// This is a example config (hyperion.config.json) with comments, in any case you need to create your own one with HyperCon! // Webpage: https://www.hyperion-project.org { /// Device configuration contains the following fields: /// * 'name' : The user friendly name of the device (only used for display purposes) /// * 'type' : The type of the device or leds (known types for now are /// APA102, WS2801, P9813, LPD6803, LPD8806, ---------PWM---------, WS2812b (just RPi1), WS281X (RPi1, RPi2, RPi3), --------OTHER--------, PhilipsHUE, AtmoOrb, PiBlaster, Tinkerforge, FadeCandy, RawHID (USB), UDP, SEDU, TPM2, USBASP-WS2801, USBASP-WS2812, ------3rd PARTY------, Adalight, AdalightAPA102, AmbiLed, Atmo, Lightpack, Multi-Lightpack, Paintpack, Test (file), None) /// * [device type specific configuration] /// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.). "device" : { "name" : "MyHyperionConfig", "type" : "ws2801", "output" : "/dev/spidev0.0", "rate" : 1000000, "colorOrder" : "rgb" }, /// Color manipulation configuration used to tune the output colors to specific surroundings. /// The configuration contains a list of color-transforms. Each transform contains the /// following fields: /// * 'channelAdjustment' /// * 'id' : The unique identifier of the channel adjustments (eg 'device_1') /// * 'leds' : The indices (or index ranges) of the leds to which this channel adjustment applies /// (eg '0-5, 9, 11, 12-17'). The indices are zero based. /// * 'pureRed'/'pureGreen'/'pureBlue' : The manipulation in the Red-Green-Blue color domain with the /// following tuning parameters for each channel: /// * 'temperature' /// * 'id' : The unique identifier of the temperature (eg 'device_1') /// * 'leds' : The indices (or index ranges) of the leds to which this temperature applies /// (eg '0-5, 9, 11, 12-17'). The indices are zero based. /// * 'red'/'green'/'blue' : The temperature manipulation in the Red-Green-Blue color domain with the /// following tuning parameters for each channel: /// * 'transform' /// * 'id' : The unique identifier of the color transformation (eg 'device_1') /// * 'leds' : The indices (or index ranges) of the leds to which this color transform applies /// (eg '0-5, 9, 11, 12-17'). The indices are zero based. /// * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following /// tuning parameters: /// - 'saturationGain' The gain adjustement of the saturation /// - 'luminanceGain' The gain adjustement of the luminance /// - 'luminanceMinimum' The minimum luminance (backlight) /// * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue color domain with the /// following tuning parameters for each channel: /// - 'threshold' The minimum required input value for the channel to be on /// (else zero) /// - 'gamma' The gamma-curve correction factor /// /// Next to the list with color transforms there is also a smoothing option. /// * 'smoothing' : Smoothing of the colors in the time-domain with the following tuning /// parameters: /// - 'type' The type of smoothing algorithm ('linear' or 'none') /// - 'time_ms' The time constant for smoothing algorithm in milliseconds /// - 'updateFrequency' The update frequency of the leds in Hz /// - 'updateDelay' The delay of the output to leds (in periods of smoothing) "color" : { "channelAdjustment" : [ { "id" : "default", "leds" : "*", "pureRed" : { "redChannel" : 255, "greenChannel" : 0, "blueChannel" : 0 }, "pureGreen" : { "redChannel" : 0, "greenChannel" : 255, "blueChannel" : 0 }, "pureBlue" : { "redChannel" : 0, "greenChannel" : 0, "blueChannel" : 255 } } ], "temperature" : [ { "id" : "default", "leds" : "*", "temperatureValues" : { "red" : 255, "green" : 255, "blue" : 255 } } ], "transform" : [ { "id" : "default", "leds" : "*", "hsl" : { "saturationGain" : 1.0000, "luminanceGain" : 1.0000, "luminanceMinimum" : 0.0000 }, "red" : { "threshold" : 0.0000, "gamma" : 2.5000 }, "green" : { "threshold" : 0.0000, "gamma" : 2.5000 }, "blue" : { "threshold" : 0.0000, "gamma" : 2.5000 } } ], "smoothing" : { "type" : "linear", "time_ms" : 200, "updateFrequency" : 20.0000, "updateDelay" : 0 } }, /// The black border configuration, contains the following items: /// * enable : true if the detector should be activated /// * threshold : Value below which a pixel is regarded as black (value between 0.0 and 1.0) /// * unknownFrameCnt : Number of frames without any detection before the border is set to 0 (default 600) /// * borderFrameCnt : Number of frames before a consistent detected border gets set (default 50) /// * maxInconsistentCnt : Number of inconsistent frames that are ignored before a new border gets a chance to proof consistency /// * blurRemoveCnt : Number of pixels that get removed from the detected border to cut away blur (default 1) /// * mode : Border detection mode (values=default,classic,osd) "blackborderdetector" : { "enable" : true, "threshold" : 0.0, "unknownFrameCnt" : 600, "borderFrameCnt" : 50, "maxInconsistentCnt" : 10, "blurRemoveCnt" : 1, "mode" : "default" }, /// The configuration of the effect engine, contains the following items: /// * paths : An array with absolute location(s) of directories with effects /// * color : Set static color after boot -> set effect to "" (empty) and input the values [R,G,B] and set duration_ms NOT to 0 (use 1) instead /// * effect : The effect selected as 'boot sequence' /// * duration_ms : The duration of the selected effect (0=endless) /// * priority : The priority of the selected effect/static color (default=990) HINT: lower value result in HIGHER priority! "effects" : { "paths" : [ "/opt/hyperion/effects" ] }, "bootsequence" : { "color" : [0,0,0], "effect" : "Rainbow swirl fast", "duration_ms" : 3000, "priority" : 990 }, /// The configuration of the Json/Proto forwarder. Forward messages to multiple instances of Hyperion on same and/or other hosts /// 'proto' is mostly used for video streams and 'json' for effects /// * proto : Proto server adress and port of your target. Syntax:[IP:PORT] -> ["127.0.0.1:19447"] or more instances to forward ["127.0.0.1:19447","192.168.0.24:19449"] /// * json : Json server adress and port of your target. Syntax:[IP:PORT] -> ["127.0.0.1:19446"] or more instances to forward ["127.0.0.1:19446","192.168.0.24:19448"] /// HINT: If you redirect to "127.0.0.1" (localhost) you could start a second hyperion with another device/led config! /// Be sure your client(s) is/are listening on the configured ports. The second Hyperion (if used) also needs to be configured! (HyperCon -> External -> Json Server/Proto Server) "forwarder" : { "proto" : ["127.0.0.1:19447"], "json" : ["127.0.0.1:19446"] }, /// The configuration for the frame-grabber, contains the following items: /// * width : The width of the grabbed frames [pixels] /// * height : The height of the grabbed frames [pixels] /// * frequency_Hz : The frequency of the frame grab [Hz] /// * priority : The priority of the frame-gabber (Default=890) HINT: lower value result in HIGHER priority! /// * ATTENTION : Power-of-Two resolution is not supported and leads to unexpected behaviour! "framegrabber" : { "width" : 64, "height" : 64, "frequency_Hz" : 10.0, "priority" : 890 }, /// The configuration of the Kodi connection used to enable and disable the frame-grabber. Contains the following fields: /// * xbmcAddress : The IP address of the Kodi-host /// * xbmcTcpPort : The TCP-port of the Kodi-server /// * grabVideo : Flag indicating that the frame-grabber is on(true) during video playback /// * grabPictures : Flag indicating that the frame-grabber is on(true) during picture show /// * grabAudio : Flag indicating that the frame-grabber is on(true) during audio playback /// * grabMenu : Flag indicating that the frame-grabber is on(true) at the Kodi menu /// * grabPause : Flag indicating that the frame-grabber is on(true) at player state "pause" /// * grabScreensaver : Flag indicating that the frame-grabber is on(true) when Kodi is on screensaver /// * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing "xbmcVideoChecker" : { "xbmcAddress" : "127.0.0.1", "xbmcTcpPort" : 9090, "grabVideo" : true, "grabPictures" : true, "grabAudio" : true, "grabMenu" : false, "grabPause" : false, "grabScreensaver" : true, "enable3DDetection" : true }, /// The configuration of the Json server which enables the json remote interface /// * port : Port at which the json server is started "jsonServer" : { "port" : 19444 }, /// The configuration of the Proto server which enables the protobuffer remote interface /// * port : Port at which the protobuffer server is started "protoServer" : { "port" : 19445 }, /// The configuration of the boblight server which enables the boblight remote interface /// * port : Port at which the boblight server is started /// * priority: Priority of the boblight server (Default=900) HINT: lower value result in HIGHER priority! "boblightServer" : { "port" : 19333, "priority" : 900 }, /// Configuration for the embedded V4L2 grabber /// * device : V4L2 Device to use [default="/dev/video0"] /// * input : V4L2 input to use [default=0] /// * standard : Video standard (no-change/PAL/NTSC) [default="no-change"] /// * width : V4L2 width to set [default=-1] /// * height : V4L2 height to set [default=-1] /// * frameDecimation : Frame decimation factor [default=2] /// * sizeDecimation : Size decimation factor [default=8] /// * priority : Hyperion priority channel [default=900] /// * mode : 3D mode to use 2D/3DSBS/3DTAB (note: no autodetection) [default="2D"] /// * cropLeft : Cropping from the left [default=0] /// * cropRight : Cropping from the right [default=0] /// * cropTop : Cropping from the top [default=0] /// * cropBottom : Cropping from the bottom [default=0] /// * redSignalThreshold : Signal threshold for the red channel between 0.0 and 1.0 [default=0.0] /// * greenSignalThreshold : Signal threshold for the green channel between 0.0 and 1.0 [default=0.0] /// * blueSignalThreshold : Signal threshold for the blue channel between 0.0 and 1.0 [default=0.0] "grabber-v4l2" : { "device" : "/dev/video0", "input" : 0, "standard" : "no-change", "width" : -1, "height" : -1, "frameDecimation" : 2, "sizeDecimation" : 8, "priority" : 900, "mode" : "2D", "cropLeft" : 0, "cropRight" : 0, "cropTop" : 0, "cropBottom" : 0, "redSignalThreshold" : 0.0, "greenSignalThreshold" : 0.0, "blueSignalThreshold" : 0.0 }, /// The configuration for each individual led. This contains the specification of the area /// averaged of an input image for each led to determine its color. Each item in the list /// contains the following fields: /// * index: The index of the led. This determines its location in the string of leds; zero /// being the first led. /// * hscan: The fractional part of the image along the horizontal used for the averaging /// (minimum and maximum inclusive) /// * vscan: The fractional part of the image along the vertical used for the averaging /// (minimum and maximum inclusive) "leds" : [ { "index" : 0, "hscan" : { "minimum" : 0.5000, "maximum" : 0.5625 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 1, "hscan" : { "minimum" : 0.4375, "maximum" : 0.5000 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 2, "hscan" : { "minimum" : 0.3750, "maximum" : 0.4375 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 3, "hscan" : { "minimum" : 0.3125, "maximum" : 0.3750 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 4, "hscan" : { "minimum" : 0.2500, "maximum" : 0.3125 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 5, "hscan" : { "minimum" : 0.1875, "maximum" : 0.2500 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 6, "hscan" : { "minimum" : 0.1250, "maximum" : 0.1875 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 7, "hscan" : { "minimum" : 0.0625, "maximum" : 0.1250 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 8, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0625 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 9, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.8571, "maximum" : 1.0000 } }, { "index" : 10, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.7143, "maximum" : 0.8571 } }, { "index" : 11, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.5714, "maximum" : 0.7143 } }, { "index" : 12, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.4286, "maximum" : 0.5714 } }, { "index" : 13, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.2857, "maximum" : 0.4286 } }, { "index" : 14, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.1429, "maximum" : 0.2857 } }, { "index" : 15, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1429 } }, { "index" : 16, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0625 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 17, "hscan" : { "minimum" : 0.0625, "maximum" : 0.1250 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 18, "hscan" : { "minimum" : 0.1250, "maximum" : 0.1875 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 19, "hscan" : { "minimum" : 0.1875, "maximum" : 0.2500 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 20, "hscan" : { "minimum" : 0.2500, "maximum" : 0.3125 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 21, "hscan" : { "minimum" : 0.3125, "maximum" : 0.3750 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 22, "hscan" : { "minimum" : 0.3750, "maximum" : 0.4375 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 23, "hscan" : { "minimum" : 0.4375, "maximum" : 0.5000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 24, "hscan" : { "minimum" : 0.5000, "maximum" : 0.5625 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 25, "hscan" : { "minimum" : 0.5625, "maximum" : 0.6250 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 26, "hscan" : { "minimum" : 0.6250, "maximum" : 0.6875 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 27, "hscan" : { "minimum" : 0.6875, "maximum" : 0.7500 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 28, "hscan" : { "minimum" : 0.7500, "maximum" : 0.8125 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 29, "hscan" : { "minimum" : 0.8125, "maximum" : 0.8750 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 30, "hscan" : { "minimum" : 0.8750, "maximum" : 0.9375 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 31, "hscan" : { "minimum" : 0.9375, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 32, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1429 } }, { "index" : 33, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.1429, "maximum" : 0.2857 } }, { "index" : 34, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.2857, "maximum" : 0.4286 } }, { "index" : 35, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.4286, "maximum" : 0.5714 } }, { "index" : 36, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.5714, "maximum" : 0.7143 } }, { "index" : 37, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.7143, "maximum" : 0.8571 } }, { "index" : 38, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.8571, "maximum" : 1.0000 } }, { "index" : 39, "hscan" : { "minimum" : 0.9375, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 40, "hscan" : { "minimum" : 0.8750, "maximum" : 0.9375 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 41, "hscan" : { "minimum" : 0.8125, "maximum" : 0.8750 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 42, "hscan" : { "minimum" : 0.7500, "maximum" : 0.8125 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 43, "hscan" : { "minimum" : 0.6875, "maximum" : 0.7500 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 44, "hscan" : { "minimum" : 0.6250, "maximum" : 0.6875 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 45, "hscan" : { "minimum" : 0.5625, "maximum" : 0.6250 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } } ], "endOfJson" : "endOfJson" }