Add missing gpio en-US help file

hardware/PiGpio/locales/en-US/36-rpi-gpio.html

@@ -0,0 +1,75 @@
+<!--
+  Copyright JS Foundation and other contributors, http://js.foundation
+
+  Licensed under the Apache License, Version 2.0 (the "License");
+  you may not use this file except in compliance with the License.
+  You may obtain a copy of the License at
+
+  http://www.apache.org/licenses/LICENSE-2.0
+
+  Unless required by applicable law or agreed to in writing, software
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+-->
+
+<script type="text/x-red" data-help-name="rpi-gpio in">
+    <p>Raspberry Pi input node. Generates a <code>msg.payload</code> with either a
+    0 or 1 depending on the state of the input pin.</p>
+    <h3>Outputs</h3>
+    <dl class="message-properties">
+        <dt>payload <span class="property-type">number</span></dt>
+        <dd>the payload will be a 1 or a 0.</dd>
+        <dt>topic <span class="property-type">string</span></dt>
+        <dd>the topic will be set to <code>pi/{the pin number}</code>.</dd>
+    </dl>
+    <h3>Details</h3>
+    <p>You may also enable the input pullup resistor or the pulldown resistor.</p>
+    <p>Requires the RPi.GPIO python library version 0.5.10 (or better) in order to work.</p>
+</script>
+
+<script type="text/x-red" data-help-name="rpi-gpio out">
+    <p>Raspberry Pi output node. Can be used in Digital or PWM modes.</p>
+    <h3>Inputs</h3>
+    <dl class="message-properties">
+        <dt>payload <span class="property-type">number | string | boolean</span></dt>
+    </dl>
+    <h3>Details</h3>
+    <p>Digital mode - expects a <code>msg.payload</code> with either a 0 or 1 (or true or false),
+    and will set the selected physical pin high or low depending on the value passed in.</p>
+    <p>The initial value of the pin at deploy time can also be set to 0 or 1.</p>
+    <p>PWM mode - expects an input value of a number 0 - 100. It can be floating point.</p>
+    <p>PWM mode can be used to drive a servo using input values between 10 and 20 only,
+    but will accept floating point values.
+    The GPIO2 pin is best for this as it uses hardware to do the PWM. For better servo support
+    consider the alternative node-red-node-pi-gpiod node.</p>
+    <p>Requires the RPi.GPIO python library version 0.5.10 (or better) in order to work.</p>
+</script>
+
+<script type="text/x-red" data-help-name="rpi-mouse">
+    <p>Raspberry Pi mouse button node. Requires a USB mouse.</p>
+    <h3>Outputs</h3>
+    <dl class="message-properties">
+        <dt>payload <span class="property-type">number</span></dt>
+        <dd>1 or 0 when the selected mouse button is pressed and released.</dd>
+        <dt>button <span class="property-type">number</span></dt>
+        <dd>1, 2, 4 corresponding to left, right and middle buttons, so you
+        can work out which button or combination was pressed.</dd>
+        <dt>topic <span class="property-type">string</span></dt>
+        <dd>set to <code>pi/mouse</code></dd>
+    </dl>
+</script>
+
+<script type="text/x-red" data-help-name="rpi-keyboard">
+    <p>Raspberry Pi keyboard handling node. Requires a USB keyboard.</p>
+    <h3>Outputs</h3>
+    <dl class="message-properties">
+        <dt>payload <span class="property-type">number</span></dt>
+        <dd>contains the keycode value</dd>
+        <dt>action <span class="property-type">string</span></dt>
+        <dd>set to "up", "down", or "repeat"</dd>
+        <dt>topic <span class="property-type">string</span></dt>
+        <dd>set to <code>pi/key</code></dd>
+    </dl>
+</script>

hardware/PiGpio/package.json

@@ -1,6 +1,6 @@
 {
   "name": "node-red-node-pi-gpio",
-  "version": "1.0.2",
+  "version": "1.0.3",
   "description": "The basic Node-RED node for Pi GPIO",
   "dependencies"  : {
   },