maxG = (int)adjustment->_rgbGreenAdjustment.getadjustmentG();
+		int ledB = RB + GB + BB;
+		int maxB = (int)adjustment->_rgbBlueAdjustment.getadjustmentB();
+		
+		if (ledR > maxR)
+		  color.red = (uint8_t)maxR;
+		else
+		  color.red = (uint8_t)ledR;
+		
+		if (ledG > maxG)
+		  color.green = (uint8_t)maxG;
+		else
+		  color.green = (uint8_t)ledG;
+		
+		if (ledB > maxB)
+		  color.blue = (uint8_t)maxB;
+		else
+		  color.blue = (uint8_t)ledB;
+	}
+	return ledColors;
+}

libsrc/hyperion/MultiColorAdjustment.h

@@ -0,0 +1,66 @@
+#pragma once
+
+// STL includes
+#include <vector>
+
+// Utils includes
+#include <utils/ColorRgb.h>
+
+// Hyperion includes
+#include <hyperion/ColorAdjustment.h>
+
+///
+/// The LedColorTransform is responsible for performing color transformation from 'raw' colors
+/// received as input to colors mapped to match the color-properties of the leds.
+///
+class MultiColorAdjustment
+{
+public:
+	MultiColorAdjustment(const unsigned ledCnt);
+	~MultiColorAdjustment();
+
+	/**
+	 * Adds a new ColorAdjustment to this MultiColorTransform
+	 *
+	 * @param adjustment The new ColorAdjustment (ownership is transfered)
+	 */
+	void addAdjustment(ColorAdjustment * adjustment);
+
+	void setAdjustmentForLed(const std::string& id, const unsigned startLed, const unsigned endLed);
+
+	bool verifyAdjustments() const;
+
+	///
+	/// Returns the identifier of all the unique ColorAdjustment
+	///
+	/// @return The list with unique id's of the ColorAdjustment
+	const std::vector<std::string> & getAdjustmentIds();
+
+	///
+	/// Returns the pointer to the ColorAdjustment with the given id
+	///
+	/// @param id The identifier of the ColorAdjustment
+	///
+	/// @return The ColorAdjustment with the given id (or nullptr if it does not exist)
+	///
+	ColorAdjustment* getAdjustment(const std::string& id);
+
+	///
+	/// Performs the color adjustment from raw-color to led-color
+	///
+	/// @param rawColors The list with raw colors
+	///
+	/// @return The list with led-colors
+	///
+	std::vector<ColorRgb> applyAdjustment(const std::vector<ColorRgb>& rawColors);
+
+private:
+	/// List with transform ids
+	std::vector<std::string> _adjustmentIds;
+
+	/// List with unique ColorTransforms
+	std::vector<ColorAdjustment*> _adjustment;
+
+	/// List with a pointer to the ColorAdjustment for each individual led
+	std::vector<ColorAdjustment*> _ledAdjustments;
+};

libsrc/jsonserver/JsonClientConnection.cpp

@@ -19,6 +19,7 @@
 #include <hyperion/MessageForwarder.h>
 #include <hyperion/ColorTransform.h>
 #include <hyperion/ColorCorrection.h>
+#include <hyperion/ColorAdjustment.h>
 #include <utils/ColorRgb.h>
 
 // project includes
@@ -252,6 +253,8 @@ void JsonClientConnection::handleMessage(const std::string &messageString)
 		handleCorrectionCommand(message);
 	else if (command == "temperature")
 		handleTemperatureCommand(message);
+	else if (command == "adjustment")
+		handleAdjustmentCommand(message);
 	else
 		handleNotImplemented();
 }
@@ -471,6 +474,34 @@ void JsonClientConnection::handleServerInfoCommand(const Json::Value &)
 		whitelevel.append(colorTransform->_rgbBlueTransform.getWhitelevel());
 	}
 	
+	// collect adjustment information
+	Json::Value & adjustmentArray = info["adjustment"];
+	for (const std::string& adjustmentId : _hyperion->getAdjustmentIds())
+	{
+		const ColorAdjustment * colorAdjustment = _hyperion->getAdjustment(adjustmentId);
+		if (colorAdjustment == nullptr)
+		{
+			std::cerr << "JSONCLIENT ERROR: Incorrect color adjustment id: " << adjustmentId << std::endl;
+			continue;
+		}
+
+		Json::Value & adjustment = adjustmentArray.append(Json::Value());
+		adjustment["id"] = adjustmentId;
+
+		Json::Value & redAdjust = adjustment["redAdjust"];
+		redAdjust.append(colorAdjustment->_rgbRedAdjustment.getadjustmentR());
+		redAdjust.append(colorAdjustment->_rgbRedAdjustment.getadjustmentG());
+		redAdjust.append(colorAdjustment->_rgbRedAdjustment.getadjustmentB());
+		Json::Value & greenAdjust = adjustment["greenAdjust"];
+		greenAdjust.append(colorAdjustment->_rgbGreenAdjustment.getadjustmentR());
+		greenAdjust.append(colorAdjustment->_rgbGreenAdjustment.getadjustmentG());
+		greenAdjust.append(colorAdjustment->_rgbGreenAdjustment.getadjustmentB());
+		Json::Value & blueAdjust = adjustment["blueAdjust"];
+		blueAdjust.append(colorAdjustment->_rgbBlueAdjustment.getadjustmentR());
+		blueAdjust.append(colorAdjustment->_rgbBlueAdjustment.getadjustmentG());
+		blueAdjust.append(colorAdjustment->_rgbBlueAdjustment.getadjustmentB());
+	}
+
 	// collect effect info
 	Json::Value & effects = info["effects"] = Json::Value(Json::arrayValue);
 	const std::list<EffectDefinition> & effectsDefinitions = _hyperion->getEffects();
@@ -484,6 +515,20 @@ void JsonClientConnection::handleServerInfoCommand(const Json::Value &)
 		effects.append(effect);
 	}
 	
+	// collect active effect info
+	Json::Value & activeEffects = info["activeEffects"] = Json::Value(Json::arrayValue);
+	const std::list<ActiveEffectDefinition> & activeEffectsDefinitions = _hyperion->getActiveEffects();
+	for (const ActiveEffectDefinition & activeEffectDefinition : activeEffectsDefinitions)
+	{
+		Json::Value activeEffect;
+		activeEffect["script"] = activeEffectDefinition.script;
+		activeEffect["priority"] = activeEffectDefinition.priority;
+		activeEffect["timeout"] = activeEffectDefinition.timeout;
+		activeEffect["args"] = activeEffectDefinition.args;
+
+		activeEffects.append(activeEffect);
+	}
+
 	// send the result
 	sendMessage(result);
 }
@@ -635,6 +680,47 @@ void JsonClientConnection::handleTemperatureCommand(const Json::Value &message)
 	sendSuccessReply();
 }
 
+void JsonClientConnection::handleAdjustmentCommand(const Json::Value &message)
+{
+	const Json::Value & adjustment = message["adjustment"];
+
+	const std::string adjustmentId = adjustment.get("id", _hyperion->getAdjustmentIds().front()).asString();
+	ColorAdjustment * colorAdjustment = _hyperion->getAdjustment(adjustmentId);
+	if (colorAdjustment == nullptr)
+	{
+		//sendErrorReply(std::string("Incorrect transform identifier: ") + transformId);
+		return;
+	}
+		
+	if (adjustment.isMember("redAdjust"))
+	{
+		const Json::Value & values = adjustment["redAdjust"];
+		colorAdjustment->_rgbRedAdjustment.setadjustmentR(values[0u].asInt());
+		colorAdjustment->_rgbRedAdjustment.setadjustmentG(values[1u].asInt());
+		colorAdjustment->_rgbRedAdjustment.setadjustmentB(values[2u].asInt());
+	}
+
+	if (adjustment.isMember("greenAdjust"))
+	{
+		const Json::Value & values = adjustment["greenAdjust"];
+		colorAdjustment->_rgbGreenAdjustment.setadjustmentR(values[0u].asInt());
+		colorAdjustment->_rgbGreenAdjustment.setadjustmentG(values[1u].asInt());
+		colorAdjustment->_rgbGreenAdjustment.setadjustmentB(values[2u].asInt());
+	}
+
+	if (adjustment.isMember("blueAdjust"))
+	{
+		const Json::Value & values = adjustment["blueAdjust"];
+		colorAdjustment->_rgbBlueAdjustment.setadjustmentR(values[0u].asInt());
+		colorAdjustment->_rgbBlueAdjustment.setadjustmentG(values[1u].asInt());
+		colorAdjustment->_rgbBlueAdjustment.setadjustmentB(values[2u].asInt());
+	}	
+	// commit the changes
+	_hyperion->adjustmentsUpdated();
+
+	sendSuccessReply();
+}
+	
 void JsonClientConnection::handleNotImplemented()
 {
 	sendErrorReply("Command not implemented");
@@ -712,7 +798,6 @@ void JsonClientConnection::sendMessage(const Json::Value & message, QTcpSocket *
 
 }
 
-
 void JsonClientConnection::sendSuccessReply()
 {
 	// create reply

libsrc/jsonserver/JsonClientConnection.h

@@ -127,6 +127,13 @@ private:
 	///
 	void handleTemperatureCommand(const Json::Value & message);
 	
+	///
+	/// Handle an incoming JSON Adjustment message
+	///
+	/// @param message the incoming message
+	///
+	void handleAdjustmentCommand(const Json::Value & message);
+
 	///
 	/// Handle an incoming JSON message of unknown type
 	///

libsrc/jsonserver/JsonSchemas.qrc

@@ -9,6 +9,7 @@
         <file alias="schema-transform">schema/schema-transform.json</file>
         <file alias="schema-correction">schema/schema-correction.json</file>
         <file alias="schema-temperature">schema/schema-temperature.json</file>
+        <file alias="schema-adjustment">schema/schema-adjustment.json</file>
         <file alias="schema-effect">schema/schema-effect.json</file>
     </qresource>
 </RCC>

libsrc/jsonserver/schema/schema-adjustment.json

@@ -0,0 +1,56 @@
+{
+	"type":"object",
+	"required":true,
+	"properties":{
+		"command": {
+			"type" : "string",
+			"required" : true,
+			"enum" : ["adjustment"]
+		},
+		"adjustment": {
+			"type": "object",
+			"required": true,
+			"properties": {
+				"id" : {
+					"type" : "string",
+					"required" : false
+				},
+				"redAdjust": {
+					"type": "array",
+					"required": false,
+					"items" : {
+						"type": "integer",
+						"minimum": 0,
+						"maximum": 255
+					},
+					"minItems": 3,
+					"maxItems": 3
+				},
+				"greenAdjust": {
+					"type": "array",
+					"required": false,
+					"items" : {
+						"type": "integer",
+						"minimum": 0,
+						"maximum": 255
+					},
+					"minItems": 3,
+					"maxItems": 3
+				},
+				"blueAdjust": {
+					"type": "array",
+					"required": false,
+					"items" : {
+						"type": "integer",
+						"minimum": 0,
+						"maximum": 255
+					},
+					"minItems": 3,
+					"maxItems": 3
+				}
+			},
+			"additionalProperties": false
+		}
+	},
+	"additionalProperties": false
+}

libsrc/jsonserver/schema/schema.json

@@ -5,7 +5,7 @@
         "command": {
             "type" : "string",
             "required" : true,
-            "enum" : ["color", "image", "effect", "serverinfo", "clear", "clearall", "transform", "correction", "temperature"]
+            "enum" : ["color", "image", "effect", "serverinfo", "clear", "clearall", "transform", "correction", "temperature", "adjustment"]
         }
     }
 }

libsrc/leddevice/LedDeviceAtmoOrb.cpp

@@ -15,9 +15,9 @@ AtmoOrbLight::AtmoOrbLight(unsigned int id) {
     // Not implemented
 }
 
-LedDeviceAtmoOrb::LedDeviceAtmoOrb(const std::string &output, bool switchOffOnBlack,
+LedDeviceAtmoOrb::LedDeviceAtmoOrb(const std::string &output, bool useOrbSmoothing,
-                                   int transitiontime, int port, int numLeds, std::vector<unsigned int> orbIds) :
+                                   int transitiontime, int skipSmoothingDiff, int port, int numLeds, std::vector<unsigned int> orbIds) :
-        multicastGroup(output.c_str()), switchOffOnBlack(switchOffOnBlack), transitiontime(transitiontime),
+        multicastGroup(output.c_str()), useOrbSmoothing(useOrbSmoothing), transitiontime(transitiontime), skipSmoothingDiff(skipSmoothingDiff),
         multiCastGroupPort(port), numLeds(numLeds), orbIds(orbIds) {
     manager = new QNetworkAccessManager();
     groupAddress = QHostAddress(multicastGroup);
@@ -35,37 +35,64 @@ int LedDeviceAtmoOrb::write(const std::vector <ColorRgb> &ledValues) {
         return 0;
     }
 
-    // Iterate through colors and set Orb color
+    // Command options:
-    // Start off with idx 1 as 0 is reserved for controlling all orbs at once
-    unsigned int idx = 1;
-    for (const ColorRgb &color : ledValues) {
-        // Options parameter:
     //
     // 1 = force off
     // 2 = use lamp smoothing and validate by Orb ID
     // 4 = validate by Orb ID
-        //
 
-        if (switchOffOnBlack && color.red == 0 && color.green == 0 && color.blue == 0) {
+    // When setting useOrbSmoothing = true it's recommended to disable Hyperion's own smoothing as it will conflict (double smoothing)
-            // Force to black
+    int commandType = 4;
-            for (unsigned int i = 0; i < orbIds.size(); i++) {
+    if(useOrbSmoothing)
-                if (orbIds[i] == idx) {
+    {
-                    setColor(idx, color, 1);
+        commandType = 2;
     }
+
+    // Iterate through colors and set Orb color
+    // Start off with idx 1 as 0 is reserved for controlling all orbs at once
+    unsigned int idx = 1;
+
+    for (const ColorRgb &color : ledValues) {
+        // Retrieve last send colors
+        int lastRed = lastColorRedMap[idx];
+        int lastGreen = lastColorGreenMap[idx];
+        int lastBlue = lastColorBlueMap[idx];
+
+        // If last colors send are identical than last send return
+        if(lastRed == color.red && lastGreen == color.green && lastBlue == color.blue)
+        {
+            return 0;
         }
-        }
+
-        else {
+        // If color difference is higher than skipSmoothingDiff than we skip Orb smoothing (if enabled) and send it right away
-            // Default send color
+        if ((skipSmoothingDiff != 0 && useOrbSmoothing) && (abs(color.red - lastRed) >= skipSmoothingDiff || abs(color.blue - lastBlue) >= skipSmoothingDiff ||
+                abs(color.green - lastGreen) >= skipSmoothingDiff))
+        {
+            // Skip Orb smoothing when using  (command type 4)
             for (unsigned int i = 0; i < orbIds.size(); i++) {
                 if (orbIds[i] == idx) {
                     setColor(idx, color, 4);
                 }
             }
         }
+        else {
+            // Send color
+            for (unsigned int i = 0; i < orbIds.size(); i++) {
+                if (orbIds[i] == idx) {
+                    setColor(idx, color, commandType);
+                }
+            }
+        }
+
+        // Store last colors send for light id
+        lastColorRedMap[idx] = color.red;
+        lastColorGreenMap[idx] = color.green;
+        lastColorBlueMap[idx] = color.blue;
 
         // Next light id.
         idx++;
     }
+
     return 0;
 }
 
@@ -80,7 +107,7 @@ void LedDeviceAtmoOrb::setColor(unsigned int orbId, const ColorRgb &color, int c
     bytes[2] = 0xEE;
 
     // Command type
-    bytes[3] = 2;
+    bytes[3] = commandType;
 
     // Orb ID
     bytes[4] = orbId;

libsrc/leddevice/LedDeviceAtmoOrb.h

@@ -35,10 +35,10 @@ public:
 class LedDeviceAtmoOrb : public QObject, public LedDevice {
     Q_OBJECT
 public:
-    // Last color sent
+    // Last send color map
-    int lastRed;
+    QMap<int, int> lastColorRedMap;
-    int lastGreen;
+    QMap<int, int> lastColorGreenMap;
-    int lastBlue;
+    QMap<int, int> lastColorBlueMap;
 
     // Multicast status
     bool joinedMulticastgroup;
@@ -48,21 +48,21 @@ public:
     ///
     /// @param output is the multicast address of Orbs
     ///
-    /// @param switchOffOnBlack turn off Orbs on black (default: false)
-    ///
     /// @param transitiontime is optional and not used at the moment
     ///
+    /// @param useOrbSmoothing use Orbs own (external) smoothing algorithm (default: false)
+    ///
+    /// @param skipSmoothingDiff  minimal color (0-255) difference to override smoothing so that if current and previously received colors are higher than set dif we override smoothing
+    ///
     /// @param port is the multicast port.
     ///
     /// @param numLeds is the total amount of leds per Orb
     ///
     /// @param array containing orb ids
     ///
-    LedDeviceAtmoOrb(const std::string &output, bool switchOffOnBlack =
+    LedDeviceAtmoOrb(const std::string &output, bool useOrbSmoothing =
-    false, int transitiontime = 0, int port = 49692, int numLeds = 24,
+    false, int transitiontime = 0, int skipSmoothingDiff = 0, int port = 49692, int numLeds = 24,
-                     std::vector<unsigned int> orbIds = std::vector < unsigned int
+                     std::vector<unsigned int> orbIds = std::vector < unsigned int>());
-
-    >());
 
     ///
     /// Destructor of this device
@@ -87,12 +87,15 @@ private:
     /// String containing multicast group IP address
     QString multicastGroup;
 
-    /// Switch off when detecting black
+    /// use Orbs own (external) smoothing algorithm
-    bool switchOffOnBlack;
+    bool useOrbSmoothing;
 
     /// Transition time between colors (not implemented)
     int transitiontime;
 
+    // Maximum allowed color difference, will skip Orb (external) smoothing once reached
+    int skipSmoothingDiff;
+
     /// Multicast port to send data to
     int multiCastGroupPort;
 

libsrc/leddevice/LedDeviceFactory.cpp

@@ -206,11 +206,21 @@ LedDevice * LedDeviceFactory::construct(const Json::Value & deviceConfig)
 	{
 		const std::string output     = deviceConfig.get("output",     "").asString();
 		const std::string assignment = deviceConfig.get("assignment", "").asString();
+		const Json::Value gpioMapping = deviceConfig.get("gpiomap", Json::nullValue);
 
-		LedDevicePiBlaster * devicePiBlaster = new LedDevicePiBlaster(output, assignment);
+		if (assignment.length() > 0) {
+			std::cout << "ERROR: Sorry, the configuration syntax has changed in this version." << std::endl;
+			exit(EXIT_FAILURE);
+		}
+		if (! gpioMapping.isNull() ) {
+			LedDevicePiBlaster * devicePiBlaster = new LedDevicePiBlaster(output, gpioMapping);
 			devicePiBlaster->open();
 
 			device = devicePiBlaster;
+		} else {
+			std::cout << "ERROR: no gpiomap defined." << std::endl;
+			exit(EXIT_FAILURE);
+		}
 	}
 	else if (type == "sedu")
 	{
@@ -249,8 +259,9 @@ LedDevice * LedDeviceFactory::construct(const Json::Value & deviceConfig)
 	else if (type == "atmoorb")
 	{
 		const std::string output = deviceConfig["output"].asString();
-		const bool switchOffOnBlack = deviceConfig.get("switchOffOnBlack", true).asBool();
+		const bool useOrbSmoothing = deviceConfig.get("useOrbSmoothing", false).asBool();
 		const int transitiontime = deviceConfig.get("transitiontime", 1).asInt();
+		const int skipSmoothingDiff = deviceConfig.get("skipSmoothingDiff", 0).asInt();
 		const int port = deviceConfig.get("port", 1).asInt();
 		const int numLeds = deviceConfig.get("numLeds", 1).asInt();
 		const std::string orbId = deviceConfig["orbIds"].asString();
@@ -273,7 +284,7 @@ LedDevice * LedDeviceFactory::construct(const Json::Value & deviceConfig)
 		  orbIds.push_back(atoi(orbId.c_str()));
 		}
 
-		device = new LedDeviceAtmoOrb(output, switchOffOnBlack, transitiontime, port, numLeds, orbIds);
+		device = new LedDeviceAtmoOrb(output, useOrbSmoothing, transitiontime, skipSmoothingDiff, port, numLeds, orbIds);
 	}
 	else if (type == "file")
 	{

libsrc/leddevice/LedDevicePiBlaster.cpp

@@ -2,6 +2,11 @@
 // STL includes
 #include <cerrno>
 #include <cstring>
+#include <csignal>
+
+
+// jsoncpp includes
+#include <json/json.h>
 
 // QT includes
 #include <QFile>
@@ -9,12 +14,40 @@
 // Local LedDevice includes
 #include "LedDevicePiBlaster.h"
 
-LedDevicePiBlaster::LedDevicePiBlaster(const std::string & deviceName, const std::string & channelAssignment) :
+LedDevicePiBlaster::LedDevicePiBlaster(const std::string & deviceName, const Json::Value & gpioMapping) :
 	_deviceName(deviceName),
-	_channelAssignment(channelAssignment),
 	_fid(nullptr)
 {
-	// empty
+
+	signal(SIGPIPE,  SIG_IGN);
+
+// initialise the mapping tables
+// -1 is invalid
+// z is also meaningless
+// { "gpio" : 4, "ledindex" : 0, "ledcolor" : "r" },
+	#define TABLE_SZ sizeof(_gpio_to_led)/sizeof(_gpio_to_led[0])
+
+	for (int i=0; i <  TABLE_SZ; i++ )
+	{
+		_gpio_to_led[i] = -1;
+		_gpio_to_color[i] = 'z';
+	}
+
+// walk through the json config and populate the mapping tables
+	for (const Json::Value& gpioMap : gpioMapping)
+	{
+		const int gpio = gpioMap.get("gpio",-1).asInt();
+		const int ledindex = gpioMap.get("ledindex",-1).asInt();
+		const std::string ledcolor = gpioMap.get("ledcolor","z").asString();
+//		printf ("got gpio %d ledindex %d color %c\n", gpio,ledindex, ledcolor[0]);
+		// ignore missing/invalid settings
+		if ( (gpio >= 0) && (gpio < TABLE_SZ) && (ledindex >= 0) ){
+			_gpio_to_led[gpio] = ledindex;
+			_gpio_to_color[gpio] = ledcolor[0]; // 1st char of string
+		} else {
+			printf ("IGNORING gpio %d ledindex %d color %c\n", gpio,ledindex, ledcolor[0]);
+		}
+	}
 }
 
 LedDevicePiBlaster::~LedDevicePiBlaster()
@@ -63,15 +96,6 @@ int LedDevicePiBlaster::open(bool report)
 	return 0;
 }
 
-//Channel number    GPIO number   Pin in P1 header
-//      0               4             P1-7
-//      1              17             P1-11
-//      2              18             P1-12
-//      3              21             P1-13
-//      4              22             P1-15
-//      5              23             P1-16
-//      6              24             P1-18
-//      7              25             P1-22
 int LedDevicePiBlaster::write(const std::vector<ColorRgb> & ledValues)
 {
 	// Attempt to open if not yet opened
@@ -80,32 +104,47 @@ int LedDevicePiBlaster::write(const std::vector<ColorRgb> & ledValues)
 		return -1;
 	}
 
-	std::vector<int> iPins = {4, 17, 18, 27, 21, 22, 23, 24, 25};
+	int valueIdx = -1;
-
+	for (unsigned int i=0; i < TABLE_SZ; i++ )
-	unsigned colorIdx = 0;
+	{
-	for (unsigned iPin=0; iPin<iPins.size(); ++iPin)
+		valueIdx = _gpio_to_led[ i ];
+		if ( (valueIdx >= 0) && (valueIdx < (signed) ledValues.size()) ) 
 		{
 			double pwmDutyCycle = 0.0;
-		switch (_channelAssignment[iPin])
+//			printf ("iPin %d valueIdx %d color %c\n", iPin, valueIdx, _gpio_to_color[ iPins[iPin] ] ) ;
+			switch (_gpio_to_color[ i ]) 
 			{
 			case 'r':
-			pwmDutyCycle = ledValues[colorIdx].red / 255.0;
+				pwmDutyCycle = ledValues[valueIdx].red / 255.0;
-			++colorIdx;
 				break;
 			case 'g':
-			pwmDutyCycle = ledValues[colorIdx].green / 255.0;
+				pwmDutyCycle = ledValues[valueIdx].green / 255.0;
-			++colorIdx;
 				break;
 			case 'b':
-			pwmDutyCycle = ledValues[colorIdx].blue / 255.0;
+				pwmDutyCycle = ledValues[valueIdx].blue / 255.0;
-			++colorIdx;
+				break;
+			case 'w':
+				pwmDutyCycle = ledValues[valueIdx].red;
+				pwmDutyCycle += ledValues[valueIdx].green;
+				pwmDutyCycle += ledValues[valueIdx].blue;
+				pwmDutyCycle /= (3.0*255.0);
 				break;
 			default:
 				continue;
 			}
 
-		fprintf(_fid, "%i=%f\n", iPins[iPin], pwmDutyCycle);
+//			fprintf(_fid, "%i=%f\n", iPins[iPin], pwmDutyCycle);
-		fflush(_fid);
+
+			if ( (fprintf(_fid, "%i=%f\n", i, pwmDutyCycle) < 0) 
+			  || (fflush(_fid) < 0)) {
+				if (_fid != nullptr)
+				{
+					fclose(_fid);
+					_fid = nullptr;
+					return -1;
+				}
+			}
+		}
 	}
 
 	return 0;
@@ -119,13 +158,13 @@ int LedDevicePiBlaster::switchOff()
 		return -1;
 	}
 
-	std::vector<int> iPins = {4, 17, 18, 21, 22, 23, 24, 25};
+	int valueIdx = -1;
-
+	for (unsigned int i=0; i < TABLE_SZ; i++ )
-	for (unsigned iPin=0; iPin<iPins.size(); ++iPin)
 	{
-		if (_channelAssignment[iPin] != ' ')
+		valueIdx = _gpio_to_led[ i ];
+		if (valueIdx >= 0)
 		{
-			fprintf(_fid, "%i=%f\n", iPins[iPin], 0.0);
+			fprintf(_fid, "%i=%f\n", i, 0.0);
 			fflush(_fid);
 		}
 	}

libsrc/leddevice/LedDevicePiBlaster.h

@@ -4,6 +4,9 @@
 // STL includes
 #include <cstdio>
 
+// jsoncpp includes
+#include <json/json.h>
+
 // Hyperion-Leddevice includes
 #include <leddevice/LedDevice.h>
 
@@ -14,9 +17,9 @@ public:
 	/// Constructs the PiBlaster device which writes to the indicated device and for the assigned
 	/// channels
 	/// @param deviceName The name of the output device
-	/// @param channelAssignment The RGB-Channel assignment (8 characters long)
+	/// @param gpioMapping The RGB-Channel assignment json object
 	///
-	LedDevicePiBlaster(const std::string & deviceName, const std::string & channelAssignment);
+	LedDevicePiBlaster(const std::string & deviceName, const Json::Value & gpioMapping);
 
 	virtual ~LedDevicePiBlaster();
 
@@ -50,9 +53,8 @@ private:
 	/// The name of the output device (very likely '/dev/pi-blaster')
 	const std::string _deviceName;
 
-	/// String with eight characters with the rgb-channel assignment per pwm-channel
+	int _gpio_to_led[64];
-	/// ('r' = red, 'g' = green, 'b' = blue, ' ' = empty)
+	char _gpio_to_color[64];
-	const std::string _channelAssignment;
 
 	/// File-Pointer to the PiBlaster device
 	FILE * _fid;

libsrc/utils/CMakeLists.txt

@@ -29,6 +29,8 @@ add_library(hyperion-utils
 		${CURRENT_SOURCE_DIR}/RgbChannelTransform.cpp
 		${CURRENT_HEADER_DIR}/RgbChannelCorrection.h
 		${CURRENT_SOURCE_DIR}/RgbChannelCorrection.cpp
+		${CURRENT_HEADER_DIR}/RgbChannelAdjustment.h
+		${CURRENT_SOURCE_DIR}/RgbChannelAdjustment.cpp
 
 		${CURRENT_HEADER_DIR}/jsonschema/JsonFactory.h
 		${CURRENT_HEADER_DIR}/jsonschema/JsonSchemaChecker.h

libsrc/utils/RgbChannelAdjustment.cpp

@@ -0,0 +1,107 @@
+// STL includes
+#include <cmath>
+
+// Utils includes
+#include <utils/RgbChannelAdjustment.h>
+
+RgbChannelAdjustment::RgbChannelAdjustment() :
+	_adjustR(255),
+	_adjustG(255),
+	_adjustB(255)
+{
+	initializeMapping();
+}
+
+RgbChannelAdjustment::RgbChannelAdjustment(int adjustR, int adjustG, int adjustB) :
+	_adjustR(adjustR),
+	_adjustG(adjustG),
+	_adjustB(adjustB)
+{
+	initializeMapping();
+}
+
+RgbChannelAdjustment::~RgbChannelAdjustment()
+{
+}
+
+uint8_t RgbChannelAdjustment::getadjustmentR() const
+{
+	return _adjustR;
+}
+
+void RgbChannelAdjustment::setadjustmentR(uint8_t adjustR)
+{
+	_adjustR = adjustR;
+	initializeMapping();
+}
+
+uint8_t RgbChannelAdjustment::getadjustmentG() const
+{
+	return _adjustG;
+}
+
+void RgbChannelAdjustment::setadjustmentG(uint8_t adjustG)
+{
+	_adjustG = adjustG;
+	initializeMapping();
+}
+
+uint8_t RgbChannelAdjustment::getadjustmentB() const
+{
+	return _adjustB;
+}
+
+void RgbChannelAdjustment::setadjustmentB(uint8_t adjustB)
+{
+	_adjustB = adjustB;
+	initializeMapping();
+}
+
+uint8_t RgbChannelAdjustment::adjustmentR(uint8_t inputR) const
+{
+	return _mappingR[inputR];
+}
+
+uint8_t RgbChannelAdjustment::adjustmentG(uint8_t inputG) const
+{
+	return _mappingG[inputG];
+}
+
+uint8_t RgbChannelAdjustment::adjustmentB(uint8_t inputB) const
+{
+	return _mappingB[inputB];
+}
+
+void RgbChannelAdjustment::initializeMapping()
+{
+	// initialize the mapping
+	for (int i = 0; i < 256; ++i)
+	{
+		int outputR = (i * _adjustR) / 255;
+    		if (outputR > 255)
+		{
+			outputR = 255;
+		}
+		_mappingR[i] = outputR;
+	}
+	for (int i = 0; i < 256; ++i)
+	{
+		int outputG = (i * _adjustG) / 255;
+		if (outputG > 255)
+		{
+			outputG = 255;
+		}
+		_mappingG[i] = outputG;
+	}
+	for (int i = 0; i < 256; ++i)
+	{
+		int outputB = (i * _adjustB) / 255;
+		if (outputB > 255)
+		{
+			outputB = 255;
+		}
+		_mappingB[i] = outputB;
+	}
+		
+
+}

src/hyperion-remote/ColorAdjustmentValues.h

@@ -0,0 +1,12 @@
+#pragma once
+
+/// Simple structure to contain the values of a color transformation
+struct ColorAdjustmentValues
+{
+	/// The value for the red color-channel
+	int valueRed;
+	/// The value for the green color-channel
+	int valueGreen;
+	/// The value for the blue color-channel
+	int valueBlue;
+};

src/hyperion-remote/CustomParameter.h

@@ -13,6 +13,7 @@
 // hyperion-remote includes
 #include "ColorTransformValues.h"
 #include "ColorCorrectionValues.h"
+#include "ColorAdjustmentValues.h"
 
 /// Data parameter for a color
 typedef vlofgren::PODParameter<std::vector<QColor>> ColorParameter;
@@ -26,6 +27,9 @@ typedef vlofgren::PODParameter<ColorTransformValues> TransformParameter;
 /// Data parameter for color correction values (list of three values)
 typedef vlofgren::PODParameter<ColorCorrectionValues> CorrectionParameter;
 
+/// Data parameter for color correction values (list of three values)
+typedef vlofgren::PODParameter<ColorAdjustmentValues> AdjustmentParameter;
+
 namespace vlofgren {
 	///
 	/// Translates a string (as passed on the commandline) to a vector of colors
@@ -161,4 +165,33 @@ namespace vlofgren {
 
 		return correction;
 	}
+	
+	template<>
+	ColorAdjustmentValues AdjustmentParameter::validate(const std::string& s) throw (Parameter::ParameterRejected)
+	{
+		ColorAdjustmentValues adjustment;
+
+		// s should be split in 3 parts
+		// seperators are either a ',' or a space
+		QStringList components = QString(s.c_str()).split(" ", QString::SkipEmptyParts);
+
+		if (components.size() == 3)
+		{
+			bool ok1, ok2, ok3;
+			adjustment.valueRed   = components[0].toInt(&ok1);
+			adjustment.valueGreen = components[1].toInt(&ok2);
+			adjustment.valueBlue  = components[2].toInt(&ok3);
+
+			if (ok1 && ok2 && ok3)
+			{
+				return adjustment;
+			}
+		}
+
+		std::stringstream errorMessage;
+		errorMessage << "Argument " << s << " can not be parsed to 3 integer values";
+		throw Parameter::ParameterRejected(errorMessage.str());
+
+		return adjustment;
+	}
 }

src/hyperion-remote/JsonConnection.cpp

@@ -322,6 +322,51 @@ void JsonConnection::setTemperature(std::string * temperatureId, ColorCorrection
 	parseReply(reply);
 }
 
+void JsonConnection::setAdjustment(std::string * adjustmentId, ColorAdjustmentValues * redAdjustment, ColorAdjustmentValues * greenAdjustment, ColorAdjustmentValues * blueAdjustment)
+{
+	std::cout << "Set color adjustments" << std::endl;
+
+	// create command
+	Json::Value command;
+	command["command"] = "adjustment";
+	Json::Value & adjust = command["adjustment"];
+
+	if (adjustmentId != nullptr)
+	{
+		adjust["id"] = *adjustmentId;
+	}
+	
+	if (redAdjustment != nullptr)
+	{
+		Json::Value & v = adjust["redAdjust"];
+		v.append(redAdjustment->valueRed);
+		v.append(redAdjustment->valueGreen);
+		v.append(redAdjustment->valueBlue);
+	}
+
+	if (greenAdjustment != nullptr)
+	{
+		Json::Value & v = adjust["greenAdjust"];
+		v.append(greenAdjustment->valueRed);
+		v.append(greenAdjustment->valueGreen);
+		v.append(greenAdjustment->valueBlue);
+	}
+
+	if (blueAdjustment != nullptr)
+	{
+		Json::Value & v = adjust["blueAdjust"];
+		v.append(blueAdjustment->valueRed);
+		v.append(blueAdjustment->valueGreen);
+		v.append(blueAdjustment->valueBlue);
+	}
+
+	// send command message
+	Json::Value reply = sendMessage(command);
+
+	// parse reply message
+	parseReply(reply);
+}
+
 Json::Value JsonConnection::sendMessage(const Json::Value & message)
 {
 	// serialize message (FastWriter already appends a newline)

src/hyperion-remote/JsonConnection.h

@@ -15,6 +15,7 @@
 // hyperion-remote includes
 #include "ColorTransformValues.h"
 #include "ColorCorrectionValues.h"
+#include "ColorAdjustmentValues.h"
 
 ///
 /// Connection class to setup an connection to the hyperion server and execute commands
@@ -130,6 +131,21 @@ public:
 			std::string * temperatureId,
 			ColorCorrectionValues * temperature);
 
+	///
+	/// Set the color adjustment of the leds
+	///
+	/// @note Note that providing a NULL will leave the settings on the server unchanged
+	///
+	/// @param adjustmentId The identifier of the correction to set
+	/// @param redAdjustment The red channel adjustment values
+	/// @param greenAdjustment The green channel adjustment values
+	/// @param blueAdjustment The blue channel adjustment values
+	void setAdjustment(
+			std::string * adjustmentId,
+			ColorAdjustmentValues * redAdjustment,
+			ColorAdjustmentValues * greenAdjustment,
+			ColorAdjustmentValues * blueAdjustment);
+
 private:
 	///
 	/// Send a json command message and receive its reply

src/hyperion-remote/hyperion-remote.cpp

@@ -63,24 +63,28 @@ int main(int argc, char * argv[])
 		ImageParameter     & argImage      = parameters.add<ImageParameter>    ('i', "image"     , "Set the leds to the colors according to the given image file");
         	StringParameter    & argEffect     = parameters.add<StringParameter>   ('e', "effect"    , "Enable the effect with the given name");
 		StringParameter    & argEffectArgs = parameters.add<StringParameter>   (0x0, "effectArgs", "Arguments to use in combination with the specified effect. Should be a Json object string.");
-		SwitchParameter<>  & argServerInfo = parameters.add<SwitchParameter<> >('l', "list"      , "List server info");
+		SwitchParameter<>  & argServerInfo = parameters.add<SwitchParameter<> >('l', "list"      , "List server info and active effects with priority and duration");
 		SwitchParameter<>  & argClear      = parameters.add<SwitchParameter<> >('x', "clear"     , "Clear data for the priority channel provided by the -p option");
 		SwitchParameter<>  & argClearAll   = parameters.add<SwitchParameter<> >(0x0, "clearall"  , "Clear data for all active priority channels");
 		StringParameter    & argId         = parameters.add<StringParameter>   ('q', "qualifier" , "Identifier(qualifier) of the transform to set");
-		DoubleParameter    & argSaturation = parameters.add<DoubleParameter>   ('s', "saturation", "Set the HSV saturation gain of the leds");
+		DoubleParameter    & argSaturation = parameters.add<DoubleParameter>   ('s', "saturation", "!DEPRECATED! Will be removed soon! Set the HSV saturation gain of the leds");
-		DoubleParameter    & argValue      = parameters.add<DoubleParameter>   ('v', "value"     , "Set the HSV value gain of the leds");
+		DoubleParameter    & argValue      = parameters.add<DoubleParameter>   ('v', "value"     , "!DEPRECATED! Will be removed soon! Set the HSV value gain of the leds");
 		DoubleParameter    & argSaturationL = parameters.add<DoubleParameter>  ('u', "saturationL", "Set the HSL saturation gain of the leds");
 		DoubleParameter    & argLuminance  = parameters.add<DoubleParameter>   ('m', "luminance" , "Set the HSL luminance gain of the leds");
 		TransformParameter & argGamma      = parameters.add<TransformParameter>('g', "gamma"     , "Set the gamma of the leds (requires 3 space seperated values)");
 		TransformParameter & argThreshold  = parameters.add<TransformParameter>('t', "threshold" , "Set the threshold of the leds (requires 3 space seperated values between 0.0 and 1.0)");
-		TransformParameter & argBlacklevel = parameters.add<TransformParameter>('b', "blacklevel", "Set the blacklevel of the leds (requires 3 space seperated values which are normally between 0.0 and 1.0)");
+		TransformParameter & argBlacklevel = parameters.add<TransformParameter>('b', "blacklevel", "!DEPRECATED! Will be removed soon! Set the blacklevel of the leds (requires 3 space seperated values which are normally between 0.0 and 1.0)");
-		TransformParameter & argWhitelevel = parameters.add<TransformParameter>('w', "whitelevel", "Set the whitelevel of the leds (requires 3 space seperated values which are normally between 0.0 and 1.0)");
+		TransformParameter & argWhitelevel = parameters.add<TransformParameter>('w', "whitelevel", "!DEPRECATED! Will be removed soon! Set the whitelevel of the leds (requires 3 space seperated values which are normally between 0.0 and 1.0)");
 		SwitchParameter<>  & argPrint      = parameters.add<SwitchParameter<> >(0x0, "print"     , "Print the json input and output messages on stdout");
 		SwitchParameter<>  & argHelp       = parameters.add<SwitchParameter<> >('h', "help"      , "Show this help message and exit");
-		StringParameter    & argIdC        = parameters.add<StringParameter>   ('y', "qualifier" , "Identifier(qualifier) of the correction to set");
+		StringParameter    & argIdC        = parameters.add<StringParameter>   ('y', "qualifier" , "!DEPRECATED! Will be removed soon! Identifier(qualifier) of the correction to set");
-		CorrectionParameter & argCorrection  = parameters.add<CorrectionParameter>('Y', "correction" , "Set the correction of the leds (requires 3 space seperated values between 0 and 255)");
+		CorrectionParameter & argCorrection  = parameters.add<CorrectionParameter>('Y', "correction" , "!DEPRECATED! Will be removed soon! Set the correction of the leds (requires 3 space seperated values between 0 and 255)");
 		StringParameter    & argIdT        = parameters.add<StringParameter>   ('z', "qualifier" , "Identifier(qualifier) of the temperature correction to set");
 		CorrectionParameter & argTemperature  = parameters.add<CorrectionParameter>('Z', "temperature" , "Set the temperature correction of the leds (requires 3 space seperated values between 0 and 255)");
+		StringParameter    & argIdA         = parameters.add<StringParameter>   ('j', "qualifier" , "Identifier(qualifier) of the adjustment to set");
+		AdjustmentParameter & argRAdjust = parameters.add<AdjustmentParameter>('R', "redAdjustment" , "Set the adjustment of the red color (requires 3 space seperated values between 0 and 255)");
+		AdjustmentParameter & argGAdjust = parameters.add<AdjustmentParameter>('G', "greenAdjustment", "Set the adjustment of the green color (requires 3 space seperated values between 0 and 255)");
+		AdjustmentParameter & argBAdjust = parameters.add<AdjustmentParameter>('B', "blueAdjustment", "Set the adjustment of the blue color (requires 3 space seperated values between 0 and 255)");
 
 		// set the default values
 		argAddress.setDefault(defaultServerAddress.toStdString());
@@ -100,7 +104,8 @@ int main(int argc, char * argv[])
 
 		// check if at least one of the available color transforms is set
 		bool colorTransform = argSaturation.isSet() || argValue.isSet() || argSaturationL.isSet() || argLuminance.isSet() || argThreshold.isSet() || argGamma.isSet() || argBlacklevel.isSet() || argWhitelevel.isSet();
-		bool colorModding = colorTransform || argCorrection.isSet() || argTemperature.isSet();
+		bool colorAdjust = argRAdjust.isSet() || argGAdjust.isSet() || argBAdjust.isSet();
+		bool colorModding = colorTransform || colorAdjust || argCorrection.isSet() || argTemperature.isSet();
 		
 		// check that exactly one command was given
         int commandCount = count({argColor.isSet(), argImage.isSet(), argEffect.isSet(), argServerInfo.isSet(), argClear.isSet(), argClearAll.isSet(), colorModding});
@@ -127,6 +132,10 @@ int main(int argc, char * argv[])
 			std::cerr << "  " << argCorrection.usageLine() << std::endl;
 			std::cerr << "  " << argIdT.usageLine() << std::endl;
 			std::cerr << "  " << argTemperature.usageLine() << std::endl;
+			std::cerr << "  " << argIdA.usageLine() << std::endl;
+			std::cerr << "  " << argRAdjust.usageLine() << std::endl;
+			std::cerr << "  " << argGAdjust.usageLine() << std::endl;
+			std::cerr << "  " << argBAdjust.usageLine() << std::endl;
 			return 1;
 		}
 
@@ -186,6 +195,24 @@ int main(int argc, char * argv[])
 						argIdT.isSet()		? &tempId : nullptr,
 						argTemperature.isSet()  ? &temperature  : nullptr);
 			}
+			
+			if (colorAdjust)
+			{
+				std::string adjustId;
+				ColorAdjustmentValues redChannel, greenChannel, blueChannel;
+
+				if (argIdA.isSet())			adjustId    = argIdA.getValue();
+				if (argRAdjust.isSet())  	redChannel  = argRAdjust.getValue();
+				if (argGAdjust.isSet())		greenChannel = argGAdjust.getValue();
+				if (argBAdjust.isSet()) 	blueChannel = argBAdjust.getValue();
+			
+				connection.setAdjustment(
+						argIdA.isSet()		? &adjustId    : nullptr,
+						argRAdjust.isSet()	? &redChannel  : nullptr,
+						argGAdjust.isSet()	? &greenChannel : nullptr,
+						argBAdjust.isSet()	? &blueChannel : nullptr);		
+				
+			}
 			if (colorTransform)
 			{
 				std::string transId;