{
    "rpi-gpio": {
        "label": {
            "gpiopin": "GPIO",
            "selectpin": "select pin",
            "resistor": "Resistor?",
            "readinitial": "Read initial state of pin on deploy/restart?",
            "type": "Type",
            "initpin": "Initialise pin state?",
            "debounce": "Debounce",
            "freq": "Frequency",
            "button": "Button",
            "pimouse": "Pi Mouse",
            "pikeyboard": "Pi Keyboard",
            "left": "Left",
            "right": "Right",
            "middle": "Middle"
        },
        "resistor": {
            "none": "none",
            "pullup": "pullup",
            "pulldown": "pulldown"
        },
        "digout": "Digital output",
        "pwmout": "PWM output",
        "servo": "Servo output",
        "initpin0": "initial level of pin - low (0)",
        "initpin1": "initial level of pin - high (1)",
        "left": "left",
        "right": "right",
        "middle": "middle",
        "any": "any",
        "pinname": "Pin",
        "alreadyuse": "already in use",
        "alreadyset": "already set as",
        "tip": {
            "pin": "<b>Pins in Use</b>: ",
            "in": "Tip: Only Digital Input is supported - input must be 0 or 1.",
            "dig": "Tip: For digital output - input must be 0 or 1.",
            "pwm": "Tip: For PWM output - input must be between 0 to 100; setting high frequency might occupy more CPU than expected.",
            "ser": "<b>Tip</b>: For Servo output - input must be between 0 to 100. 50 is centre."
        },
        "types": {
            "digout": "digital output",
            "input": "input",
            "pullup": "input with pull up",
            "pulldown": "input with pull down",
            "pwmout": "PWM output",
            "servo": "Servo output"
        },
        "status": {
            "stopped": "stopped",
            "closed": "closed",
            "not-running": "not running",
            "not-available": "not available",
            "na": "N/A : __value__",
            "ok": "OK"
        },
        "errors": {
            "ignorenode": "Raspberry Pi specific node set inactive",
            "version": "Failed to get version from Pi",
            "sawpitype": "Saw Pi Type",
            "libnotfound": "Cannot find Pi RPi.GPIO python library",
            "alreadyset": "GPIO pin __pin__ already set as type: __type__",
            "invalidpin": "Invalid GPIO pin",
            "invalidinput": "Invalid input",
            "needtobeexecutable": "__command__ needs to be executable",
            "mustbeexecutable": "nrgpio must to be executable",
            "commandnotfound": "nrgpio command not found ",
            "commandnotexecutable": "nrgpio command not executable ",
            "error": "error: __error__",
            "pythoncommandnotfound": "nrgpio python command not running"
        }
    }
}