Tidy up gpiod node tips

hardware/pigpiod/locales/en-US/pi-gpiod.json

@@ -30,10 +30,10 @@
         "pinname": "Pin",
         "tip": {
             "pin": "<b>Pins in Use</b>: ",
-            "in": "<b>Tip</b>: Only Digital Input is supported - input must be 0 or 1.",
+            "in": "Only Digital Input is supported - input must be 0 or 1.",
-            "dig": "<b>Tip</b>: For digital output - input must be 0 or 1.",
+            "dig": "Digital output - input must be 0 or 1.",
-            "pwm": "<b>Tip</b>: For PWM output - input must be between 0 to 100.",
+            "pwm": "PWM output - input must be between 0 to 100.",
-            "ser": "<b>Tip</b>: For Servo output - input must be between 0 to 100. 50 is centre.<br/>Min must be 500uS or more, Max must be 2500uS or less."
+            "ser": "Servo output - input must be between 0 to 100. 50 is centre.<br/>Min must be 500uS or more, Max must be 2500uS or less."
         },
         "types": {
             "digout": "digital output",

hardware/pigpiod/package.json

@@ -1,6 +1,6 @@
 {
   "name": "node-red-node-pi-gpiod",
-  "version": "0.0.8",
+  "version": "0.0.9",
   "description": "A node-red node for PiGPIOd",
   "dependencies"  : {
       "js-pigpio": "*"

hardware/pigpiod/pi-gpiod.html

@@ -163,9 +163,9 @@
         <label for="node-input-name"><i class="fa fa-tag"></i> <span data-i18n="node-red:common.label.name"></span></label>
         <input type="text" id="node-input-name" data-i18n="[placeholder]node-red:common.label.name">
     </div>
+    <div class="form-tips"><span data-i18n="[html]pi-gpiod.tip.in"></span></div>
     <div class="form-tips" id="pin-tip">Pins marked in blue are dual use. Make sure they are not enabled for
     their other use before using as GPIO.</div>
-    <div class="form-tips"><span data-i18n="[html]pi-gpiod.tip.in"></span></div>
 </script>
 
 <script type="text/x-red" data-help-name="pi-gpiod in">
@@ -180,7 +180,7 @@
     </ul>
     <p><b>Details</b></p>
     <p>You may also enable the input pullup resistor &uarr; or the pulldown resistor &darr;.</p>
-    <p>If using with Docker on Pi then the default Host IP should be `172.17.0.1`. You will also need to run `sudo pigpiod` on the host.</p>
+    <p>If using with Docker on Pi then the default Host IP should be <code>172.17.0.1</code>. You will also need to run <code>sudo pigpiod</code> on the host.</p>
     <p><b>Note:</b> the pin numbers refer the physical pin numbers on connector P1 as they are easier to locate.</p>
     </script>
 
@@ -408,11 +408,11 @@
         <label for="node-input-name"><i class="fa fa-tag"></i> <span data-i18n="node-red:common.label.name"></span></label>
         <input type="text" id="node-input-name" data-i18n="[placeholder]node-red:common.label.name">
     </div>
-    <div class="form-tips" id="pin-tip">Pins marked in blue are dual use. Make sure they are not enabled for
-    their other use before using as GPIO.</div>
     <div class="form-tips" id="dig-tip"><span data-i18n="[html]pi-gpiod.tip.dig"></span></div>
     <div class="form-tips" id="pwm-tip"><span data-i18n="[html]pi-gpiod.tip.pwm"></span></div>
     <div class="form-tips" id="ser-tip"><span data-i18n="[html]pi-gpiod.tip.ser"></span></div>
+    <div class="form-tips" id="pin-tip">Pins marked in blue are dual use. Make sure they are not enabled for
+    their other use before using as GPIO.</div>
 </script>
 
 <script type="text/x-red" data-help-name="pi-gpiod out">
@@ -427,7 +427,7 @@
     and will set the selected physical pin high or low depending on the value passed in.</p>
     <p>The initial value of the pin at deploy time can also be set to 0 or 1.</p>
     <p>When using PWM and Servo modes, the input value should be a number 0 - 100, and can be floating point.</p>
-    <p>If using with Docker on Pi then the default Host IP should be `172.17.0.1`. You will also need to run `sudo pigpiod` on the host.</p>
+    <p>If using with Docker on Pi then the default Host IP should be <code>172.17.0.1</code>. You will also need to run <code>sudo pigpiod</code> on the host.</p>
     <p><b>Note</b>: the pin numbers refer the physical pin numbers on connector P1 as they are easier to locate.</p>
 </script>
 
@@ -485,7 +485,7 @@
                     $("#pwm-tip").show();
                     $("#ser-tip").hide();
                 }
-                if ($("#node-input-out").val() === "ser") {
+                else if ($("#node-input-out").val() === "ser") {
                     $('#node-set-tick').hide();
                     $('#node-set-state').hide();
                     $('#node-set-minimax').show();