* Handle Exceptions in main & Pythoninit
* Have SSDPDiscover generic again
* Have SSDPDiscover generic again
* Change Info- to Debug logs as technical service messages
* Nanoleaf - When switched on, ensure UDP mode
* Include SQL Database in Cross-Compile instructions
* Fix Clazy (QT code checker) and clang Warnings
* Stop LedDevice:write for disabled device
* Nanoleaf: Fix uint printfs
* NanoLeaf: Fix indents to tabs
* NanoLeaf - Add debug verbosity switches
* Device switchability support, FileDevice with timestamp support
* Nanoleaf Light Panels now support External Control V2
* Enhance LedDeviceFile by Timestamp + fix readyness
* Stop color stream, if LedDevice disabled
* Nanoleaf - remove switchability
* Fix MultiColorAdjustment, if led-range is greater lednum
* Fix logging
* LedFileDevice/LedDevice - add testing support
* New "Led Test" effect
* LedDeviceFile - Add chrono include + Allow Led rewrites for testing
* Stabilize Effects for LedDevices where latchtime = 0
* Update LedDeviceFile, allow latchtime = 0
* Distangle LinearColorSmoothing and LEDDevice, Fix Effect configuration updates
* Updates LedDeviceFile - Initialize via Open
* Updates LedDeviceNanoleaf - Initialize via Open, Remove throwing exceptions
* Updates ProviderUDP - Remove throwing exceptions
* Framebuffer - Use precise timer
* TestSpi - Align to LedDevice updates
* Pretty Print CrossCompileHowTo as markdown-file
* Ensure that output is only written when LedDevice is ready
* Align APA102 Device to new device staging
* Logger - Remove clang warnings on extra semicolon
* Devices SPI - Align to Device stages and methods
* Fix cppcheck and clang findings
* Add Code-Template for new Devices
* Align devices to stages and methods, clean-up some code
* Allow to reopen LedDevice without restart
* Revert change "Remove Connect (PriorityMuxer::visiblePriorityChanged -> Hyperion::update) due to double writes"
* Remove visiblePriorityChanged from LedDevice to decouple LedDevice from hyperion logic
* Expose LedDevice getLedCount and align signedness
Set interuption flag to running effects when hyperion emits finished signal
Protobuffer, Flatbuffer and Boblight connection priority check to avoid unwanted program behavior
Signed-off-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
- Build problems:
- Qt 5.13 obsoleted some calls that were used in our Qt library.
- The PhilipsHueLight and PhilipsHueBridge classes did not use the private logger class
- Undo changes:
- In Commit e6c2e7e, I made changes that were not covered. An apology goes to @b1rdhous3
Signed-off-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
- Increases linker performance under Linux builds by using Gold linker, if available
- ccache is used if available
- removed statistic class (Stats.cpp) from project due to the missing result (sorry @Brindosch)
- add LGTM bandges for code analysis overview
Signed-off-by: Paulchen-Panther <Paulchen-Panter@protonmail.com>
* Add new Effects
* add schema file for gif based effects
* add background color to snake effect
* add background color to snake effect
* Update schema file for snake effect
* Add function getImage
* add function getImage
* optimize lights.gif
* Add format to GIF schema
* implement set videomode via json api
* refactor grabbers:
- new base class
- move shared code to base class
* fix osx
* rework all cmakelist files with auto file collection. except leddevices (need further restructuring)
* store current video and grabbing mode
* add json stuff
* remove grabbingmode - we do not want to expose it
* add dynamic smoothing first step
* extend prio muxer to hold smoothing preset id
* add icons for systray
* fix missing changes in prio muxer
* implement specific smoothing params for effects
* refactoring: std::min/max to qMin/Max
* some code optimization
* fix schema and translation
* revoke change of python include order
* fix eol in effect shemas
* optimize random,candle and fadecandy json schemas
* update
* resolve qt5w
* test
* Go down
cmake python search won the price for crazy lib searches!
* 2.7 python forced, RPATH
* upstream
* ...
* update
* ...
* 2.7.12 py it picks random versions...
* max 7.12.5....
* Test 14.04 tests
* revoke schema split
* add "getAutoCorrectedConfig" function
* revoke schema split
* revoke schema split
* revoke schema split
* Prevent compiler error if none grabber is available
* revoke schema split
* add "getAutoCorrectedConfig" function
* revoke schema split
* remove "configMigrator"
* remove "configMigrator"
* Change TestConfigFile to show how the autocorrection works
* revoke schema split
* revoke schema split
* remove "ConfigMigrator"
* remove "ConfigMigrator"
* remove "ConfigMigratorBase"
* remove "ConfigMigratorBase"
* Add QJsonUtils.h
* added ability "ignore-required"
It has been added the ability to correct the configuration without having to pay attention to the keyword "required" in the hyperion schema
* Allow Comments in Hyperion Schema
* add ability to ignore the "required" keyword in hyperion schema
* add ability to ignore the "required" keyword in hyperion schema
* add ability to ignore the "required" keyword in hyperion schema
* //Allow Comments in Hyperion Schema
* Update jsonschema.py to version 0.8.0 to support ...
references in json schema
* add RefResolver from jsonschema.py to resolve
references in hyperion schema
* remove dupe code
* split the hyperion schema in separatly files
For better readability
* add function "resolveReferences" to resolve
references in hyperion schema.
* remove CURRENT_CONFIG_VERSION
* remove CURRENT_CONFIG_VERSION
* split the hyperion schema in separatly files
For better readability
* Create schema-backgroundEffect.json
* Add the rest of the Hyperion schema via upload
* Remove Comments in config file
* Add return variable to function writeJson().
fix function resolveReferences().
edit function load() to handle QPair result from schemaChecker.
* edit function validate() to return QPair variable
* fit function loadEffectDefinition()
* fit function checkJson()
* Expand error check by dividing
"_error" variable in "_error" and "_schemaError".
Replace variable "bool" in validate() in QPair
* Extend function "cmd_cfg_set" to handle auto correction
* Extend function "loadConfig" to handle auto correction
* fix function loadConfig()
* add limit for write to leddevice
* add to default config
* add i18n
* extend xmas effect
* fix indention
* add check for minimum brightness
* adapt effects to fading and new minWriteTime
* remove old latchTime
rename minimumWriteTime to latchTime
make it as dev specific option
* set default for rewriteTime to 1s
pause smoothing on color too
* reenable smoothing for color - it looks nicer :-)
* fix timeout timer
* std::string -> qstring part 1
* more string migration
* more string migration ...
* ...
* more qstring mogrations
add sysinfo via json
* remove unneccessary includes
* integrate sysinfo into webui
* implement rigin for efx
* implement origin for effects and other components
add experimental adalight firmware for arduino with upto 5 pwm channels
* cleanup
* origin ip now with dns lookup
* fix compile
* move some code
* - add more drawing func to effect engine
- make provider rs232 less noisy
- json checks: remove utf8 conversion temporarly and make it compat with py3 again
* fix compile prob
* Update EffectEngine.h
* add reloadEffects function
* add readEffects function
* add reloadEffects function
* Call reloadEffects after handleCreateEffectCommand and handleDeleteEffectCommand
* Add ability to delete custom created Effects
* Add deleteEffect function to Hyperion-Remote
* Add deleteEffect function to Hyperion-Remote
* Update schema.json
* Update JsonSchemas.qrc
* Add schema-delete-effect.json
* Add deleteEffect function to JSON RPC
* Add deleteEffect function to JSON RPC
* Add Effect configuration file (.json) to Effect Definition
* Update EffectDefinition.h
* remove color temperatire, its the same as color adjustment
* remove temperature from schema
* implement most part of v4l only colro settings,
now hyperion update knows from which component the colors come
* update configs
* fix webui config write
* reomve correction and temperature from hyperion-remote
* extend image effects
add a basic light clock
* add alpha values to rainbow
* some effect tuning
* make seconds hand optional and change color to yellow
make blue hours hand always visible
* - effects now can use qt image effects
- rainbow swirtl is now suitable for any led layout - including matrix
* fix rainbow effect
* effect: add radialGradient
* fix some js errors
* optimize code
* try fix travis test not working as expected
* fix default config files
* fix config
* implement effects included in hyperiond binary
* cleanup
* remove install of effects dir. People who wants to develop effects has to copy them from github
effect params for initial effects can be changed in config permanently and other effect params can be changed
via json (currently only temporarily)
* fix schema of fadecandy
webui fix display of specific led options
* add leddevice write support
* cleanup
* webui: tune hue code
* when use json effect definition from putsiede hyperiond but want to use py script from inside hyperiond use ad a :
e.g. fade.py needs a fade.py near the json file, but :fade.py is taken from resource inside hyperiond
* add ability to di
* add abiloty to diable effcts via hyperion config
* use effect name instead of script in active effects and prio register
* finally solve open file handle during effect is playing. Now script is read before, then file closed and then t is run by python
* fix some webui things
- led config tabs
- inital loading screen
optimize qrc file generation
fix compile warning in hyperion.cpp
* cleanup
* more cleanup
* make hyperion websocket api event based
* implement new websocket handling for generalconf
* migrate all webui stuff to new event based websocket api
some cleanup ... now all html templates are in content
refactoring of web stuff
* add hyperionport to global
start impl. removing advanced key
* separate dashboard
serverinfo is updated every 3 seconds automatily
add input selection
cleanup and remove not needed stuff
* prepare infrastructure for server sided file execution
* webui minor fixes
* fix compile
* start ledclone
* led cloning: clone scan areas from original led
main: show exceptions, better exit
* tune json schema for new option. somwe cleanup
* fix warnings and bug for framebuffer selection. thx to clang brought by new osx buikld on travis
* make ledclone feature work flawlessly for effects too. Effect sees the ledstring without cloned leds.
cloned leds will be inserted just before sending to leddevice
additional: remove warnings and fix code style
* fix warning
