diff --git a/hardware/LEDborg/78-ledborg.html b/hardware/LEDborg/78-ledborg.html
index d7f809b8..f0b4acff 100644
--- a/hardware/LEDborg/78-ledborg.html
+++ b/hardware/LEDborg/78-ledborg.html
@@ -1,5 +1,5 @@
 <!--
-  Copyright 2013 IBM Corp.
+  Copyright 2013,2015 IBM Corp.
 
   Licensed under the Apache License, Version 2.0 (the "License");
   you may not use this file except in compliance with the License.
@@ -25,15 +25,15 @@
 <script type="text/x-red" data-help-name="ledborg">
     <p>PiBorg LedBorg LED output node. Expects a <b>msg.payload</b> with a three digit rgb triple, from <b>000</b> to <b>222</b>.</p>
     <p>See <i><a href="http://www.piborg.com/ledborg/install" target="_new">the PiBorg site</a></i> for more information.</p>
-    <p>You can also use a <b>msg.payload</b> in the standard hex format "#rrggbb". The clip levels are :</p>
-    <p><pre>0x00 - 0x57 = off<br/>0x58 - 0xA7 = 50%<br/>0xA8 - 0xFF = fully on</pre></p>
+    <p>You can also use a <b>msg.payload</b> in the standard hex format "#rrggbb".</p>
     <p>You can also use the @cheerlight colour names - red, amber, green, blue, cyan, magenta, yellow, orange, pink, purple,
        white, warmwhite, black</p>
+    <p>You may also supply a comma seperated rrr,ggg,bbb where the value can be between 0 and 255.</p>
 </script>
 
 <script type="text/javascript">
     RED.nodes.registerType('ledborg',{
-        category: 'Rapsberry Pi',
+        category: 'Raspberry Pi',
         color:"GoldenRod",
         defaults: {
             name: {value:""}
diff --git a/hardware/LEDborg/78-ledborg.js b/hardware/LEDborg/78-ledborg.js
index ee43ca9d..f928e2fa 100644
--- a/hardware/LEDborg/78-ledborg.js
+++ b/hardware/LEDborg/78-ledborg.js
@@ -1,5 +1,5 @@
 /**
- * Copyright 2013 IBM Corp.
+ * Copyright 2013,2015 IBM Corp.
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
@@ -16,33 +16,63 @@
 
 module.exports = function(RED) {
     "use strict";
-    var util =  require('util');
+    var util = require("util");
+    var exec = require('child_process').exec;
+    var spawn = require('child_process').spawn;
     var fs =  require('fs');
 
-    // check if /dev/ledborg exists - if not then don't even show the node.
-    if (!fs.existsSync("/dev/ledborg")) {
-        throw "Info : PiBorg hardware : LedBorg not found";
+    var gpioCommand = __dirname+'/nrgpio';
+
+    if (!fs.existsSync("/dev/ttyAMA0")) { // unlikely if not on a Pi
+        //util.log("Info : Ignoring Raspberry Pibrella specific node.");
+        throw "Info : Ignoring Raspberry Pibrella specific node.";
     }
 
+    if (!fs.existsSync("/usr/share/doc/python-rpi.gpio")) {
+        util.log("[rpi-pibrella] Info : Can't find RPi.GPIO python library.");
+        throw "Warning : Can't find RPi.GPIO python library.";
+    }
+
+    if ( !(1 & parseInt ((fs.statSync(gpioCommand).mode & parseInt ("777", 8)).toString (8)[0]) )) {
+        util.log("[rpi-pibrella] Error : "+gpioCommand+" needs to be executable.");
+        throw "Error : nrgpio must to be executable.";
+    }
+
+    // GPIO pins 11 (R), 13 (G), 15 (B).
+
     function LedBorgNode(n) {
         RED.nodes.createNode(this,n);
-        var p1 = /^[0-2][0-2][0-2]$/
-        var p2 = /^\#[A-Fa-f0-9]{6}$/
         var node = this;
 
-        this.on("input", function(msg) {
+        RED.nodes.createNode(this,n);
+        this.pin = n.pin;
+        this.set = n.set || false;
+        this.level = n.level || 0;
+        this.out = n.out || "out";
+        var node = this;
+        var p1 = /^[0-2][0-2][0-2]$/
+        var p2 = /^\#[A-Fa-f0-9]{6}$/
+        var p3 = /^\d+,\d+,\d+$/
+
+        function inputlistener(msg) {
+            var rgb = "000";
+
             if (p1.test(msg.payload)) {
-                fs.writeFile('/dev/ledborg', msg.payload, function (err) {
-                    if (err) { node.warn(msg.payload+" : No LedBorg found"); }
-                });
+                rgb = msg.payload;
+                rgb = Number(rgb[0])*50+","+Number(rgb[1])*50+","+Number(rgb[2])*50;
             }
             else if (p2.test(msg.payload)) {
-                var r = Math.floor(parseInt(msg.payload.slice(1,3),16)/88).toString();
-                var g = Math.floor(parseInt(msg.payload.slice(3,5),16)/88).toString();
-                var b = Math.floor(parseInt(msg.payload.slice(5),16)/88).toString();
-                fs.writeFile('/dev/ledborg', r+g+b, function (err) {
-                    if (err) { node.warn(r+g+b+" : No LedBorg found"); }
-                });
+                var r = Math.floor(parseInt(msg.payload.slice(1,3),16)*100/256).toString();
+                var g = Math.floor(parseInt(msg.payload.slice(3,5),16)*100/256).toString();
+                var b = Math.floor(parseInt(msg.payload.slice(5),16)*100/256).toString();
+                rgb = r+","+g+","+b;
+            }
+            else if (p3.test(msg.payload)) {
+                var c = msg.payload.split(",");
+                var r = Math.floor(parseInt(c[0])*100/256).toString();
+                var g = Math.floor(parseInt(c[1])*100/256).toString();
+                var b = Math.floor(parseInt(c[2])*100/256).toString();
+                rgb = r+","+g+","+b;
             }
             else {
                 // you can add fancy colours by name here if you want...
@@ -50,16 +80,59 @@ module.exports = function(RED) {
                 var colors = {"red":"200","green":"020","blue":"002","cyan":"022","white":"222","pink":"201",
                     "warmwhite":"221","purple":"101","magenta":"202","yellow":"220","amber":"220","orange":"210","black":"000"}
                 if (msg.payload.toLowerCase() in colors) {
-                    var c = colors[msg.payload.toLowerCase()];
-                    fs.writeFile('/dev/ledborg', c, function (err) {
-                        if (err) { node.warn(msg.payload+" : No LedBorg found"); }
-                    });
+                    rgb = colors[msg.payload.toLowerCase()];
+                    rgb = Number(rgb[0])*50+","+Number(rgb[1])*50+","+Number(rgb[2])*50;
                 }
                 else {
                     node.warn("Invalid LedBorg colour code");
                 }
             }
+
+            if (RED.settings.verbose) { node.log("out: "+msg.payload); }
+            if (node.child !== null) { node.child.stdin.write(rgb+"\n"); }
+            else { node.warn("Command not running"); }
+            node.status({fill:"green",shape:"dot",text:msg.payload});
+        }
+
+        node.child = spawn(gpioCommand, ["borg","11"]);
+        node.running = true;
+        node.status({fill:"green",shape:"dot",text:"OK"});
+
+        node.on("input", inputlistener);
+
+        node.child.stdout.on('data', function (data) {
+            if (RED.settings.verbose) { node.log("out: "+data+" :"); }
         });
+
+        node.child.stderr.on('data', function (data) {
+            if (RED.settings.verbose) { node.log("err: "+data+" :"); }
+        });
+
+        node.child.on('close', function (code) {
+            node.child = null;
+            node.running = false;
+            node.status({fill:"red",shape:"circle",text:""});
+            if (RED.settings.verbose) { node.log("closed"); }
+            if (node.done) { node.done(); }
+        });
+
+        node.child.on('error', function (err) {
+            if (err.errno === "ENOENT") { node.warn('Command not found'); }
+            else if (err.errno === "EACCES") { node.warn('Command not executable'); }
+            else { node.log('error: ' + err); }
+        });
+
+        node.on("close", function(done) {
+            node.status({fill:"red",shape:"circle",text:""});
+            if (node.child != null) {
+                node.done = done;
+                node.child.stdin.write(" close 11");
+                node.child.kill('SIGKILL');
+            }
+            else { done(); }
+
+        });
+
     }
     RED.nodes.registerType("ledborg",LedBorgNode);
 }
diff --git a/hardware/LEDborg/nrgpio b/hardware/LEDborg/nrgpio
new file mode 100755
index 00000000..88b381a7
--- /dev/null
+++ b/hardware/LEDborg/nrgpio
@@ -0,0 +1,16 @@
+#
+# Copyright 2014 IBM Corp.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# http://www.apache.org/licenses/LICENSE-2.0
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+BASEDIR=$(dirname $0)
+sudo python -u $BASEDIR/nrgpio.py $@
diff --git a/hardware/LEDborg/nrgpio.py b/hardware/LEDborg/nrgpio.py
new file mode 100755
index 00000000..414f5fc5
--- /dev/null
+++ b/hardware/LEDborg/nrgpio.py
@@ -0,0 +1,199 @@
+#!/usr/bin/python
+#
+# Copyright 2014 IBM Corp.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# http://www.apache.org/licenses/LICENSE-2.0
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# Import library functions we need
+import RPi.GPIO as GPIO
+import sys
+
+bounce = 20     # bounce time in mS to apply
+
+if len(sys.argv) > 1:
+    cmd = sys.argv[1].lower()
+    pin = int(sys.argv[2])
+    GPIO.setmode(GPIO.BOARD)
+    GPIO.setwarnings(False)
+
+    if cmd == "pwm":
+        #print "Initialised pin "+str(pin)+" to PWM"
+        GPIO.setup(pin,GPIO.OUT)
+        p = GPIO.PWM(pin, 100)
+        p.start(0)
+
+        while True:
+            try:
+                data = raw_input()
+                if data == "close":
+                    GPIO.cleanup(pin)
+                    sys.exit(0)
+                p.ChangeDutyCycle(float(data))
+            except EOFError:        # hopefully always caused by us sigint'ing the program
+                GPIO.cleanup(pin)
+                sys.exit(0)
+            except Exception as ex:
+                print "bad data: "+data
+
+    elif cmd == "buzz":
+        #print "Initialised pin "+str(pin)+" to Buzz"
+        GPIO.setup(pin,GPIO.OUT)
+        p = GPIO.PWM(pin, 100)
+        p.stop()
+
+        while True:
+            try:
+                data = raw_input()
+                if data == "close":
+                    GPIO.cleanup(pin)
+                    sys.exit(0)
+                elif float(data) == 0:
+                    p.stop()
+                else:
+                    p.start(50)
+                    p.ChangeFrequency(float(data))
+            except EOFError:        # hopefully always caused by us sigint'ing the program
+                GPIO.cleanup(pin)
+                sys.exit(0)
+            except Exception as ex:
+                print "bad data: "+data
+
+    elif cmd == "out":
+        #print "Initialised pin "+str(pin)+" to OUT"
+        GPIO.setup(pin,GPIO.OUT)
+        if len(sys.argv) == 4:
+            GPIO.output(pin,int(sys.argv[3]))
+
+        while True:
+            try:
+                data = raw_input()
+                if data == "close":
+                    GPIO.cleanup(pin)
+                    sys.exit(0)
+                data = int(data)
+            except EOFError:        # hopefully always caused by us sigint'ing the program
+                GPIO.cleanup(pin)
+                sys.exit(0)
+            except:
+                data = 0
+            if data != 0:
+                data = 1
+            GPIO.output(pin,data)
+
+    elif cmd == "in":
+        #print "Initialised pin "+str(pin)+" to IN"
+        def handle_callback(chan):
+            print GPIO.input(chan)
+
+        if len(sys.argv) == 4:
+            if sys.argv[3].lower() == "up":
+                GPIO.setup(pin,GPIO.IN,GPIO.PUD_UP)
+            elif sys.argv[3].lower() == "down":
+                GPIO.setup(pin,GPIO.IN,GPIO.PUD_DOWN)
+            else:
+                GPIO.setup(pin,GPIO.IN)
+        else:
+            GPIO.setup(pin,GPIO.IN)
+        print GPIO.input(pin)
+        GPIO.add_event_detect(pin, GPIO.BOTH, callback=handle_callback, bouncetime=bounce)
+
+        while True:
+            try:
+                data = raw_input()
+                if data == "close":
+                    GPIO.cleanup(pin)
+                    sys.exit(0)
+            except EOFError:        # hopefully always caused by us sigint'ing the program
+                GPIO.cleanup(pin)
+                sys.exit(0)
+
+    elif cmd == "byte":
+        #print "Initialised BYTE mode - "+str(pin)+
+        list = [7,11,13,12,15,16,18,22]
+        GPIO.setup(list,GPIO.OUT)
+
+        while True:
+            try:
+                data = raw_input()
+                if data == "close":
+                    GPIO.cleanup()
+                    sys.exit(0)
+                data = int(data)
+            except EOFError:        # hopefully always caused by us sigint'ing the program
+                GPIO.cleanup()
+                sys.exit(0)
+            except:
+                data = 0
+            for bit in range(8):
+                if pin == 1:
+                    mask = 1 << (7 - bit)
+                else:
+                    mask = 1 << bit
+                GPIO.output(list[bit], data & mask)
+
+    elif cmd == "borg":
+        #print "Initialised BORG mode - "+str(pin)+
+        GPIO.setup(11,GPIO.OUT)
+        GPIO.setup(13,GPIO.OUT)
+        GPIO.setup(15,GPIO.OUT)
+        r = GPIO.PWM(11, 100)
+        g = GPIO.PWM(13, 100)
+        b = GPIO.PWM(15, 100)
+        r.start(0)
+        g.start(0)
+        b.start(0)
+
+        while True:
+            try:
+                data = raw_input()
+                if data == "close":
+                    GPIO.cleanup()
+                    sys.exit(0)
+                c = data.split(",")
+                r.ChangeDutyCycle(float(c[0]))
+                g.ChangeDutyCycle(float(c[1]))
+                b.ChangeDutyCycle(float(c[2]))
+            except EOFError:        # hopefully always caused by us sigint'ing the program
+                GPIO.cleanup()
+                sys.exit(0)
+            except:
+                data = 0
+
+    elif cmd == "rev":
+        print GPIO.RPI_REVISION
+
+    elif cmd == "ver":
+        print GPIO.VERSION
+
+    elif cmd == "mouse":  # catch mice button events
+        file = open( "/dev/input/mice", "rb" )
+        oldbutt = 0
+
+        def getMouseEvent():
+          global oldbutt
+          global pin
+          buf = file.read(3)
+          pin = pin & 0x07
+          button = ord( buf[0] ) & pin # mask out just the required button(s)
+          if button != oldbutt:  # only send if changed
+              oldbutt = button
+              print button
+
+        while True:
+            try:
+                getMouseEvent()
+            except:
+                file.close()
+                sys.exit(0)
+
+else:
+    print "Bad parameters - {in|out|pwm} {pin} {value|up|down}"
diff --git a/hardware/LEDborg/package.json b/hardware/LEDborg/package.json
index fc7919d1..f771e96a 100644
--- a/hardware/LEDborg/package.json
+++ b/hardware/LEDborg/package.json
@@ -1,6 +1,6 @@
 {
     "name"          : "node-red-node-ledborg",
-    "version"       : "0.0.2",
+    "version"       : "0.0.3",
     "description"   : "A Node-RED node to control a PiBorg LedBorg board for a Raspberry Pi.",
     "dependencies"  : {
     },