mirror of
https://github.com/node-red/node-red-nodes.git
synced 2025-12-26 23:16:47 +01:00
53 lines
2.4 KiB
JSON
53 lines
2.4 KiB
JSON
{
|
|
"arduino": {
|
|
"label": {
|
|
"pin": "Pin:",
|
|
"type": "Type:",
|
|
"port": "Port:",
|
|
"name": "Name:",
|
|
"samplingInt": "Sampling interval:"
|
|
},
|
|
"placeholder": {
|
|
"port": "(like: COM1 or /dev/ttyUSB0)",
|
|
"samplingInt": "(10 - 65535)"
|
|
},
|
|
"status": {
|
|
"connectfirst": "connecting to first board found",
|
|
"connect": "connecting to __device__",
|
|
"connected": "connected to __device__",
|
|
"version": "version: __version__",
|
|
"portclosed": "Arduino serial port closed"
|
|
},
|
|
"state": {
|
|
"in": {
|
|
"digital": "Digital pin",
|
|
"pullup": "Digital pin with pullup",
|
|
"analogue": "Analogue pin",
|
|
"string": "String"
|
|
},
|
|
"out": {
|
|
"digital": "Digital (0/1)",
|
|
"analogue": "Analogue (0-255)",
|
|
"servo": "Servo (0-180)",
|
|
"string": "String",
|
|
"reset": "Reset Board on .payload=true",
|
|
"interval": "Set new sampling interval"
|
|
}
|
|
},
|
|
"tip": {
|
|
"io": "<b>Note:</b> You cannot use the same pin for both output and input",
|
|
"port": "<p>On Unix/linux systems, it is recommended to choose the serial port at: <b>by-id</b> path, so it is fixed, no matter if the USB gets re-plugged.</p><p><i>(It will look like this:</i> <code>/dev/serial/by-id/usb-Arduino_RPi_Pico_0764FE3-if00</code>)</p>",
|
|
"search": "<b>Tip:</b> Use search button to try to auto-detect serial port.",
|
|
"pin": "<b>Analogue pins:</b> usually between: <b>0..7</b><br>RPi-Pico has a built-in temperature reader at: <b>A03</b>",
|
|
"log2consol": "<b>To view Logs:</b> If you started node-red in a console, you will be able to see them there. Otherwise type in a console/terminal:<code> node-red-log </code>",
|
|
"otherboards": "To use this module with Raspberry Pi Pico or ESP32, you need to flash the chip with a Configurable-Firmata firmware e.g. https://github.com/firmata/ConfigurableFirmata",
|
|
"more-at-help": "See more info at the Help tab."
|
|
},
|
|
"errors": {
|
|
"portnotconf": "port not configured",
|
|
"portnotfound": "port not found / not accessible: __device__",
|
|
"devnotfound": "device __dev__ not found. Trying to find board."
|
|
}
|
|
}
|
|
}
|