1
0
mirror of https://github.com/node-red/node-red-nodes.git synced 2023-10-10 13:36:58 +02:00
node-red-nodes/io/serialport/locales/en-US/25-serial.json
Dave Conway-Jones 676ba58210
slight tidy to serialport PR and bump version
adds flags for fixing DSR, DTR, RTS, CTS
2019-12-04 15:06:40 +00:00

72 lines
2.8 KiB
JSON

{
"serial": {
"status": {
"waiting": "waiting",
"timeout": "timeout"
},
"label": {
"serialport": "Serial Port",
"settings": "Settings",
"baudrate": "Baud Rate",
"databits": "Data Bits",
"parity": "Parity",
"stopbits": "Stop Bits",
"input": "Input",
"split": "Split input",
"deliver": "and deliver",
"output": "Output",
"request": "Request",
"responsetimeout": "Default response timeout",
"ms": "ms",
"serial": "serial",
"none": "none",
"start": "Optionally wait for a start character of",
"startor": ", then"
},
"placeholder": {
"serialport": "for example: /dev/ttyUSB0/"
},
"parity": {
"none": "None",
"even": "Even",
"mark": "Mark",
"odd": "Odd",
"space": "Space"
},
"linestates": {
"none": "auto",
"high": "High",
"low": "Low"
},
"split": {
"character": "on the character",
"timeout": "after a timeout of",
"silent": "after a silence of",
"lengths": "into fixed lengths of"
},
"output": {
"ascii": "ascii strings",
"binary": "binary buffers"
},
"addsplit": "Add character to output messages",
"tip": {
"responsetimeout": "Tip: The default response timeout can be overridden by setting msg.timeout.",
"split": "Tip: the \"Split on\" character is used to split the input into separate messages. Can accept chars ($), escape codes (\\n), or hex codes (0x03).",
"silent": "Tip: In line-silent mode timeout is restarted upon arrival of any character (i.e. inter-byte timeout).",
"timeout": "Tip: In timeout mode timeout starts from arrival of first character.",
"count": "Tip: In count mode msg.count can override the configured count as long as it smaller than the configured value.",
"waitfor": "Tip: Optional. Leave blank to receive all data. Can accept chars ($), escape codes (\\n), or hex codes (0x02)." ,
"addchar": "Tip: This character is added to every message sent out to the serial port. Usually \\r or \\n."
},
"onopen": "serial port __port__ opened at __baud__ baud __config__",
"errors": {
"missing-conf": "missing serial config",
"serial-port": "serial port",
"error": "serial port __port__ error: __error__",
"unexpected-close": "serial port __port__ closed unexpectedly",
"disconnected": "serial port __port__ disconnected",
"closed": "serial port __port__ closed"
}
}
}