* WLED - Fix empty segment element in DB
* WLED - Fix to not overwrite on state when not isStayOnAfterStreaming
* Refactor ProviderRestApi, increase default timeout
* Fix Smoothing - Fix empty updates, consider smoothing configs for effects
* UI - Fix not removed priority
* Add missing header and code updates
* setRedirectPolicy was only introduced in Qt 5.9
* Adalight - Align to HyperSerial v9.0.0
* HyperSerial Hyperion with awa protocol v8.0.0
* Correct line-endings
* WLED segment streaming support
* Address CodeQL findings
* WLED - Remove that interim color is shown when WLED is powered off
* Allow LEDDevice to stay on after streaming
* Apply stayOn on segment streamed to
* Fix LED-Matrix Layout: Add Cabling direction selection element again
* Smoothing Remove ouputrate as duplicate to update frequency
* Serial LDEDDevices -Increase writeBlack to overcome issues on high baud rates
* Serial LED-Devices - Support device feedback, show statistics provided by HyperSerial
* Fix - Update Color Calibration on Remote Control when settings saved
* Serial LED-Devices - Support device feedback, show statistics provided by HyperSerial
* Fix#1430 - ensure all config and sysinfo response are there before reloading the page
* Fix printout
* fix typo
* PriorityMuxer: Remove emit out of QMutableMapIteratorion
* Test - Build aarch64
* Allow build, if no grabbers are enabled
* Align available functions to right Qt version
* Update to next development version
* Align available functions to right Qt version
* fix workflows (apt/nightly)
* Disable QNetworkConfigurationManager deprecation warnings
* Initial go on Smart Pointers
* Add Deallocation
* Correct QT_WARNING_DISABLE_DEPRECATED (available since 5.9)
* Cluster Build Variables
* Hyperion Light
* Address build warnings
* Hyperion Light - UI
* Update Protobuf to latest master
* Removed compiler warnings
* Added restart ability to systray
* Correct Protobuf
* Ignore 'no-return' warning on protobuf build
* hyperion-remote: Fix auto discovery of hyperion server
* Fix Qt version override
* Update changelog
* Remove Grabber Components, if no Grabber exists
* Standalone Grabber - Fix fps default
* Remote Control - Have Source Selction accrosswhole screen
* Enable Blackborder detection only, if relevant input sources available
* Enable Blackborder detection only, if relevant input sources available
* Remote UI - rearrange containers
* Checkout
* Fix compilation on windows
* Re-added qmdnsengine template cmake
* chrono added for linux
* Removed existing AVAHI/Bonjour, allow to enable/disable mDNS
* hyperiond macos typo fix
* Fix macOS Bundle build
* Fix macOS bundle info details
* Correct CMake files
* Removed existing AVAHI/Bonjour (2)
* Share hyperion's services via mDNS
* Add mDNS Browser and mDNS for LED-Devices
* Support mDNS discovery for standalone grabbers
* Remove ZLib Dependency & Cleanup
* mDNS - hanle 2.local2 an ".local." domains equally
* Hue - Link discovery to bridge class, workaround port 443 for mDNS discovery
* Fix save button state when switching between devices
* Removed sessions (of other hyperions)
* mDNS Publisher - Simplify service naming
* mDNS refactoring & Forwarder discovery
* mDNS Updates to use device service name
* Consistency of standalone grabbers with mDNS Service Registry
* Merge branch 'hyperion-project:master' into mDNS
* Start JSON and WebServers only after Instance 0 is available
* Remove bespoke qDebug Output again
* MDNS updates and refactor Forwarder
* Minor updates
* Upgrade to CMake 3.1
* typo
* macOS fix
* Correct merge
* - Remove dynamic linker flag from standalone dispmanX Grabber
- Added ability to use system qmdns libs
* Cec handler library will load at runtime
* typo fix
* protobuf changes
* mDNS changes for Windows/macOS
* test window build qmdnsengine
* absolute path to protobuf cmake dir
* Rework Hue Wizard supporting mDNS
* LED-Devices - Retry support + Refactoring (excl. Hue)
* LED-Devices - Refactoring/Retry support Hue + additional alignments
* Address LGTM findings
* Fix CI-Build, revert test changes
* Build Windows in Release mode to avoid python problem
* Correct that WebServerObject is available earlier
* Ensure that instance name in logs for one instance are presented
* Update content LEDs
* Rework mDNS Address lookup
* Fix LED UI
* Fix for non mDNS Services (ignore default port)
* Disbale device when now input is available
* Revert back some updates, ensure last color is updated when switched on
* Handle reopening case and changed IP, port for API-calls
* Add UPD-DDP Device
* WLED support for DDP
* Fix printout
* LEDDevice - Allow more retries, udapte defaults
* LED-Net Devices - Select Custom device, if configured
Co-authored-by: Paulchen Panther <16664240+Paulchen-Panther@users.noreply.github.com>
Co-authored-by: Paulchen Panther <Paulchen-Panter@protonmail.com>
* Stop Web-Capture when priority changes
* Remote control UI: Treat duration=0 as endless
* Stop Web-Capture on non-Image events changes
* LED Matrix Layout - Support vertical cabling direction
* Additional Yeelight models
* Treat http headers case insensitive
* Update change log
* Treat http headers case insensitive (consider Qt version)
* API - Consider provided format when setImage
* UI - Support Boblight configuration per LED instance
* Support multiple Boblight clients with different priorities
* Update changelog
* Simplify isGUI rules allowing for QT only builds
* Sysinfo: Fix indents
* LED-Devices: Show warning, if get properties failed
* Qt-Grabber: Fixed position handling of multiple monitors
* LED layout: Remove indention limitations
* Yeelight: Test YLTD003
* hyperion-remote: Provide image filename to muxer/UI
* Refactor PriorityMuxer and related
* Temp: Build under Windows 2019
* Yeelight: Remove YLTD003 as it is not working without additional changes
* Test Windows-latest with out removing redistributables/new MSVC
* correct workflows
* correct CI script
* Build Windows with Qt 5.15.2
* Priority Muxer: Updates after testing
* Fix Typo
* Update BGHandler
* QTGrabber - Reactivate windows code to avoid cursor issues
* Emit prioritiesChanged when autoselect was changed by user
Co-authored-by: Paulchen Panther <Paulchen-Panter@protonmail.com>
* Hyperion Light - Have EffectEngine as component
* Hyperion light - Build switches for LED Devices (Serial, Network)
* Fix file uri generation
* Fix missing guard for Windows
* Fix file uri generation
* Update jsonschema and checkschema
* Allow to provide cmake build args to docker build
* Razor Chroma Support - Initial version
* Address clang and lgtm findings
* Razer Fixes
* Merge branch 'master' into Razer_Chroma_Support
# Conflicts:
# assets/webconfig/i18n/en.json
# assets/webconfig/js/content_leds.js
# libsrc/leddevice/dev_net/ProviderRestApi.cpp
# libsrc/leddevice/dev_net/ProviderRestApi.h
* Corrections
* Set default config for Razer
* Simplify
* Razer - Support individual LEDs and have default layout per device type
* Differentiate between HWLEDCount and LayoutLEDCount
* Revert "Differentiate between HWLEDCount and LayoutLEDCount"
This reverts commit b147b215a5.
* Correct LGTM finding
* Disable verbose mode
* Fix that lighpack cores when lack of permissions
* Atmo/Karate - Fix LedCount constraint handling
* Hue updates - Have EntertainmentAPI as default, disable hardwareledcount as cacultated
* Have Gamma per default 2.2
* Revert Refactor/Optimization of PR1312
* LED Layout - Only update preview image when visible
* Revert Debug updates
* Correct Refactor/Optimization of PR1312
* LedSim: Do not stream LED data when not required, LedS-im/Layout: Sync on video streaming
* Remove initial switch to instance 0 during API init
* SPI Fix - Free allocated memory in case of invert
* Remove development statement
* UI updates
* Minor corrections
* Tpm2net Fix - Free allocated memory
* LGTM Finding
* Add config directory and user type to SysInfo
* WS281x - Ensure that device runs with root priviliges
* WS281x - Update DMA defauls as per rpi_ws281x recommendation
* Support Sysinfo for Qt < 5.10
* Address LGTM finding
* Discover additional Nanoleaf devices
* Fix Nanoleaf not turning on
* Added LGTM configuration file
* Allow to pass QJsonObject as payload for put
* Nanoleaf - Support Restore State & Overwrite Brightness
* Removed because this is already included
Co-authored-by: Markus <16664240+Paulchen-Panther@users.noreply.github.com>
* - New Media Foundation grabber
- JsonAPI available grabber fix
- commented json config removed
* Added libjpeg-turbo to dependencies
* Fix OSX build
Removed Azure Pipelines from build scripts
* Remove Platform from Dashboard
* Correct Grabber Namings
* Grabber UI improvements, generic JSONEditor Selection Update
* Active grabber fix
* Stop Framebuffer grabber on failure
* - Image format NV12 and I420 added
- Flip mode
- Scaling factor for MJPEG
- VSCode (compile before run)
- CI (push) dependency libjpeg-turbo added
* Refactor MediaFoundation (Part 1)
* Remove QDebug output
* Added image flipping ability to MF Grabber
* fix issue 1160
* -Reload MF Grabber only once per WebUI update
- Cleanup
* Improvements
* - Set 'Software Frame Decimation' begin to 0
- Removed grabber specific device name from Log
- Keep pixel format when switching resolution
- Display 'Flip mode' correct in Log
- BGR24 images always flipped
* Refactor MediaFoundation (Part 2)
* Refactor V4L2 grabber (part 1) (#62)
* Media Foundation grabber adapted to V4L2 change
* Enable Media Foundation grabber on windows
* Have fps as int, fix height typo
* Added video standards to JsonAPI output
* Error handling in source reader improved
* Fix "Frame to small" error
* Discovery VideoSources and Dynamically Update Editor
* Hide all element when no video grabber discovered, upate naming
* Do not show unsupported grabbers
* Copy Log to Clipboard
* Update Grabber schema and Defaults
* Update access levels and validate crop ranges
* Height and width in Qt grabber corrected
* Correct formatting
* Untabify
* Global component states across instances
* Components divided on the dashboard
* refactor
* Fix Merge-issues
* Database migration aligning with updated grabber model
* Align Grabber.js with new utility functions
* Allow editor-validation for enum-lists
* Handle "Show Explainations scenario" correctly
* Grabber - Ensure save is only possible on valid content
* Dashboard update + fix GlobalSignal connection
* Ensure default database is populated with current release
* Correct grabber4L2 access level
* Display Signal detection area in preview
* Write Hyperion version into default config on compiling.
* Create defaultconfig.json dynamically
* WebUI changes
* Correct grabber config look-ups
* Refactor i18n language loading
* Fix en.json
* Split global capture from instance capture config
* Update grabber default values
* Standalone grabber: Add --debug switch
* Enhance showInputOptionsForKey for multiple keys
* Add grabber instance link to system grabber config
* Only show signal detection area, if grabber is enabled
* Always show Active element on grabber page
* Remote control - Only display gabber status, if global grabber is enabled
* WebUI optimization (thx to @mkcologne)
Start Grabber only when global settings are enabled
Fixed an issue in the WebUI preview
* V4L2/MF changes
* Jsoneditor, Correct translation for default values
* Refactor LED-Device handling in UI and make element naming consistent
* MF Discovery extended
* Fix LGTM finding
* Support Grabber Bri, Hue, Sat and Con in UI, plus their defaults
* Concider Access level for item filtering
* Concider Access level for item filtering
* Revert "Concider Access level for item filtering"
This reverts commit 5b0ce3c0f2.
* Disable fpsSoftwareDecimation for framegrabber, as not supported yet
* JSON-Editor- Add updated schema for validation on dynamic elements
* added V4L2 color IDs
* LGTM findings fix
* destroy SR callback only on exit
* Grabber.js - Hide elements not supported by platform
* Fixed freezing start effect
* Grabber UI - Hardware controls - Show current values and allow to reset to defaults
* Grabber - Discovery - Add current values to properties
* Small things
* Clean-up Effects and have ENDLESS consistently defined
* Fix on/off/on priority during startup, by initializing _prevVisComp in line with background priority
* Add missing translation mappings
* DirectX Grabber reactivated/ QT Grabber size decimation fixed
* typo in push-master workflow
* Use PreciseTimer for Grabber to ensure stable FPS timing
* Set default Screencapture rate consistently
* Fix libjpeg-turbo download
* Remove Zero character from file
* docker-compile Add PLATFORM parameter, only copy output file after successful compile
* Framebuffer, Dispmanx, OSX, AML Grabber discovery, various clean-up and consistencies across grabbers
* Fix merge problem - on docker-compile Add PLATFORM parameter, only copy output file after successful compile
* Fix definition
* OSXFRameGrabber - Revert cast
* Clean-ups nach Feedback
* Disable certain libraries when building armlogic via standard stretch image as developer
* Add CEC availability to ServerInfo to have it platform independent
* Grabber UI - Fix problem that crop values are not populated when refining editor rage
* Preserve value when updating json-editor range
* LEDVisualisation - Clear image when source changes
* Fix - Preserve value when updating json-editor range
* LEDVisualisation - Clear image when no component is active
* Allow to have password handled by Password-Manager (#1263)
* Update default signal detection area to green assuming rainbow grabber
* LED Visualisation - Handle empty priority update
* Fix yuv420 in v4l2 grabber
* V4L2-Grabber discovery - Only report grabbers with valid video input information
* Grabber - Update static variables to have them working in release build
* LED Visualisation - ClearImage when no priorities
* LED Visualisation - Fix Logo resizing issue
* LED Visualisation - Have nearly black background and negative logo
Co-authored-by: LordGrey <lordgrey.emmel@gmail.com>
Co-authored-by: LordGrey <48840279+Lord-Grey@users.noreply.github.com>
- ProviderRs232: Be more verbose about correct device in error case
Rearrange Debug Information and additionalclean-ups
- Webconfig: better error description, if Kodi is not found
* LedDevice - Address clang findings
* Fix Windows Warnings
* Ensure newInput is initialised
* Clean-up unused elements for Plaform Capture
* Fix initialization problem and spellings
* Address clang findings and spelling corrections
* LedDevice clean-ups
* Cleanups
* Align that getLedCount is int
* Have "display" as default for Grabbers
* Fix config during start-up for missing elements
* Framegrabber Clean-up - Remove non supported grabbers from selection, filter valid options
* Typo
* Framegrabber.json - Fix property numbering
* Preselect active Grabbertype
* Sort Grabbernames
* Align options with selected element
* Fix deletion of pointer to incomplete type 'BonjourBrowserWrapper'
* Address macOS compile warnings
* Have default layout = 1 LED only to avoid errors as in #673
* Address lgtm findings
* Address finding that params passed to LedDevice discovery were not considered
* Cleanups after merging with latest master
* Update Changelog
* Address lgtm findings
* Fix comment
* Test Fix
* Fix Python Warning
* Handle Dummy Device assignment correctly
* Address delete called on non-final 'commandline::Option' that has virtual functions but non-virtual destructor
* Correct that QTimer.start accepts only int
* Have Release Python GIL & reset threat state chnage downward compatible
* Correct format specifier
* LedDevice - add assertions
* Readonly DB - Fix merge issue
* Smoothing - Fix wrong defaults
* LedDevice - correct assertion
* Show smoothing config set# in debug and related values.
* Suppress error on windows, if default file is "/dev/null"
* CMAKE - Allow to define QT_BASE_DIR dynamically via environment-variable
* Ignore Visual Studio specific files
Co-authored-by: Paulchen Panther <16664240+Paulchen-Panther@users.noreply.github.com>
