1
0
mirror of https://github.com/node-red/node-red-nodes.git synced 2023-10-10 13:36:58 +02:00
node-red-nodes/hardware/PiGpio/locales/en-US/36-rpi-gpio.json
2019-10-06 09:51:26 +01:00

76 lines
2.8 KiB
JSON

{
"rpi-gpio": {
"label": {
"gpiopin": "GPIO",
"selectpin": "select pin",
"resistor": "Resistor?",
"readinitial": "Read initial state of pin on deploy/restart?",
"type": "Type",
"initpin": "Initialise pin state?",
"debounce": "Debounce",
"freq": "Frequency",
"button": "Button",
"pimouse": "Pi Mouse",
"pikeyboard": "Pi Keyboard",
"left": "Left",
"right": "Right",
"middle": "Middle"
},
"resistor": {
"none": "none",
"pullup": "pullup",
"pulldown": "pulldown"
},
"digout": "Digital output",
"pwmout": "PWM output",
"servo": "Servo output",
"initpin0": "initial level of pin - low (0)",
"initpin1": "initial level of pin - high (1)",
"left": "left",
"right": "right",
"middle": "middle",
"any": "any",
"pinname": "Pin",
"alreadyuse": "already in use",
"alreadyset": "already set as",
"tip": {
"pin": "<b>Pins in Use</b>: ",
"in": "Tip: Only Digital Input is supported - input must be 0 or 1.",
"dig": "Tip: For digital output - input must be 0 or 1.",
"pwm": "Tip: For PWM output - input must be between 0 to 100; setting high frequency might occupy more CPU than expected.",
"ser": "<b>Tip</b>: For Servo output - input must be between 0 to 100. 50 is centre."
},
"types": {
"digout": "digital output",
"input": "input",
"pullup": "input with pull up",
"pulldown": "input with pull down",
"pwmout": "PWM output",
"servo": "Servo output"
},
"status": {
"stopped": "stopped",
"closed": "closed",
"not-running": "not running",
"not-available": "not available",
"na": "N/A : __value__",
"ok": "OK"
},
"errors": {
"ignorenode": "Raspberry Pi specific node set inactive",
"version": "Failed to get version from Pi",
"sawpitype": "Saw Pi Type",
"libnotfound": "Cannot find Pi RPi.GPIO python library",
"alreadyset": "GPIO pin __pin__ already set as type: __type__",
"invalidpin": "Invalid GPIO pin",
"invalidinput": "Invalid input",
"needtobeexecutable": "__command__ needs to be executable",
"mustbeexecutable": "nrgpio must to be executable",
"commandnotfound": "nrgpio command not found",
"commandnotexecutable": "nrgpio command not executable",
"error": "error: __error__",
"pythoncommandnotfound": "nrgpio python command not running"
}
}
}