1
0
mirror of https://github.com/azlux/log2ram.git synced 2023-10-10 13:37:24 +02:00
ramlog like for systemd (Put log into a ram folder)
Go to file
StuartIanNaylor f86c90f9d6 clean up
2019-03-09 00:24:14 +00:00
install.sh Add zram functionality 2019-03-08 04:58:06 +00:00
LICENSE Update 2017-04-12 13:28:56 +02:00
log2ram clean up 2019-03-09 00:24:14 +00:00
log2ram.conf Add zram functionality 2019-03-08 04:58:06 +00:00
log2ram.hourly Use env instead of /bin/sh 2018-02-16 01:03:18 +01:00
log2ram.logrotate Removed unneeded postrotate support 2017-12-29 10:15:43 +01:00
log2ram.service systemd conflict zram-swap-config 2019-03-08 18:21:27 +00:00
README.md timeout added 2018-07-18 21:24:43 +02:00
uninstall.sh Add zram functionality 2019-03-08 04:58:06 +00:00

Log2Ram

Like ramlog for systemd (on debian 8 jessie for example).

Usefull for RaspberryPi for not writing on the SD card all the time. You need it because your SD card doesn't want to suffer anymore!

Explanations: The script creates a /var/log mount point in RAM. So any writing of the log to the /var/log folder will not actually be written to disk (in this case to the sd card for a raspberry card) but directly to RAM. By default, every hour, the CRON will launch a synchronization of the RAM to the folder located on the physical disk. The script will also make this copy of RAM to disk in case of machine shutdown (but cannot do it in case of power failure). This way you avoid excessive writing on the SD card.

The script log2ram can work on every linux system. So you can use it with your own daemon manager if you don't have systemd.

Log2Ram is based on transient log for Systemd here : A transient /var/log


Menu

  1. Install
  2. Upgrade
  3. Customize
  4. It is working ?
  5. Uninstall

Install

curl -Lo log2ram.tar.gz https://github.com/azlux/log2ram/archive/master.tar.gz
tar xf log2ram.tar.gz
cd log2ram-master
chmod +x install.sh && sudo ./install.sh
cd ..
rm -r log2ram-master

REBOOT before installing anything else (for example apache2)

Upgrade

You need to stop log2ram (service log2ram stop) and start the install.

Customize

variables :

In the file /etc/log2ram.conf, there are three variables:

  • SIZE: defines the size the log folder will reserve into the RAM (default is 40M).
  • USE_RSYNC: Can be set to true if you prefer ´rsync´ rather than ´cp´. I use the command cp -u and rsync -X, I don't copy the all folder every time for optimization.
  • MAIL: Disables the error system mail if there is not enough place on RAM (if set to false)

refresh time:

By default Log2Ram writes to the HardDisk every hour. If you think this is too much, you can make the write every day by moving the cron file to daily: sudo mv /etc/cron.hourly/log2ram /etc/cron.daily/log2ram.

It is working?

You can now check the mount folder in ram with (You will see lines with log2ram if working)

# df -h
…
log2ram          40M  532K   40M   2% /var/log
…

# mount
…
log2ram on /var/log type tmpfs (rw,nosuid,nodev,noexec,relatime,size=40960k,mode=755)
…

If you have issue with apache2, you can try to add apache2.service next to other services on the Before parameter in /etc/systemd/system/log2ram.service it will solve the pb

The log for log2ram will be written at: /var/log/log2ram.log

Now, muffins for everyone!

Uninstall :(

(Because sometime we need it)

chmod +x /usr/local/bin/uninstall-log2ram.sh && sudo /usr/local/bin/uninstall-log2ram.sh