Commit Graph

74 Commits

Author SHA1 Message Date
redPanther
197af35de0 Clone single led color from other led (#157)
* start ledclone

* led cloning: clone scan areas from original led
main: show exceptions, better exit

* tune json schema for new option. somwe cleanup

* fix warnings and bug for framebuffer selection. thx to clang brought by new osx buikld on travis

* make ledclone feature work flawlessly for effects too. Effect sees the ledstring without cloned leds.
cloned leds will be inserted just before sending to leddevice

additional: remove warnings and fix code style

* fix warning
2016-08-08 00:17:00 +02:00
redPanther
30b9c20611 new frame grabber handling (#137)
* - implement framegrabber type option
- framegrabber autoselect
- integrate x11 grabber in hyperiond

* add doxy

* v4l: select device by name
hyperiond: fix x11 grabber connection to kodichecker
config: tune default prios of boblight and v4l

* make v4l name finding case insensitive
2016-07-24 15:18:34 +02:00
redPanther
946f9fc603 compile fix (#114)
* multi fix commit

- refactoring leddevicefactory
- adalight: default for "delayAfterConnect" is 1s now - needed for most arduino's because of there special behaviour on open
- fadecandy: new option for disabling configuration send - if you want to keep your fadecandy defaults
- Hyperion.cpp: simplify createSmoothing discussed in #105
- smoothing:
-- add option for continuous output
-- when updatedelay>0 and continousOutput is disabled, buffer is flushed correctly after no input is detected

* add doxygen to travis

* fix code

* fix compile fir ws281x pwm

* remove git merge stuff

* fix compile
2016-07-13 16:19:19 +02:00
redPanther
5a2ef6c4a3 multi fix commit (#112)
* multi fix commit

- refactoring leddevicefactory
- adalight: default for "delayAfterConnect" is 1s now - needed for most arduino's because of there special behaviour on open
- fadecandy: new option for disabling configuration send - if you want to keep your fadecandy defaults
- Hyperion.cpp: simplify createSmoothing discussed in #105
- smoothing:
-- add option for continuous output
-- when updatedelay>0 and continousOutput is disabled, buffer is flushed correctly after no input is detected

* add doxygen to travis
2016-07-13 11:18:12 +02:00
redPanther
48d20529d3 extend Fadecandy driver (#109)
* add functions to send sysEx (not working correctly atm)

* make new values avail via config
2016-07-12 22:37:45 +02:00
penfold42
d4635bba4e Sk6812rgbwfix (#95)
* sk6812rgbw bug fix and rename device to sk6812rgbw-spi

* Added white_algorithm support to sk6812rgbw-spi device type
2016-07-10 17:07:19 +02:00
redPanther
36b4d072c5 common ledbuffer for color transform (#77)
* common ledbuffer for color transform

hyperion class uses a common buffer for all operations on ledColors got from muxer
all color transforms uses new ledBuffer instead of making copies of ledbuffer

other fixes:
fix compile bug in profiler
update doxygen config

* migrate logging for color transform classes

* prepare new logger in hyperion class

* implement hwledcount

* Update Hyperion.cpp

Fix off color

* remove ledscount equivalent from apa102
migrate logging in hyperion.cpp
remove unused and duuplicate colorcorrection - but same is available through tempertature

* remove colorcorrection completly
fix compile

* set colororder back to static

* in remote: using correction is the same as using temperature - correction is obsolete, command not delete atm for compat reasons
2016-07-01 23:20:41 +02:00
penfold42
faf5110558 More logging migration. (#74)
Cleaned up old commented out printf statements.

The piblaster stuff probably needs to be moved out of the devicefactory but Ill have to do that later
2016-06-29 16:49:05 +02:00
penfold42
96037da1cf Added support for sk6812RGBW leds (ab)using the SPI interface. (#61)
right now it only uses RGB - white is set to zero
2016-06-27 22:43:35 +02:00
redPanther
4033de85ec Logging leds (#50)
* switch to new logger for folowing led devices:
LedDeviceAtmo
LedDeviceFactory
LedDeviceFadeCandy
LedDeviceHyperionUsbasp
LedDeviceLightpack-hidapi
LedDevicePiBlaster
LedDeviceWS281x
LedRs232Device

leddevice base class defines logger already as protected member _log

* migrate to new logger for led devices.
still todo:
LedDeviceWS2812b
LedDeviceWs2812SPI
LedDeviceTinkerforge
LedDeviceLightpack
LedDeviceMultiLightpack
2016-06-25 22:08:17 +02:00
redPanther
93e3981df1 Serialport (#36)
* migrate serialport to qt5 serialport

* remove old serialport
add logging to serialport

* remove try catch - qt serialport uses plain return values

* tiny fix, but not working atm

* make it work, tested with adalight
2016-06-23 00:11:09 +02:00
brindosch
065e65b8e0 cleanup: remove ambiled and fix typo (#13)
* cleanup: remove ambiled device

as written at the forum this is no longer supported. All people should move to adalight. They just need to flash a new sketch.

* fix typo
2016-06-19 17:18:11 +02:00
penfold42
d5ce395e8e Add sk6812rgbw support (#666)
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config

Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process

* reversing errant change to hyperion.systemd.sh

* adding support for SK6812 - not working yet

* Changed rpi_ws281x submodule to be penfold42's fork

* Set White to zero for now

* starting on the code to make the White led do stuff

* Added some basic whie led calculation
white = min(r,g,b)
r-=w, g-=w, b-=w

* cleaned up a couple of compiler warnings

* updated strip type to use corrected RGBW strip type
(the SK6812RGBW datasheet is wrong)

* moved bitpair_to_byte initialiser to (hopefully) work with older GCC

* compiler warning in udp driver
removed some tabs in ws2812b.cpp

* formatting - spaces to tabs

* moved rpi_281x to tag sk6812-v1.0

* attempt #3 at migrating the rpi_281x submodule to my fork/branch

* moving to my fork of rpi_281x

* Started implementing multiple RGB to RGBW conversion options

a quick hack has been implemented inside WS281x.cpp but ive started
moving this to RgbToRgbw.cpp for reuse by other led device types

* migrated RGB to RGBW conversion to RgbToRgbw.cpp


Former-commit-id: ff8e9038c4bb8203b71b42d12bf23be4abcc0b3b
2016-05-31 22:55:56 +02:00
penfold42
6f43fe1196 New QT based udp driver (#662)
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config

Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process

* reversing errant change to hyperion.systemd.sh

* cleaned up a couple of compiler warnings

* moved bitpair_to_byte initialiser to (hopefully) work with older GCC

* compiler warning in udp driver
removed some tabs in ws2812b.cpp

* formatting - spaces to tabs

* moved rpi_281x to tag sk6812-v1.0

* moving to my fork of rpi_281x

* half way thru re merging the newudp support

* Whoops.... dont know how it compiled before..

* Removed debugging that was commented out


Former-commit-id: ac4330422f93f3d594dfcba5593759288298d25e
2016-05-30 23:58:31 +02:00
penfold42
a960894d14 Another option for Ws2812 - direct spi from the pi with 1 wire (#631)
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config

Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process

* reversing errant change to hyperion.systemd.sh

* This add a new device type - ws2812spi.

I've (ab)used the SPI interface to send the correct timing pulses to keep the ws2812 happy.
THE RATE IS IMPORTANT!
A FIXED CORE_CLK IS IMPORTANT!

Attach the SPI MOSI pin on the Pi to the DIN pin on your ws2812

        "device" :
        {
                "name"       : "MyPi",
                "type"       : "ws2812spi",
                "colorOrder" : "grb",
                "output"     : "/dev/spidev0.0",
                "rate"       : 3800000
        },

* updated hyperiond.test-binary

* Updated default SPI speed to the "correct" value.
My Pi was undervolted so was dropping the core clock confusing everything

* Code cleanups
explicitly set the final 3 bytes to 0

* Removed latchtime option - not applicable

* updated test binary


Former-commit-id: d3c19c8374999f7a554bb25ca181a8a483f86289
2016-05-15 18:39:17 +02:00
penfold42
c17e4894d9 Apa102 fix if the led strip has more physical LEDs than you want to configure with hyperion (#626)
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config

Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process

* reversing errant change to hyperion.systemd.sh

* started bug fixes for APA strips with more physical leds than configured

* 1st cut of changes to APA102.

now looks at config for "leds" which is the # of hardware leds in the strip.
This enables us to write the correct trailer length in the packet.

Also fixed a bug where switchoff was writing the wrong # of leds

* removed commented out old code

removed debug printf

* included prebuild test binary for Pi2

* Second attempt at the fix.
BEFORE:
If you have more physcial LEDs than defined in the "leds" "index" section of the config there is random junk added to the end of the strip.

WITH THIS FIX:
In the "device" section specify the number of physical leds with:
 "leds" : 212,
If this is greater than the number of led indexes, additional LEDs are set to black
If this is smaller than the number of led indexes, it is ignored

* included test binary

* Clean exit if the device config is missing or a non-supported device type is specified

Former-commit-id: 8ae96188fa74d91b13a921e7d5faf6d6ac1c42ee
2016-05-10 12:16:19 +02:00
penfold42
deed8066b0 Piblaster fix (#614)
* Removed -HUP so the default -TERM signal is sent instead.
- hyperiond only listens for TERM and INT. HUP is often used to get an exe to reread its config

Changed pgrep to add '-x' so it wont partial match on the exe name.
- I have multiple instances with multiple hyperiond-instance1 names
- this ensures the service script only kills the right process

* reversing errant change to hyperion.systemd.sh

* Experimental changes to piblaster code to work how i think it should

It is now assumed that the PWM pins in groups of 3 correspond to RGB channels of the led.
                "assignment"       : "rgbrgbrgb",
Would result in:
//Channel number    GPIO number   Led channel
//      0               4             0 red
//      1              17             0 green
//      2              18             0 blue
//      4              27             1 red
//      5              21             1 green
//      6              22             1 blue
//      7              23             2 red
//      8              24             2 green
//      9              25             2 blue

* Ammend pwm channel mapping comments to match the code

* 1st cut of the new more flexible piblaster pin mapping support

it works but is still rough

* removed old "assignment" handling
- prints an error messaage if found and terminates

fixed the switchoff method

* removing iPins hard coded list of valid GPIO pins

* removed iPins array for switchOff function

* code cleanups

input validation

* Handle catching (and ignoring) SIGPIPE.
You can now kill and restart pi-blaster daemon and hyperiond will gracefully recover

* added a binary for testing

* Added sample config and my modified pi-blaster version to support more GPIOs

* moved hyperiond

* removed testing binaries

move sample configuration to the configs directory

* re enabled device config display

* removed sample configuration


Former-commit-id: 95e4d4ea2fb7cb5439e8cd597883a638da61a574
2016-04-29 16:00:33 +02:00
Rick164
02fef83bb8 AtmoOrb smoothing additions
* Updated smoothing options for AtmoOrb, can now choose between Orb external or Hyperion's internal smoothing.
With skipSmoothingDif you can set the maximum allowed color difference before overriding / clearing Orb smoothing during faster color change like for instance color <-> black.

* Updated inline documentation.

* Fixed command type typo in AtmoOrb device.

* Corrected variable spelling in AtmoOrb device.

* Make smoothing also match equal values for AtmoOrb smoothing differential


Former-commit-id: 3eede43c2f76fa324f0144aeac0526b8125ad149
2016-04-02 00:07:28 +02:00
brindosch
f332473b77 Merge remote-tracking branch 'refs/remotes/origin/Beta'
Former-commit-id: 5bdbda1406bb0ddb99440502584604b85b0f3063
2016-03-23 17:53:32 +01:00
brindosch
fa66c3b2b5 Rework log messages
Former-commit-id: eac93c0fd78fdf353e940d08df3cabf0b962a3e2
2016-03-23 17:40:45 +01:00
penfold42
a3204ae6be LedDeviceFile now defaults to /dev/null if the output is omitted.
Former-commit-id: eff12ec16d08ffa00287ed68238ab6b397f1c53d
2016-03-23 21:28:31 +11:00
penfold42
7dce3ab798 renamed the "Test" device to be "File"
No functional changes, but
- files have been renamed
- the device name is now "file" not "test"


Former-commit-id: 3fbc03c3fe1d764654c1d28ebb80562ce6276ab1
2016-03-23 21:12:34 +11:00
penfold42
6143075365 1. changed default number of pwm LEDs to 256
2. Adds support for level shifters that invert the data
Config option - "invert" (integer)
if omitted, do not invert
if == 0, do not invert
if !=0, invert


Former-commit-id: fd5b2863a85b11ac3a8444d1e02822f852feb556
2016-03-22 23:50:14 +11:00
brindosch
fb7445b545 Update
Former-commit-id: 3c6ac5d2f618cd7499c16bca950ff3d41f855318
2016-03-22 01:01:54 +01:00
Mark Walker
d2973ff20b Add ws281x driver parameter for PWM channel
The RPi 2 and 3 have two PWM channels and 3 PWM pins available to the
gpio header.  BCM18 and BCM12 run on PWM channel 0.  BCM13 runs on PWM
channel 1.  This change allows BCM13 to be used by allowing the PWM
channel to be specified.


Former-commit-id: 3693ab438c2b369e6307c262d32bba509409e5b9
2016-03-20 22:05:24 -07:00
RickDB
7adb339dea Updated orbIds config setting and sample config.
Former-commit-id: 350db40b53d04efbb43dc8c87c88bf2eb378fa6b
2016-03-15 18:37:55 +01:00
RickDB
f783c59185 Corrected indenting in LedDeviceFactory.cpp.
Former-commit-id: 31713a4a0ce9bd25fd1e39969bbb481363a80167
2016-03-15 12:06:24 +01:00
RickDB
bd1a45216a Initial AtmoOrb support including sample json config.
Former-commit-id: 51ad57afd39695095b5886966e8c71c4e47f269e
2016-03-14 20:19:19 +01:00
brindosch
e82643ff50 Merge pull request #533 from markwal/rpi_ws281x
Add new WS281x driver

Former-commit-id: 1264edf7f5e0bc29f091e72989ab7116b78056bf
2016-03-11 19:10:13 +01:00
brindosch
385d5a896d Cleanup and bugfixes
Former-commit-id: 8622ff7fb963eb7c52e816f1c779e9e9869ece53
2016-03-11 19:06:36 +01:00
Mark Walker
78e606a1c4 Add new WS281x driver
Add a new WS281x driver which is a wrapper around jgarff's ws281x library which
works on Pi B+, Pi 2, Pi Zero and probably Pi 3 as well.

jgarff's ws281x library is included as a submodule


Former-commit-id: e473dfd36d31b14598da5e56e4b8bf9f2aa7bb24
2016-03-08 20:41:13 -08:00
penfold42
3bd03e73ff Merge branch 'master' of https://github.com/penfold42/hyperion
merge to local


Former-commit-id: ebba9a31b2139201b75dc098eba8c8ee9d630ebf
2016-02-13 23:01:04 +11:00
penfold42
ca24450618 added configurable latchtime for 2801 SPI driver
Former-commit-id: a10b0bd24a85580b021c735b30ebd2635180a514
2016-02-13 23:00:31 +11:00
wisc
773222192d fixed upd merge conflicts and fadecandy compiler warning
Former-commit-id: cb9506a68deff80a331f6455c3cb8fa783a2140e
2016-02-10 00:57:21 +01:00
redpanther
b6060d392e make opc channel available in via config.
Former-commit-id: 6a065cd049e29d7184a3aa1454de0fe1855e9941
2016-01-27 10:44:51 +01:00
penfold42
382f22f23c add udp protocol support
Former-commit-id: a92810f14cf2af15710a38246a742ca2b94fd3bd
2016-01-06 20:40:48 +11:00
redpanther
7f5a664864 set fadecandy default port to original fcserver port number
tune debug output of fadecandy device


Former-commit-id: 651459e5294ce5721ebe3bb2a6acdc1d096d9cfb
2016-01-04 12:26:06 +01:00
redpanther
13715202d8 add fadecandy led device
Former-commit-id: 490fd3ee66041b35b95d2c7ec110cc70e4c01d8d
2016-01-04 12:16:44 +01:00
NicoHood
3595709099 Adapted Paintpack to HIDDevice API
Former-commit-id: 06101f0e99fbe99f8994193cea337b400acbafe3
2015-11-08 17:30:12 +01:00
NicoHood
29d3209d7d Added Raw HID device
Former-commit-id: bd36530b6b63959ee4d83693e396cbb0af70ddb3
2015-11-08 17:29:53 +01:00
tociek
33edcddb1b APA102 device for use with Adalight (nominaly for ws2801)
Former-commit-id: 7fb9e8e84518be9387ea9feca11e93a8a5389e4f
2015-10-13 19:11:01 +02:00
ntim
f83802f2b1 Corrected type of json array value index
Former-commit-id: f766365fc3be4d1b62c36ce05e8a6d818f73dede
2015-03-07 09:58:48 +01:00
Tim Niggemann
ecea6e55ea Added light ids to device config.
Former-commit-id: 601616b0d7509b0e8ebb5226f00af5028fa905b5
2015-03-03 15:45:09 +01:00
tvdzwan
b1f62cca40 Merge pull request #253 from aufano/master
Carsten Atmolight support

Former-commit-id: a1a3c245a037e3d9604cff6c5a228e9f2842a7fb
2015-02-23 15:38:02 +01:00
aufano
be3f3a968c Carsten Atmolight support
http://ca.rstenpresser.de/index.php/atmo-main.html

Former-commit-id: cd543a063af50455e3e92fc9e89c2503bef95188
2015-02-04 21:49:33 +01:00
Tim Niggemann
dfc2e6bfb5 Default setting of transition time to 100 ms.
Former-commit-id: c0981e09494c59456f45325cdcacf9bfa6e26c99
2015-02-01 15:56:51 +01:00
Tim Niggemann
9d506b888d Added config options for username and transitiontime
Former-commit-id: 2ae179c670fda838115d985f40d970e10ef002ef
2015-02-01 15:29:40 +01:00
T. van der Zwan
1bb93da59b Added support for AmbiLED-HD device (http://www.ambiledhd.com)
Former-commit-id: 60ec75898a04b5ca993242d0aef6edc01997fe82
2015-01-05 14:28:21 +01:00
wayland
a4bcdcc10a Added APA102 device to factory
Former-commit-id: 4d7c8889aee2ca7b75c0e0ec90e9b5833257324d
2014-12-03 18:41:44 +01:00
wayland
205fe8ab66 Added APA102 device to factory
Former-commit-id: ecea592ddf97bdcc2c54d12af194c15d6c09966a
2014-12-03 09:34:48 +01:00