mirror of
https://github.com/node-red/node-red-nodes.git
synced 2023-10-10 13:36:58 +02:00
|
||
---|---|---|
.. | ||
scripts | ||
79-sensorTag.html | ||
79-sensorTag.js | ||
LICENSE | ||
package.json | ||
README.md |
node-red-node-sensortag
This node adds support to Node-RED to read from the Texas Instruments SensorTag.
Pre-requisites
You will need a suitable Bluetooth Low Energy (BLE) stack and drivers for your hardware
- for example Bluez 5.2.x or better.
Raspberry Pi
Install Bluetooth drivers and bluez stack, and set executable by non-root user
sudo apt-get install libbluetooth-dev libudev-dev pi-bluetooth
sudo setcap cap_net_raw+eip $(eval readlink -f `which node`)
Install
Run the following command in your Node-RED user directory - typically ~/.node-red
npm i node-red-node-sensortag
Usage
The SensorTag is a Bluetooth LE device hosting the following sensors:
- Humidity and Temperature
- Ambient & IR Temperatures
- Barometric Pressure
- 3 axis Accelerometer
- 3 axis Gyroscope
- 3 axis Magnetometer
- 2 push Buttons
- 1 Luxometer (CC2650 version only)
The config node allows the user to enable/disable any of the sensors listed above. The readings from these sensors will be sent as a JSON object payload with the sensor name appended to the topic provided:
- Humidity - { topic: [topic_prefix]/humidity , payload: { temp: 21.2, humidity: 88} }
- Temperature - { topic: [topic_prefix]/temperature, payload: { ambient: 21.2, object: 33.0 } }
- Barometric Pressure - { topic: [topic_prefix]/pressure, payload: { pres: 1000 } }
- Accelerometer - { topic: [topic_prefix]/accelerometer , payload: { x:0.0, y:9.8, z:0.0 } }
- Magnetometer - { topic: [topic_prefix]/magnetometer , payload: { x:0.0, y:0.0, z:0.0 } }
- Gyroscope - { topic: [topic_prefix]/gyroscope , payload: { x:0.0, y:0.0, z:0.0 } }
- Luxometer - { topic: [topic_prefix]/luxometer , payload: { lux: 212 } }
- Buttons - { topic: [topic_prefix]/keys , payload: { left: true, right: false} }
Note: This sensorTag library only supports using 1 SensorTag at a time.