From 5c322cfd577b7566a2b990d5e43a208a96b53be6 Mon Sep 17 00:00:00 2001 From: Dave Conway-Jones Date: Wed, 10 Jul 2019 09:52:31 +0100 Subject: [PATCH] Add missing language files bump package --- hardware/PiGpio/locales/de/36-rpi-gpio.json | 72 +++++++++++++++++++++ hardware/PiGpio/locales/ja/36-rpi-gpio.json | 72 +++++++++++++++++++++ hardware/PiGpio/locales/ko/36-rpi-gpio.json | 72 +++++++++++++++++++++ hardware/PiGpio/package.json | 2 +- 4 files changed, 217 insertions(+), 1 deletion(-) create mode 100644 hardware/PiGpio/locales/de/36-rpi-gpio.json create mode 100644 hardware/PiGpio/locales/ja/36-rpi-gpio.json create mode 100644 hardware/PiGpio/locales/ko/36-rpi-gpio.json diff --git a/hardware/PiGpio/locales/de/36-rpi-gpio.json b/hardware/PiGpio/locales/de/36-rpi-gpio.json new file mode 100644 index 00000000..958a82b6 --- /dev/null +++ b/hardware/PiGpio/locales/de/36-rpi-gpio.json @@ -0,0 +1,72 @@ +"rpi-gpio" : { + "label" : { + "gpiopin" : "GPIO", + "selectpin" : "Auswahlstift", + "resistor" : "Widerstand?", + "readinitial" : "Anfangsstatus des Pins bei Implementierung/Neustart lesen?", + "type" : "Typ", + "initpin" : "Pin-Status initialisieren?", + "debounce" : "Debounce", + "freq" : "Frequenz", + "button" : "Knopf", + "pimouse" : "Pi-Maus", + "pikeyboard" : "Pi-Tastatur", + "left" : "Links", + "right" : "Rechts", + "middle" : "Mitte" + }, + "resistor" : { + "none" : "keine", + "pullup" : "pullup", + "pulldown" : "Pulldown" + }, + "digout" : "Digitale Ausgabe", + "pwmout" : "PWM-Ausgabe", + "servo" : "Servo-Ausgabe", + "initpin0" : "Anfangsstand des Pin-Niedrig (0)", + "initpin1" : "Anfangsebene von Pin-High (1)", + "left" : "links", + "right" : "rechts", + "middle" : "Mitte", + "any" : "beliebig", + "pinname" : "Pin", + "alreadyuse" : "bereits im Gebrauch", + "alreadyset" : "bereits festgelegt als", + "tip" : { + "pin" : " Verwender Pins : ", + "in" : "Tipp: Es wird nur die digitale Eingabe unterstützt. Die Eingabe muss 0 oder 1 sein.", + "dig" : "Tipp: Für die digitale Ausgabe muss der Wert 0 oder 1 sein.", + "pwm" : "Tipp: Für die PWM-Ausgabe muss der Wert zwischen 0 und 100 liegen; die Einstellung der Hochfrequenz kann mehr CPU beanspruchen als erwartet.", + "ser" : " Tipp : Für die Servo-Ausgabe muss ein Wert zwischen 0 und 100 eingegeben werden. 50 ist das Zentrum." + }, + "types" : { + "digout" : "digitale Ausgabe", + "input" : "Eingabe", + "pullup" : "Eingabe mit Pull-up", + "pulldown" : "Eingabe mit Pull-down", + "pwmout" : "PWM-Ausgabe", + "servo" : "Servo-Ausgabe" + }, + "status" : { + "stopped" : "Gestoppt", + "closed" : "geschlossen", + "not-running" : "nicht aktiv", + "not-available" : "nicht verfügbar", + "na" : "N/A: __Wert__" + }, + "errors" : { + "ignorenode" : "Raspberry Pi-spezifische Nodes inaktiv", + "version" : "Abrufen der Version von Pi fehlgeschlagen", + "sawpitype" : "Saw-Pi-Typ", + "libnotfound" : "Pi RPi.GPIO-Python-Bibliothek nicht gefunden", + "alreadyset" : "GPIO-Stift __pin__ ist bereits als Typ festgelegt: __type__", + "invalidpin" : "Ungültiger GPIO-Pin", + "invalidinput" : "Ungültige Eingabe", + "needtobeexecutable" : "__command__ muss ausführbar sein", + "mustbeexecutable" : "nrgpio muss ausführbar sein", + "commandnotfound" : "Befehl 'nrgpio' nicht gefunden", + "commandnotexecutable" : "nrgpio-Befehl nicht ausführbar", + "error" : "Fehler: __error__", + "pythoncommandnotfound" : "Befehl 'nrpgio python' nicht aktiv" + } + } diff --git a/hardware/PiGpio/locales/ja/36-rpi-gpio.json b/hardware/PiGpio/locales/ja/36-rpi-gpio.json new file mode 100644 index 00000000..a0f87664 --- /dev/null +++ b/hardware/PiGpio/locales/ja/36-rpi-gpio.json @@ -0,0 +1,72 @@ +"rpi-gpio": { + "label": { + "gpiopin": "GPIO", + "selectpin": "端子の選択", + "resistor": "抵抗", + "readinitial": "デプロイや再起動時に端子の初期状態を読み込む", + "type": "出力形式", + "initpin": "端子の状態を初期化", + "debounce": "デバウンス", + "freq": "頻度", + "button": "ボタン", + "pimouse": "Pi Mouse", + "pikeyboard": "Pi Keyboard", + "left": "Left", + "right": "Right", + "middle": "Middle" + }, + "resistor": { + "none": "なし", + "pullup": "プルアップ", + "pulldown": "プルダウン" + }, + "digout": "デジタル出力", + "pwmout": "PWM出力", + "servo": "サーボ出力", + "initpin0": "端子の初期レベル - Low (0)", + "initpin1": "端子の初期レベル - High (1)", + "left": "左", + "right": "右", + "middle": "中間", + "any": "全て", + "pinname": "端子", + "alreadyuse": "使用中", + "alreadyset": "設定済", + "tip": { + "pin": "使用中の端子: ", + "in": "注釈: 入力値は、0または1の数値のみ対応しています。", + "dig": "注釈: 「出力形式」として「デジタル出力」を用いる場合、入力値は0または1の数値である必要があります。", + "pwm": "注釈: 「出力形式」として「PWM出力」を用いる場合、入力値は0～100の数値である必要があります。", + "ser": "注釈: サーボ出力向け - 入力値は0～100の間である必要があります。50が中心値です。" + }, + "types": { + "digout": "デジタル出力", + "input": "入力", + "pullup": "プルアップの入力", + "pulldown": "プルダウンの入力", + "pwmout": "PWM出力", + "servo": "サーボ出力" + }, + "status": { + "stopped": "停止", + "closed": "切断", + "not-running": "停止中", + "not-available": "利用不可", + "na": "N/A : __value__" + }, + "errors": { + "ignorenode": "Raspberry Pi固有のノードを無視しました", + "version": "バージョンコマンドが失敗しました", + "sawpitype": "Saw Pi Type", + "libnotfound": "RPi.GPIO pythonライブラリを見つけられませんでした", + "alreadyset": "GPIO端子 __pin__ は既に出力形式が設定されています: __type__", + "invalidpin": "GPIO端子が不正です", + "invalidinput": "入力が不正です", + "needtobeexecutable": "__command__ は実行可能である必要があります", + "mustbeexecutable": "nrgpio は実行可能である必要があります", + "commandnotfound": "nrgpio コマンドが見つかりません", + "commandnotexecutable": "nrgpio コマンドが実行可能ではありません", + "error": "エラー: __error__", + "pythoncommandnotfound": "nrpgio python コマンドが実行されていません" + } +} diff --git a/hardware/PiGpio/locales/ko/36-rpi-gpio.json b/hardware/PiGpio/locales/ko/36-rpi-gpio.json new file mode 100644 index 00000000..e5b4fc71 --- /dev/null +++ b/hardware/PiGpio/locales/ko/36-rpi-gpio.json @@ -0,0 +1,72 @@ +"rpi-gpio": { + "label": { + "gpiopin": "GPIO", + "selectpin": "단자의 선택", + "resistor": "저항", + "readinitial": "배포나 재시작시에 단자의 초기상태를 불러옴", + "type": "출력형식", + "initpin": "단자의 상태를 초기화", + "debounce": "디바운스", + "freq": "빈도", + "button": "버튼", + "pimouse": "Pi Mouse", + "pikeyboard": "Pi Keyboard", + "left": "Left", + "right": "Right", + "middle": "Middle" + }, + "resistor": { + "none": "없음", + "pullup": "풀 업", + "pulldown": "풀 다운" + }, + "digout": "디지털 출력", + "pwmout": "PWM 출력", + "servo": "서보 출력", + "initpin0": "단자의 초기레벨 - Low (0)", + "initpin1": "단자의 초기레벨 - High (1)", + "left": "좌", + "right": "우", + "middle": "중간", + "any": "모두", + "pinname": "단자", + "alreadyuse": "사용중", + "alreadyset": "설정됨", + "tip": { + "pin": "사용중인 단자: ", + "in": "주석: 입력값은, 0 혹은 1의 수치만 대응하고 있습니다.", + "dig": "주석: ’출력형식’으로 ’디지털출력’을 사용하는 경우, 입력값은 0 혹은 1의 수치일 필요가 있습니다.", + "pwm": "주석: ’출력형식’으로 ’PWM출력’을 사용하는 경우, 입력값은 0～100의 수치일 필요가 있습니다.", + "ser": "주석: 서보 출력용 - 입력값은 0～100 사이일 필요가 있습니다. 50이 중심값입니다." + }, + "types": { + "digout": "디지털 출력", + "input": "입력", + "pullup": "풀 업 입력", + "pulldown": "풀 다운 입력", + "pwmout": "PWM 출력", + "servo": "서보 출력" + }, + "status": { + "stopped": "정지", + "closed": "절단", + "not-running": "정지중", + "not-available": "이용불가", + "na": "N/A : __value__" + }, + "errors": { + "ignorenode": "Raspberry Pi고유의 노드를 무시했습니다", + "version": "버젼커맨드에 실패했습니다", + "sawpitype": "Saw Pi Type", + "libnotfound": "RPi.GPIO python라이브러리를 발견하지 못했습니다", + "alreadyset": "GPIO단자 __pin__ 은 이미 출력형식이 설정되어 있습니다: __type__", + "invalidpin": "GPIO단자가 올바르지 않습니다", + "invalidinput": "입력이 올바르지 않습니다", + "needtobeexecutable": "__command__ 은 실행가능상태일 필요가 있습니다 ", + "mustbeexecutable": "nrgpio 은 실행가능상태일 필요가 있습니다 ", + "commandnotfound": "nrgpio 커맨드를 찾을수 없습니다", + "commandnotexecutable": "nrgpio 커맨드가 실행가능상태가 아닙니다", + "error": "에러: __error__", + "pythoncommandnotfound": "nrpgio python 커맨드가 실행되지 않았습니다" + } +} diff --git a/hardware/PiGpio/package.json b/hardware/PiGpio/package.json index f2373a58..b705fd8b 100644 --- a/hardware/PiGpio/package.json +++ b/hardware/PiGpio/package.json @@ -1,6 +1,6 @@ { "name": "node-red-node-pi-gpio", - "version": "1.0.1", + "version": "1.0.2", "description": "The basic Node-RED node for Pi GPIO", "dependencies" : { },