165 lines
6.6 KiB
JSON
165 lines
6.6 KiB
JSON
// Automatically generated configuration file for 'Hyperion daemon'
|
|
// Generated by: HyperCon (The Hyperion deamon configuration file builder)
|
|
// Created with HyperCon V1.00.0 (11.03.2016)
|
|
|
|
{
|
|
/// Device configuration contains the following fields:
|
|
/// * 'name' : The user friendly name of the device (only used for display purposes)
|
|
/// * 'type' : The type of the device or leds (known types for now are
|
|
/// APA102, Adalight, AdalightAPA102, AmbiLed, Atmo, Hyperion-USBASP-WS2801, Hyperion-USBASP-WS2812, Lightberry, Lightpack, LPD6803, LPD8806, Multi-Lightpack, P9813, Paintpack, PhilipsHUE, PiBlaster, SEDU, Test, ThinkerForge, TPM2, WS2801, WS2812b, None)
|
|
/// * [device type specific configuration]
|
|
/// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.).
|
|
///
|
|
/// * 'Specific for AtmoOrb:
|
|
/// * 'transitiontime' : Set the time of transition between color of Orb (not implemented)
|
|
/// * 'port' : Multicast UDP port
|
|
/// * 'numLeds' : Number of leds in Orb
|
|
/// * 'orbIds' : The Orb ids to use
|
|
/// * 'switchOffOnBlack': Define if Orb is to switch off when black is detected
|
|
"device" :
|
|
{
|
|
"name" : "MyPi",
|
|
"type" : "atmoorb",
|
|
"output" : "239.15.18.2",
|
|
"transitiontime" : 0,
|
|
"port" : 49692,
|
|
"numLeds" : 24,
|
|
"orbIds" : "1",
|
|
"switchOffOnBlack" : true,
|
|
"colorOrder" : "rgb"
|
|
},
|
|
|
|
/// Color manipulation configuration used to tune the output colors to specific surroundings.
|
|
/// The configuration contains a list of color-transforms. Each transform contains the
|
|
/// following fields:
|
|
/// * 'id' : The unique identifier of the color transformation (eg 'device_1') /// * 'leds' : The indices (or index ranges) of the leds to which this color transform applies
|
|
/// (eg '0-5, 9, 11, 12-17'). The indices are zero based. /// * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following
|
|
/// tuning parameters:
|
|
/// - 'saturationGain' The gain adjustement of the saturation
|
|
/// - 'valueGain' The gain adjustement of the value
|
|
/// * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue color domain with the
|
|
/// following tuning parameters for each channel:
|
|
/// - 'threshold' The minimum required input value for the channel to be on
|
|
/// (else zero)
|
|
/// - 'gamma' The gamma-curve correction factor
|
|
/// - 'blacklevel' The lowest possible value (when the channel is black)
|
|
/// - 'whitelevel' The highest possible value (when the channel is white)
|
|
///
|
|
/// Next to the list with color transforms there is also a smoothing option.
|
|
/// * 'smoothing' : Smoothing of the colors in the time-domain with the following tuning
|
|
/// parameters:
|
|
/// - 'type' The type of smoothing algorithm ('linear' or 'none')
|
|
/// - 'time_ms' The time constant for smoothing algorithm in milliseconds
|
|
/// - 'updateFrequency' The update frequency of the leds in Hz
|
|
/// - 'updateDelay' The delay of the output to leds (in periods of smoothing)
|
|
"color" :
|
|
{
|
|
"transform" :
|
|
[
|
|
{
|
|
"id" : "default",
|
|
"leds" : "*",
|
|
"hsv" :
|
|
{
|
|
"saturationGain" : 1.0000,
|
|
"valueGain" : 1.0000
|
|
},
|
|
"red" :
|
|
{
|
|
"threshold" : 0.0000,
|
|
"gamma" : 2.2000,
|
|
"blacklevel" : 0.0000,
|
|
"whitelevel" : 1.0000
|
|
},
|
|
"green" :
|
|
{
|
|
"threshold" : 0.0000,
|
|
"gamma" : 2.2000,
|
|
"blacklevel" : 0.0000,
|
|
"whitelevel" : 1.0000
|
|
},
|
|
"blue" :
|
|
{
|
|
"threshold" : 0.0000,
|
|
"gamma" : 2.2000,
|
|
"blacklevel" : 0.0000,
|
|
"whitelevel" : 1.0000
|
|
}
|
|
}
|
|
],
|
|
"smoothing" :
|
|
{
|
|
"type" : "linear",
|
|
"time_ms" : 100,
|
|
"updateFrequency" : 60.0000,
|
|
"updateDelay" : 0
|
|
}
|
|
},
|
|
|
|
/// The black border configuration, contains the following items:
|
|
/// * enable : true if the detector should be activated
|
|
/// * threshold : Value below which a pixel is regarded as black (value between 0.0 and 1.0)
|
|
/// * unknownFrameCnt : Number of frames without any detection before the border is set to 0 (default 600)
|
|
/// * borderFrameCnt : Number of frames before a consistent detected border gets set (default 50)
|
|
/// * maxInconsistentCnt : Number of inconsistent frames that are ignored before a new border gets a chance to proof consistency
|
|
/// * blurRemoveCnt : Number of pixels that get removed from the detected border to cut away blur (default 1)
|
|
/// * mode : Border detection mode (values=default,classic,osd)
|
|
"blackborderdetector" :
|
|
{
|
|
"enable" : false,
|
|
"threshold" : 0.01,
|
|
"unknownFrameCnt" : 600,
|
|
"borderFrameCnt" : 50,
|
|
"maxInconsistentCnt" : 10,
|
|
"blurRemoveCnt" : 1,
|
|
"mode" : "default"
|
|
},
|
|
|
|
/// The configuration of the effect engine, contains the following items:
|
|
/// * paths : An array with absolute location(s) of directories with effects
|
|
/// * color : Set static color after boot -> set effect to "" (empty) and input the values [R,G,B] and set duration_ms NOT to 0 (use 1) instead
|
|
/// * effect : The effect selected as 'boot sequence'
|
|
/// * duration_ms : The duration of the selected effect (0=endless)
|
|
/// * priority : The priority of the selected effect/static color (default=990) HINT: lower value result in HIGHER priority!
|
|
"effects" :
|
|
{
|
|
"paths" :
|
|
[
|
|
"/opt/hyperion/effects"
|
|
]
|
|
},
|
|
|
|
/// The configuration of the Json server which enables the json remote interface
|
|
/// * port : Port at which the json server is started
|
|
"jsonServer" :
|
|
{
|
|
"port" : 19446
|
|
},
|
|
|
|
/// The configuration of the Proto server which enables the protobuffer remote interface
|
|
/// * port : Port at which the protobuffer server is started
|
|
"protoServer" :
|
|
{
|
|
"port" : 19447
|
|
},
|
|
|
|
/// The configuration for each individual led. This contains the specification of the area
|
|
/// averaged of an input image for each led to determine its color. Each item in the list
|
|
/// contains the following fields:
|
|
/// * index: The index of the led. This determines its location in the string of leds; zero
|
|
/// being the first led.
|
|
/// * hscan: The fractional part of the image along the horizontal used for the averaging
|
|
/// (minimum and maximum inclusive)
|
|
/// * vscan: The fractional part of the image along the vertical used for the averaging
|
|
/// (minimum and maximum inclusive)
|
|
"leds" :
|
|
[
|
|
{
|
|
"index" : 0,
|
|
"hscan" : { "minimum" : 0.0000, "maximum" : 1.0000 },
|
|
"vscan" : { "minimum" : 0.0000, "maximum" : 1.0000 }
|
|
}
|
|
],
|
|
|
|
"endOfJson" : "endOfJson"
|
|
} |