* Fix that lighpack cores when lack of permissions
* Atmo/Karate - Fix LedCount constraint handling
* Hue updates - Have EntertainmentAPI as default, disable hardwareledcount as cacultated
* Have Gamma per default 2.2
* Revert Refactor/Optimization of PR1312
* LED Layout - Only update preview image when visible
* Revert Debug updates
* Correct Refactor/Optimization of PR1312
* LedSim: Do not stream LED data when not required, LedS-im/Layout: Sync on video streaming
* Remove initial switch to instance 0 during API init
* SPI Fix - Free allocated memory in case of invert
* Remove development statement
* UI updates
* Minor corrections
* Tpm2net Fix - Free allocated memory
* LGTM Finding
* Add config directory and user type to SysInfo
* WS281x - Ensure that device runs with root priviliges
* WS281x - Update DMA defauls as per rpi_ws281x recommendation
* Support Sysinfo for Qt < 5.10
* Address LGTM finding
* Discover additional Nanoleaf devices
* Fix Nanoleaf not turning on
* Added LGTM configuration file
* Allow to pass QJsonObject as payload for put
* Nanoleaf - Support Restore State & Overwrite Brightness
* Removed because this is already included
Co-authored-by: Markus <16664240+Paulchen-Panther@users.noreply.github.com>
* - New Media Foundation grabber
- JsonAPI available grabber fix
- commented json config removed
* Added libjpeg-turbo to dependencies
* Fix OSX build
Removed Azure Pipelines from build scripts
* Remove Platform from Dashboard
* Correct Grabber Namings
* Grabber UI improvements, generic JSONEditor Selection Update
* Active grabber fix
* Stop Framebuffer grabber on failure
* - Image format NV12 and I420 added
- Flip mode
- Scaling factor for MJPEG
- VSCode (compile before run)
- CI (push) dependency libjpeg-turbo added
* Refactor MediaFoundation (Part 1)
* Remove QDebug output
* Added image flipping ability to MF Grabber
* fix issue 1160
* -Reload MF Grabber only once per WebUI update
- Cleanup
* Improvements
* - Set 'Software Frame Decimation' begin to 0
- Removed grabber specific device name from Log
- Keep pixel format when switching resolution
- Display 'Flip mode' correct in Log
- BGR24 images always flipped
* Refactor MediaFoundation (Part 2)
* Refactor V4L2 grabber (part 1) (#62)
* Media Foundation grabber adapted to V4L2 change
* Enable Media Foundation grabber on windows
* Have fps as int, fix height typo
* Added video standards to JsonAPI output
* Error handling in source reader improved
* Fix "Frame to small" error
* Discovery VideoSources and Dynamically Update Editor
* Hide all element when no video grabber discovered, upate naming
* Do not show unsupported grabbers
* Copy Log to Clipboard
* Update Grabber schema and Defaults
* Update access levels and validate crop ranges
* Height and width in Qt grabber corrected
* Correct formatting
* Untabify
* Global component states across instances
* Components divided on the dashboard
* refactor
* Fix Merge-issues
* Database migration aligning with updated grabber model
* Align Grabber.js with new utility functions
* Allow editor-validation for enum-lists
* Handle "Show Explainations scenario" correctly
* Grabber - Ensure save is only possible on valid content
* Dashboard update + fix GlobalSignal connection
* Ensure default database is populated with current release
* Correct grabber4L2 access level
* Display Signal detection area in preview
* Write Hyperion version into default config on compiling.
* Create defaultconfig.json dynamically
* WebUI changes
* Correct grabber config look-ups
* Refactor i18n language loading
* Fix en.json
* Split global capture from instance capture config
* Update grabber default values
* Standalone grabber: Add --debug switch
* Enhance showInputOptionsForKey for multiple keys
* Add grabber instance link to system grabber config
* Only show signal detection area, if grabber is enabled
* Always show Active element on grabber page
* Remote control - Only display gabber status, if global grabber is enabled
* WebUI optimization (thx to @mkcologne)
Start Grabber only when global settings are enabled
Fixed an issue in the WebUI preview
* V4L2/MF changes
* Jsoneditor, Correct translation for default values
* Refactor LED-Device handling in UI and make element naming consistent
* MF Discovery extended
* Fix LGTM finding
* Support Grabber Bri, Hue, Sat and Con in UI, plus their defaults
* Concider Access level for item filtering
* Concider Access level for item filtering
* Revert "Concider Access level for item filtering"
This reverts commit 5b0ce3c0f2.
* Disable fpsSoftwareDecimation for framegrabber, as not supported yet
* JSON-Editor- Add updated schema for validation on dynamic elements
* added V4L2 color IDs
* LGTM findings fix
* destroy SR callback only on exit
* Grabber.js - Hide elements not supported by platform
* Fixed freezing start effect
* Grabber UI - Hardware controls - Show current values and allow to reset to defaults
* Grabber - Discovery - Add current values to properties
* Small things
* Clean-up Effects and have ENDLESS consistently defined
* Fix on/off/on priority during startup, by initializing _prevVisComp in line with background priority
* Add missing translation mappings
* DirectX Grabber reactivated/ QT Grabber size decimation fixed
* typo in push-master workflow
* Use PreciseTimer for Grabber to ensure stable FPS timing
* Set default Screencapture rate consistently
* Fix libjpeg-turbo download
* Remove Zero character from file
* docker-compile Add PLATFORM parameter, only copy output file after successful compile
* Framebuffer, Dispmanx, OSX, AML Grabber discovery, various clean-up and consistencies across grabbers
* Fix merge problem - on docker-compile Add PLATFORM parameter, only copy output file after successful compile
* Fix definition
* OSXFRameGrabber - Revert cast
* Clean-ups nach Feedback
* Disable certain libraries when building armlogic via standard stretch image as developer
* Add CEC availability to ServerInfo to have it platform independent
* Grabber UI - Fix problem that crop values are not populated when refining editor rage
* Preserve value when updating json-editor range
* LEDVisualisation - Clear image when source changes
* Fix - Preserve value when updating json-editor range
* LEDVisualisation - Clear image when no component is active
* Allow to have password handled by Password-Manager (#1263)
* Update default signal detection area to green assuming rainbow grabber
* LED Visualisation - Handle empty priority update
* Fix yuv420 in v4l2 grabber
* V4L2-Grabber discovery - Only report grabbers with valid video input information
* Grabber - Update static variables to have them working in release build
* LED Visualisation - ClearImage when no priorities
* LED Visualisation - Fix Logo resizing issue
* LED Visualisation - Have nearly black background and negative logo
Co-authored-by: LordGrey <lordgrey.emmel@gmail.com>
Co-authored-by: LordGrey <48840279+Lord-Grey@users.noreply.github.com>
- ProviderRs232: Be more verbose about correct device in error case
Rearrange Debug Information and additionalclean-ups
- Webconfig: better error description, if Kodi is not found
* LedDevice - Address clang findings
* Fix Windows Warnings
* Ensure newInput is initialised
* Clean-up unused elements for Plaform Capture
* Fix initialization problem and spellings
* Address clang findings and spelling corrections
* LedDevice clean-ups
* Cleanups
* Align that getLedCount is int
* Have "display" as default for Grabbers
* Fix config during start-up for missing elements
* Framegrabber Clean-up - Remove non supported grabbers from selection, filter valid options
* Typo
* Framegrabber.json - Fix property numbering
* Preselect active Grabbertype
* Sort Grabbernames
* Align options with selected element
* Fix deletion of pointer to incomplete type 'BonjourBrowserWrapper'
* Address macOS compile warnings
* Have default layout = 1 LED only to avoid errors as in #673
* Address lgtm findings
* Address finding that params passed to LedDevice discovery were not considered
* Cleanups after merging with latest master
* Update Changelog
* Address lgtm findings
* Fix comment
* Test Fix
* Fix Python Warning
* Handle Dummy Device assignment correctly
* Address delete called on non-final 'commandline::Option' that has virtual functions but non-virtual destructor
* Correct that QTimer.start accepts only int
* Have Release Python GIL & reset threat state chnage downward compatible
* Correct format specifier
* LedDevice - add assertions
* Readonly DB - Fix merge issue
* Smoothing - Fix wrong defaults
* LedDevice - correct assertion
* Show smoothing config set# in debug and related values.
* Suppress error on windows, if default file is "/dev/null"
* CMAKE - Allow to define QT_BASE_DIR dynamically via environment-variable
* Ignore Visual Studio specific files
Co-authored-by: Paulchen Panther <16664240+Paulchen-Panther@users.noreply.github.com>
* Save BLACK as lastLedColor during writeBlack
* Remove debug statement overhead
* Re-Add typecasting to ensure readable output
* Revert "New language support: Russian and Chinese (simplified)"
This reverts commit 5c95fab894.
* Ignore TemporaryError
* Switch Off devices, when no input source
* Realign Enable/SwitchOn, Disable/SwitchOff
* Align to updated LedDevice-Flow
* Remove debug statements slipped in
* Send last color update after enabling again
* Fix WLED getProperties API call
* Remove unused signals
* LedDevice process flow documentation
* LedDevice process flow documentation
Co-authored-by: Paulchen Panther <16664240+Paulchen-Panther@users.noreply.github.com>
* Refactor LedDevices - Initial version
* Small renamings
* Add WLED as own device
* Lpd8806 Remove open() method
* remove dependency on Qt 5.10
* Lpd8806 Remove open() method
* Update WS281x
* Update WS2812SPI
* Add writeBlack for WLED powerOff
* WLED remove extra bracket
* Allow different Nanoleaf panel numbering sequence (Feature req.#827)
* build(deps): bump websocket-extensions from 0.1.3 to 0.1.4 in /docs (#826)
* Bumps [websocket-extensions](https://github.com/faye/websocket-extensions-node) from 0.1.3 to 0.1.4.
- [Release notes](https://github.com/faye/websocket-extensions-node/releases)
- [Changelog](https://github.com/faye/websocket-extensions-node/blob/master/CHANGELOG.md)
- [Commits](https://github.com/faye/websocket-extensions-node/compare/0.1.3...0.1.4)
* Fix typos
* Nanoleaf clean-up
* Yeelight support, generalize wizard elements
* Update Yeelight to handle quota in music mode
* Yeelight extend rage for extraTimeDarkness for testing
* Clean-up - Add commentary, Remove development debug statements
* Fix brightnessSwitchOffOnMinimum typo and default value
* Yeelight support restoreOriginalState, additional Fixes
* WLED - Remove UDP-Port, as it is not configurable
* Fix merging issue
* Remove QHostAddress::operator=(const QString&)' is deprecated
* Windows compile errors and (Qt 5.15 deprecation) warnings
* Fix order includes
* LedDeviceFile Support Qt5.7 and greater
* Windows compatibility and other Fixes
* Fix Qt Version compatability
* Rs232 - Resolve portname from unix /dev/ style, fix DMX sub-type support
* Disable WLED Wizard Button (until Wizard is available)
* Yeelight updates
* Add wrong log-type as per #505
* Fixes and Clean-up after clang-tidy report
* Fix udpe131 not enabled for generated CID
* Change timer into dynamic for Qt Thread-Affinity
* Hue clean-up and diyHue workaround
* Updates after review feedback by m-seker
* Add "chrono" includes
