mirror of
https://github.com/hyperion-project/hyperion.ng.git
synced 2023-10-10 13:36:59 +02:00
31 lines
1.3 KiB
Plaintext
31 lines
1.3 KiB
Plaintext
# Install the required tools and dependencies
|
|
sudo apt-get update
|
|
sudo apt-get install git cmake build-essential libQt4-dev libusb-1.0-0-dev python-dev
|
|
|
|
# RPI ONLY: when you build on the rapberry pi and inlcude the dispmanx grabber (which is the default)
|
|
# you also need the firmware including headers installed. This downloads the firmware from the raspberrypi github
|
|
# and copies the required files to the correct place. The firmware directory can be deleted afterwards if desired.
|
|
export FIRMWARE_DIR="raspberrypi-firmware"
|
|
git clone https://github.com/raspberrypi/firmware.git "$FIRMWARE_DIR"
|
|
sudo cp -R "$FIRMWARE_DIR/hardfp/opt/*" /opt
|
|
|
|
# create hyperion directory and checkout the code from github
|
|
export HYPERION_DIR="hyperion"
|
|
git clone --recursive https://github.com/tvdzwan/hyperion.git "$HYPERION_DIR"
|
|
|
|
# create and enter the build directory
|
|
mkdir "$HYPERION_DIR/build"
|
|
cd "$HYPERION_DIR/build"
|
|
|
|
# run cmake to generate make files on the rsapberry pi
|
|
cmake ..
|
|
# or if you are not compiling on the raspberry pi and need to disable the Dispmanx grabber and support for spi devices
|
|
cmake -DENABLE_DISPMANX=OFF -DENABLE_SPIDEV=OFF -DENABLE_X11=ON ..
|
|
|
|
# run make to build Hyperion
|
|
make
|
|
|
|
# The binaries are build in "$HYPERION_DIR/build/bin". You could copy those to /usr/bin
|
|
sudo cp ./bin/hyperion-remote /usr/bin/
|
|
sudo cp ./bin/hyperiond /usr/bin/
|