1
0
mirror of https://github.com/node-red/node-red-nodes.git synced 2023-10-10 13:36:58 +02:00
node-red-nodes/io/serialport/locales/en-US/25-serial.html

57 lines
4.0 KiB
HTML
Raw Normal View History

2021-03-12 14:17:23 +01:00
<script type="text/html" data-help-name="serial in">
<p>Reads data from a local serial port.</p>
<p>Can either <ul><li>wait for a "split" character (default \n). Also accepts hex notation (0x0d).</li>
<li>Wait for a timeout in milliseconds from the first character received</li>
<li>Wait to fill a fixed sized buffer</li></ul></p>
<p>It then outputs <code>msg.payload</code> as either a UTF8 ascii string or a binary Buffer object.</p>
<p><code>msg.port</code> is set to the name of the port selected.</p>
<p>If no split character is specified, or a timeout or buffer size of 0, then a stream of single characters
is sent - again either as ascii chars or size 1 binary buffers.</p>
</script>
<script type="text/html" data-help-name="serial out">
<p>Provides a connection to an outbound serial port.</p>
<p>Only the <code>msg.payload</code> is sent.</p>
<p>Optionally the baudrate can be changed using <code>msg.baudrate</code></p>
<p>Optionally the new line character used to split the input can be appended to every message sent out to the serial port.</p>
<p>Binary payloads can be sent by using a Buffer object.</p>
</script>
<script type="text/html" data-help-name="serial request">
<p>Provides a connection to a request/response serial port.</p>
<p>This node behaves as a tightly coupled combination of <code>serial in</code> and <code>serial out</code> nodes,
with which it shares the configuration.</p>
<p>Send the request message in <code>msg.payload</code> as you would do with a <code>serial out</code> node.
The message will be forwarded to the serial port following a strict FIFO (First In, First Out) queue, waiting for a single response before transmitting the next request.
Once a response is received (with the same logic of a <code>serial in</code> node), or after a timeout occurs, a message is sent to the output (see Outputs below),
with <code>msg.payload</code> containing the received response (or missing in case if timeout) and all other fields preserved.</p>
<p>For consistency with the <code>serial in</code> node, <code>msg.port</code> is set to the name of the port selected.</p>
<h3>Inputs</h3>
<ul>
<li>
<code>msg.timeout</code> is the timeout (in ms) after which the incoming message is propagated to the output with <code>msg.status</code> set to <code>"ERR_TIMEOUT"</code> and missing payload.
If not present, the default value is 10000 (10s).
</li>
<li><code>msg.count</code> if set this will override the configured number of characters as long as it is less than the number configured.</li>
<li><code>msg.waitfor</code> single character, escape code, or hex code. If set, the node will wait until it matches that character in the stream and then start the output.</li>
<li>Optionally the baudrate can be changed using <code>msg.baudrate</code></li>
</ul>
<h3>Outputs</h3>
<ul>
<li><code>msg.payload</code> is the response. If no response occured, this field is removed.</li>
<li><code>msg.status</code> is <code>"OK"</code> in case a response is received, or <code>"ERR_TIMEOUT"</code> if a timeout occurs.</li>
<li>Any other field coming from the input will be preserved.</li>
</ul>
</script>
<script type="text/html" data-help-name="serial-port">
<p>Provides configuration options for a serial port.</p>
<p>The search button should return a list of available serial ports to choose from, or you
can type in the location if known.</p>
<p>The DTR, RTS, CTS and DSR switches can be used to permanently pull the corresponding flow control pin high or low, e.g. in order to power devices via those pins.</p>
<p>The node can optionally wait until it matches a pre-defined character.
The data can then be split on a fixed character, after a timeout, or after a fixed number of characters.</p>
<p>If using a character, it can be specified as either the character, the escaped shortcut (e.g. \n), or the hex code (e.g. 0x0d).</p>
</script>