74 lines
3.0 KiB
JSON
74 lines
3.0 KiB
JSON
{
|
|
"serial": {
|
|
"status": {
|
|
"waiting": "waiting",
|
|
"timeout": "timeout"
|
|
},
|
|
"label": {
|
|
"serialport": "Serial Port",
|
|
"settings": "Settings",
|
|
"baudrate": "Baud Rate",
|
|
"databits": "Data Bits",
|
|
"parity": "Parity",
|
|
"stopbits": "Stop Bits",
|
|
"input": "Input",
|
|
"split": "Split input",
|
|
"deliver": "and deliver",
|
|
"output": "Output",
|
|
"request": "Request",
|
|
"responsetimeout": "Default response timeout",
|
|
"ms": "ms",
|
|
"serial": "serial",
|
|
"none": "none",
|
|
"start": "Optionally wait for a start character of",
|
|
"startor": ", then"
|
|
},
|
|
"placeholder": {
|
|
"serialport": "for example: /dev/ttyUSB0/"
|
|
},
|
|
"parity": {
|
|
"none": "None",
|
|
"even": "Even",
|
|
"mark": "Mark",
|
|
"odd": "Odd",
|
|
"space": "Space"
|
|
},
|
|
"linestates": {
|
|
"none": "auto",
|
|
"high": "High",
|
|
"low": "Low"
|
|
},
|
|
"split": {
|
|
"character": "on the character",
|
|
"timeout": "after a timeout of",
|
|
"silent": "after a silence of",
|
|
"lengths": "into fixed lengths of"
|
|
},
|
|
"output": {
|
|
"ascii": "ASCII strings",
|
|
"binary": "binary buffers"
|
|
},
|
|
"addsplit": "Add character to output messages",
|
|
"tip": {
|
|
"responsetimeout": "Tip: The default response timeout can be overridden by setting msg.timeout.",
|
|
"split": "Tip: the \"Split on\" character is used to split the input into separate messages. Can accept chars ($), escape codes (\\n), or hex codes (0x03).",
|
|
"silent": "Tip: In line-silent mode timeout is restarted upon arrival of any character (i.e. inter-byte timeout).",
|
|
"timeout": "Tip: In timeout mode timeout starts from arrival of first character.",
|
|
"count": "Tip: In count mode msg.count can override the configured count as long as it smaller than the configured value.",
|
|
"waitfor": "Tip: Optional. Leave blank to receive all data. Can accept chars ($), escape codes (\\n), or hex codes (0x02)." ,
|
|
"addchar": "Tip: This character is added to every message sent out to the serial port. Usually \\r or \\n."
|
|
},
|
|
"onopen": "serial port __port__ opened at __baud__ baud __config__",
|
|
"errors": {
|
|
"missing-conf": "missing serial config",
|
|
"serial-port": "serial port",
|
|
"error": "serial port __port__ error: __error__",
|
|
"unexpected-close": "serial port __port__ closed unexpectedly",
|
|
"disconnected": "serial port __port__ disconnected",
|
|
"closed": "serial port __port__ closed",
|
|
"list": "Failed to list ports. Please enter manually.",
|
|
"badbaudrate": "Baudrate is invalid"
|
|
}
|
|
}
|
|
}
|