mirror of
https://github.com/hyperion-project/hyperion.ng.git
synced 2023-10-10 13:36:59 +02:00
* implement make install set CMAKE_INSTALL_PREFIX e.g. to /opt to install to /opt/hyperion set ENABLE_SYSTEM_INSTALL to ON to activate installation after compiling use make install or make install/strip (for performance/size optimized binaries - compile in Release to get best performance) * cleanup cmake files use cmake -DINSTALL_PREFIX=/opt/hyperion .. to install all files to hyperion or cmake -DINSTALL_PREFIX=/usr/ to install to usr. install folders are linux standard. bin go to bin folder and additionals (effects) go to share/hyperion * add uninstall target - be patient with that, this will remove files from your system install service files to share/hyperion - if you want to use them you have to make a symlink to your location of service files * optimize build release script install service files into hyperion share folder (services not activated, this must be done by distribution package script) initial support of cmake option -DPLATFORM= option. This selects platform specific cmake flags. no need for -DENABLE_... options (unless you want some special things) automatic detect for apple build * update submodule * fix cmake error when no platform is given * initial support for deb,rpm and tgz packages - no usefull content atm! * make packeages contain usefull stuff * add license make packes more functional. package specific install missing yet * implement debian postinstall * disable rpm generation until it has a working state * add hypercon compat * add posibility for multiple config files. first one found is taken Former-commit-id: 1c2669961da98fd05a97359e75f1d6d68e126715
194 lines
6.2 KiB
CMake
194 lines
6.2 KiB
CMake
# Define the main-project name
|
|
project(hyperion)
|
|
|
|
# define the minimum cmake version (as required by cmake)
|
|
cmake_minimum_required(VERSION 2.8)
|
|
|
|
#set(CMAKE_TOOLCHAIN_FILE /opt/raspberrypi/Toolchain-RaspberryPi.cmake)
|
|
|
|
|
|
SET ( DEFAULT_AMLOGIC OFF )
|
|
SET ( DEFAULT_DISPMANX OFF )
|
|
SET ( DEFAULT_FB OFF )
|
|
SET ( DEFAULT_OSX OFF )
|
|
SET ( DEFAULT_X11 OFF )
|
|
SET ( DEFAULT_SPIDEV OFF )
|
|
SET ( DEFAULT_WS2812BPWM OFF )
|
|
SET ( DEFAULT_WS281XPWM OFF )
|
|
|
|
if (APPLE)
|
|
SET ( DEFAULT_OSX ON )
|
|
else ()
|
|
if ( "${PLATFORM}" STREQUAL "rpi" )
|
|
SET ( DEFAULT_DISPMANX ON )
|
|
SET ( DEFAULT_SPIDEV ON )
|
|
elseif ( "${PLATFORM}" STREQUAL "rpi-pwm" )
|
|
SET ( DEFAULT_DISPMANX ON )
|
|
SET ( DEFAULT_WS2812BPWM ON )
|
|
SET ( DEFAULT_WS281XPWM ON )
|
|
SET ( DEFAULT_SPIDEV ON )
|
|
elseif ( "${PLATFORM}" STREQUAL "wetek" )
|
|
SET ( DEFAULT_AMLOGIC ON )
|
|
SET ( DEFAULT_FB ON )
|
|
elseif ( "${PLATFORM}" STREQUAL "x86" )
|
|
SET ( DEFAULT_X11 ON )
|
|
SET ( DEFAULT_FB ON )
|
|
elseif ( "${PLATFORM}" STREQUAL "imx6" )
|
|
SET ( DEFAULT_FB ON )
|
|
endif()
|
|
endif ()
|
|
|
|
# set the build options
|
|
option(ENABLE_AMLOGIC "Enable the AMLOGIC video grabber" ${DEFAULT_AMLOGIC} )
|
|
message(STATUS "ENABLE_AMLOGIC = " ${ENABLE_AMLOGIC})
|
|
|
|
option(ENABLE_DISPMANX "Enable the RPi dispmanx grabber" ${DEFAULT_DISPMANX} )
|
|
message(STATUS "ENABLE_DISPMANX = " ${ENABLE_DISPMANX})
|
|
|
|
option(ENABLE_FB "Enable the framebuffer grabber" ${DEFAULT_FB} )
|
|
message(STATUS "ENABLE_FB = " ${ENABLE_FB})
|
|
|
|
option(ENABLE_OSX "Enable the osx grabber" ${DEFAULT_OSX} )
|
|
message(STATUS "ENABLE_OSX = " ${ENABLE_OSX})
|
|
|
|
option(ENABLE_PROTOBUF "Enable PROTOBUF server" ON)
|
|
message(STATUS "ENABLE_PROTOBUF = " ${ENABLE_PROTOBUF})
|
|
|
|
option(ENABLE_SPIDEV "Enable the SPIDEV device" ${DEFAULT_SPIDEV} )
|
|
message(STATUS "ENABLE_SPIDEV = " ${ENABLE_SPIDEV})
|
|
|
|
option(ENABLE_TINKERFORGE "Enable the TINKERFORGE device" ON)
|
|
message(STATUS "ENABLE_TINKERFORGE = " ${ENABLE_TINKERFORGE})
|
|
|
|
option(ENABLE_V4L2 "Enable the V4L2 grabber" ON)
|
|
message(STATUS "ENABLE_V4L2 = " ${ENABLE_V4L2})
|
|
|
|
option(ENABLE_WS2812BPWM "Enable the WS2812b-PWM device" ${DEFAULT_WS2812BPWM} )
|
|
message(STATUS "ENABLE_WS2812BPWM = " ${ENABLE_WS2812BPWM})
|
|
|
|
option(ENABLE_WS281XPWM "Enable the WS281x-PWM device" ${DEFAULT_WS281XPWM} )
|
|
message(STATUS "ENABLE_WS281XPWM = " ${ENABLE_WS281XPWM})
|
|
|
|
option(ENABLE_X11 "Enable the X11 grabber" ${DEFAULT_X11})
|
|
message(STATUS "ENABLE_X11 = " ${ENABLE_X11})
|
|
|
|
option(ENABLE_QT5 "Enable QT5" OFF)
|
|
message(STATUS "ENABLE_QT5 = " ${ENABLE_QT5})
|
|
|
|
option(ENABLE_TESTS "Compile additional test applications" OFF)
|
|
message(STATUS "ENABLE_TESTS = " ${ENABLE_TESTS})
|
|
|
|
if(ENABLE_V4L2 AND NOT ENABLE_PROTOBUF)
|
|
message(FATAL_ERROR "V4L2 grabber requires PROTOBUF. Disable V4L2 or enable PROTOBUF")
|
|
endif()
|
|
|
|
if(ENABLE_FB AND ENABLE_DISPMANX)
|
|
message(FATAL_ERROR "dispmanx grabber and framebuffer grabber cannot be used at the same time")
|
|
endif()
|
|
|
|
if(ENABLE_FB AND ENABLE_OSX)
|
|
message(FATAL_ERROR "osx grabber and framebuffer grabber cannot be used at the same time")
|
|
endif()
|
|
|
|
if(ENABLE_OSX AND ENABLE_DISPMANX)
|
|
message(FATAL_ERROR "dispmanx grabber and osx grabber cannot be used at the same time")
|
|
endif()
|
|
|
|
SET ( PROTOBUF_INSTALL_BIN_DIR ${CMAKE_BINARY_DIR}/proto )
|
|
SET ( PROTOBUF_INSTALL_LIB_DIR ${CMAKE_BINARY_DIR}/proto )
|
|
|
|
#if(ENABLE_QT5)
|
|
# TODO vs ENABLE_QT4?
|
|
#endif(ENABLE_QT5)
|
|
|
|
# Createt the configuration file
|
|
|
|
# Add project specific cmake modules (find, etc)
|
|
set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_CURRENT_SOURCE_DIR}/cmake)
|
|
|
|
find_package(GitVersion)
|
|
|
|
# configure a header file to pass some of the CMake settings
|
|
# to the source code
|
|
configure_file("${PROJECT_SOURCE_DIR}/HyperionConfig.h.in" "${PROJECT_BINARY_DIR}/HyperionConfig.h")
|
|
include_directories("${PROJECT_BINARY_DIR}")
|
|
|
|
if(ENABLE_QT5)
|
|
ADD_DEFINITIONS ( -DENABLE_QT5 )
|
|
#find_package(Qt5Widgets)
|
|
else()
|
|
# Add specific cmake modules to find qt4 (default version finds first available QT which might not be qt4)
|
|
set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_CURRENT_SOURCE_DIR}/cmake/qt4)
|
|
endif()
|
|
|
|
# Define the global output path of binaries
|
|
SET(LIBRARY_OUTPUT_PATH ${PROJECT_BINARY_DIR}/lib)
|
|
SET(EXECUTABLE_OUTPUT_PATH ${PROJECT_BINARY_DIR}/bin)
|
|
|
|
file(MAKE_DIRECTORY ${LIBRARY_OUTPUT_PATH})
|
|
file(MAKE_DIRECTORY ${EXECUTABLE_OUTPUT_PATH})
|
|
|
|
# Add the project include directory as additional include path
|
|
include_directories(${CMAKE_SOURCE_DIR}/dependencies/include)
|
|
include_directories(${CMAKE_SOURCE_DIR}/include)
|
|
|
|
# Prefer static linking over dynamic
|
|
#set(CMAKE_FIND_LIBRARY_SUFFIXES ".a;.so")
|
|
|
|
# enable C++11
|
|
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++0x -Wall")
|
|
#set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -stdlib=libc++ -std=c++11 -Wall")
|
|
|
|
if(ENABLE_QT5)
|
|
#find_package(Qt5Core REQUIRED)
|
|
find_package(Qt5 COMPONENTS Core Gui Widgets Network REQUIRED)
|
|
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${Qt5Widgets_EXECUTABLE_COMPILE_FLAGS}")
|
|
# set(CMAKE_CXX_FLAGS "-fPIC")
|
|
else()
|
|
# Configure the use of QT4
|
|
find_package(Qt4 COMPONENTS QtCore QtNetwork QtGui REQUIRED QUIET)
|
|
endif()
|
|
|
|
#add libusb and pthreads
|
|
find_package(libusb-1.0 REQUIRED)
|
|
find_package(Threads REQUIRED)
|
|
if(ENABLE_QT5)
|
|
#include(${QT_USE_FILE})
|
|
add_definitions(${QT_DEFINITIONS})
|
|
else()
|
|
include(${QT_USE_FILE})
|
|
add_definitions(${QT_DEFINITIONS})
|
|
endif()
|
|
|
|
# TODO[TvdZ]: This linking directory should only be added if we are cross compiling
|
|
if(NOT APPLE)
|
|
link_directories(${CMAKE_FIND_ROOT_PATH}/lib/arm-linux-gnueabihf)
|
|
endif()
|
|
|
|
if(ENABLE_OSX)
|
|
set(CMAKE_EXE_LINKER_FLAGS "-framework CoreGraphics")
|
|
endif()
|
|
|
|
configure_file(bin/install_hyperion.sh ${LIBRARY_OUTPUT_PATH} @ONLY)
|
|
configure_file(config/hyperion.config.json ${LIBRARY_OUTPUT_PATH} @ONLY)
|
|
configure_file(config/hyperion_x86.config.json ${LIBRARY_OUTPUT_PATH} @ONLY)
|
|
|
|
# Add the source/lib directories
|
|
add_subdirectory(dependencies)
|
|
add_subdirectory(libsrc)
|
|
add_subdirectory(src)
|
|
if (ENABLE_TESTS)
|
|
add_subdirectory(test)
|
|
endif ()
|
|
|
|
# Add the doxygen generation directory
|
|
add_subdirectory(doc)
|
|
|
|
# uninstall target
|
|
configure_file( "${CMAKE_CURRENT_SOURCE_DIR}/cmake/cmake_uninstall.cmake.in" "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake" IMMEDIATE @ONLY)
|
|
|
|
add_custom_target(uninstall COMMAND ${CMAKE_COMMAND} -P ${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake)
|
|
|
|
# enable make package - no code after this line !
|
|
include (${CMAKE_CURRENT_SOURCE_DIR}/cmake/packages.cmake)
|