History

Dave C-J 43de38453e Tweak Pibrella package.json (mis-spelt)		2014-07-04 17:25:47 +01:00
..
38-rpi-pibrella.html	correct Blinkstick package.json	2014-07-04 16:11:34 +01:00
38-rpi-pibrella.js	correct Blinkstick package.json	2014-07-04 16:11:34 +01:00
LICENSE	Add Pibrella npm	2014-07-04 16:12:19 +01:00
README.md	Add Pibrella npm	2014-07-04 16:12:19 +01:00
package.json	Tweak Pibrella package.json (mis-spelt)	2014-07-04 17:25:47 +01:00

README.md

node-red-node-pibrella

A Node-RED node to control a Pibrella add-on board for a Raspberry-Pi.

Install

Run the following command in the root directory of your Node-RED install

npm install node-red-node-pibrella

Pre-reqs

Requires the WiringPi gpio command to be installed in order to work. See the WiringPi site for details on how to do this.

Usage

A pair of input and output Node-RED nodes for the Raspberry Pi Pibrella from Pimoroni.

###Output

The output node will set the selected output high (on) or low (off) depending on the value passed in. Expects a msg.payload with either a 0 or 1 (or true or false).

The Buzzer is a divider so low numbers are high notes. 0 is off, and the sensible lowest note is around 250-300. 2 is the highest note. 1 is just a buzz - so you can use 0/1 type inputs.

###Input

The input node generates a msg.payload with either a 0 or 1 depending on the state of the input pin.

The msg.topic is set to pibrella/{the pin id} - which will be A, B, C, D or R.

Note: This node currently polls the pin every 250mS. This is not ideal as it loads the cpu.