1
0
mirror of https://github.com/node-red/node-red-nodes.git synced 2023-10-10 13:36:58 +02:00
node-red-nodes/hardware/pigpiod/locales/en-US/pi-gpiod.json
Dave Conway-Jones fc249b6792
Add PiGPIOd node
alternative to Pi GPIO nodes with remote access
2017-04-14 21:37:44 +01:00

58 lines
1.9 KiB
JSON

{
"pi-gpiod": {
"label": {
"gpiopin": "GPIO",
"selectpin": "select pin",
"host": "Host",
"resistor": "Resistor?",
"readinitial": "Read initial state of pin on deploy/restart?",
"type": "Type",
"initpin": "Initialise pin state?",
"debounce": "Debounce",
"limits": "Limits",
"min": "min",
"max": "max"
},
"place": {
"host": "local or remote ip",
"port": "port"
},
"resistor": {
"none": "none",
"pullup": "pullup",
"pulldown": "pulldown"
},
"digout": "Digital output",
"pwmout": "PWM output",
"servo": "Servo output",
"initpin0": "initial level of pin - low (0)",
"initpin1": "initial level of pin - high (1)",
"pinname": "Pin",
"tip": {
"pin": "<b>Pins in Use</b>: ",
"in": "<b>Tip</b>: Only Digital Input is supported - input must be 0 or 1.",
"dig": "<b>Tip</b>: For digital output - input must be 0 or 1.",
"pwm": "<b>Tip</b>: For PWM output - input must be between 0 to 100.",
"ser": "<b>Tip</b>: For Servo output - input must be between 0 to 100. 50 is centre.<br/>Min must be 5mS or more, Max must be 25mS or less."
},
"types": {
"digout": "digital output",
"input": "input",
"pullup": "input with pull up",
"pulldown": "input with pull down",
"pwmout": "PWM output",
"servo": "Servo output"
},
"status": {
"stopped": "stopped",
"closed": "closed",
"not-running": "not running"
},
"errors": {
"invalidpin": "Invalid GPIO pin",
"invalidinput": "Invalid input",
"error": "error: __error__"
}
}
}