76 lines
2.8 KiB
JSON
76 lines
2.8 KiB
JSON
{
|
|
"rpi-gpio": {
|
|
"label": {
|
|
"gpiopin": "GPIO",
|
|
"selectpin": "select pin",
|
|
"resistor": "Resistor?",
|
|
"readinitial": "Read initial state of pin on deploy/restart?",
|
|
"type": "Type",
|
|
"initpin": "Initialise pin state?",
|
|
"debounce": "Debounce",
|
|
"freq": "Frequency",
|
|
"button": "Button",
|
|
"pimouse": "Pi Mouse",
|
|
"pikeyboard": "Pi Keyboard",
|
|
"left": "Left",
|
|
"right": "Right",
|
|
"middle": "Middle"
|
|
},
|
|
"resistor": {
|
|
"none": "none",
|
|
"pullup": "pullup",
|
|
"pulldown": "pulldown"
|
|
},
|
|
"digout": "Digital output",
|
|
"pwmout": "PWM output",
|
|
"servo": "Servo output",
|
|
"initpin0": "initial level of pin - low (0)",
|
|
"initpin1": "initial level of pin - high (1)",
|
|
"left": "left",
|
|
"right": "right",
|
|
"middle": "middle",
|
|
"any": "any",
|
|
"pinname": "Pin",
|
|
"alreadyuse": "already in use",
|
|
"alreadyset": "already set as",
|
|
"tip": {
|
|
"pin": "<b>Pins in Use</b>: ",
|
|
"in": "Tip: Only Digital Input is supported - input must be 0 or 1.",
|
|
"dig": "Tip: For digital output - input must be 0 or 1.",
|
|
"pwm": "Tip: For PWM output - input must be between 0 to 100; setting high frequency might occupy more CPU than expected.",
|
|
"ser": "<b>Tip</b>: For Servo output - input must be between 0 to 100. 50 is centre."
|
|
},
|
|
"types": {
|
|
"digout": "digital output",
|
|
"input": "input",
|
|
"pullup": "input with pull up",
|
|
"pulldown": "input with pull down",
|
|
"pwmout": "PWM output",
|
|
"servo": "Servo output"
|
|
},
|
|
"status": {
|
|
"stopped": "stopped",
|
|
"closed": "closed",
|
|
"not-running": "not running",
|
|
"not-available": "not available",
|
|
"na": "N/A : __value__",
|
|
"ok": "OK"
|
|
},
|
|
"errors": {
|
|
"ignorenode": "Raspberry Pi specific node set inactive",
|
|
"version": "Failed to get version from Pi",
|
|
"sawpitype": "Saw Pi Type",
|
|
"libnotfound": "Cannot find Pi RPi.GPIO python library",
|
|
"alreadyset": "GPIO pin __pin__ already set as type: __type__",
|
|
"invalidpin": "Invalid GPIO pin",
|
|
"invalidinput": "Invalid input",
|
|
"needtobeexecutable": "__command__ needs to be executable",
|
|
"mustbeexecutable": "nrgpio must to be executable",
|
|
"commandnotfound": "nrgpio command not found ",
|
|
"commandnotexecutable": "nrgpio command not executable ",
|
|
"error": "error: __error__",
|
|
"pythoncommandnotfound": "nrgpio python command not running"
|
|
}
|
|
}
|
|
}
|