node-red-node-blink1 ==================== A <a href="http://nodered.org" target="_new">Node-RED</a> node to control a <a href="http://thingm.com/products/blink-1/" target="_new">Thingm Blink(1)</a> LED. Pre-requisites -------------- As the blink1 is a USB HID device you may need some extra hardware libraries as documented <a href="https://www.npmjs.com/package/node-blink1" target="_new">here</a> and <a href="https://github.com/todbot/blink1/blob/master/linux/51-blink1.rules" target="_new">here</a>. Specifically Ubuntu/Debian/Raspbian user may need to sudo apt-get install libusb-1.0-0.dev. Install ------- Run the following command in the user directory of your Node-RED install. This is usually `~/.node-red` npm install node-red-node-blink1 Usage ----- Sends the <b>msg.payload</b> to a Thingm Blink(1) LED device. The payload can be any of the following: - a three part csv string of r,g,b - e.g. red is 255,0,0 - a hex colour #rrggbb - e.g. green is #00FF00 - a <a href="http://www.cheerlights.com/control-cheerlights">@cheerlights</a> colour name - e.g. blue The @cheerlights colours are - red, amber, green, blue, cyan, magenta, yellow, orange, pink, purple, white, warmwhite, black