From 7186ee38ff03454517e4d6c122d807d743191501 Mon Sep 17 00:00:00 2001 From: heikokue <74769863+heikokue@users.noreply.github.com> Date: Thu, 25 Mar 2021 10:36:48 +0100 Subject: [PATCH] pi-gpiod: improved/fixed EN localisation and added DE help (#778) --- hardware/pigpiod/locales/de/pi-gpiod.html | 38 ++++++++++++++++++++ hardware/pigpiod/locales/de/pi-gpiod.json | 4 +-- hardware/pigpiod/locales/en-US/pi-gpiod.html | 25 +++++++------ hardware/pigpiod/locales/en-US/pi-gpiod.json | 2 +- 4 files changed, 55 insertions(+), 14 deletions(-) create mode 100644 hardware/pigpiod/locales/de/pi-gpiod.html diff --git a/hardware/pigpiod/locales/de/pi-gpiod.html b/hardware/pigpiod/locales/de/pi-gpiod.html new file mode 100644 index 00000000..d9962ded --- /dev/null +++ b/hardware/pigpiod/locales/de/pi-gpiod.html @@ -0,0 +1,38 @@ + + + + diff --git a/hardware/pigpiod/locales/de/pi-gpiod.json b/hardware/pigpiod/locales/de/pi-gpiod.json index 1273663b..912ac260 100644 --- a/hardware/pigpiod/locales/de/pi-gpiod.json +++ b/hardware/pigpiod/locales/de/pi-gpiod.json @@ -30,7 +30,7 @@ "initpin1": "Initalzustand high (1)", "pinname": "Pin", "tip": { - "pin": "Pins in Verwendung: ", + "pin": "Pins in Verwendung: ", "in": "Nur digitaler Eingang unterstützt - Eingangszustand muss 0 oder 1 sein", "dig": "Digitaler Ausgang - Node-Eingangswert muss 0 oder 1 sein", "pwm": "PWM-Ausgang - Node-Eingangswert muss zwischen 0 und 100 sein", @@ -53,7 +53,7 @@ "errors": { "invalidpin": "Ungültiger GPIO-Pin", "invalidinput": "Ungültige Eingabe", - "error": "Fehler: __error__" + "error": "FEHLER: __error__" } } } diff --git a/hardware/pigpiod/locales/en-US/pi-gpiod.html b/hardware/pigpiod/locales/en-US/pi-gpiod.html index 471b6c10..84b017b2 100644 --- a/hardware/pigpiod/locales/en-US/pi-gpiod.html +++ b/hardware/pigpiod/locales/en-US/pi-gpiod.html @@ -4,12 +4,14 @@ 0 or 1 depending on the state of the input pin. Requires the pi-gpiod daemon to be running on the host computer in order to work.

-

Outputs -

-

Details

+

Outputs

+
+
payloadnumber
+
the level of the pin (0 or 1)
+
topicstring
+
pin number pi/{the pin number}
+
+

Details

You may also enable the input pullup resistor ↑ or the pulldown resistor ↓.

If using with Docker on Pi then the default Host IP should be 172.17.0.1. You will also need to run sudo pigpiod on the host.

Note: the pin numbers refer the physical pin numbers on connector P1 as they are easier to locate.

@@ -18,11 +20,12 @@