From 5316ff715ca88ba146be0a50c5893d74003bc354 Mon Sep 17 00:00:00 2001 From: Dave Conway-Jones Date: Thu, 24 Sep 2015 19:00:27 +0100 Subject: [PATCH] Fix spelling in Intel Galileo node READme --- hardware/intel/README.md | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/hardware/intel/README.md b/hardware/intel/README.md index d8671658..46e92033 100644 --- a/hardware/intel/README.md +++ b/hardware/intel/README.md @@ -18,7 +18,7 @@ Usage The Galileo or Edison must already be running Linux, and have Node-RED installed. See the [Intel Downloads](https://software.intel.com/en-us/iot/home) for -hardware / downloads for you particular board. +hardware / downloads for your particular board. Ensure the latest version of mraa libraries are installed: (version 1.5 as of Sept 2015) @@ -36,21 +36,21 @@ If you do need to install Node-RED, you can do this as follows from the home dir cd .node-red npm install node-red-node-intel-gpio -###Analogue Input Node +### Analogue Input Node Monitors the selected pin for changes. It outputs on a change of value. As analogue inputs are continously changing you can set the sample rate in ms from 20 to 65535. -###Digital Input Node +### Digital Input Node Monitors the selected pin for changes. It only outputs on a change of value. -###Digital Output Node +### Digital Output Node Sets the selected digital pin output high or low depending on the value of **msg.payload** - expects a number or string 0 or 1. -###Pulse Width Modulation (PWM) Node +### Pulse Width Modulation (PWM) Node The **msg.payload** should contain a floating point number value between 0 (off) and 1 (fully on), or a string representation thereof. @@ -63,7 +63,7 @@ For servo control set the period to 20mS and vary the input between 0.05 and 0.1 0.75 = 7.5% of 20mS = 1.5mS - typical servo centre point 0.10 = 10% of 20mS = 2mS -###Example +### Example Simple flow to blink Pin 13