node-red/nodes/core/hardware/36-rpi-gpio.html

<!--
  Copyright 2013,2014 IBM Corp.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

  http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
-->

<script type="text/x-red" data-template-name="rpi-gpio in">
    <div class="form-row">
        <label for="node-input-pin"><i class="fa fa-circle"></i> GPIO Pin</label>
        <select type="text" id="node-input-pin" style="width: 200px;">
            <option value="-" disabled>select pin </option>
            <option value="3">3 - SDA1 </option>
            <option value="5">5 - SCL1 </option>
            <option value="7">7 - GPIO7</option>
            <option value="8">8 - TxD </option>
            <option value="10">10 - RxD </option>
            <option value="11">11 - GPIO0</option>
            <option value="12">12 - GPIO1</option>
            <option value="13">13 - GPIO2</option>
            <option value="15">15 - GPIO3</option>
            <option value="16">16 - GPIO4</option>
            <option value="18">18 - GPIO5</option>
            <option value="19">19 - MOSI </option>
            <option value="21">21 - MISO </option>
            <option value="22">22 - GPIO6</option>
            <option value="23">23 - SCLK </option>
            <option value="24">24 - CE0 </option>
            <option value="26">26 - CE1 </option>
         </select>
         &nbsp;<span id="pitype"></span>
    </div>
    <div class="form-row">
        <label for="node-input-intype"><i class="fa fa-long-arrow-up"></i> Resistor ?</label>
        <select type="text" id="node-input-intype" style="width: 150px;">
        <option value="tri">none</option>
        <option value="up">pullup</option>
        <option value="down">pulldown</option>
        <!--<option value="tri">tristate</option>-->
        </select>
    </div>
    <div class="form-row">
        <label>&nbsp;</label>
        <input type="checkbox" id="node-input-read" style="display: inline-block; width: auto; vertical-align: top;">
        <label for="node-input-read" style="width: 70%;">Read initial state of pin on deploy ?</label>
    </div>
    <div class="form-row">
        <label for="node-input-name"><i class="fa fa-tag"></i> Name</label>
        <input type="text" id="node-input-name" placeholder="Name">
    </div>
    <div class="form-tips">Tip: Only Digital I/O is supported - input must be 0 or 1.</div>
</script>

<script type="text/x-red" data-help-name="rpi-gpio in">
    <p>Raspberry Pi input node. Generates a <b>msg.payload</b> with either a 0 or 1 depending on the state of the input pin. Requires the gpio command to work.</p>
    <p>You may also enable the input pullup resitor or the pulldown resistor.</p>
    <p>The <b>msg.topic</b> is set to <i>pi/{the pin number}</i></p>
    <p><b>Note:</b> we are using the actual physical pin numbers on connector P1 as they are easier to locate.</p>
    <p><b>Note:</b> This node currently polls the pin every 250mS. This is not ideal as it loads the cpu, and should be rewritten to try to use interrupts.</p>
</script>

<script type="text/javascript">
    RED.nodes.registerType('rpi-gpio in',{
        category: 'Raspberry Pi',
        color:"#c6dbef",
        defaults: {
            name: { value:"" },
            pin: { value:"",required:true,validate:RED.validators.number() },
            intype: { value: "in" },
            read: { value:false }
        },
        inputs:0,
        outputs:1,
        icon: "rpi.png",
        label: function() {
            return this.name||"Pin: "+this.pin ;
        },
        labelStyle: function() {
            return this.name?"node_label_italic":"";
        },
        oneditprepare: function() {
            $.getJSON('rpi-gpio/'+this.id,function(data) {
                $('#pitype').text(data.type);
                if (data.type === "Model B+") {
                    $('#node-input-pin').append($("<option></option>").attr("value",27).text("27 - SDA0"));
                    $('#node-input-pin').append($("<option></option>").attr("value",28).text("28 - SCL0"));
                    $('#node-input-pin').append($("<option></option>").attr("value",29).text("29 - GPIO21"));
                    $('#node-input-pin').append($("<option></option>").attr("value",31).text("31 - GPIO22"));
                    $('#node-input-pin').append($("<option></option>").attr("value",32).text("32 - GPIO26"));
                    $('#node-input-pin').append($("<option></option>").attr("value",33).text("33 - GPIO23"));
                    $('#node-input-pin').append($("<option></option>").attr("value",35).text("35 - GPIO24"));
                    $('#node-input-pin').append($("<option></option>").attr("value",36).text("36 - GPIO27"));
                    $('#node-input-pin').append($("<option></option>").attr("value",37).text("37 - GPIO25"));
                    $('#node-input-pin').append($("<option></option>").attr("value",38).text("38 - GPIO28"));
                    $('#node-input-pin').append($("<option></option>").attr("value",40).text("40 - GPIO29"));
                }
            });
        }
    });
</script>


<script type="text/x-red" data-template-name="rpi-gpio out">
    <div class="form-row">
        <label for="node-input-pin"><i class="fa fa-circle"></i> GPIO Pin</label>
        <select type="text" id="node-input-pin" style="width: 200px;">
            <option value="-">select pin </option>
            <option value="3">3 - SDA1 </option>
            <option value="5">5 - SCL1 </option>
            <option value="7">7 - GPIO7</option>
            <option value="8">8 - TxD </option>
            <option value="10">10 - RxD </option>
            <option value="11">11 - GPIO0</option>
            <option value="12">12 - GPIO1</option>
            <option value="13">13 - GPIO2</option>
            <option value="15">15 - GPIO3</option>
            <option value="16">16 - GPIO4</option>
            <option value="18">18 - GPIO5</option>
            <option value="19">19 - MOSI </option>
            <option value="21">21 - MISO </option>
            <option value="22">22 - GPIO6</option>
            <option value="23">23 - SCLK </option>
            <option value="24">24 - CE0 </option>
            <option value="26">26 - CE1 </option>
         </select>
         &nbsp;<span id="pitype"></span>
    </div>
    <div class="form-row">
        <label>&nbsp;</label>
        <input type="checkbox" id="node-input-set" style="display: inline-block; width: auto; vertical-align: top;">
        <label for="node-input-set" style="width: 70%;">Initialise pin state ?</label>
    </div>
    <div class="form-row" id="node-set-state">
        <label for="node-input-level">&nbsp;</label>
        <select id="node-input-level" style="width: 300px;">
            <option value="0">initial level of pin - low (0)</option>
            <option value="1">initial level of pin - high (1)</option>
        </select>
    </div>
    <div class="form-row">
        <label for="node-input-name"><i class="fa fa-tag"></i> Name</label>
        <input type="text" id="node-input-name" placeholder="Name">
    </div>
    <div class="form-tips">Tip: Only Digital I/O is supported - input must be 0 or 1.</div>
</script>

<script type="text/x-red" data-help-name="rpi-gpio out">
    <p>Raspberry Pi output node. Expects a <b>msg.payload</b> with either a 0 or 1 (or true or false). Requires the gpio command to work.</p>
    <p>Will set the selected physical pin high or low depending on the value passed in.</p>
    <p>The initial value of the pin at deploy time can also be set to 0 or 1.</p>
    <p><b>Note:</b> we are using the actual physical pin numbers on connector P1 as they are easier to locate.</p>
</script>

<script type="text/javascript">
    RED.nodes.registerType('rpi-gpio out',{
        category: 'Raspberry Pi',
        color:"#c6dbef",
        defaults: {
            name: { value:"" },
            pin: { value:"",required:true,validate:RED.validators.number() },
            set: { value:false },
            level: { value:"0" }
        },
        inputs:1,
        outputs:0,
        icon: "rpi.png",
        align: "right",
        label: function() {
            return this.name||"Pin: "+this.pin;
        },
        labelStyle: function() {
            return this.name?"node_label_italic":"";
        },
        oneditprepare: function() {
            $.getJSON('rpi-gpio/'+this.id,function(data) {
                $('#pitype').text(data.type);
                if (data.type === "Model B+") {
                    $('#node-input-pin').append($("<option></option>").attr("value",27).text("27 - SDA0"));
                    $('#node-input-pin').append($("<option></option>").attr("value",28).text("28 - SCL0"));
                    $('#node-input-pin').append($("<option></option>").attr("value",29).text("29 - GPIO21"));
                    $('#node-input-pin').append($("<option></option>").attr("value",31).text("31 - GPIO22"));
                    $('#node-input-pin').append($("<option></option>").attr("value",32).text("32 - GPIO26"));
                    $('#node-input-pin').append($("<option></option>").attr("value",33).text("33 - GPIO23"));
                    $('#node-input-pin').append($("<option></option>").attr("value",35).text("35 - GPIO24"));
                    $('#node-input-pin').append($("<option></option>").attr("value",36).text("36 - GPIO27"));
                    $('#node-input-pin').append($("<option></option>").attr("value",37).text("37 - GPIO25"));
                    $('#node-input-pin').append($("<option></option>").attr("value",38).text("38 - GPIO28"));
                    $('#node-input-pin').append($("<option></option>").attr("value",40).text("40 - GPIO29"));
                }
            });

            $("#node-input-set").change(function() {
                if ($('#node-input-set').is(":checked")) {
                    $("#node-set-state").show();
                } else {
                    $("#node-set-state").hide();
                }
            });
        }
    });
</script>